G
Gelöschtes Mitglied 28752
Guest
KPCS Einstellungen für eine Digitalb und Tring Conax Karte
hier muss man jedoch nur den Port änderen..stat 12345 den den ihr haben wollt..
SW2 = 3 Volt
SW1 = Phönix
SW4 = Sd by SW3
SW3 = Y4 (10MHz)
Code:
[reader]
Enable = 1
AU = 1
Label = Dalb
Protocol = mouse
Device = /dev/digitlab
EMMCache = 1,3,2
BaudRate = 26881
Detect = CD
Group = 1
Fallback = 0
flowcontrol = none
[reader]
Enable = 1
AU = 1
Label = tring
Protocol = mouse
Device = /dev/tringtv
EMMCache = 1,3,2
BaudRate = 26881
Detect = CD
Group = 1
Fallback = 0
flowcontrol = none
Code:
[global]
Nice = -1
ClientTimeout = 6
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 1
BindWait = 10
ResolveDelay = 10
DyndnsInterval = 120
#LogFile = stdout
LogFile = /tmp/kpcs1.log
PidFile = /tmp/my.pid
MaxLogSize = 10240
showecmdw = 0
showemmdw = 0
Filter = 1500
ReaderAlarm = 1
serialreadertimeout=4
WaitCards=0
[newcamd]
Key = 0102030405060708091011121314
Port = [EMAIL="12345@0BAA:0;12345@0b00:0"]12345@0BAA:0;12345@0b00:0[/EMAIL]SW2 = 3 Volt
SW1 = Phönix
SW4 = Sd by SW3
SW3 = Y4 (10MHz)