Freetz Image für FB 7330SL

kaese1032 · 8. November 2014

AW: Freetz Image für FB 7330SL

oscam hab ich installiert
wo kann ich sehen das easymouse erkannt wird
was brauche ich für das image noch wenn keine external dabei ist
kann ich den spoiler so übernehmen

nun wie folgt

2014/11/08 23:10:31 568D50 r skyv14 [mouse] card detected
2014/11/08 23:10:31 566F20 r hdplus [mouse] card detected
2014/11/08 23:10:32 566F20 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 00 50 31
2014/11/08 23:10:32 566F20 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/08 23:10:32 566F20 r hdplus [mouse] Setting baudrate to 39638 bps
2014/11/08 23:10:32 566F20 r hdplus [mouse] Calculated work ETU is 25.27 us reader mhz = 368
2014/11/08 23:10:32 566F20 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/08 23:10:32 568D50 r skyv14 [mouse] ATR: F8 00
2014/11/08 23:10:32 568D50 r skyv14 [mouse] ERROR: Could not read reader->convention
2014/11/08 23:10:32 568D50 r skyv14 [mouse] Error activating card.
2014/11/08 23:10:33 566F20 r hdplus [mouse] card system not supported
2014/11/08 23:10:33 566F20 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/08 23:10:34 568D50 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/11/08 23:10:34 568D50 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/08 23:10:34 568D50 r skyv14 [mouse] Setting baudrate to 39638 bps
2014/11/08 23:10:34 568D50 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
2014/11/08 23:10:34 566F20 r hdplus [mouse] ATR: F5 FE 0F 7D F2 AF 69 00 AD F5 F0 FF FF F5 73
2014/11/08 23:10:34 566F20 r hdplus [mouse] ERROR: Could not read reader->convention
2014/11/08 23:10:34 566F20 r hdplus [mouse] Error activating card.
2014/11/08 23:10:34 568D50 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/08 23:10:36 566F20 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/11/08 23:10:36 566F20 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/08 23:10:36 566F20 r hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2014/11/08 23:10:36 566F20 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/08 23:10:38 568D50 r skyv14 [mouse] card system not supported
2014/11/08 23:10:38 568D50 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/08 23:10:39 566F20 r hdplus [mouse] card system not supported
2014/11/08 23:10:39 566F20 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/08 23:10:39 566F20 r hdplus [mouse] card initializing error
2014/11/08 23:10:40 568D50 r skyv14 [mouse] ATR: FF B4 E7 37 5B BF F5 FE 0F 7D F2 AF
2014/11/08 23:10:40 568D50 r skyv14 [mouse] ERROR: Could not read reader->convention
2014/11/08 23:10:40 568D50 r skyv14 [mouse] Error activating card.
2014/11/08 23:10:41 568D50 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/11/08 23:10:41 568D50 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/08 23:10:41 568D50 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2014/11/08 23:10:41 568D50 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/08 23:10:45 568D50 r skyv14 [mouse] card system not supported
2014/11/08 23:10:45 568D50 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/08 23:10:45 568D50 r skyv14 [mouse] card initializing error

rolu2 · 8. November 2014

AW: Freetz Image für FB 7330SL

In dem Image ist alles drin. Eine external ist nur dabei,wenn wir Sachen ausgelagert haben beim Imagebau

Wie sind die Easymouse eingestellt? Siehe dazu hier die

Sie müssen registriert sein, um Links zu sehen.

Den Inhalt im Spoiler kannst du erstmal übernehmen.

Der rsakey und boxkey ist nicht vollständigt. Google hilft dir weiter den vollständigen einzutragen

kaese1032 · 8. November 2014

AW: Freetz Image für FB 7330SL

OK

easymouse ist so eingestellt rot und grün LED haben auch schon abwechselnd geblinkt

Problem mit dem rsakey finde nichts

Ist der spoiler so ok (siehe oben)

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

Die Karten werden nicht erkannt. Fang doch bitte mal erst mit der v14 an.

Treiber so einstellen

Du musst angemeldet sein, um Bilder zu sehen.

