Fritzbox 7170 steh voll auf dem Schlauch

[mav2]

Hallo Leute,
hab eine Fritzbox 7170 hinter einer Fritzbox 7390.
Bisher hatte ich eine S02 und eine HD01 über Oscam und CCCam am laufen.
Ist schon lange her das ich alles eingerichtet habe und bin deshalb nicht mehr so up to date.
Wegen bevorstehendem Kartenwechsel wollte ich jetzt umsteigen.
Wenn ich alles richtig verstanden habe läuft jetzt alles über Oscam.
Wollte alles mit dem HowTo:Freetz-Image mit Oscam-1.4... einstellen.
Recovery Image und das Flashen des Freetz Image hat auch soweit geklappt.
Freetz Image ist soweit eingerichtet.
Da im Status-Menü nicht genug Speicher frei war nochmal mit Partition löschen geflasht.
Hat soweit auch funktioniert.
Fritzbox ist auch eingerichtet das ich sie hinter meiner anderen Fritze ansprechen kann.
Oscam iinstallieren hat auch geklappt.
USB -Stick wird als /*var/*media/*ftp/*UStor01 erkannt.
Nun zu meinen Problemen
1. Swap lässt sich nicht starten bzw. keine Swap Datei erstellen
2. Ich wollte Port-Forwarding einstellen, aber der Menüpunkt AVM-Firewall fehlt.
Fernwartung ist aktiviert.

Mein Image ist das aktuelle CI_7170_04.88-freetz-devel-12947M.de_20150221-113729
Oscam ist oscam-emu-mips-freetz-10659-fritz71xx-75xx-webif-libusb_s
Ob ich Swap unbedingt brauche bin ich mir nicht sicher.
Aber ich denke ohne die Portweiterleitung brauche ich gar nicht mit den Oscam Einstellungen beginnen.

Hab die ganze Prozedur schon Zweimal gemacht, aber immer das selbe Problem.
Eine external Datei war bei dem Image nicht dabei.

Hoffe ihr könnt mir sagen wo der Fehler bei mir liegt und wie ich am besten weiter vorgehe.

Danke euch auf jeden Fall schon mal im voraus.

mav2

 

[Django1807]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Swap brsuchst du nicht und Portfreigabe machst du in der 7390


Gesendet vom iPhone

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Bei den CI-Image ist alles rausgepacht,ausser Wlan und VPN. Bedeutet DSL ist somit auch raus,dadurch automatisch auch kein Portweiterleitung mehr vorhanden.
Man muss in der Hauptbox nun einfach den CS-Port zur Fritzbox mit dem CI-Image weiterleiten

Swap wird nicht benötigt. Die 7170 hat als CI 1,4 MB Platz intern. Ist somit für den normalen Betrieb genug Speicherplatz da. Wenn man loggen( mehr als 100kb) will wird es aber knapp. Die Fusebyte-Payloadabfrage geht wegen mind 4 MB Loggrösse nur im USB-Modus oder du nurtz den Intern-Modus.Loggst aber auf einen Stick

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Danke euch beiden.
Da ich die 7170 schon vorher hinter der 7390 hatte müsste die Portweiterleitung ja schon eingerichtet sein.
Da ich ja eh einen USB-Stick dran hatte könnte ich ja den USB-Modus verwenden.
Oder hat der Interne Modus einen Geschwindigkeitsvorteil?

Gut dann kann ich mich ja mal ans Einrichten machen

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Der Intern- Modus hat den Vorteil. Das man bei z.B. eine Karte kein Hub braucht. Die Antwortzeiten werden nicht gross anders sein

Gesendet von meinem JY-G3 mit Tapatalk

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Hab´s mal soweit eingerichtet.
Aber leider funktioniert es nicht.

Die S02 Karte ist in einer Easymouse mit den Einstellungen die ich vorher auch schon hatte.
Die Weiße HD01 ist in einem Argolis Smargo ebenfalls mit den alten Einstellungen.
Beide hängen an einem USB-Hub 4-fach USB-Hub mit noch einem Stick.
Hat aber so alles vorher funktioniert.

Meine Configs sind:

oscam.config:

Spoiler

# inkl. Blue_Shadow_V.2.css

[global]
# Speicherpfad für OSCam-logfile. Wird bei der Installation automatisch

# auf das Arbeitsverzeichnis von oscam umgesetzt.
logfile = /var/media/ftp/UStor01/addon/oscam/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir = 0
# Verzeichnisangabe für emmlogdir.
# Ohne Angabe ist das das Arbeitsverzeichnis von oscam
#emmlogdir =
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0


[monitor]
port = (hab hier den Port eingetragen den ich vorher hatte?)

