OScam --> CCcam: Alles okay und trotzdem dunkel

tobias2k · 30. März 2014

Hallo zusammen,

ich versuche nun schon seit 3 Stunden verzweifelt meinen Raspberry Pi unter Oscam mit meinen Clients ans Laufen zu bekommen.
Obwohl die beiden Karten einwandfrei initiiert werden und der Testclient connecten kann, werden einfach keine ECMs abgefragt. Dementsprechend bleibt alles dunkel

Zur Hardware:
- Raspberry PI mit Debian und IPC als OS
- 2x Maxdigital Smargos 1.5
- je eine Sky S02 und HD01 Karte.

Oscam Conf:

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9578# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 0
loghistorysize = 4096
serverip = 192.168.2.120
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[cccam]
port = 11499
serverip = 0.0.0.0
nodeid = 2E8F3555107B1406
version = 2.1.1
reshare = -1
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httphelplang = en
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = Oscam

User conf:

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9578# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]disabled = 0
user = eltern
pwd = oben
description = Eltern
hostname =
caid = 1702,1833,1830
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = 0
keepalive = 1
au = 1
emmreassembly = 2
expdate =
allowedprotocols = cccam
allowedtimeframe =
betatunnel = 1833.FFFF:1702
group = 1
services =
ident =
chid =
class =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cccmaxhops = 10
cccreshare = -1
cccignorereshare = 0
cccstealth = -1
fakedelay = -1
numusers = -1
penalty = -1
lb_nbest_readers = -1
lb_nfb_readers = -1
lb_nbest_percaid =

Oscam server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9578# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Sky
description = Sky
enable = 1
protocol = smartreader
device = Serial:Reader 755F107
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid =
atr =
boxid =
boxkey = 1122334455667788
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 961
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,10
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

[reader]
label = HDPlus
description = HDPlus
enable = 1
protocol = smartreader
device = Serial:Reader 7207047
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid =
atr =
boxid =
boxkey = AxxxxxxxC
rsakey = Bxxxxxxxxx5
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 534
cardmhz = 480
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,10
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Logifile Start

