Newcs NewCS + CCcam Hilfe Bitte.

[darkraver040925]

ich hab hier unter xp eine smartmaus dran und hab auch schon zig hundert configs getestet aber ich bekomm das einfach nicht hin.

ist hier denn jemand der mir fuer mein newcs 1.17 eine newcs.xml posten kann.. und dazu bitte auch die zugehoerige cccam.cfg

ich bin echt am verzweifeln und hab keine ahnung wo der fehler liegt..

 

[carhatt]

AW: NewCS + CCcam Hilfe Bitte.

hi

wie sieht den deine xml aus? Welche karte haste du? wie sieht dein cccam config aus?

 

[darkraver040925]

AW: NewCS + CCcam Hilfe Bitte.

also ich hab eine p******e S02 karte

configs hab ich garkeine..

meine bitte war ja mir eine xml und eine cfg zu posten die zueinander passen...

 

[carhatt]

AW: NewCS + CCcam Hilfe Bitte.

ich kann dir schon meine xml posten ob sie dir hilfe weiss ich nicht aber bei mir funktioniert sie in verbindung mit newcamd sollte aber auch mit cccam funktionieren.

du musst am anfang bei reader name,typ usw deine daten angeben genauso wie bei localhost dein ip s eintragen bei user musst du das ganze natürlich auch anpassen. die cccam line sollte dann galub ich so etwa aussehn.

N: dummy dummy 15000 0102030405060708091011121314

Hilfreich wäre auch mal eine log oder wo es bei dir hängt dann kann mann dir genauer helfen

hier mal mein xml

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>

<boxkey>00000000</boxkey> 
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
 <httpd>
        <server>
         <port>8080</port> 
         <enabled>yes</enabled> 
        </server>
  <user>
    <name>newcs</name> 
    <password>newcs</password> 
    <accesslevel>admin</accesslevel> 
  </user>
  </httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>0102030405060708091011121314</deskey>
<user><status>access</status>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>off</spider>
<rate>2</rate>
</user>
<user>
<name>test</name>
<password>test</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>3</rate>
</user>
</newCSconfig>

 

[darkraver040925]

AW: NewCS + CCcam Hilfe Bitte.

also hier meine xml

<?xml version="1.0"?>
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>COM1</node>
<parity>ODD</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>yES</blocksa>
<blockua>No</blockua>
<blockga>YES</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile>logfile.txt</logfile>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
<udp_host>192.168.1.2</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>192.168.1.30</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>user2</name>
<password>user2</password>
<hostname>192.168.1.3</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<name>user3</name>
<password>user3</password>
<hostname>192.168.1.15</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<name>user4</name>
<password>user4</password>
<hostname>192.168.1.4</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>

in der cccam.cfg steht folgendes

N: 192.168.1.5 15000 user3 user3 01 02 03 04 05 06 07 08 09 10 11 12 13 14

und das logfile aufm server sieht dann so aus..

[ 22:30:36 ] [ Box detect ] Windows XP Build 2600
[ 22:30:36 ] [ Config ] Option <crypto-special> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 22:30:36 ] [ Config ] Option <sid> for device 0 (Phoenix Interface) not present, no static sids added to filter
[ 22:30:36 ] [ Config ] COM1 ECM priority: round
[ 22:30:36 ] [ Config ] Option <readers> not present for User: dummy, NO reader control enabled
[ 22:30:36 ] [ Config ] Option <readers> not present for User: user2, NO reader control enabled
[ 22:30:36 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 22:30:36 ] [ ECM Cache ] Initialising dynamic Cache
[ 22:30:36 ] [ Loader ] Reader type 2 on node COM1
[ 22:30:36 ] [ Phoenix ] Opening device COM1
[ 22:30:36 ] [ Phoenix ] Setting baud to 16457
[ 22:30:37 ] [ Loader ] Unknown card
[ 22:30:37 ] [ Loader ] Trying Irdeto (T=14)
[ 22:30:37 ] [ Loader ] Reader type 2 on node COM1
[ 22:30:37 ] [ Phoenix ] Opening device COM1
[ 22:30:37 ] [ Phoenix ] Setting baud to 9600
[ 22:30:38 ] [ Loader ] Init Irdeto card
[ 22:30:38 ] [ Phoenix ] Setting baud to 9600
[ 22:30:38 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 22:30:38 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 22:30:38 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 22:30:38 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 22:30:38 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3
[ 22:30:41 ] [ Loader ] Card 1702 on port COM1 ready
[ 22:30:41 ] [ Loader ] Starting Newcamd Server on port 15000
[ 22:30:46 ] [ Newcamd:15000 ] Unknown user tryed to login: user3
[ 22:30:57 ] [ Newcamd:15000 ] Unknown user tryed to login: user3

ich hoffe du wirst aus all dem schlau..
ich steht echt seit tagen aufm schlauch und bekomm das nicht hin..

