mal bitte nen smartcard treiber testen

[Ducktrick]

ich hätte da nochmal nen paar änderungen am smartcard treiber gemacht

Dieser Switcht beim card init die bautrate aufs optimale, V14 läuft damit, hab die hoffnung das die karten damit mal etwas besser laufen werden.
Wäre supper wenn ihr den mal testen würdet.

Wie immer entpacken und das modul nach /lib/modules/2.6.32.59_stm24_0211/ kopieren und vorhandene ersetzen, dann reboot

beide laufen mit
ins7e11 = 15

90 -100 ms

Sie müssen registriert sein, um Links zu sehen.

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

Mal noch zur anmerkung, meine beiden V14 laufen aktuell mit dem treiber und dem ins7e11 = 15, kein reload des readers und die zeiten liegen je nach belasstung bei 82 - 100 mehr tendierend zu 82
Keinerlei ausfälle oder enorme steigerungen, hab gestern noch nen kernel gebaut mit nen sound Fix und E2 buffers verbessert sodas (zumindest im mom bei mir ) 2 aufnahmen und was anderes sehen mit dem Vip2 kein problem waren, wohl bemerkt das ich alles auf nas aufnehme und nur einen usb am vip2 hab für E2, selbst das bedienen von E2 ist nur leicht träger bei aufnahmen aktuell und auch selbst dabei lagen die antwortzeiten immernoch bei knapp 90 für alle anfragen

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

Hab den neuen Treiber drauf. VIP1vers1
Bekomme die V14 Karte nicht zum Laufen: nicht im internem reader noch im externen reader.
Hab mir zusätzlich das oscam Speziel als Plugin heruntergeladen.
Gib mir bitte deine Configs für den reader.

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

beim Vip1 hab ich sie im unteren beim vip2 im oberen, in beiden diesen reader

[reader]
label                         = V14-Orig
protocol                      = internal
device                        = /dev/sci1
autospeed                     = 0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
ecmwhitelist                  = 098C:98,9B,97,57,91
detect                        = cd
mhz                           = 500
cardmhz                       = 375
group                         = 2
emmcache                      = 1,1,10
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

was sagt denn oscam ? zur not lösch den treiber nochmal peer ftp und lad es dann nochmal rein, der treiber braucht keine rechte

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

reader angepasst.
Treiber gelöscht und neu per FTP rübergezogen.
Box neu gebootet.
Da stand unknown.
reader neu gestartet
Log :

Spoiler

• 2015/06/25 22:50:34 5D7A78 r (reader) skyde [internal] card detected
• 2015/06/25 22:50:34 5D7A78 r (reader) skyde [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/25 22:50:34 5D7A78 r (reader) skyde [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/25 22:50:34 5D7A78 r (reader) skyde [internal] Calculated work ETU is 104.20 us reader mhz = 357
• 2015/06/25 22:50:34 5D7A78 r (reader) skyde [internal] Buffers readed 0 bytes total time_us 81413
• 2015/06/25 22:50:35 5D7A78 r (reader) skyde [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
• 2015/06/25 22:50:36 5D7A78 r (reader) skyde [internal] card system not supported
• 2015/06/25 22:50:36 5D7A78 r (reader) skyde [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/25 22:50:36 5D7A78 r (reader) skyde [internal] card initializing error

Hab unter modules noch den Treiber drin: smartcard-vip2.ko
Stört der eventuell?

Edit: hab diesen Treiber gelöscht und neu gebootet: Error.

