Neue V14 in Betrieb nehmen

[aoxo]

Hallo zusammen,

ich werde wohl heute noch meine neue V14 bekommen (Vorgeschichte hier: https://www.digital-eliteboard.com/378028-v13-nach-1-tag-dunkel-im-raspberry-oscam-new-post.html) und möchte diese dann im raspberry pi mit oscam (r10892) in Betrieb nehmen.

Hier mal meine configs:

oscam.conf

Spoiler

[global]logfile = /var/log/oscam.log
nice = -7
maxlogsize = 1024
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l


[cs357x]
port = 12345


[cccam]
port = 12000
version = 2.3.0
reshare = 1
ignorereshare = 0




[webif]
httpport = 1234
httpuser = admin
httppwd = admin
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

oscam.user

Spoiler

[account]user = vuplus
pwd = duo2
caid = 098c
au = 1
group = 1


[account]
user = clubbi
pwd = dunkelblau
caid = 098c
au = 1
group = 1

oscam.server

Spoiler

[reader]label = v14
description = V14-Sky
enable = 1
protocol = mouse
device = /dev/ttyUSB0
#services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1

Das sollte ja eigentlich soweit passen?! Kann ich die V14 dann direkt in Betrieb nehmen? Sonst noch etwas zu beachten? Wie geht´s dann weiter?

Danke vorab für die Hilfe!

 

[dxob_warrior]

AW: Neue V14 in Betrieb nehmen

Nimm das saveemm-unknown = 1 aus der oscam.server heraus. Die brauchst du nicht.
Und die Log-Size könntest du größer wählen, dann hast du mehr Einträge im Log zur Fehlersuche verfügbar. maxlogsize = 256

Ansonsten loggen und Geduld haben, bis der richtige Aktivierer kommt.

 

[pehedima]

AW: Neue V14 in Betrieb nehmen

In oscam.user bei allen Usern setzen:

caid = 098C

Im Reader den Pararmeter services erst mal löschen.

Karte in den Reader stecken, oscam neu starten und oscam.log vom oscam Start an posten.
Das muss erstmal alles i.O. sein

Edit:
Das Verzeichnis für die oscam.log solltest du noch anpassen, sonst ist die nach jedem reboot verschwunden.

oscam.conf (z.B.)

logfile = /var/log/oscam.log

 

[aoxo]

AW: Neue V14 in Betrieb nehmen

Nimm das saveemm-unknown = 1 aus der oscam.server heraus. Die brauchst du nicht.
Und die Log-Size könntest du größer wählen, dann hast du mehr Einträge im Log zur Fehlersuche verfügbar. maxlogsize = 256

ok, saveemm-unknown = 1 rausgenommen, logsize auf 1024


stimmt, die caid Werte waren noch von meiner V13, habe sie angepasst.

Pfad logfile auch mal angepasst und die configs oben im ersten Post aktualisiert.

 

[pehedima]

AW: Neue V14 in Betrieb nehmen

Okay.
Welcher Client soll das Senden von EMMs übernehmen?
Wenn dort oscam läuft, dann die Configs posten.

 

[aoxo]

AW: Neue V14 in Betrieb nehmen

Client ist eine VU+ Duo2 mit cccam 2.3.0

 

[pehedima]

AW: Neue V14 in Betrieb nehmen

Okay.
Dann warte bis deine Karte da ist.
Die dann in den Reader stecken, oscam neu starten und die oscam.log vom oscam start an hier posten.
Dann sehen wir weiter.

Hinweis:
Nutze doch bitte in Zukunft den 'Anworten' button und nicht 'Zitieren' wenn sich der entsprechende Beitrag der letzte ist. Danke.

