Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

[higginsa1]

Hallo,
kämpfe mich gerade durch die Oscam Geschichte, wie erwartet fruchtet es auf Anhieb nicht.

Auf meiner Dreambox 7020 HD benutze ich Merlin 3 Oe2.0 mit einer Sky Karte V1.3 inkl. HD+ unterer Schacht, mit cccam funktioniert alles, nur Oscam geht noch nicht.

Ich starte unter DreamCC das Oscam "OSCAM 1.20-EMU-NFR build r9139" und komme auch in das Webinterface.

Oscom.logfile:

Spoiler

2015/02/22 08:43:55 7223D0 r SkyV13 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2015/02/22 08:43:55 7206C8 h webif: decompressed 54836 bytes back into 156492 bytes
2015/02/22 08:43:55 7206C8 h HTTP Server running. ip=x.y.z.x port=xyz
2015/02/22 08:43:56 7223D0 r SkyV13 [internal] card detected
2015/02/22 08:43:58 7223D0 r SkyV13 [internal] ATR: xyz2
015/02/22 08:43:58 7223D0 r SkyV13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/02/22 08:43:58 7223D0 r SkyV13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/02/22 08:43:58 7223D0 r SkyV13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/02/22 08:43:59 7223D0 r SkyV13 [internal] card system not supported
2015/02/22 08:43:59 7223D0 r SkyV13 [internal] Normal mode failed, reverting to Deprecated Mode
2015/02/22 08:44:00 7223D0 r SkyV13 [internal] ATR: xyz
2015/02/22 08:44:00 7223D0 r SkyV13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/02/22 08:44:00 7223D0 r SkyV13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2015/02/22 08:44:00 7223D0 r SkyV13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/02/22 08:44:01 7223D0 r SkyV13 [internal] card system not supported
2015/02/22 08:44:01 7223D0 r SkyV13 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/22 08:44:01 7223D0 r SkyV13 [internal] card initializing error
2015/02/22 08:44:02 0 s init for all local cards done
2015/02/22 08:44:02 0 s anti cascading disabled

Hier meine oscam.server

Spoiler

[reader]
label = SkyV13
protocol = internal
device = /dev/sci1
boxid = 12345678
#services = sky,hdplus
#services = sky,!hdplus
caid = 09C4
detect = cd
mhz = 357
cardmhz = 357
ins7e11 = 15
ndsversion = 2
group = 3
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1

Als Group habe ich schon 1 und 3 ausprobiert

Jemand einen Tipp?

 

[4gx35]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

cardmhz 2700 mhz 1 setzen !!!
save emm unique fehlt, am besten reader per oscam webif bearbeiten

neuere oscam könnte auch nicht schaden

 

[higginsa1]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Mit cardmhz 2700 mhz 1 sieht es jetzt wie folgt aus, bei dem Link zu den aktuelleren oscam bekomme ich leider nur eine Werbungsbox???