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

kannst du mir mal nen dmesg posten . die letzten 50 zeilen beim oscam start reichen

da sollte nach nen oscam start sowas kommen, wenn nicht ist es der falsche treiber

[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
[SMARTCARD] p_sci_parameters: 3
[SMARTCARD]sci->sci_parameters.ETU: 74
[SMARTCARD] ETU=74,  WWT: 153600
[SMARTCARD] ASC_Baud value in MODE 1: 1610
f is set to 3
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 5 -> Set ClassA[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:23
[SMARTCARD] GoTo Setting ETU: 4
[SMARTCARD] p_sci_parameters: 3
f is set to 3
Setting clock to: 3.57Mhz
[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
[SMARTCARD] p_sci_parameters: 3
[SMARTCARD]sci->sci_parameters.ETU: 74
[SMARTCARD] ETU=74,  WWT: 153600
[SMARTCARD] ASC_Baud value in MODE 1: 1610
f is set to 3
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 3 -> Set ClassB[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
[SMARTCARD] p_sci_parameters: 3
[SMARTCARD]sci->sci_parameters.ETU: 74
[SMARTCARD] ETU=74,  WWT: 38400
[SMARTCARD] ASC_Baud value in MODE 1: 402
vcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 5 -> Set ClassA[SMARTCARD] p_sci_parameters->f:0
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
[SMARTCARD]sci->sci_parameters.ETU: 74
[SMARTCARD] ETU=74,  WWT: 153600
[SMARTCARD] ASC_Baud value in MODE 1: 1610
f is set to 0
Setting clock to: 0.00Mhz
[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:23
[SMARTCARD] GoTo Setting ETU: 4
[SMARTCARD] p_sci_parameters: 3
f is set to 3
Setting clock to: 3.57Mhz

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

dsmeg nach oscam Neustart:

Spoiler

SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 3.2 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: error -6 - no Frontcontroller? @2665
---------------vfd detect failed
unable to init module
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
usb-storage: device scan complete
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:40 @2685
YWPANEL_VFD_DETECT: result=-6, vfd_type=1
VfdType = 1
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2815
CpuType = 252
DisplayInfo = 64
scankeyNum = 221
swMajorVersion = 41
swSubVersion = 132
input: Vip1 - Opticum9500 Frontpanel Buttons as /devices/virtual/input/input0
usb 1-1.5.2: configuration #1 chosen from 1 choice
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip1
[DETECT] -> Tuner = stb6110x
cimax loaded
[AVS]: A/V switch handling for stv6418
[AVS]: chip found @ 0x4b
ksound: Built Aug 24 2014 17:29:27
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pseudocard: 1 pseudo soundcard(s) found
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (STV6110 (VIP) (OPTICUM))...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 0000ffff at 1 IRQ 0 (0:01)
eth0: PHY ID 1c040011 at 2 IRQ 11 (0:02) active
eth0: PHY ID 0000ffff at 3 IRQ 0 (0:03)
eth0: PHY ID 0000ffff at 4 IRQ 0 (0:04)
eth0: PHY ID 0000ffff at 5 IRQ 0 (0:05)
eth0: PHY ID 0000ffff at 6 IRQ 0 (0:06)
eth0: PHY ID 0000ffff at 7 IRQ 0 (0:07)
eth0: PHY ID 0000ffff at 8 IRQ 0 (0:08)
eth0: PHY ID 0000ffff at 9 IRQ 0 (0:09)
eth0: PHY ID 0000ffff at 10 IRQ 0 (0:0a)
eth0: PHY ID 0000ffff at 11 IRQ 0 (0:0b)
eth0: PHY ID 0000ffff at 12 IRQ 0 (0:0c)
eth0: PHY ID 0000ffff at 13 IRQ 0 (0:0d)
eth0: PHY ID 0000ffff at 14 IRQ 0 (0:0e)
eth0: PHY ID 0000ffff at 15 IRQ 0 (0:0f)
eth0: PHY ID 0000ffff at 16 IRQ 0 (0:10)
eth0: PHY ID 0000ffff at 17 IRQ 0 (0:11)
eth0: PHY ID 0000ffff at 18 IRQ 0 (0:12)
eth0: PHY ID 0000ffff at 19 IRQ 0 (0:13)
eth0: PHY ID 0000ffff at 20 IRQ 0 (0:14)
eth0: PHY ID 0000ffff at 21 IRQ 0 (0:15)
eth0: PHY ID 0000ffff at 22 IRQ 0 (0:16)
eth0: PHY ID 0000ffff at 23 IRQ 0 (0:17)
eth0: PHY ID 0000ffff at 24 IRQ 0 (0:18)
eth0: PHY ID 0000ffff at 25 IRQ 0 (0:19)
eth0: PHY ID 0000ffff at 26 IRQ 0 (0:1a)
eth0: PHY ID 0000ffff at 27 IRQ 0 (0:1b)
eth0: PHY ID 0000ffff at 28 IRQ 0 (0:1c)
eth0: PHY ID 0000ffff at 29 IRQ 0 (0:1d)
eth0: PHY ID 0000ffff at 30 IRQ 0 (0:1e)
eth0: PHY ID 0000ffff at 31 IRQ 0 (0:1f)
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
Boxtype: Vip1Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
LED level = 1
stmhdmiio_set_audio_source - 8b180000
[AVS]: avs_command_kernel (4104)
LED level = 1
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b9d29e8
(da 0, 5)(da 0, 6)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
(da 0, 7)(da 0, 7)ATR wasn't read
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
stmfb: Starting HDMI Output hdmi = 8b180000
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
ArgusVIP:~#