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

Hallo hab ich geändert

Live.log

2014/11/09 12:19:03 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
2014/11/09 12:19:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3071
2014/11/09 12:19:03 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/11/09 12:19:03 0 s [Emu] OSEmu (built-in) version 706
2014/11/09 12:19:03 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/09 12:19:03 0 s signal handling initialized
2014/11/09 12:19:03 0 s 159 service-id's loaded in 9 ms
2014/11/09 12:19:03 0 s 161 tier-id's loaded
2014/11/09 12:19:03 0 s 4 provid's loaded
2014/11/09 12:19:03 0 s cccam: initialized (fd=6, port=12000)
2014/11/09 12:19:03 0 s emulator [emu] creating thread for device emulator
2014/11/09 12:19:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/09 12:19:03 0 s waiting for local card init
2014/11/09 12:19:03 57FC00 h webif: decompressed 155240 bytes back into 367148 bytes
2014/11/09 12:19:03 57FC00 h HTTP Server running. ip=0.0.0.0 port=83
2014/11/09 12:19:03 55BB00 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/11/09 12:19:04 55BB00 r emulator [emu] card detected
2014/11/09 12:19:05 55BB00 r emulator [emu] found card system emu
2014/11/09 12:19:05 55BB00 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/09 12:19:06 0 s init for all local cards done
2014/11/09 12:19:06 0 s anti cascading disabled

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

In dem Log wird kein reader abgefragt. Poste nochmal deine oscam.server

Gesendet von meinem JY-G3 mit Tapatalk

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

Ok hier

oscam.server

[reader]
label = hdplus
enable = 1
protocol = easymouse
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = hdplus
smargopatch = 1
caid = 1830
rsakey =
boxkey =
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

[reader]
label = skyv14
protocol = easymouse
device = /dev/ttyUSB0
autospeed = 0
fallback = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D,8070540000011D
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 300
ndsversion = 2

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

Es gibt kein protocol = easymouse

Bitte mal so eintragen

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
#ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D,8070540000011D
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 300
ndsversion = 2

Edit. den HD+Reader komplett weg lassen erst mal

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

OK jetzt

2014/11/09 13:18:37 55BF00 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Card type: P1TV
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Rom version: 20AA
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Credit available on card: 0 euro
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Extended 4C detected
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] FuseByte: 25
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Region Code: 00BO0102
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Country Code: DEU
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] Pincode read:
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] PCB settings: FF FF FF FF
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] ready for requests
2014/11/09 13:18:38 55BF00 r skyv14 [mouse] found card system videoguard2
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] card detected
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: af1a, expiry date: 2014/09/30-01:01:00
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 2710, expiry date: 2014/02/09-00:01:00
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0065, expiry date: 2014/12/06-00:00:00 SKY
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0066, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0067, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0068, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 0069, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 006b, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 006f, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:38 55BF00 r skyv14 [videoguard2] tier: 007b, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 007d, expiry date: 2014/12/06-00:00:00 Sky
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 008e, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c0, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c7, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c8, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00c9, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00ca, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00cb, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00d4, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00f3, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00fa, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:39 55BF00 r skyv14 [videoguard2] tier: 00ff, expiry date: 2014/12/06-00:00:00
2014/11/09 13:18:44 0 s init for all local cards done
2014/11/09 13:18:44 0 s anti cascading disabled

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

Das sieht doch schon mal top aus,deine V14 wird gelesen. Jetzt weiter mit der HD+
dazu das in die oscam.server rein

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
rsakey = BF3****D5
boxkey = A7**7C
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

rsakey und boykey ersetzen und easymouse mit karte ran und oscam neu starten

Schau mal do wo du die oscam runtergeladen hast vom Image aus. Habe da einen neuen Ordner angelegt.

Sollte dir helfen

Edit: Hast du eine weisse oder schwarze HD+?