Spoiler

2015/02/22 09:21:55 0 s >> OSCam << cardserver started, version 1.20-EMU-NFR, build r9139 (mipsel-unknown-linux-gnu)
2015/02/22 09:21:55 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5239
2015/02/22 09:21:55 0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2015/02/22 09:21:55 0 s signal handling initialized
2015/02/22 09:21:55 0 s cccam: initialized (fd=x, port=xyz)
2015/02/22 09:21:55 0 s SkyV13 [internal] creating thread for device /dev/sci1
2015/02/22 09:21:55 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/22 09:21:55 0 s waiting for local card init
2015/02/22 09:21:55 77A00A18 r SkyV13 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/02/22 09:21:55 C27C20 h webif: decompressed 54836 bytes back into 156492 bytes
2015/02/22 09:21:55 C27C20 h HTTP Server running. ip=x.x.x.x port=xyz
2015/02/22 09:21:56 77A00A18 r SkyV13 [internal] card detected
2015/02/22 09:21:57 77A00A18 r SkyV13 [internal] ATR: xyz
2015/02/22 09:21:57 77A00A18 r SkyV13 [internal] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/02/22 09:21:57 77A00A18 r SkyV13 [internal] TEST tempo mhz check = 500 mhz
2015/02/22 09:21:57 77A00A18 r SkyV13 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/02/22 09:21:57 77A00A18 r SkyV13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] Card type: P1TV
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] Rom version: 10A7
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] parental lock Settxyz
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] ready for requests
2015/02/22 09:21:58 77A00A18 r SkyV13 [internal] found card system videoguard2
2015/02/22 09:21:58 77A00A18 r SkyV13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/02/22 09:21:58 77A00A18 r SkyV13 [videoguard2] card detected
2015/02/22 09:21:58 77A00A18 r SkyV13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/02/22 09:21:58 77A00A18 r SkyV13 [videoguard2] tier: 2710, expiry date: 2012/11/04-00:01:00
2015/02/22 09:21:58 77A00A18 r SkyV13 [videoguard2] tier: 2712, expiry date: 2013/01/10-00:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 007b, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 007d, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 008e, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00c0, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00c7, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00c8, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00c9, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00ca, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00d4, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00e5, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00f0, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00f3, expiry date: 2015/04/04-01:01:00
2015/02/22 09:21:59 77A00A18 r SkyV13 [videoguard2] tier: 00fa, expiry date: 2015/04/04-01:01:00
2015/02/22 09:22:02 0 s init for all local cards done
2015/02/22 09:22:02 0 s anti cascading disabled
2015/02/22 09:22:02 C30570 c plain dvbapi-client granted (serverbox, au=off)
2015/02/22 09:22:02 C30570 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/02/22 09:22:05 C30570 c [DVBAPI] Receiver sends PMT command 3 for channel 0074
2015/02/22 09:22:05 C30570 c [DVBAPI] Receiver wants to demux srvid 0074 on adapter 0000 camask 0008 index 0003
2015/02/22 09:22:05 C30570 c [ADD PID 0] CAID: 1833 ECM_PID: 1811 PROVID: 000000
2015/02/22 09:22:05 C30570 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B11 PROVID: 000000
2015/02/22 09:22:05 C30570 c [ADD PID 2] CAID: 09AF ECM_PID: 1F11 PROVID: 000000
2015/02/22 09:22:05 C30570 c [ADD PID 3] CAID: 098C ECM_PID: 1A11 PROVID: 000000
2015/02/22 09:22:05 C30570 c Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/22 09:22:05 C30570 c [DVBAPI] Receiver wants to demux srvid 0074 on adapter 0000 camask 0008 index 0003
2015/02/22 09:22:05 C30570 c New program number: 0074 (1833:0074 unknown) [pmt_list_management 3]
2015/02/22 09:22:05 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:05 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:05 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:05 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:06 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:06 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:06 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:06 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:07 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:07 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:07 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:08 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:08 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:08 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:09 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:09 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:09 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:09 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:10 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:10 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:10 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:11 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:11 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:11 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:12 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:12 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:12 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:12 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:13 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:13 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:13 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:14 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:14 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:14 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:15 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:15 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:15 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:15 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:16 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:16 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:16 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:17 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:17 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:17 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:18 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:18 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:18 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:18 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:19 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:19 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:19 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:20 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:20 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:20 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:21 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:21 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:21 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:21 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:22 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:22 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:22 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:23 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:23 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:23 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:24 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:24 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:24 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:24 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:25 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:25 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:25 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:26 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:26 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:26 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:27 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:27 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:27 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 09:22:27 C30570 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 09:22:28 C30570 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

 

[dodo83]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Karte wird jetzt eingelesen aber keine passender Reader gefunden
hast du im User Account nocht Caids eingetragen und fehlt die 09C4 eventuell, oder in der oscam.dvbapi?

 

[SaMMyMaster]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Link ist nicht mehr aktiv.

 

[higginsa1]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Danke für Eure Hilfe! Bin mit meinem Latain bereits am Ende:-(

Die neue Version habe ich runtergeladen, nach auspacken habe ich ein oscam File, wohin damit?

hast du im User Account nocht Caids eingetragen??

Hier ein Auszug der oscam.user
[account]
user = serverbox
pwd = passwort
group = 1,2
au = v13,hd01

sehe schon, au = muss angepasst werden, denke auf "SkyV13"

und fehlt die 09C4 eventuell??
steht nur in der oscam.Server
caid = 09C4

oder in der oscam.dvbapi?
wo finde ich die?

 

[SaMMyMaster]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

/usr/bin/cam/

 

[modino2711]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

in der oscam.conf das DVBapi protokoll eingetragen ?

du sollest mal alle configs posten, damit man sehen kann wo der fehler hängt.

 

[Darklord999]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Die Caid muss doch auch noch in die DVBapi oder ?

 

[higginsa1]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

wenn ich die oscam umkopiere dann komme ich nicht in das Webinterface

ansonsten die Files, die ich in der Weboberfläche angezeigt bekomme:

Spoiler

Sie müssen registriert sein, um Links zu sehen.

: gibt es nicht

# oscam.conf
[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l
[Cache]
[cccam]
port = 33333
nodeid = 0CE2A769109A14DC
version = 2.3.0
reshare = 1
[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox
[webif]
httpport = 17000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120



[account]
user = serverbox
pwd = passwort
group = 1,2
au = SkyV13


oscam.Server
[reader]
label = SkyV13
protocol = internal
device = /dev/sci1
boxid = 12345678
#services = sky,hdplus
#services = sky,!hdplus
caid = 09C4
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 3
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1

bis auf das logfile habe ich keine anderen Files...

 

[modino2711]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

oscam vor dem überschreiben ausgeschaltet ?

