Installation von OpenWRT-18.06.x auf Pogoplug E02

/usr/sbin/flash_erase /dev/mtd0 0xc0000 1
/usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img

...
[   12.138070] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   14.108055] br-lan: port 1(eth0) entered forwarding state
[   61.137998] random: nonblocking pool is initialized
Watchdog handover: fd=3
- watchdog -
killall: telnetd: no process killed
killall: dropbear: no process killed
killall: ash: no process killed
Sending TERM to remaining processes ... ubusd askfirst logd rpcd netifd odhcpd dnsmasq ntpd
Sending KILL to remaining processes ...
cannot find ubi mtd partition rootfs
libubi: error!: "/dev/" is not a character device
ubiupdatevol: error!: error while probing "/dev/"
              error 22 (Invalid argument)
tar: write error: Broken pipe
libubi: error!: "/dev/" is not a character device
ubiupdatevol: error!: error while probing "/dev/"
              error 22 (Invalid argument)
tar: write error: Broken pipe
sysupgrade successful
umount: c[  328.675711] reboot: Restarting system
ÿ

U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700)
Pogo E02

SoC:   Kirkwood 88F6281_A0
DRAM:  256 MiB
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Hit any key to stop autoboot:  0
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices...

 /tmp/sda1/install.sh


--------------------------------------------------------------------------------                                                                              -----------------------------


root@rescue:~#  /tmp/sda1/install.sh


   ? Welche Aktion moechtest du umsetzen ?


 1 - uboot updaten    2 - openwrt installieren

 3 - debian 7 installieren   4 - openwrt reseten


 Eingabe  : 2


  Verifiziere die uboot environment Variablen.

  Die environment Variablen werden Ãberschrieben.Warning: Bad CRC, using default environment


  Flashlayout stimmt nicht!! Sind wir im Rescuesystem??



  Hast du vergessen neuzustarten ??

root@rescue:~#

login as: root


BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.4, r3560-79f57e422d)
    \________\/    -----------------------------------------------------------

=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@LEDE:~# fw_printenv
Warning: Bad CRC, using default environment
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm
bootdelay=5
baudrate=115200
root@LEDE:~#

root@LEDE:~# ldd /usr/bin/oscam-bin
        /lib/ld-uClibc.so.0 (0xb6f2c000)
        libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0xb6ed6000)
        libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0xb6d97000)
        libusb-1.0.so.0 => /usr/lib/libusb-1.0.so.0 (0xb6d79000)
        librt.so.0 => /lib/ld-uClibc.so.0 (0xb6f2c000)
        libpthread.so.0 => /lib/ld-uClibc.so.0 (0xb6f2c000)
        libdl.so.0 => /lib/ld-uClibc.so.0 (0xb6f2c000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6d5d000)
        libc.so.0 => /lib/ld-uClibc.so.0 (0xb6f2c000)
        libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0xb6c1e000)
Error relocating /usr/bin/oscam-bin: __fputc_unlocked: symbol not found
Error relocating /usr/bin/oscam-bin: __fgetc_unlocked: symbol not found
Error relocating /usr/bin/oscam-bin: __uClibc_main: symbol not found
Error relocating /usr/bin/oscam-bin: __ctype_tolower: symbol not found
Error relocating /usr/bin/oscam-bin: __ctype_b: symbol not found
Error relocating /usr/bin/oscam-bin: __ctype_toupper: symbol not found
root@LEDE:~#

root@LEDE:~# ldd /usr/bin/oscam-bin
        /lib/ld-musl-arm.so.1 (0xb6ea1000)
        libssl.so.1.0.0 => /usr/lib/libssl.so.1.0.0 (0xb6e4b000)
        libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0xb6d0c000)
        libusb-1.0.so.0 => /usr/lib/libusb-1.0.so.0 (0xb6cee000)
        libpcsclite.so.1 => /usr/lib/libpcsclite.so.1 (0xb6cd5000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6cb9000)
        libc.so => /lib/ld-musl-arm.so.1 (0xb6ea1000)
root@LEDE:~#

./configure --host=arm-openwrt-linux-muslgnueabi --prefix=/ --disable-shared --enable-libusb --disable-libudev --enable-debugatr LIBUSB_CFLAGS=-I$TOOLCHAIN/include/libusb-1.0 LDFLAGS=-L$TOOLCHAIN/lib LIBUSB_LIBS=-lusb-1.0

....
  CC       pcscd-hotplug_generic.o
  CC       pcscd-ifdwrapper.o
  CC       pcscd-pcscdaemon.o
pcscdaemon.c:57:31: fatal error: systemd/sd-daemon.h: No such file or directory
compilation terminated.
Makefile:988: die Regel für Ziel „pcscd-pcscdaemon.o“ scheiterte
make[3]: *** [pcscd-pcscdaemon.o] Fehler 1
make[3]: Verzeichnis „/tmp/pcsc-lite-1.8.23/src“ wird verlassen
Makefile:1279: die Regel für Ziel „all-recursive“ scheiterte
make[2]: *** [all-recursive] Fehler 1
make[2]: Verzeichnis „/tmp/pcsc-lite-1.8.23/src“ wird verlassen
Makefile:448: die Regel für Ziel „all-recursive“ scheiterte
make[1]: *** [all-recursive] Fehler 1
make[1]: Verzeichnis „/tmp/pcsc-lite-1.8.23“ wird verlassen
Makefile:378: die Regel für Ziel „all“ scheiterte
make: *** [all] Fehler 2