#nocrypt = 192.168.0.0-192.168.255.255
aulow = 120

#hideclient_to = 30
monlevel = 1

#appendchaninfo = 0


#[newcamd]
#port = 34002@1830:003411;34003@09c4:000000;34004@0b00:000000
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0



[cccam]
port = mein Port
reshare = 0
version = 2.3.0
keepconnected = 1
stealth = 1
#reshare_mode = 0
#updateinterval = 240
#ignorereshare = 1
#minimizecards = 0
nodeid = AFAB2AE11075151E


[webif]
httpport = 83
httpuser = mein Benutzername
httppwd = mein Passwort

# Speicherpfad für das Stylesheet. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.

httpcss = /var/media/ftp/UStor01/addon/oscam/Blue_Shadow_V.2.css
httprefresh = 10

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

oscam.provid:

Spoiler

# uStor
1830:000000 | HD+ HD01|19.2E|de
1830:003411 | HD+ HD01|19.2E|de
1830:008011 | HD+ HD01|19.2E|de
09C4:000000 | Sky de|19.2E|de

oscam.Servers:

Spoiler

# uStor

#Readereinstellungen fuer ein weisse HD+Karte

[reader]

label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = hdplus
smargopatch = 1
caid = 1830
rsakey = mein alter rsakey
boxkey = mein alter boxkey
ecmwhitelist = 1830:92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2
blockemm-unknown = 1


#Readereinstellungen fuer ein S01/S02/P01/P02

[reader]
label = skysat
enable = 1
protocol = mouse
detect = cd
device = /dev/ttyUSB1
services = skyde
group = 2
caid = 1702,1833
mhz = 600
cardmhz = 600
emmcache = 1,3,2
lb_weight = 300
ecmwhitelist =1702:93


#Readereinstellungen fuer ein V13
#[reader]
#label = sky
#enable = 1
#protocol = mouse
#device = /dev/ttyUSB3
#services =skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport
#caid = 09C4
#boxid = 12345678
#ecmwhitelist = 46,90
#detect = cd
#mhz = 357
#cardmhz = 357
#ident = 09C4:000000
#group = 4
#emmcache = 1,2,2
#ins7e11 = 15
#ndsversion = 2
#blockemm-unknown = 1
#blockemm-u = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1

#Readereinstellungen fuer ein V14
#[reader]
#label = sky
#enable = 1
#protocol = mouse
#device = /dev/ttyUSB4
#services =skywelt,skyweltextra,skyfilm,skyhd,skyppv,skysport
#caid = 098C
#boxid = 12345678
#ecmwhitelist = 098C:98,9B,97,57,91
#ecmheaderwhitelist =81709800000120,80709800000120,8170950000011D,8070950000011D,8070940000011C,8170940000011C,8170540000011D,8070540000011D#detect = cd
#mhz = 357
#cardmhz = 357
#ident = 098C:000000
#group = 5
#emmcache = 1,2,2
#ins7e11 = 15
#ndsversion = 2
#blockemm-unknown = 1
#blockemm-u = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1


#Hier die Verbindung zu einem CCcamserver eintragen
#[reader]
#label = cccam_reader
#enable = 1
#protocol = cccam
#device = 192.168.178.111,10000
#account = oscam
#password = oscam
#services =
#inactivitytimeout = 1
#reconnecttimeout = 30
#caid = 1830,09C4,0B00,0D05
#ident =
#group = 11
#lb_weight = 100
#cccversion = 2.0.11
#cccmaxhops = 10

#Keyservereinstellungen fuer ein orf/um-keys
#[reader]
#label = keyserver
#protocol = camd35
#device = localhost,12345
#user = server
#password = pass
#services = orf-key,um-key
#reconnecttimeout = 300
#group = 10


#Keyservereinstellungen fuer ein orf/um-keys bei eineroscam-emu

#[reader]
#label = emu2
#protocol = camd35
#device = 127.0.0.1
#user = Emu
#password = emu
#caid = 0D00,0D02,0D03,0D05,090F
#ecmwhitelist =0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
#ident =0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
#group = 12

Oscam.Services:

Spoiler

# uStor
[skyall]
caid = 1702,1833,09C4,098C
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,
0026,0027,0029,002A,002B,0032,0034,001E,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,0046,0069,0070,0071,
0072,0073,006A,006B,006C,006D,006E,006F,006D,0065,0066,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,
0082,0083,0084,00A8,00DD,00DE,00DF,00FB,00F2,00FC,00FD,00FE,0105,0106,0107,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,
012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,014E,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,
3331,4461,4462,6FB8,6FF1,7001,7009,700A,013E,0148,015C,010E,0118,0122,012C,0136,0140,014A,0154,0104

[hdplus]
caid = 1830,1843,1860
provid = 000000,003411,008011
srvid = 1519,277E,5273,5274,EF10,EF11,EF14,EF15,EF74,EF75, EF76,EF77,2E9B,151A,157F
[select]
caid = 1702
provid =
srvid = 00FB,0105,010F,0119,0123,012D,0137,0141,014B,00FE, 014E,0078

oscam.users:

Spoiler

# uStor

[account]
user = user Box1
pwd = Passw. Box1
uniq = 1
keepalive = 1
au = sky,hd+
betatunnel =1833.FFFF:1702
group = 1,2
services = sky,hdplus



[account]
user = user Box2
pwd = Passw.Box2
uniq = 1
keepalive = 1
au = sky,hd+
betatunnel =1833.FFFF:1702
group = 1,2
services = sky,hdplus

Auf das Oscam Webinterface kann ich zugreifen
Unter Reader steht:

Spoiler

READER DEVICE ERROR

Sie müssen registriert sein, um Links zu sehen.

Hoffe ihr könnt mir weiterhelfen

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Hast du den FTDI- Treiber aktiviert?
Poste mal ein Log der oscam komplett vom Start an

Gesendet von meinem JY-G3 mit Tapatalk

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Bei FTDI Treiber hab ich:

Spoiler

Bei
USB Comport (Treiberauswahl) USB Comport mit einem Treiber aktivieren

ist ein Haken drin

FTDI_SIO Modul wählen

ausgewählt.
hab Dir das Log erstmal als PN zugeschickt weil ich mir nicht sicher bin ob ich alles herausgenommen habe was nicht öffentlich ist.
Hoffe das ist OK

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

So hab Oscam nochmal neu gestartet und bekomm dann folgendes Log-
Hoffe das ist so OK