 

[aoxo]

AW: Neue V14 in Betrieb nehmen

So, Karte ist grade eingetroffen. Hier das logfile:

Spoiler

2015/07/16 12:30:37 1EB1A483 h (webif) Restart requested by WebIF from 192.168.0.22015/07/16 12:30:37 1EB1A483 h (main) restart oscam requested
2015/07/16 12:30:41 1EB1A483 h (webif) HTTP Server stopped
2015/07/16 12:30:41 00000000 s (emmcache) saved 3 emmcache records to /tmp/.oscam/oscam.emmcache in 1 ms
2015/07/16 12:30:41 00000000 s (emmcache) saved 0 emmstat records to /tmp/.oscam/oscam.emmstat in 0 ms
2015/07/16 12:30:41 00000000 s (client) killing client vuplus
2015/07/16 12:30:41 00000000 s (client) killing client clubbi
2015/07/16 12:30:41 00000000 s (reader) v14 [mouse] Killing reader
2015/07/16 12:30:42 00000000 s (config) userdb 2 accounts freed
2015/07/16 12:30:42 00000000 s (config) readerdb 1 readers freed
2015/07/16 12:30:42 00000000 s (main) cardserver down


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jul 16 12:30:43 2015
-------------------------------------------------------------------------------
2015/07/16 12:30:43 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10892 (arm-linux-gnueabihf)
2015/07/16 12:30:43 00000000 s (main) System name = Linux
2015/07/16 12:30:43 00000000 s (main) Host name = raspberrypi
2015/07/16 12:30:43 00000000 s (main) Release = 3.18.11+
2015/07/16 12:30:43 00000000 s (main) Version = #781 PREEMPT Tue Apr 21 18:02:18 BST 2015
2015/07/16 12:30:43 00000000 s (main) Machine = armv6l
2015/07/16 12:30:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 20885
2015/07/16 12:30:43 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/07/16 12:30:43 00000000 s (main) signal handling initialized
2015/07/16 12:30:43 00000000 s (config) 514 service-id's loaded in 10 ms
2015/07/16 12:30:43 00000000 s (net) cs357x: initialized (fd=5, port=12345)
2015/07/16 12:30:43 00000000 s (net) cccam: initialized (fd=6, port=12000)
2015/07/16 12:30:43 00000000 s (reader) v14 [mouse] creating thread for device /dev/ttyUSB0
2015/07/16 12:30:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/07/16 12:30:43 00000000 s (main) waiting for local card init
2015/07/16 12:30:43 1EB1A483 h (webif) webif: decompressed 155018 bytes back into 373996 bytes
2015/07/16 12:30:43 1EB1A483 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75224
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 1 value 03 time_us 7057
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 2 value 40 time_us 1311
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 3 value 37 time_us 32550
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 4 value 5b time_us 1284
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 5 value bf time_us 1330
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 6 value f5 time_us 2613
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 7 value fe time_us 1393
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 8 value 0f time_us 1189
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 9 value 7d time_us 1306
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 10 value f2 time_us 1276
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 11 value af time_us 1326
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 12 value 69 time_us 2601
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 13 value 00 time_us 1463
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 14 value ad time_us 1153
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 15 value f5 time_us 1301
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 16 value f0 time_us 1290
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 17 value ff time_us 1318
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 18 value ff time_us 2604
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 19 value f5 time_us 1324
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 20 value 73 time_us 1204
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Flush readed byte Nr 21 value 3f time_us 1301
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Buffers readed 21 bytes total time_us 146770
2015/07/16 12:30:43 3E40B6A9 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/07/16 12:30:44 3E40B6A9 r (reader) v14 [mouse] card detected
2015/07/16 12:30:44 3E40B6A9 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75202
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] ATR:
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] Setting baudrate to 38400 bps
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75221
2015/07/16 12:30:45 3E40B6A9 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/16 12:30:49 3E40B6A9 r (reader) v14 [mouse] card system not supported
2015/07/16 12:30:49 3E40B6A9 r (reader) v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2015/07/16 12:30:49 3E40B6A9 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75207
2015/07/16 12:30:51 3E40B6A9 r (reader) v14 [mouse] ATR:
2015/07/16 12:30:51 3E40B6A9 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/07/16 12:30:51 3E40B6A9 r (reader) v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/07/16 12:30:51 3E40B6A9 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75234
2015/07/16 12:30:51 3E40B6A9 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/16 12:30:55 3E40B6A9 r (reader) v14 [mouse] card system not supported
2015/07/16 12:30:55 3E40B6A9 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/07/16 12:30:55 3E40B6A9 r (reader) v14 [mouse] card initializing error
2015/07/16 12:30:55 00000000 s (main) init for all local cards done
2015/07/16 12:30:55 00000000 s (emmcache) loaded 3 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2015/07/16 12:30:55 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/07/16 12:30:55 00000000 s (anticasc) anti cascading disabled
2015/07/16 12:30:55 7CF209F6 c (client) anonymous disconnected from xxx.xx.xx.xx
2015/07/16 12:30:55 6D965755 c (client) anonymous disconnected from 192.168.0.29
2015/07/16 12:31:01 69F69EDD c (client) encrypted cccam-client 192.168.0.29 granted (vuplus, au=auto (1 reader))
2015/07/16 12:31:02 2C01BB99 c (client) encrypted cccam-client xxx.xx.xx.xx granted (clubbi, au=auto (1 reader))

