Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

G02 und G09 gleichzeitig

    Nobody is reading this thread right now.
AW: G02 und G09 gleichzeitig

Hi,

glauben heist nicht wissen. Hast du oder hast du nicht? Wenn es mit einer nicht funktioniert auch mal eine andere testen.

Grüße

Kermit
 
AW: G02 und G09 gleichzeitig

Bei der Fritzbox ist das leider immer ein Glücksspiel, in welcher Reihenfolge die Reader nach einem Neustart angemeldet werden. Darum sollte man den Readern einen festen Port mit Hilfe ihrer ID in den udev Regeln anmelden.

Eine Anleitung dazu findest Du hier: [h=3] FAQ: Reader ein festen Port zuweisen.[/h]
 
Re: AW: G02 und G09 gleichzeitig

/var/oscam/cs/oscam/oscam: line 1: syntax error: unexpected word (expecting ")") bei fw: 1.20 #7814

/var/oscam/cs/oscam/oscam: line 1: can't create Ú¢b¥•Vm©¢¥: Read-only file system /var/oscam/cs/oscam/oscam: line 1: ‹6¼!B[ìaræL2f^Î9: not found /var/oscam/cs/oscam/oscam: line 1: TÕµ^“Ìä: not found /var/oscam/cs/oscam/oscam: line 1: ‹Ò™PÔZ{: not found /var/oscam/cs/oscam/oscam: line 2: syntax error: unexpected ")"

bei version: 1.20 #7884

die fehler bekomm ich öfters wenn ich ne oscam version einspiele. :(
 
Re: AW: G02 und G09 gleichzeitig

ok hab ne firmware gefunden die drauf läuft! fw: 1.20-unstable_by_EasyBuild_svn Rev. 7245
leider erkennt er immernoch net beide readers, da spinnt er einfach

danke an alle schonmal und
@Mogelhieb
ich les mir das mal durch und teste es und geb dann bescheid, danke!
 