Spoiler

---------------------------------------------------------------------------
----
>> OSCam << cardserver started at Thu May 21 18:57:35 2015
---------------------------------------------------------------------------
----
2015/05/21 18:57:35 0 s >> OSCam << cardserver started, version
1.20-emu, build r10659 (mipsel-linux-uclibc-libusb)
2015/05/21 18:57:35 0 s (main) System name = Linux
2015/05/21 18:57:35 0 s (main) Host name =
fritz.fonwlan.box
2015/05/21 18:57:35 0 s (main) Release = 2.6.13.1-ohio
2015/05/21 18:57:35 0 s (main) Version = #1 Wed Jan 21
16:48:51 CET 2015
2015/05/21 18:57:35 0 s (main) Machine = mips
2015/05/21 18:57:35 0 s (main) creating pidfile
/tmp/.oscam/oscam.pid with pid 1612
2015/05/21 18:57:35 0 s (config) services reloaded: 0 services
freed, 3 services loaded, rejected 0
2015/05/21 18:57:35 0 s [Emu] oscam-emu version 715
2015/05/21 18:57:35 0 s (config) userdb reloaded: 2 accounts
loaded, 0 expired, 0 disabled
2015/05/21 18:57:35 0 s (main) signal handling initialized
2015/05/21 18:57:35 0 s (config) 159 service-id's loaded in 12 ms
2015/05/21 18:57:35 0 s (config) 161 tier-id's loaded
2015/05/21 18:57:35 0 s (config) 4 provid's loaded
2015/05/21 18:57:35 0 s (net) monitor: initialized (fd=6,
port=16001)
2015/05/21 18:57:35 0 s (net) cccam: initialized (fd=7,
port=33458)
2015/05/21 18:57:35 547B48 h (webif) webif: decompressed 101862 bytes
back into 270276 bytes
2015/05/21 18:57:35 547B48 h (webif) HTTP Server running. ip=0.0.0.0
port=83
2015/05/21 18:57:35 0 s (reader) hdplus [mouse] creating thread
for device /dev/ttyUSB0
2015/05/21 18:57:35 0 s (reader) skysat [mouse] creating thread
for device /dev/ttyUSB1
2015/05/21 18:57:35 0 s (reader) emulator [emu] creating thread
for device emulator
2015/05/21 18:57:36 0 s (stat) loadbalancer: can't read from
file /tmp/.oscam/stat
2015/05/21 18:57:36 0 s (main) waiting for local card init
2015/05/21 18:57:36 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 89350
2015/05/21 18:57:36 5520C0 r (reader) skysat [mouse] Buffers readed 0
bytes total time_us 85649
2015/05/21 18:57:36 554C30 r reading key file:
/var/media/ftp/UStor01/addon/oscam/SoftCam.Key
2015/05/21 18:57:36 5520C0 r (reader) skysat [mouse] Buffers readed 0
bytes total time_us 89872
2015/05/21 18:57:36 5520C0 r (reader) skysat [mouse] Reader initialized
(device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
2015/05/21 18:57:36 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 90787
2015/05/21 18:57:36 5517F0 r (reader) hdplus [mouse] Reader initialized
(device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2015/05/21 18:57:36 554C30 r (reader) emulator [emu] Reader initialized
(device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/21 18:57:36 554C30 r (reader) emulator [emu] card detected
2015/05/21 18:57:36 5517F0 r (reader) hdplus [mouse] card detected
2015/05/21 18:57:37 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 89792
2015/05/21 18:57:38 554C30 r (reader) emulator [emu] found card system
emu
2015/05/21 18:57:38 554C30 r (reader) emulator [emu] THIS WAS A
SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/21 18:57:38 554C30 r reading key file:
/var/media/ftp/UStor01/addon/oscam/SoftCam.Key
2015/05/21 18:57:38 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 89917
2015/05/21 18:57:40 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 90234
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] ATR: xx xx xx xx
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Init card protocol
T1, FI=9, F=512, D=16, N=255
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Setting baudrate
to 115200 bps
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Calculated work
ETU is 8.70 us reader mhz = 368
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 1 value 03 time_us 3428
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 2 value 00 time_us 12937
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 3 value 56 time_us 15229
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 4 value ff time_us 13770
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 5 value 00 time_us 13422
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 6 value 76 time_us 13630
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 7 value 7e time_us 13744
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 8 value 71 time_us 13723
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 9 value 80 time_us 18255
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 10 value 1d time_us 17971
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 11 value ff time_us 18152
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 12 value dd time_us 18169
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 13 value 8d time_us 19856
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 14 value 7d time_us 18144
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 15 value 35 time_us 18099
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 16 value f5 time_us 18074
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 17 value 73 time_us 18099
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 18 value d3 time_us 18021
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 19 value b3 time_us 18020
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 20 value fb time_us 18101
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 21 value b5 time_us 18104
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 22 value 59 time_us 18114
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 23 value 91 time_us 17882
2015/05/21 18:57:41 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 24 value 1d time_us 18150
2015/05/21 18:57:42 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 25 value 3d time_us 18000
2015/05/21 18:57:42 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 26 value 93 time_us 18120
2015/05/21 18:57:42 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 27 value 79 time_us 18158