[account]
user = serverbox
group = 1,2
caid = 09C4,1830
au = 1

ändere mal den acount !

 

[higginsa1]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

Damit sieht mein log wie folgt aus

Spoiler

2015/02/22 11:44:17 0 s >> OSCam << cardserver started, version 1.20-EMU-NFR, build r9139 (mipsel-unknown-linux-gnu)
2015/02/22 11:44:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6208
2015/02/22 11:44:17 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/02/22 11:44:17 0 s signal handling initialized
2015/02/22 11:44:17 0 s cccam: initialized (fd=5, port=33333)
2015/02/22 11:44:17 0 s SkyV13 [internal] creating thread for device /dev/sci1
2015/02/22 11:44:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/22 11:44:17 0 s waiting for local card init
2015/02/22 11:44:17 6B5EA8 r SkyV13 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/02/22 11:44:17 6B06C8 h webif: decompressed 54836 bytes back into 156492 bytes
2015/02/22 11:44:17 6B06C8 h HTTP Server running. ip=0.0.0.0 port=17000
2015/02/22 11:44:18 6B5EA8 r SkyV13 [internal] card detected
2015/02/22 11:44:19 6B5EA8 r SkyV13 [internal] ATR: xyz2
015/02/22 11:44:19 6B5EA8 r SkyV13 [internal] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/02/22 11:44:19 6B5EA8 r SkyV13 [internal] TEST tempo mhz check = 500 mhz
2015/02/22 11:44:19 6B5EA8 r SkyV13 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/02/22 11:44:19 6B5EA8 r SkyV13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] Card type: P1TV
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] Rom version: 10A7
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] parental lock setting: yxz
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] ready for requests
2015/02/22 11:44:20 6B5EA8 r SkyV13 [internal] found card system videoguard2
2015/02/22 11:44:20 6B5EA8 r SkyV13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/02/22 11:44:20 6B5EA8 r SkyV13 [videoguard2] card detected
2015/02/22 11:44:20 6B5EA8 r SkyV13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/02/22 11:44:20 6B5EA8 r SkyV13 [videoguard2] tier: 2710, expiry date: 2012/11/04-00:01:00
2015/02/22 11:44:20 6B5EA8 r SkyV13 [videoguard2] tier: 2712, expiry date: 2013/01/10-00:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 007b, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 007d, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 008e, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00c0, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00c7, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00c8, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00c9, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00ca, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00d4, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00e5, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00f0, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00f3, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:21 6B5EA8 r SkyV13 [videoguard2] tier: 00fa, expiry date: 2015/04/04-01:01:00
2015/02/22 11:44:24 0 s init for all local cards done
2015/02/22 11:44:24 0 s anti cascading disabled
2015/02/22 11:44:24 6BB610 c plain dvbapi-client granted (serverbox, au=auto (1 reader))
2015/02/22 11:44:24 6BB610 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/02/22 11:44:27 6BB610 c [DVBAPI] Receiver sends PMT command 3 for channel 0074
2015/02/22 11:44:27 6BB610 c [DVBAPI] Receiver wants to demux srvid 0074 on adapter 0000 camask 0008 index 0003
2015/02/22 11:44:27 6BB610 c [ADD PID 0] CAID: 1833 ECM_PID: 1811 PROVID: 000000
2015/02/22 11:44:27 6BB610 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B11 PROVID: 000000
2015/02/22 11:44:27 6BB610 c [ADD PID 2] CAID: 09AF ECM_PID: 1F11 PROVID: 000000
2015/02/22 11:44:27 6BB610 c [ADD PID 3] CAID: 098C ECM_PID: 1A11 PROVID: 000000
2015/02/22 11:44:27 6BB610 c Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/22 11:44:27 6BB610 c [DVBAPI] Receiver wants to demux srvid 0074 on adapter 0000 camask 0008 index 0003
2015/02/22 11:44:27 6BB610 c New program number: 0074 (1833:0074 unknown) [pmt_list_management 3]
2015/02/22 11:44:27 6BB610 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 11:44:27 6BB610 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 11:44:27 6BB610 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/22 11:44:27 6BB610 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2015/02/22 11:44:28 6BB610 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

 

[modino2711]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

den server hast du auf group 3 gesetzt , aber im user hast du nur group 1,2 gesetzt.

schreib da mal group = 1,2,3 und dann oscam neu starten.

 

[higginsa1]

tada, jetzt ist es hell geworden, besten Dank!

wenn ich jetzt noch eine aktuelle OSCAM Version installieren könnte....

 

[cojo]

AW: Merlin 3 Oe2.0 Sky1.3 mit Oscam auf DB7020HD

nimm einfach den alternativen cam feed

https://www.digital-eliteboard.com/334390-alternatvier-cam-feed-fuer-merlin.html

da ist ne neuere oscam drauf und noch so einiges andere