ich glaub eher nicht. das immer noch das selbe er will sie lesen, gibt sie wieder aus sagt fehler und fängt von vorne an.
2012/11/11 18:33:02 0 s version=1.20-unstable_by_EasyBuild_svn, build #7245, system=mips-linux-uclibc-libusb, nice=-1
2012/11/11 18:33:02 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/11/11 18:33:02 0 s max. logsize=300 Kb, loghistorysize=4096 bytes
2012/11/11 18:33:02 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/11/11 18:33:02 0 s services reloaded: 0 services freed, 36 services loaded, rejected 0
2012/11/11 18:33:02 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/11/11 18:33:02 0 s signal handling initialized (type=sysv)
2012/11/11 18:33:03 0 s 891 service-id's loaded in 27ms
2012/11/11 18:33:03 0 s 256 tier-id's loaded
2012/11/11 18:33:03 0 s 10 provid's loaded
2012/11/11 18:33:03 0 s 22 lengths for caid guessing loaded
2012/11/11 18:33:03 0 s can't open whitelist file /var/oscam/cs/oscam/oscam.whitelist
2012/11/11 18:33:03 0 s can't open cacheex-matcher file /var/oscam/cs/oscam/oscam.cacheex
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s monitor: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s camd33: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s camd35: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s cs378x: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s newcamd: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s cccam: initialized (fd=6, port=12000, crypted)
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s pandora: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s csp: disabled
2012/11/11 18:33:03 0 s Starting listener 0
2012/11/11 18:33:03 0 s radegast: disabled
2012/11/11 18:33:03 0 s starting thread http
2012/11/11 18:33:03 0 s http thread started
2012/11/11 18:33:03 0 s starting thread reader check
2012/11/11 18:33:03 5CCEA0 h HTTP Server listening on port 83
2012/11/11 18:33:03 0 s reader check thread started
2012/11/11 18:33:03 0 s starting thread check
2012/11/11 18:33:03 0 s check thread started
2012/11/11 18:33:03 0 s akarte [mouse] creating thread for device /dev/ttyUSB0
2012/11/11 18:33:03 0 s basdfw [mouse] creating thread for device /dev/ttyUSB1
2012/11/11 18:33:03 0 s waiting for local card init
2012/11/11 18:33:03 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:03 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:04 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:05 5CE698 r akarte [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/11/11 18:33:05 5ED738 r basdfw [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2012/11/11 18:33:06 5CE698 r akarte [mouse] ERROR: Phoenix_GetStatus: ioctl error in card detection
2012/11/11 18:33:06 5CE698 r akarte [mouse] Error getting status of terminal.
2012/11/11 18:33:06 5ED738 r basdfw [mouse] card detected
2012/11/11 18:33:06 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:07 5CE698 r akarte [mouse] card detected
2012/11/11 18:33:07 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:07 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:10 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:11 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:13 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:16 5ED738 r basdfw [mouse] Error activating card.
2012/11/11 18:33:17 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:17 5CE698 r akarte [mouse] Error activating card.
2012/11/11 18:33:18 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:18 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:19 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:21 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:22 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:24 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:25 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:27 5ED738 r basdfw [mouse] Error activating card.
2012/11/11 18:33:27 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:28 5CE698 r akarte [mouse] Error activating card.
2012/11/11 18:33:28 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:29 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:30 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:32 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:33 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:35 5ED738 r basdfw [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:36 5CE698 r akarte [mouse] WARNING: Failed to reset reader
2012/11/11 18:33:38 5ED738 r basdfw [mouse] Error activating card.
2012/11/11 18:33:38 5ED738 r basdfw [mouse] card initializing error
2012/11/11 18:33:39 5ED738 r basdfw [mouse] ERROR: Phoenix_GetStatus: ioctl error in card detection
2012/11/11 18:33:39 5ED738 r basdfw [mouse] Error getting status of terminal.
2012/11/11 18:33:39 5CE698 r akarte [mouse] Error activating card.
2012/11/11 18:33:39 5CE698 r akarte [mouse] card initializing error
2012/11/11 18:33:40 5ED738 r basdfw [mouse] ERROR: Phoenix_GetStatus: ioctl error in card detection
2012/11/11 18:33:40 5ED738 r basdfw [mouse] Error getting status of terminal.
2012/11/11 18:33:40 0 s init for all local cards done
2012/11/11 18:33:40 5F3298 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 5F3298 c thread 4409 ended!
2012/11/11 18:33:40 5EEF30 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 5EEF30 c thread 4008 ended!
2012/11/11 18:33:40 5FF818 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 5FF818 c thread 480B ended!
2012/11/11 18:33:40 601010 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 601010 c thread 4C0C ended!
2012/11/11 18:33:40 6069A8 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 6069A8 c thread 580F ended!
2012/11/11 18:33:40 6051B0 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 6051B0 c thread 540E ended!
2012/11/11 18:33:40 6039B8 c anonymous disconnected from 192.168.178.21
2012/11/11 18:33:40 6039B8 c thread 500D ended!
2012/11/11 18:33:40 609B58 c encrypted cccam-client 192.168.178.21 granted (us, au=auto (2 reader))
 
AW: G02 und G09 gleichzeitig

Hi,

es scheitert schon beim ersten Kontakt des Readers mit der Karte. Der ATR (Answer to Reset) wird ja noch nicht mal im Ansatz gelesen. Das ist aber beim einzelnen Einlesen schon besser?

Hast du mal ein Log von nur einem Reader, bei dem das funzt?