2015/05/21 18:57:42 5517F0 r (reader) hdplus [mouse] Buffers readed 27
bytes total time_us 559485
2015/05/21 18:57:42 5517F0 r (reader) hdplus [mouse] ATR Fsmax is 5
MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in
reader->mhz)
2015/05/21 18:57:43 5517F0 r (reader) hdplus [mouse] Warning: Card
returned error on setting ifsd value to 28
2015/05/21 18:57:44 5517F0 r (reader) hdplus [mouse] detect native
nagra card
2015/05/21 18:57:46 5517F0 r (reader) hdplus [mouse] Resync error:
readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] T1 Resync command
error, trying to reactivate!
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 1 value 03 time_us 3457
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 2 value 00 time_us 13710
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 3 value 56 time_us 15116
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 4 value ff time_us 13625
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 5 value 00 time_us 13712
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 6 value 76 time_us 13754
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 7 value 7e time_us 13609
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 8 value 71 time_us 13736
2015/05/21 18:57:47 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 9 value 80 time_us 18036
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 10 value 1d time_us 18056
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 11 value ff time_us 18237
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 12 value dd time_us 18097
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 13 value 8d time_us 20115
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 14 value 7d time_us 17987
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 15 value 35 time_us 18175
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 16 value f5 time_us 17729
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 17 value 73 time_us 18100
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 18 value d3 time_us 18126
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 19 value b3 time_us 18007
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 20 value fb time_us 17987
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 21 value b5 time_us 17961
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 22 value 59 time_us 18076
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 23 value 91 time_us 18073
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 24 value 1d time_us 18088
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 25 value 3d time_us 18125
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 26 value 93 time_us 18054
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 27 value 79 time_us 18104
2015/05/21 18:57:48 5517F0 r (reader) hdplus [mouse] Buffers readed 27
bytes total time_us 556661
2015/05/21 18:57:49 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 90075
2015/05/21 18:57:51 5517F0 r (reader) hdplus [mouse] Buffers readed 0
bytes total time_us 89879
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] ATR: xx xx xx xx
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Init card protocol
T1, FI=9, F=512, D=16, N=255
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Setting baudrate
to 115200 bps
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Calculated work
ETU is 8.70 us reader mhz = 368
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 1 value 03 time_us 3402
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 2 value 00 time_us 13703
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 3 value 56 time_us 15030
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 4 value ff time_us 13800
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 5 value 00 time_us 13209
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 6 value 76 time_us 13665
2015/05/21 18:57:52 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 7 value 7e time_us 13608
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 8 value 71 time_us 13613
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 9 value 80 time_us 18110
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 10 value 1d time_us 17433
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 11 value ff time_us 17924
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 12 value dd time_us 18168
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 13 value 8d time_us 20342
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 14 value 7d time_us 18085
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 15 value 35 time_us 18141
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 16 value f5 time_us 17977
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 17 value 73 time_us 18060
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 18 value d3 time_us 18026
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 19 value b3 time_us 18059
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 20 value fb time_us 18115
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 21 value b5 time_us 17930
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 22 value 59 time_us 18141
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 23 value 91 time_us 18036
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 24 value 1d time_us 18067
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 25 value 3d time_us 18092
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 26 value 93 time_us 18064
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Flush readed byte
Nr 27 value 79 time_us 18093
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] Buffers readed 27
bytes total time_us 559140
2015/05/21 18:57:53 5517F0 r (reader) hdplus [mouse] ATR Fsmax is 5
MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in
reader->mhz)
2015/05/21 18:57:55 5517F0 r (reader) hdplus [mouse] Warning: Card
returned error on setting ifsd value to 28

