Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

[Herr_des_Zorns]

Hallo,

ich möchte meine HD02 Karte über meine Fritzbox sharen.

Meine Hardware:

FritzBox 7170 (Branding entfernt)
4-fach USB-Hub (aktiv)
4GB USB2.0 Stick
Smargo+ v1.5
4GB USB2.0 Stick
HD02 Karte

Kurze Schilderung was ich bis jetzt erfolgreich gemacht habe:

Fritzbox entbranded und 2.Reihe_7170_04.freetz-devel-9722M.de geupdatet
danach externalfile + uSTOR-FILES[TBflex-2.4(003.cs)].tar installiert.


Smargo 1.5 Einstellungen

Fixed
3,69
Normal
T=0
0


OSCam-Starttyp Automatisch

• Protokoll, mit welchem OSCam die Karte lesen soll: Smargo

Oscam conf

Spoiler

[global]
logfile = /var/media/ftp/System/logs/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5

[monitor]
port = 988
nocrypt = 192.168.178.0-192.168.178.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 0

[webif]
httpport = 83
httpcss = /var/media/ftp/System/service/oscam/style.css
httprefresh = 10
httpallowed = 192.168.178.0-192.168.178.255
httphideidleclients = 1
httpreadonly = 0

OSCam: oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7936
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdp2
description = hdp
protocol = smartreader
device = Serial:Reader F40B5A9
Smargopatch = 1
caid = 1843
rsakey = Bxx5
boxkey = AxxC
detect = cd
mhz = 368
cardmhz = 368
group = 1
deprecated = 1

OSCAM 1.20-unstable_svn build #7936

Spoiler

2013/04/04 23:02:45 59B6E0 r Found smartreader device Serial:Reader F40B5A9
2013/04/04 23:02:45 59B6E0 r hdp2 [smartreader] Reader initialized (device=Serial:Reader F40B5A9, detect=cd, mhz=368, cardmhz=368)
2013/04/04 23:02:46 59B6E0 r hdp2 [smartreader] card detected
2013/04/04 23:02:49 59B6E0 r hdp2 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/04 23:02:49 59B6E0 r hdp2 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/04 23:02:49 59B6E0 r hdp2 [smartreader] Calculated work ETU is 101.09 us
2013/04/04 23:02:49 59B6E0 r hdp2 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/04/04 23:02:50 59B6E0 r hdp2 [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/04 23:02:51 59B6E0 r hdp2 [smartreader] detect native nagra card
2013/04/04 23:02:53 59B6E0 r hdp2 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/04/04 23:02:54 59B6E0 r hdp2 [smartreader] T1 Resync command error, trying to reactivate!
2013/04/04 23:02:57 59B6E0 r hdp2 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/04 23:02:57 59B6E0 r hdp2 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/04 23:02:57 59B6E0 r hdp2 [smartreader] Calculated work ETU is 100.81 us
2013/04/04 23:02:57 59B6E0 r hdp2 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/04/04 23:02:58 59B6E0 r hdp2 [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/04 23:02:59 59B6E0 r hdp2 [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/04/04 23:03:00 59B6E0 r hdp2 [smartreader] T1 Resync command error, trying to reactivate!
2013/04/04 23:03:04 59B6E0 r hdp2 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/04 23:03:04 59B6E0 r hdp2 [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/04 23:03:04 59B6E0 r hdp2 [smartreader] Calculated work ETU is 100.81 us
2013/04/04 23:03:04 59B6E0 r hdp2 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/04/04 23:03:05 59B6E0 r hdp2 [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/04 23:03:05 59B6E0 r hdp2 [smartreader] card system not supported
2013/04/04 23:03:05 59B6E0 r hdp2 [smartreader] card initializing error
2013/04/04 23:03:06 0 s init for all local cards done
2013/04/04 23:03:06 0 s anti cascading disabled

Ich bin über jede Hilfe dankbar!!

Viele Grüße

 

[Sprint2000]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Ähnliche Fehlermeldung hatte ich bei meiner HD02 am Smargo auch. Hab Frequenz auf Auto gestellt. mhz und cardmhz auf 600. Seitdem läuft die HD02.