2014/03/30 12:03:16 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9578 (arm-linux-gnueabihf)
2014/03/30 12:03:16 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 16963
2014/03/30 12:03:16 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/03/30 12:03:16 0 s userdb reloaded: 6 accounts loaded, 0 expired, 1 disabled
2014/03/30 12:03:16 0 s signal handling initialized
2014/03/30 12:03:16 0 s newcamd: initialized (fd=5, port=22000, ip=192.168.2.120)
2014/03/30 12:03:16 0 s -> CAID: 1830 PROVID: 003411
2014/03/30 12:03:16 0 s cccam: initialized (fd=6, port=11499, ip=192.168.2.120)
2014/03/30 12:03:16 0 s Sky [smartreader] creating thread for device Serial:Reader 755F107
2014/03/30 12:03:16 0 s HDPlus [smartreader] creating thread for device Serial:Reader 7207047
2014/03/30 12:03:16 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/03/30 12:03:16 0 s waiting for local card init
2014/03/30 12:03:16 D9A590 r Sky [smartreader] De SR_init
2014/03/30 12:03:16 D9A590 r Sky [smartreader] initing smargo type SR
2014/03/30 12:03:16 D9A590 r Sky [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] De SR_init
2014/03/30 12:03:16 D9A590 r Found reader with serial Reader 755F107 at 001:006
2014/03/30 12:03:16 D9A590 r Found smartreader device Serial:Reader 755F107
2014/03/30 12:03:16 DAB3E8 h webif: decompressed 137586 bytes back into 349420 bytes
2014/03/30 12:03:16 DAB3E8 h HTTP Server running. ip=192.168.2.120 port=16002
2014/03/30 12:03:16 D9A590 r Sky [smartreader] Creating smartreader thread.
2014/03/30 12:03:16 D9A590 r Sky [smartreader] clocking for smartreader with smartreader protocol
2014/03/30 12:03:16 D9A590 r Sky [smartreader] Reader initialized (device=Serial:Reader 755F107, detect=cd, mhz= AUTO, cardmhz=961)
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] initing smargo type SR
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/03/30 12:03:16 D9C290 r Found reader with serial Reader 7207047 at 001:007
2014/03/30 12:03:16 D9C290 r Found smartreader device Serial:Reader 7207047
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] Creating smartreader thread.
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] clocking for smartreader with smartreader protocol
2014/03/30 12:03:16 D9C290 r HDPlus [smartreader] Reader initialized (device=Serial:Reader 7207047, detect=cd, mhz= AUTO, cardmhz=480)
2014/03/30 12:03:17 D9C290 r HDPlus [smartreader] card detected
2014/03/30 12:03:17 D9C290 r HDPlus [smartreader] init card at 369 mhz
2014/03/30 12:03:17 D9A590 r Sky [smartreader] card detected
2014/03/30 12:03:17 D9A590 r Sky [smartreader] init card at 369 mhz
2014/03/30 12:03:21 D9C290 r HDPlus [smartreader] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/03/30 12:03:21 D9C290 r HDPlus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/03/30 12:03:21 D9C290 r HDPlus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2014/03/30 12:03:21 D9C290 r HDPlus [smartreader] autospeed = 1
2014/03/30 12:03:21 D9C290 r HDPlus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2014/03/30 12:03:22 D9C290 r HDPlus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/03/30 12:03:22 D9C290 r HDPlus [smartreader] Card responded ok for ifsd request of 251
2014/03/30 12:03:23 D9C290 r HDPlus [smartreader] detect native nagra card
2014/03/30 12:03:24 D9C290 r HDPlus [smartreader] found card system nagra
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] ROM: D N A S P 1 4 2
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] REV: R e v G C 6
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] SER: ############
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] CAID: 1830
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] Prv.ID: 00 00 00 00
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] IRD ID: ############
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] active to: 2014/05/13 12:59
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] -----------------------------------------
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] |id |tier |valid from |valid to |
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] +----+--------+------------+------------+
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] |8011|0064 |2010/11/03 |2011/11/04 |
2014/03/30 12:03:24 D9C290 r HDPlus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/03/30 12:03:25 D9C290 r HDPlus [nagra] |8011|0BEA |2011/10/31 |2014/12/24 |
2014/03/30 12:03:25 D9C290 r HDPlus [nagra] -----------------------------------------
2014/03/30 12:03:25 D9C290 r HDPlus [nagra] ready for requests
2014/03/30 12:03:26 D9A590 r Sky [smartreader] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/03/30 12:03:26 D9A590 r Sky [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/03/30 12:03:26 D9A590 r Sky [smartreader] Calculated work ETU is 93.00 us reader mhz = 600
2014/03/30 12:03:26 D9A590 r Sky [smartreader] autospeed = 1
2014/03/30 12:03:26 D9A590 r Sky [smartreader] Effective reader settings mhz =600 F= 558 D= 1 N=0 T=14 inv=0 parity=NONE
2014/03/30 12:03:27 D9A590 r Sky [smartreader] ATR Fsmax is 6 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 6.00 MHz (specified in reader->mhz)
2014/03/30 12:03:28 D9A590 r Sky [smartreader] detect irdeto tunneled nagra card
2014/03/30 12:03:28 D9A590 r Sky [smartreader] no rsa key configured -> using irdeto mode
2014/03/30 12:03:28 D9A590 r Sky [smartreader] detect irdeto card
2014/03/30 12:03:28 D9A590 r Sky [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/03/30 12:03:28 D9A590 r Sky [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/03/30 12:03:31 D9A590 r Sky [smartreader] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/03/30 12:03:31 D9A590 r Sky [smartreader] active providers: 2 (000000,000000)
2014/03/30 12:03:31 D9A590 r Sky [smartreader] found card system irdeto
2014/03/30 12:03:31 D9A590 r Sky [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/30 12:03:31 D9A590 r Sky [irdeto] entitlements for provider: 2, id: 000000
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 0107, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 0108, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 7D2B, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 7D24, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 7D23, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 61BD, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 04BA, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 04C4, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 7D2C, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:31 D9A590 r Sky [irdeto] chid: 7D2D, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03EB, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03F6, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03F9, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0401, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0402, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03F7, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0403, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0404, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03FA, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 041A, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 000F, date: 2013/10/18 - 2014/05/19
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 7D21, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03DE, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03DF, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0400, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03F1, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03EA, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03F2, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 7D27, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03FD, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 00F0, date: 2013/10/18 - 2014/05/11
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 03E8, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0514, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 044C, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 00F5, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0069, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 0102, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 026C, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 028B, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:32 D9A590 r Sky [irdeto] chid: 028C, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 028D, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 028E, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 028F, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0290, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 029E, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0291, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0292, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0293, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0294, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:33 D9A590 r Sky [irdeto] chid: 0295, date: 2008/01/19 - 2008/01/21
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 04CE, date: 2013/10/18 - 2014/05/11
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05F2, date: 2014/03/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05F4, date: 2014/03/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05DD, date: 2013/10/18 - 2014/05/11
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05DE, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05F1, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05E7, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05FC, date: 2014/03/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 05DF, date: 2013/10/18 - 2014/05/18
2014/03/30 12:03:34 D9A590 r Sky [irdeto] chid: 0515, date: 2008/01/19 - 2008/09/29
2014/03/30 12:03:35 D9A590 r Sky [irdeto] ready for requests

Mittels CCcam kann ich zwar problemlos connecten, jedoch werden weder geteilte Karten noch unter Providers oder Entitlements etwas angezeigt:

Du musst angemeldet sein, um Bilder zu sehen.

Habt Ihr eine Idee?
Ich bin jedenfalls langsam am verzweifeln ...

czutok · 30. März 2014

AW: OScam --> CCcam: Alles okay und trotzdem dunkel

cccreshare = -1 im oscam cfg. umschreiben

du hast zwar verbindung , blokst aber die karten

leyla38 · 30. März 2014

AW: OScam --> CCcam: Alles okay und trotzdem dunkel

Stell mach im oscam.conf den parameter

Code:

[COLOR=#000000][FONT=monospace]httpsavefullcfg = 0[/FONT][/COLOR]

Damit wir hier Übersicht haben!

tobias2k · 30. März 2014

AW: OScam --> CCcam: Alles okay und trotzdem dunkel

czutok schrieb:
cccreshare = -1 im oscam cfg. umschreiben

du hast zwar verbindung , blokst aber die karten

Danke, genau das war die Lösung des Rätsels!
Kaum abgeändert, schon ging es wieder.

Danke nochmals!

Suche

Suche

OScam --> CCcam: Alles okay und trotzdem dunkel

tobias2k

Ist gelegentlich hier

czutok

leyla38

Super Elite User

tobias2k

Ist gelegentlich hier

Ähnliche Themen

Spenden Unterstützung