Hoffe ihr könnt damit was anfangen.

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Änder mal bitte den device der beiden reader. Das die skykarte /dev/ttyUSB0 bekommt und die HD+Karte /dev/ttyUSB1
Danach oscamneustarten,besser ist bei den 71er boxen die Fritzbox zu rebooten. Danch oscamlog im spoiler mit code posten

Die oscam.reader ist soweit OK

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Ok die Änderung hab ich gemacht.
Was mir auffällt nach reboot muss ich die Oscam manuell starten obwohl Starttyp auf Automatik steht.
Nach manuellem start läufts.

Danch oscamlog im spoiler mit code posten

Hoffe das ist so richtig

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu May 21 20:01:41 2015
-------------------------------------------------------------------------------
2015/05/21 20:01:41 0 s >> OSCam << cardserver started, version 1.20-emu, build r10659 (mipsel-linux-uclibc-libusb)
2015/05/21 20:01:41 0 s (main) System name = Linux
2015/05/21 20:01:41 0 s (main) Host name = fritz.fonwlan.box
2015/05/21 20:01:41 0 s (main) Release = 2.6.13.1-ohio
2015/05/21 20:01:41 0 s (main) Version = #1 Wed Jan 21 16:48:51 CET 2015
2015/05/21 20:01:41 0 s (main) Machine = mips
2015/05/21 20:01:41 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1931
2015/05/21 20:01:41 0 s (config) services reloaded: 0 services freed, 3 services loaded, rejected 0
2015/05/21 20:01:41 0 s [Emu] oscam-emu version 715
2015/05/21 20:01:41 0 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/05/21 20:01:41 0 s (main) signal handling initialized
2015/05/21 20:01:41 0 s (config) 159 service-id's loaded in 26 ms
2015/05/21 20:01:41 0 s (config) 161 tier-id's loaded
2015/05/21 20:01:41 0 s (config) 4 provid's loaded
2015/05/21 20:01:41 0 s (net) monitor: initialized (fd=6, port=16001)
2015/05/21 20:01:41 0 s (net) cccam: initialized (fd=7, port=33458)
2015/05/21 20:01:41 0 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB1
2015/05/21 20:01:41 0 s (reader) skysat [mouse] creating thread for device /dev/ttyUSB0
2015/05/21 20:01:41 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/21 20:01:41 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/21 20:01:41 0 s (main) waiting for local card init
2015/05/21 20:01:41 54F0A8 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
2015/05/21 20:01:41 54F0A8 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/05/21 20:01:41 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 87894
2015/05/21 20:01:41 547978 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 90108
2015/05/21 20:01:41 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 84944
2015/05/21 20:01:41 547EC8 r (reader) skysat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2015/05/21 20:01:41 547978 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 90106
2015/05/21 20:01:41 547978 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2015/05/21 20:01:41 54EBC8 r reading key file: /var/media/ftp/UStor01/addon/oscam/SoftCam.Key
2015/05/21 20:01:42 54EBC8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/21 20:01:42 54EBC8 r (reader) emulator [emu] card detected
2015/05/21 20:01:42 547EC8 r (reader) skysat [mouse] card detected
2015/05/21 20:01:42 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 85050
2015/05/21 20:01:43 54EBC8 r (reader) emulator [emu] found card system emu
2015/05/21 20:01:43 54EBC8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/21 20:01:43 54EBC8 r reading key file: /var/media/ftp/UStor01/addon/oscam/SoftCam.Key
2015/05/21 20:01:43 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 89562
2015/05/21 20:01:45 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 90106
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Setting baudrate to 187500 bps
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 1 value 03 time_us 3324
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 2 value 00 time_us 12951
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 3 value 56 time_us 15225
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 4 value ff time_us 13858
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 5 value 00 time_us 13544
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 6 value 76 time_us 13684
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 7 value 7e time_us 13607
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 8 value 71 time_us 13675
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 9 value 80 time_us 18109
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 10 value 1d time_us 18149
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 11 value ff time_us 18021
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 12 value dd time_us 18134
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 13 value 8d time_us 20343
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 14 value 7d time_us 18091
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 15 value 35 time_us 17844
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 16 value f5 time_us 18108
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 17 value 73 time_us 18100
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 18 value d3 time_us 18030
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 19 value b3 time_us 17937
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 20 value fb time_us 18080
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 21 value b5 time_us 17898
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 22 value 59 time_us 18108
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 23 value 91 time_us 18074
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 24 value 1d time_us 18118
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 25 value 3d time_us 18036
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 26 value 93 time_us 18078
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 27 value 79 time_us 18111
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] Buffers readed 27 bytes total time_us 559005
2015/05/21 20:01:47 547EC8 r (reader) skysat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/05/21 20:01:58 547EC8 r (reader) skysat [mouse] Warning: Card returned error on setting ifsd value to 251
2015/05/21 20:01:59 547EC8 r (reader) skysat [mouse] detect native nagra card
2015/05/21 20:01:59 547EC8 r (reader) skysat [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] T1 Resync command error, trying to reactivate!
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 1 value 03 time_us 3378
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 2 value 00 time_us 13679
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 3 value 56 time_us 15121
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 4 value ff time_us 13836
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 5 value 00 time_us 13648
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 6 value 76 time_us 14122
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 7 value 7e time_us 13177
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 8 value 71 time_us 13642
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 9 value 80 time_us 17879
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 10 value 1d time_us 18196
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 11 value ff time_us 18094
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 12 value dd time_us 18121
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 13 value 8d time_us 20083
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 14 value 7d time_us 18082
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 15 value 35 time_us 18013
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 16 value f5 time_us 18089
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 17 value 73 time_us 18045
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 18 value d3 time_us 18064
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 19 value b3 time_us 18139
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 20 value fb time_us 18009
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 21 value b5 time_us 17745
2015/05/21 20:02:00 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 22 value 59 time_us 18109
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 23 value 91 time_us 18132
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 24 value 1d time_us 17993
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 25 value 3d time_us 18137
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 26 value 93 time_us 17991
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 27 value 79 time_us 18228
2015/05/21 20:02:01 547EC8 r (reader) skysat [mouse] Buffers readed 27 bytes total time_us 556984
2015/05/21 20:02:02 547EC8 r (reader) skysat [mouse] Buffers readed 0 bytes total time_us 89877
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Setting baudrate to 187500 bps
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 1 value 03 time_us 2409
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 2 value 00 time_us 13202
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 3 value 56 time_us 15268
2015/05/21 20:02:03 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 4 value ff time_us 13632
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 5 value 00 time_us 13670
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 6 value 76 time_us 13422
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 7 value 7e time_us 13658
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 8 value 71 time_us 13721
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 9 value 80 time_us 18070
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 10 value 1d time_us 18144
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 11 value ff time_us 18229
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 12 value dd time_us 17680
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 13 value 8d time_us 20159
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 14 value 7d time_us 17990
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 15 value 35 time_us 18073
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 16 value f5 time_us 18099
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 17 value 73 time_us 18004
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 18 value d3 time_us 18055
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 19 value b3 time_us 18070
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 20 value fb time_us 18036
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 21 value b5 time_us 18022
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 22 value 59 time_us 18095
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 23 value 91 time_us 17978
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 24 value 1d time_us 17253
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 25 value 3d time_us 18155
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 26 value 93 time_us 18030
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Flush readed byte Nr 27 value 79 time_us 18038
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] Buffers readed 27 bytes total time_us 552691
2015/05/21 20:02:04 547EC8 r (reader) skysat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/05/21 20:02:05 547EC8 r (reader) skysat [mouse] Warning: Card returned error on setting ifsd value to 251