 

[pehedima]

AW: Neue V14 in Betrieb nehmen

Deine Karte wird nicht korrekt gelesen.

Überprüfe die Einstellung der Easy:

oben,unten,unten,egal

Wenn die bereits so eingestellt ist mal mit 6Mhz testen.

Easy umstellen:

oben,unten,oben,oben

Im V14 Reader einstellen:

mhz = 600

Nach der Änderung die gesamte Kiste neu starten, nicht nur oscam und ein neues oscam.log posten.

 

[aoxo]

AW: Neue V14 in Betrieb nehmen

Ok, Kiste neu gestartet, scheint zu laufen mit 600Mhz:

Spoiler

2015/07/16 12:54:28 7E9182AD h (webif) Restart requested by WebIF from 192.168.0.22015/07/16 12:54:28 7E9182AD h (main) restart oscam requested
2015/07/16 12:54:31 75470093 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/07/16 12:54:31 75470093 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/07/16 12:54:31 75470093 r (reader) v14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/07/16 12:54:31 75470093 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/07/16 12:54:31 0FF4FA8E c (ecm) vuplus (098C/0017/98): not found (45 ms) by v14 - Sky Krimi
2015/07/16 12:54:31 7E9182AD h (webif) HTTP Server stopped
2015/07/16 12:54:31 00000000 s (emmcache) saved 0 emmcache records to /tmp/.oscam/oscam.emmcache in 0 ms
2015/07/16 12:54:31 00000000 s (emmcache) saved 0 emmstat records to /tmp/.oscam/oscam.emmstat in 0 ms
2015/07/16 12:54:31 00000000 s (client) killing client clubbi
2015/07/16 12:54:31 00000000 s (client) killing client vuplus
2015/07/16 12:54:31 00000000 s (reader) v14 [videoguard2] Killing reader
2015/07/16 12:54:31 00000000 s (config) userdb 2 accounts freed
2015/07/16 12:54:31 00000000 s (config) readerdb 1 readers freed
2015/07/16 12:54:31 00000000 s (main) cardserver down