Lieben Gruß
Bombadil
 
Re: AW: G02 und G09 gleichzeitig

also hier ist das log wo ein reader aktiv ist und der funktioniert wobei in der mitte nen fehler drin hab, da hab cih den falschen reader aktivieren wollen. also eher anfang und ende relevant
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Nov 11 18:36:39 2012
-------------------------------------------------------------------------------
2012/11/11 18:36:39 0 s starting thread log_list_thread
2012/11/11 18:36:39 0 s log_list_thread thread started
2012/11/11 18:36:39 0 s >> OSCam << cardserver started, version 1.20-unstable_by_EasyBuild_svn, build #7245 (mips-linux-uclibc-libusb)
2012/11/11 18:36:39 0 s version=1.20-unstable_by_EasyBuild_svn, build #7245, system=mips-linux-uclibc-libusb, nice=-1
2012/11/11 18:36:39 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/11/11 18:36:39 0 s max. logsize=300 Kb, loghistorysize=4096 bytes
2012/11/11 18:36:39 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/11/11 18:36:39 0 s services reloaded: 0 services freed, 36 services loaded, rejected 0
2012/11/11 18:36:39 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/11/11 18:36:39 0 s signal handling initialized (type=sysv)
2012/11/11 18:36:39 0 s 891 service-id's loaded in 24ms
2012/11/11 18:36:39 0 s 256 tier-id's loaded
2012/11/11 18:36:39 0 s 10 provid's loaded
2012/11/11 18:36:39 0 s 22 lengths for caid guessing loaded
2012/11/11 18:36:39 0 s can't open whitelist file /var/oscam/cs/oscam/oscam.whitelist
2012/11/11 18:36:39 0 s can't open cacheex-matcher file /var/oscam/cs/oscam/oscam.cacheex
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s monitor: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s camd33: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s camd35: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s cs378x: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s newcamd: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s cccam: initialized (fd=6, port=12000, crypted)
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s pandora: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s csp: disabled
2012/11/11 18:36:39 0 s Starting listener 0
2012/11/11 18:36:39 0 s radegast: disabled
2012/11/11 18:36:39 0 s starting thread http
2012/11/11 18:36:39 5CCEA0 h HTTP Server listening on port 83
2012/11/11 18:36:39 0 s http thread started
2012/11/11 18:36:39 0 s starting thread reader check
2012/11/11 18:36:39 0 s reader check thread started
2012/11/11 18:36:39 0 s starting thread check
2012/11/11 18:36:39 0 s check thread started
2012/11/11 18:36:39 0 s basdfw [mouse] creating thread for device /dev/ttyUSB1
2012/11/11 18:36:39 0 s waiting for local card init
2012/11/11 18:36:41 5EBF40 r basdfw [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2012/11/11 18:36:42 5EBF40 r basdfw [mouse] card detected
2012/11/11 18:36:48 5EBF40 r basdfw [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2012/11/11 18:36:50 5EBF40 r basdfw [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/11/11 18:36:52 5EBF40 r basdfw [mouse] parental lock setting: FF FF FF FF
2012/11/11 18:36:52 5EBF40 r basdfw [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2012/11/11 18:36:52 5EBF40 r basdfw [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/11/11 18:36:52 5EBF40 r basdfw [mouse] ready for requests
2012/11/11 18:36:52 5EBF40 r basdfw [mouse] found cardsystem videoguard2
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] card detected
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 00f3, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 00f4, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 00fa, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 00fe, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 0101, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 0133, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:52 5EBF40 r basdfw [videoguard2] tier: 0137, expiry date: 2013/01/27-00:00:00
2012/11/11 18:36:53 0 s init for all local cards done
2012/11/11 18:36:53 5F7580 c anonymous disconnected from 192.168.178.21
2012/11/11 18:36:53 5F7580 c thread 300A ended!
2012/11/11 18:36:53 5F5D88 c anonymous disconnected from 192.168.178.21
2012/11/11 18:36:53 5F5D88 c thread 2C08 ended!
2012/11/11 18:36:54 5FB0D8 c encrypted cccam-client 192.168.178.21 granted (us, au=auto (2 reader))
2012/11/11 18:37:01 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:01 5FB0D8 c us (09C7&000000/0000/0083/A9:823F): not found (568 ms) by basdfw
2012/11/11 18:37:08 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:08 5FB0D8 c us (09C7&000000/0000/0083/A9:CF75): not found (549 ms) by basdfw
2012/11/11 18:37:15 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:15 5FB0D8 c us (09C7&000000/0000/0083/A9:9A77): not found (555 ms) by basdfw