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Log ist OK. Gleiche Meldung

Wegen oscamstart nach reboot ist in der 7170 wohl ein Bug. Stell bei oscam auf manuel und füge in die rc_custom das rein

/etc/init.d/rc.oscam start

Die rc_custom findest du unter freetz. Danch die Fritzbox neu starten und Log posten

Sollten die Karten immer noch nicht erkannt werden. Müssen wir systematisch vorgehen. Dazu würde ich auf Intern-Modus stellen. Nur einen Reader aktivieren. reader in den USB mit Karte und Fritzbox neu starten

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Hab ich gemacht.
Aber obwohl der Aufruf in der rc_custom steht und bei oscam auf manuell steht startet oscam nicht automatisch?

 

[rolu2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Komisch. Gerade das CI-Image auf meiner 7170Testbox installiert. oscam startet wenn es auf automatisch steht. Intern-Modus

Welchsel mal bitte in den Intern-Modus und teste das da. USB-Modus teste ich morgen


Edit: USB-Modus startet bei mir auch nicht. Schau ich mir morgen mal und bau das neu

 

[mav2]

AW: Fritzbox 7170 steh voll auf dem Schlauch

Also im Intern-Modus startet es bei mir auch automatisch.

Wollte jetzt das Log posten.
Aber auf der Card-Server Info Seite wird das Log nicht mehr aktualisiert?
Das Live Log ist wohl nicht ganz Komplett

Spoiler

2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 8 value 71 time_us 13860
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 9 value 80 time_us 17878
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 10 value 1d time_us 18345
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 11 value ff time_us 18258
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 12 value dd time_us 18370
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 13 value 8d time_us 20219
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 14 value 7d time_us 18275
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 15 value 35 time_us 18290
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 16 value f5 time_us 18255
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 17 value 73 time_us 18327
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 18 value d3 time_us 18301
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 19 value b3 time_us 18302
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 20 value fb time_us 18278
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 21 value b5 time_us 18234
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 22 value 59 time_us 18000
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 23 value 91 time_us 18326
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 24 value 1d time_us 18320
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 25 value 3d time_us 18325
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 26 value 93 time_us 18303
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Flush readed byte
Nr 27 value 79 time_us 18297
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] Buffers readed 27
bytes total time_us 553949
2015/05/21 22:54:58 545870 r (reader) skysat [mouse] ATR Fsmax is 5
MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in
reader->mhz)
2015/05/21 22:54:59 545870 r (reader) skysat [mouse] Warning: Card
returned error on setting ifsd value to 251
2015/05/21 22:54:59 545870 r (reader) skysat [mouse] card system not
supported
2015/05/21 22:54:59 545870 r (reader) skysat [mouse] THIS WAS A FAILED
START ATTEMPT No 1 out of max alloted of 1
2015/05/21 22:54:59 545870 r (reader) skysat [mouse] card initializing
error
2015/05/21 22:55:00 0 s (main) init for all local cards done
2015/05/21 22:55:00 0 s (anticasc) anti cascading disabled

Danke Dir auf jeden Fall für deine Bemühungen