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

nö das ist immernoch der alte treiber .... deswegen geht auch nix ...

wie du das immer wieder schaffst weiss ich nicht aber mach folgendes

Stope oscam entlade und lade den neuen treiber starte oscam , in telnet wie folgt

/var/config/emu/stop-emu.sh
modprobe -r smartcard.ko

danach lösche den Treiber

rm /lib/modules/2.6.32.59_stm24_0211/smartcard.ko

schieb das neue smartcard.ko in den ordner /lib/modules/2.6.32.59_stm24_0211/ , dann

sync
modprobe smartcard.ko boxtype=vip1
/var/config/emu/start-oscam.sh
dmesg

poste das dmesg nochmal dann bitte

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

dmesg

Spoiler

LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
Unregistering device 'sc', major '169'Smartcard Driver v.[1.0.1] removed.
LED level = 1
LED level = 1
LED level = 1
warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Registering device 'sc', major '169'
kobject_add_internal failed for sc with -EEXIST, don't try to register things wi
th the same name in the same directory.
Stack: (0x8af61e94 to 0x8af62000)
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
1e80: 84120bc4 8ae8d920 ffffffef
1ea0: 84120ece 0049e778 00000000 8b80c4a0 8b80c4a0 00000000 8ae8d920 8af61ed0
1ec0: 84143e50 8ae0c4dc 8ae8d920 00000000 c25ce3a8 8414488e ffffffea 00000000
1ee0: 00000000 8ae0c460 c25ce41c 8af61f50 84125138 8af4e8c0 84120dcc 00000000
1f00: 84120df4 84144cde 00000000 0049e778 00000000 0a900000 8ae0c460 00000000
1f20: 00000000 84144d40 c25ce41c c25d0214 84144d2c 00000000 8429dd40 c25ce41c
1f40: 8af61f50 8af61f50 c25d30fe c25ce41c 00000000 84002088 00000000 00009bfe
1f60: 000000fc 00000000 c25d3000 84034d4c 84034d98 0049e778 0000059c 00009bfe
1f80: 000000fc 00000000 c25cee4c 00000071 84007920 00000000 00000071 00000100
1fa0: 84034d10 0041266a 0049e710 0049e5a8 00000080 0049f660 00009bfe 0049e5a8
1fc0: 00009bfe 296c3480 0049f660 0049e5a8 00000001 0049e710 0049e778 00000000
1fe0: 7bc46b90 29657a12 00412c14 00000000 296c3470 4a8568ad fffff000 0000005c