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Jul 16 12:54:33 2015
-------------------------------------------------------------------------------
2015/07/16 12:54:33 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10892 (arm-linux-gnueabihf)
2015/07/16 12:54:33 00000000 s (main) System name = Linux
2015/07/16 12:54:33 00000000 s (main) Host name = raspberrypi
2015/07/16 12:54:33 00000000 s (main) Release = 3.18.11+
2015/07/16 12:54:33 00000000 s (main) Version = #781 PREEMPT Tue Apr 21 18:02:18 BST 2015
2015/07/16 12:54:33 00000000 s (main) Machine = armv6l
2015/07/16 12:54:33 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2358
2015/07/16 12:54:33 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/07/16 12:54:33 00000000 s (main) signal handling initialized
2015/07/16 12:54:33 00000000 s (config) 514 service-id's loaded in 10 ms
2015/07/16 12:54:33 00000000 s (net) cs357x: initialized (fd=5, port=12345)
2015/07/16 12:54:33 00000000 s (net) cccam: initialized (fd=6, port=12000)
2015/07/16 12:54:33 00000000 s (reader) v14 [mouse] creating thread for device /dev/ttyUSB0
2015/07/16 12:54:33 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/07/16 12:54:33 00000000 s (main) waiting for local card init
2015/07/16 12:54:33 1520C357 h (webif) webif: decompressed 155018 bytes back into 373996 bytes
2015/07/16 12:54:33 1520C357 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75266
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 1 value 03 time_us 4514
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 2 value 40 time_us 1366
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 3 value 57 time_us 33945
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 4 value 5b time_us 67
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 5 value bf time_us 1163
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 6 value f5 time_us 1265
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 7 value fe time_us 1193
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 8 value 0f time_us 86
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 9 value 7d time_us 870
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 10 value f2 time_us 86
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 11 value af time_us 1143
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 12 value 69 time_us 864
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 13 value 00 time_us 69
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 14 value ad time_us 1124
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 15 value f5 time_us 1364
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 16 value f0 time_us 69
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 17 value ff time_us 1152
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 18 value ff time_us 1258
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 19 value f5 time_us 1233
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 20 value 73 time_us 69
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Flush readed byte Nr 21 value 3f time_us 1146
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Buffers readed 21 bytes total time_us 133343
2015/07/16 12:54:33 7E9182AD r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2015/07/16 12:54:34 7E9182AD r (reader) v14 [mouse] card detected
2015/07/16 12:54:34 7E9182AD r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75371
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] Setting baudrate to 153600 bps
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75319
2015/07/16 12:54:35 7E9182AD r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Card type: P1TV
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Rom version: 20AA
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Credit available on card: 0 euro
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Extended 4C detected
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] FuseByte: 00
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Region Code:
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Country Code: DEU
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] Pincode read: 5150
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] PCB settings: FF FF FF FF
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] ready for requests
2015/07/16 12:54:36 7E9182AD r (reader) v14 [mouse] found card system videoguard2
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] card detected
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] ------------------------------------------------------------------
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/07/16 12:54:36 7E9182AD r (reader) v14 [videoguard2] ------------------------------------------------------from-ins70--
2015/07/16 12:54:37 00000000 s (main) init for all local cards done
2015/07/16 12:54:37 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2015/07/16 12:54:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/07/16 12:54:37 00000000 s (anticasc) anti cascading disabled
2015/07/16 12:54:37 3EF2A4C8 c (client) encrypted cccam-client 192.168.0.29 granted (vuplus, au=auto (1 reader))
2015/07/16 12:54:37 7C22A095 c (client) encrypted cccam-client xxx.xx.xx.xx granted (clubbi, au=auto (1 reader))
2015/07/16 12:54:39 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/07/16 12:54:39 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/07/16 12:54:39 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/07/16 12:54:39 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/07/16 12:54:39 3EF2A4C8 c (ecm) vuplus (098C/0017/98): not found (74 ms) by v14 - Sky Krimi
2015/07/16 12:54:47 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/07/16 12:54:47 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/07/16 12:54:47 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/07/16 12:54:47 7E9182AD r (reader) v14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/07/16 12:54:47 3EF2A4C8 c (ecm) vuplus (098C/0017/98): not found (45 ms) by v14 - Sky Krimi

 

[pehedima]

AW: Neue V14 in Betrieb nehmen

Sieht gut aus.
Lass das mal 1-2 Stunden auf Sky Krimi laufen und beobachte zuwischenzeitlich ob EMMs ankommen.
Wenn du die ersten hast, hier im Format 827034, 827025 usw. posten. Also nur die ersten 6 Stellen.

Die EMMs findest du auf der Raspel im Config Verzeichnis. Denke wird /var/etc sein.

 

[aoxo]

AW: Neue V14 in Betrieb nehmen

Also nach 2 Stunden leider noch nichts angekommen. Ist das normal? cccam habe ich vor einer halben Stunde nochmal neu gestartet.

 

[Rohrby]

Ist die Karte im Kundencenter mit Seriennummer hinterlegt? Warum machst du auf den Clienten (Ich glaube Duo2) nicht Oscam drauf!?

Ja entschieden besser mit Oscam!

 

[aoxo]

Ja, Karte ist hinterlegt, grade geprüft. Ist das wirklich ein Unterschied, welche Cam der Client verwendet? Also Oscam besser als cccam was EMMs angeht?

Ok. Aber mit oscam als client habe ich noch gar keine Erfahrung. Was muss ich beachten? Configs vom Raspi übernehmen oder wie? Muss ich da auch die emm blocken oder ist das beim client nicht wichtig?

 

[Rohrby]

AW: Neue V14 in Betrieb nehmen

Blocken musst du nur dort wo die Karte drin ist!

Schau mal hier: https://www.digital-eliteboard.com/353039-oscam-client-configs-fuer-cs378x-tiny-cute.html