Gesendet von meinem LG-P990 mit Tapatalk 2

 

[Herr_des_Zorns]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Hallo,

ich habe den Smargo nun auf auto gestellt, und in der config datei auf 600 / 600

Spoiler

2013/04/05 19:33:49 0 s starting thread log_list_thread
2013/04/05 19:33:49 0 s log_list_thread thread started
2013/04/05 19:33:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2013/04/05 19:33:49 0 s version=1.20-unstable_svn, build #7936, system=mipsel-linux-uclibc-ssl-libusb-pcsc, nice=-1
2013/04/05 19:33:49 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2013/04/05 19:33:49 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2013/04/05 19:33:49 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2013/04/05 19:33:49 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2013/04/05 19:33:49 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/04/05 19:33:49 0 s signal handling initialized (type=sysv)
2013/04/05 19:33:49 0 s 116 service-id's loaded in 8ms
2013/04/05 19:33:49 0 s 116 tier-id's loaded
2013/04/05 19:33:49 0 s 3 provid's loaded
2013/04/05 19:33:49 0 s 22 lengths for caid guessing loaded
2013/04/05 19:33:49 0 s ERROR: Cannot open file "/var/media/ftp/System/service/oscam//oscam.whitelist" (errno=2 No such file or directory)
2013/04/05 19:33:49 0 s ERROR: Cannot open file "/var/media/ftp/System/service/oscam//oscam.cacheex" (errno=2 No such file or directory)
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s monitor: initialized (fd=7, port=988)
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s camd33: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s camd35: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s cs378x: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s newcamd: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s pandora: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s csp: disabled
2013/04/05 19:33:49 0 s Starting listener 0
2013/04/05 19:33:49 0 s radegast: disabled
2013/04/05 19:33:49 0 s starting thread http
2013/04/05 19:33:49 0 s http thread started
2013/04/05 19:33:49 0 s starting thread reader check
2013/04/05 19:33:49 0 s reader check thread started
2013/04/05 19:33:49 0 s starting thread check
2013/04/05 19:33:49 0 s check thread started
2013/04/05 19:33:49 0 s hdp2 [smartreader] creating thread for device Serial:Reader F40B5A9
2013/04/05 19:33:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/05 19:33:49 0 s waiting for local card init
2013/04/05 19:33:49 59BD60 h HTTP Server listening on port 83
2013/04/05 19:33:49 599F98 r hdp2 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2013/04/05 19:33:49 599F98 r Found reader with serial Reader F40B5A9 at 001:009
2013/04/05 19:33:49 599F98 r Found smartreader device Serial:Reader F40B5A9
2013/04/05 19:33:49 599F98 r hdp2 [smartreader] Reader initialized (device=Serial:Reader F40B5A9, detect=cd, mhz=600, cardmhz=600)
2013/04/05 19:33:51 0 s init for all local cards done
2013/04/05 19:33:51 0 s anti cascading disabled

Sieht das jetzt besser aus ?
Weil bei der Oscam oberfläsche steht bei Status

OFF

Sie müssen registriert sein, um Links zu sehen.

EDIT:
Ei ei ei ich kapiers nicht ich komme einfach nicht weiter. Liegt es vllt an meine USB HUB ? Gibt es ein Freetz Images für die 7170 mit OScam und Toolbox drin?

Danke

 

[Sprint2000]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Die HD02 ist schon aktiviert?

Gesendet von meinem LG-P990 mit Tapatalk 2

 

[SevenEagle]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Ich kämpfte bestimmt 2 Wochen mit dieser Konstellation. Bis ich meinen HUB damals gegen ein Belkin getauscht habe. Davor wäre ich fast verrückt geworden

 

[Herr_des_Zorns]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Hallo,
ja die Karte läuft in 3 Tagen ab, aber das sollte ja kein Problem sein.

Der Hub ist ein "alter" Belkin.

 

[Sprint2000]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Hast schon mal versucht, eine aktuellere oscam Version zu benutzen?


Gesendet von meinem LG-P990 mit Tapatalk 2

 

[Herr_des_Zorns]

AW: Installation FB 7170 Freetz OSCAM SMARGO 1.5 HD02

Hallo Sprint,

habe ein Update der Oscam gemacht

>> OSCam << cardserver started, version 1.20-unstable_by_EasyBuild_svn, build r8575 (mipsel-linux-uclibc-libusb)