Call trace:
[<84120ece>] 0x84120ece
[<84143e50>] 0x84143e50
[<8414488e>] 0x8414488e
[<84125138>] 0x84125138
[<84120dcc>] 0x84120dcc
[<84120df4>] 0x84120df4
[<84144cde>] 0x84144cde
[<84144d40>] 0x84144d40
[<84144d2c>] 0x84144d2c
[<8429dd40>] 0x8429dd40
[<c25d30fe>] 0xc25d30fe
[<84002088>] 0x84002088
[<c25d3000>] 0xc25d3000
[<84034d4c>] 0x84034d4c
[<84034d98>] 0x84034d98
[<84007920>] 0x84007920
[<84034d10>] 0x84034d10

kobject_add_internal failed for sc with -EEXIST, don't try to register things wi
th the same name in the same directory.
Stack: (0x8af61e94 to 0x8af62000)
1e80: 84120bc4 8ae8d920 ffffffef
1ea0: 84120ece 0049e778 00000000 8b80c4a0 8b80c4a0 00000000 8ae8d920 8af61ed0
1ec0: 84143e50 8ae0c41c 8ae8d920 00000000 c25ce3a8 8414488e ffffffea 00000000
1ee0: 00000000 8ae0c3a0 c25ce41c 8af61f50 84125138 8af4e660 84120dcc 00000000
1f00: 84120df4 84144cde 00000000 0049e778 00000000 0a900001 8ae0c3a0 00000000
1f20: 00000000 84144d40 c25ce41c c25d0214 84144d2c 00000000 8429dd40 c25ce41c
1f40: 8af61f50 8af61f50 c25d310e c25ce41c 00000001 84002088 00000000 00009bfe
1f60: 000000fc 00000000 c25d3000 84034d4c 84034d98 0049e778 0000059c 00009bfe
1f80: 000000fc 00000000 c25cee4c 00000071 84007920 00000000 00000071 00000100
1fa0: 84034d10 0041266a 0049e710 0049e5a8 00000080 0049f660 00009bfe 0049e5a8
1fc0: 00009bfe 296c3480 0049f660 0049e5a8 00000001 0049e710 0049e778 00000000
1fe0: 7bc46b90 29657a12 00412c14 00000000 296c3470 4a8568ad fffff000 0000005c

Call trace:
[<84120ece>] 0x84120ece
[<84143e50>] 0x84143e50
[<8414488e>] 0x8414488e
[<84125138>] 0x84125138
[<84120dcc>] 0x84120dcc
[<84120df4>] 0x84120df4
[<84144cde>] 0x84144cde
[<84144d40>] 0x84144d40
[<84144d2c>] 0x84144d2c
[<8429dd40>] 0x8429dd40
[<c25d310e>] 0xc25d310e
[<84002088>] 0x84002088
[<c25d3000>] 0xc25d3000
[<84034d4c>] 0x84034d4c
[<84034d98>] 0x84034d98
[<84007920>] 0x84007920
[<84034d10>] 0x84034d10

Version of smartcard driver: [1.0.1]
[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
ATR wasn't read
f is set to 3
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 3 -> Set ClassB[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:93
[SMARTCARD] GoTo Setting ETU: 18
[SMARTCARD] p_sci_parameters: 3
[SMARTCARD]sci->sci_parameters.ETU: 18
[SMARTCARD] ETU=18, WWT: 38400
[SMARTCARD] ASC_Baud value in MODE 1: 402
vcc = 3 -> Set ClassBf is set to 3
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 5 -> Set ClassA[SMARTCARD] p_sci_parameters->f:0
[SMARTCARD] p_sci_parameters->ETU:372
[SMARTCARD] GoTo Setting ETU: 74
[SMARTCARD]sci->sci_parameters.ETU: 74
[SMARTCARD] ETU=74, WWT: 153600
[SMARTCARD] ASC_Baud value in MODE 1: 1610
f is set to 0
Setting clock to: 0.00Mhz
[SMARTCARD] p_sci_parameters->f:3
[SMARTCARD] p_sci_parameters->ETU:23
[SMARTCARD] GoTo Setting ETU: 4
[SMARTCARD] p_sci_parameters: 3
f is set to 3
Setting clock to: 3.57Mhz
LED level = 1
ArgusVIP:~#

Jetzt boote ich noch mal.