2012/11/11 18:37:22 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:22 5FB0D8 c us (09C7&000000/0000/0083/A9:1B0C): not found (546 ms) by basdfw
2012/11/11 18:37:29 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:29 5FB0D8 c us (09C7&000000/0000/0083/A9:5840): not found (553 ms) by basdfw
2012/11/11 18:37:34 5FB0D8 c us (09C7&000000/0000/0083/A9:5840): not found (121 ms) by basdfw
2012/11/11 18:37:36 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:36 5FB0D8 c us (09C7&000000/0000/0083/A9:F78F): not found (549 ms) by basdfw
2012/11/11 18:37:39 5FB0D8 c us (09C7&000000/0000/0083/A9:F78F): not found (121 ms) by basdfw
2012/11/11 18:37:41 5FB0D8 c us (09C7&000000/0000/C35C/5D:7A09): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:37:49 0 --- Skipped 1 duplicated log lines ---
2012/11/11 18:37:49 5FB0D8 c us (09C7&000000/0000/C35B/5D:C909): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:37:53 5FB0D8 c us (09C7&000000/0000/C35B/5D:C909): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:37:59 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:37:59 5FB0D8 c us (09C7&000000/0000/0083/A9:B8E8): not found (554 ms) by basdfw
2012/11/11 18:38:03 5FB0D8 c us (09C7&000000/0000/0083/A9:B8E8): not found (121 ms) by basdfw
2012/11/11 18:38:04 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:38:04 5FB0D8 c us (09C7&000000/0000/0083/A9:96D1): not found (557 ms) by basdfw
2012/11/11 18:38:09 5FB0D8 c us (09C7&000000/0000/0083/A9:96D1): not found (121 ms) by basdfw
2012/11/11 18:38:11 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:38:11 5FB0D8 c us (09C7&000000/0000/0083/A9:8839): not found (546 ms) by basdfw
2012/11/11 18:38:15 5FB0D8 c us (09C7&000000/0000/0083/A9:8839): not found (120 ms) by basdfw
2012/11/11 18:38:18 5EBF40 r basdfw [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/11 18:38:18 5FB0D8 c us (09C7&000000/0000/0083/A9:84CB): not found (544 ms) by basdfw
2012/11/11 18:38:21 5FB0D8 c us (09C7&000000/0000/0083/A9:84CB): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:38:25 5FB0D8 c us (09C7&000000/0000/0083/A9:4C4C): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:38:25 5CCEA0 h akarte [mouse] Restarting reader
2012/11/11 18:38:25 5CCEA0 h akarte [mouse] creating thread for device /dev/ttyUSB0
2012/11/11 18:38:27 5FB0D8 c us (09C7&000000/0000/0083/A9:4C4C): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:38:28 5F5D78 r akarte [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/11/11 18:38:28 5F5D78 r akarte [mouse] card detected
2012/11/11 18:38:32 5FB0D8 c us (09C7&000000/0000/0083/A9:72A8): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:38:34 5F5D78 r akarte [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2012/11/11 18:38:36 5F5D78 r akarte [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/11/11 18:38:37 5FB0D8 c us (09C7&000000/0000/C35C/5D:3CD2): rejected group (120 ms) (0/0/0/0) (no matching reader)
2012/11/11 18:38:38 5F5D78 r akarte [mouse] parental lock setting: FF FF FF FF
2012/11/11 18:38:38 5F5D78 r akarte [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2012/11/11 18:38:38 5F5D78 r akarte [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/11/11 18:38:38 5F5D78 r akarte [mouse] ready for requests
2012/11/11 18:38:38 5F5D78 r akarte [mouse] found cardsystem videoguard2
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] card detected
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 0065, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 0066, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 0067, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 0068, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 0069, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:38 5F5D78 r akarte [videoguard2] tier: 006a, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:39 5F5D78 r akarte [videoguard2] tier: 006b, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:39 5F5D78 r akarte [videoguard2] tier: 006c, expiry date: 2012/12/07-00:00:00
2012/11/11 18:38:39 5F5D78 r akarte [videoguard2] tier: 006d, expiry date: 2012/12/07-00:00:00
 
hilft vllt eine andere firmware des freetz? wenn ja könnt ihr eine empfehlen?
 
so ich hab das problem nun gelöst, woran lag es lag weiss ich nicht aber jetzt läuft alles tadellos. ich habe eine andere firmware auf die fritz gehauen: 107.05.08-freetz-devel-8531M. Das Problem bei der FW für mcih war, dass sie OScam auf einem USB-Stick benötigt. also hab ich noch den USB nach der Anleitung eingerichtet und siehe da, es geht alles einwandfrei. ich hatte noch nen kleinen aussetzer wo wiedermal gar nix ging, was denke ich bei der ganzen technik normal ist :) aber da war das problem, dass der usb unbedingt an die stromversorgung musste. so ich hoffe ich kann einigen helfen, die auch tage damit verbringen ihre fritz zum laufen zu bringen :)
 
Zurück
Oben