+ aktuellste USB SUpport Datei

Spoiler

2013/04/06 08:57:56 0 s >> OSCam << cardserver started, version 1.20-unstable_by_EasyBuild_svn, build r8575 (mipsel-linux-uclibc-libusb)
2013/04/06 08:57:56 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2775
2013/04/06 08:57:56 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2013/04/06 08:57:56 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/04/06 08:57:56 0 s signal handling initialized
2013/04/06 08:57:56 0 s 116 service-id's loaded in 6ms
2013/04/06 08:57:56 0 s 116 tier-id's loaded
2013/04/06 08:57:56 0 s 3 provid's loaded
2013/04/06 08:57:56 0 s 22 lengths for caid guessing loaded
2013/04/06 08:57:56 0 s monitor: initialized (fd=7, port=988)
2013/04/06 08:57:56 0 s hdplus [smartreader] creating thread for device Serial:Reader F40B5A9
2013/04/06 08:57:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/06 08:57:56 0 s waiting for local card init
2013/04/06 08:57:56 5690F0 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/04/06 08:57:56 56A890 h webif: decompressed 104105 bytes back into 202220 bytes
2013/04/06 08:57:56 56A890 h HTTP Server listening on port 83
2013/04/06 08:57:56 5690F0 r Found reader with serial Reader F40B5A9 at 001:004
2013/04/06 08:57:56 5690F0 r Found smartreader device Serial:Reader F40B5A9
2013/04/06 08:57:56 5690F0 r hdplus [smartreader] Reader initialized (device=Serial:Reader F40B5A9, detect=cd, mhz=600, cardmhz=600)
2013/04/06 08:57:57 5690F0 r hdplus [smartreader] card detected
2013/04/06 08:58:07 5690F0 r hdplus [smartreader] usb bulk write failed : ret = -7





oder





2013/04/06 09:08:35 0 s 116 tier-id's loaded
2013/04/06 09:08:35 0 s 3 provid's loaded
2013/04/06 09:08:35 0 s 22 lengths for caid guessing loaded
2013/04/06 09:08:35 0 s monitor: initialized (fd=6, port=988)
2013/04/06 09:08:35 5690F0 h webif: decompressed 104105 bytes back into 202220 bytes
2013/04/06 09:08:35 5690F0 h HTTP Server listening on port 83
2013/04/06 09:08:35 0 s hdplus [smartreader] creating thread for device Serial:Reader F40B5A9
2013/04/06 09:08:35 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/06 09:08:35 0 s waiting for local card init
2013/04/06 09:08:35 5A7260 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/04/06 09:08:35 5A7260 r Found reader with serial Reader F40B5A9 at 001:004
2013/04/06 09:08:35 5A7260 r Found smartreader device Serial:Reader F40B5A9
2013/04/06 09:08:35 5A7260 r hdplus [smartreader] Reader initialized (device=Serial:Reader F40B5A9, detect=cd, mhz=600, cardmhz=600)
2013/04/06 09:08:37 5A7260 r hdplus [smartreader] card detected
2013/04/06 09:08:40 5A7260 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/06 09:08:40 5A7260 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/06 09:08:40 5A7260 r hdplus [smartreader] Calculated work ETU is 62.00 us
2013/04/06 09:08:40 5A7260 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/04/06 09:08:41 5A7260 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/06 09:08:43 5A7260 r hdplus [smartreader] detect native nagra card
2013/04/06 09:08:44 5A7260 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/04/06 09:08:45 5A7260 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/04/06 09:08:48 5A7260 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/06 09:08:48 5A7260 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/06 09:08:48 5A7260 r hdplus [smartreader] Calculated work ETU is 62.00 us
2013/04/06 09:08:48 5A7260 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/04/06 09:08:49 5A7260 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/06 09:08:50 5A7260 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/04/06 09:08:51 5A7260 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/04/06 09:08:54 5A7260 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/04/06 09:08:54 5A7260 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/04/06 09:08:54 5A7260 r hdplus [smartreader] Calculated work ETU is 62.00 us
2013/04/06 09:08:55 5A7260 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/04/06 09:08:56 5A7260 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/04/06 09:08:56 5A7260 r hdplus [smartreader] card system not supported
2013/04/06 09:08:56 5A7260 r hdplus [smartreader] card initializing error
2013/04/06 09:08:56 0 s init for all local cards done
2013/04/06 09:08:56 0 s anti cascading disabled

EDIT:
Ich habe soeben meine S02 Karte mit dem Reader und Image erfolgreich initialisieren können, somit scheint ja Hardwareseitig alles ok zu sein.
Die HD02 Karte ist in einem HD+ zertifizierten Reciever ebenfalls hell, funktioniert also auch.

Kann mir jemand mal seine funktionierende oscam.server für smargo und hd+ über PN zur Verfügung stellen


EDIT:

Eija jetzt läufts und Karte wird erkannt

Wichtig ist auch immer in dieser Konstellation nach Änderungen die FB stromlos zu machen und komplett mit Reader etc neubooten zu lassen. Ein einfacher Restart der OSCAM reicht nicht aus.

Danke im Voraus!

Grüße