 

[Phantom]

AW: NewCS + CCcam Hilfe Bitte.

Schau mal hier https://digital-eliteboard.com/showpost.php?p=155153&postcount=8

Das hat bei mir bestens funktioniert.

 

[darkraver040925]

AW: NewCS + CCcam Hilfe Bitte.

so vielen vielen dank erstmal.. wenigstens is jetzt was hell aber ein kleines problem habe ich... das bild bleibt immer wieder haengen.. und das liegt am reinit der karte..

hier mal ein log..

Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
tcp port: 1001
[ 20:56:34 ] [ Box detect ] Windows XP Build 2600
[ 20:56:34 ] [ Config ] Option <crypto-special> for device 0 (Phoenix Interface) not present, defaul
ting to NO
[ 20:56:34 ] [ Config ] Option <sid> for device 0 (Phoenix Interface) not present, no static sids ad
ded to filter
[ 20:56:34 ] [ Config ] COM1 ECM priority: round
[ 20:56:34 ] [ Config ] Option <readers> not present for User: server, NO reader control enabled
[ 20:56:34 ] [ Config ] Option <readers> not present for User: little, NO reader control enabled
[ 20:56:34 ] [ Config ] Option <readers> not present for User: dream, NO reader control enabled
[ 20:56:34 ] [ Config ] Option <readers> not present for User: reel, NO reader control enabled
[ 20:56:34 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 20:56:34 ] [ ECM Cache ] Initialising dynamic Cache
[ 20:56:34 ] [ Loader ] Reader type 2 on node COM1
[ 20:56:34 ] [ Phoenix ] Opening device COM1
[ 20:56:34 ] [ Phoenix ] Setting baud to 16457
[ 20:56:35 ] [ Loader ] Unknown card
[ 20:56:35 ] [ Loader ] Trying Irdeto (T=14)
[ 20:56:35 ] [ Loader ] Reader type 2 on node COM1
[ 20:56:35 ] [ Phoenix ] Opening device COM1
[ 20:56:35 ] [ Phoenix ] Setting baud to 9600
[ 20:56:36 ] [ Loader ] Init Irdeto card
[ 20:56:36 ] [ Phoenix ] Setting baud to 9600
[ 20:56:36 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 20:56:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 20:56:37 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 20:56:37 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 20:56:37 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3
[ 20:56:40 ] [ Loader ] Card 1702 on port COM1 ready
[ 20:56:40 ] [ Loader ] Starting Newcamd Server on port 15000
[ 20:56:44 ] [ Newcamd:15000 ] User server logged in, client: CCcam
[ 20:56:49 ] [ Newcamd:15000 ] User server logout
[ 20:56:59 ] [ Newcamd:15000 ] User server logged in, client: CCcam
[ 21:11:37 ] [ Loader ] Reinit card with caid 1702
[ 21:11:38 ] [ Phoenix ] Setting baud to 9600
[ 21:11:39 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 21:11:39 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 21:11:39 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 21:11:39 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 21:11:39 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3
[ 21:14:09 ] [ Loader ] Reinit card with caid 1702
[ 21:14:11 ] [ Phoenix ] Setting baud to 9600
[ 21:14:11 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 21:14:11 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 21:14:11 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 21:14:11 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 21:14:11 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3
[ 21:14:13 ] [ Loader ] Reinit card with caid 1702
[ 21:14:14 ] [ Phoenix ] Setting baud to 9600
[ 21:14:15 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 21:14:15 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 21:14:15 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 21:14:15 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 21:14:15 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3
[ 21:15:18 ] [ Loader ] Reinit card with caid 1702
[ 21:15:20 ] [ Phoenix ] Setting baud to 9600
[ 21:15:20 ] [ Keyman ] Adding key 7B005C type 0 on Provider 0 for caid 1702 ID=0
[ 21:15:20 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 0 for caid 1702 ID=0
[ 21:15:20 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 1 for caid 1702 ID=1
[ 21:15:20 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 2 for caid 1702 ID=2
[ 21:15:20 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 3 for caid 1702 ID=3

wie kann ich das denn unterbinden ?