Perfekt. Das wars: [TABLE="class: status"]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol4"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol5 statuscol5ON"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:00:23
00:00:23[/TD]
[TD="class: statuscol16 statuscol16CARDOK"]CARDOK[/TD]
[/TR]
[/TABLE]
[TABLE="class: status"]
[TR="class: c"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol4"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol5 statuscol5ON"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol7"]0.0.0.0[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]dvbapi[/TD]
[TD="class: statuscol12"]098C:007E[/TD]
[TD="class: statuscol13"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:04:33
00:00:03[/TD]
[TD="class: statuscol16 statuscol16OK"]OK[/TD]
[/TR]
[/TABLE]


Meine Vermutung. Meine Schuld: Treiber im falschen Pfad abgelegt

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

Teste auch eine externen reader: eaysmouse2.
Da kommt diese Meldung:

• 2015/06/26 12:30:01 5BD220 r (reader) v14sat [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2015/06/26 12:30:01 5BD220 r (reader) v14sat [mouse] Cannot open device: /dev/ttyUSB0
• Muß da bei device etwas anderes stehen?

Das finde ich bei scan usb

Spoiler

USB Devices
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 0835:8500
Bus 001 Device 003: ID 0835:8501
Bus 001 Device 004: ID 0781:5567
Bus 001 Device 005: ID 0835:8500
Bus 001 Device 006: ID 0835:8502
Bus 001 Device 007: ID 0403:6001

das mit dmesg

Spoiler

:80:E1:12:06:30 init=/bin/devinit printk
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=04061100 CVR=30480000 PRR=00009300
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 109140k/131072k available (2701k kernel code, 807k data, 1616k init)
Hierarchical RCU implementation.
NR_IRQS:600
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 264.19 BogoMIPS (lpj=528384)
Mount-cache hash table entries: 512
CPU: STx7109
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 3.2 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: error -6 - no Frontcontroller? @2665
---------------vfd detect failed
unable to init module
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
usb-storage: device scan complete
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:40 @2685
YWPANEL_VFD_DETECT: result=-6, vfd_type=1
VfdType = 1
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2815
CpuType = 252
DisplayInfo = 64
scankeyNum = 221
swMajorVersion = 41
swSubVersion = 132
input: Vip1 - Opticum9500 Frontpanel Buttons as /devices/virtual/input/input0
usb 1-1.5.2: configuration #1 chosen from 1 choice
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
stmfb: Starting HDMI Output hdmi = 8acf0000
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip1
[DETECT] -> Tuner = stb6110x
cimax loaded
[AVS]: A/V switch handling for stv6418
[AVS]: chip found @ 0x4b
ksound: Built Aug 24 2014 17:29:27
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pseudocard: 1 pseudo soundcard(s) found
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (STV6110 (VIP) (OPTICUM))...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 1c040011 at 2 IRQ 11 (0:02) active
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
Boxtype: Vip1vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
LED level = 1
stmhdmiio_set_audio_source - 8acf0000
stmfb: Starting HDMI Output hdmi = 8acf0000
stmfb: Starting HDMI Output hdmi = 8acf0000
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8ad929e8
(da 0, 5)(da 0, 6)(da 0, 7)(da 0, 7)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
ArgusVIP:~#

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

ja da sind die usb treiber noch nicht geladen , im teamcs menü kannste das machen das der die läd, pl2303 und ftdi oder wie die heissen , weiss gerade nicht genau wo

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

perfekt
dvice Fehler ist weg:

Spoiler

bpa2: partition 'LMI_VID' created at 0x10800000, size 73728 kB (0x04800000 B)
bpa2: partition 'LMI_SYS' created at 0x0462b000, size 15360 kB (0x00f00000 B)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttyAS0,115200 root=/dev/sda1 rw mem=256m bigpysarea
=4000 coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00
:80:E1:12:06:30 init=/bin/devinit printk
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=04061100 CVR=30480000 PRR=00009300
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 109140k/131072k available (2701k kernel code, 807k data, 1616k init)
Hierarchical RCU implementation.
NR_IRQS:600
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 264.19 BogoMIPS (lpj=528384)
Mount-cache hash table entries: 512
CPU: STx7109
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 3.2 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: error -6 - no Frontcontroller? @2665
---------------vfd detect failed
unable to init module
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
usb-storage: device scan complete
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:40 @2685
YWPANEL_VFD_DETECT: result=-6, vfd_type=1
VfdType = 1
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2815
CpuType = 252
DisplayInfo = 64
scankeyNum = 221
swMajorVersion = 41
swSubVersion = 132
input: Vip1 - Opticum9500 Frontpanel Buttons as /devices/virtual/input/input0
usb 1-1.5.2: configuration #1 chosen from 1 choice
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
umount: sending ioctl 4c01 to a partition!
umount: sending ioctl 4c01 to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (240).
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (240).
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
stmfb: Starting HDMI Output hdmi = 8b8b0000
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip1
[DETECT] -> Tuner = stb6110x
cimax loaded
[AVS]: A/V switch handling for stv6418
[AVS]: chip found @ 0x4b
ksound: Built Aug 24 2014 17:29:27
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pseudocard: 1 pseudo soundcard(s) found
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (STV6110 (VIP) (OPTICUM))...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 1c040011 at 2 IRQ 11 (0:02) active
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
usbcore: registered new interface driver usbserial
Boxtype: Vip1vcc = 5 -> Set ClassA
usbcore: registered new interface driver usbserial_generic
Setting clock to: 3.57Mhz
vcc = 5 -> Set ClassASetting clock to: 3.57Mhz
Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
usbcore: registered new interface driver ftdi_sio
usbcore: registered new interface driver pl2303
LED level = 1
LED level = 1
[AVS]: avs_command_kernel (5)
[AVS]: avs_command_kernel (11)
[AVS]: avs_command_kernel (4103)
LED level = 1
stmhdmiio_set_audio_source - 8b8b0000
stmfb: Starting HDMI Output hdmi = 8b8b0000
stmfb: Starting HDMI Output hdmi = 8b8b0000
LED level = 1
[AVS]: avs_command_kernel (4104)
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b0bb9e8
(da 0, 1)(da 0, 2)(da 0, 3)(da 0, 3)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
[AVS]: avs_command_kernel (10)
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
LED level = 1
ArgusVIP:~#

Karte zeigt aber noch Error an.
Moust ist mit 6 MHz getaktet.
Nur so läuft sie im Igel

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

mit 6 mhz ??? ne V14 ????

 

[Pilot]

AW: mal bitte nen smartcard treiber testen

Jo
läuft super mit 6mhz.
Die karte mit der ich hier gestet hab, ist von enem Freund
Die hatte ich hier zum Verlägern.
reader an meinem Igel mit easymose2
Es gibt ja easymäuse, die laufen nur mit 6 mhz, wel der Quarz wahrscheinlich Probleme mit 3.57 mhz hat.

Spoiler

[reader]
label = v14sat-2
enable = 0
protocol = mouse
device = /dev/v14sat-2
lb_whitelist_services = sat-sky-select
autospeed = 0
fallback = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 3
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 800
ndsversion = 2

So läuft meine eigene V14 Karte am Igel mit einem Apolloreader

Spoiler

[reader]
label = v14sat
protocol = mouse
device = /dev/v14sat
lb_whitelist_services = sat-sky-select
fallback = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 3
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 800
ndsversion = 2

 

[Ducktrick]

AW: mal bitte nen smartcard treiber testen

muss ich mal bei meinen rumliegenden reader testen