Der Readereintrag ist für eine Weisse

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

Hallo

2014/11/09 15:27:13 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
2014/11/09 15:27:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8623
2014/11/09 15:27:13 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/11/09 15:27:13 0 s [Emu] OSEmu (built-in) version 706
2014/11/09 15:27:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/09 15:27:13 0 s signal handling initialized
2014/11/09 15:27:13 0 s 159 service-id's loaded in 9 ms
2014/11/09 15:27:13 0 s 161 tier-id's loaded
2014/11/09 15:27:13 0 s 4 provid's loaded
2014/11/09 15:27:13 0 s cccam: initialized (fd=5, port=12000)
2014/11/09 15:27:13 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2014/11/09 15:27:13 0 s hdplus [mouse] creating thread for device /dev/ttyUSB1
2014/11/09 15:27:13 0 s emulator [emu] creating thread for device emulator
2014/11/09 15:27:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/09 15:27:13 0 s waiting for local card init
2014/11/09 15:27:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
2014/11/09 15:27:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1
2014/11/09 15:27:13 55C928 h webif: decompressed 155240 bytes back into 367148 bytes
2014/11/09 15:27:13 55C928 h HTTP Server running. ip=0.0.0.0 port=83
2014/11/09 15:27:13 568AF8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/11/09 15:27:13 564E98 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2014/11/09 15:27:14 568AF8 r emulator [emu] card detected
2014/11/09 15:27:14 564E98 r skyv14 [mouse] card detected
2014/11/09 15:27:15 568AF8 r emulator [emu] found card system emu
2014/11/09 15:27:15 568AF8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:27:15 564E98 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:27:15 564E98 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:27:15 564E98 r skyv14 [mouse] Setting baudrate to 39638 bps
2014/11/09 15:27:15 564E98 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
2014/11/09 15:27:15 564E98 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/09 15:27:16 564E98 r skyv14 [mouse] card system not supported
2014/11/09 15:27:16 564E98 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/09 15:27:18 564E98 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:27:18 564E98 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:27:18 564E98 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2014/11/09 15:27:18 564E98 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/09 15:27:19 564E98 r skyv14 [mouse] card system not supported
2014/11/09 15:27:19 564E98 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:27:19 564E98 r skyv14 [mouse] card initializing error
2014/11/09 15:28:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
2014/11/09 15:28:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1
2014/11/09 15:29:13 566CC8 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=19 No such device)
2014/11/09 15:29:13 566CC8 r hdplus [mouse] Cannot open device: /dev/ttyUSB1

Bei Status im Webif no data,error,unknown

wo meinst du neuen Ordner gefunden

unterseite ist weiß

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

Teste mal erst die HD+ einzelen

Oscam.server

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF3****D5
boxkey = A7**7C
ecmwhitelist = 92
detect = cd
mhz = 358
cardmhz = 358
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,2,2

Den v14 reader deaktivieren.Dazu überall eine # vor den Eintragen

Unter Neuste OSCamversionen sollst du auf Download OSCam-Binary klicken. Wenn du auf unseren oscamserver bist, wirdt du schon sehen was ich meine

Edit: Was steht auf der HD+ drauf H01 oder H02

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

2014/11/09 15:46:18 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
2014/11/09 15:46:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12321
2014/11/09 15:46:18 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/11/09 15:46:18 0 s [Emu] OSEmu (built-in) version 706
2014/11/09 15:46:18 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/09 15:46:18 0 s signal handling initialized
2014/11/09 15:46:18 0 s 159 service-id's loaded in 9 ms
2014/11/09 15:46:18 0 s 161 tier-id's loaded
2014/11/09 15:46:18 0 s 4 provid's loaded
2014/11/09 15:46:18 0 s cccam: initialized (fd=5, port=12000)
2014/11/09 15:46:18 0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/09 15:46:18 0 s emulator [emu] creating thread for device emulator
2014/11/09 15:46:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/09 15:46:18 0 s waiting for local card init
2014/11/09 15:46:18 559EF8 h webif: decompressed 155240 bytes back into 367148 bytes
2014/11/09 15:46:18 559EF8 h HTTP Server running. ip=0.0.0.0 port=83
2014/11/09 15:46:18 563FE8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/11/09 15:46:19 5621B8 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2014/11/09 15:46:19 563FE8 r emulator [emu] card detected
2014/11/09 15:46:19 5621B8 r hdplus [mouse] card detected
2014/11/09 15:46:20 563FE8 r emulator [emu] found card system emu
2014/11/09 15:46:20 563FE8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:46:21 5621B8 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:46:21 5621B8 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:46:21 5621B8 r hdplus [mouse] Setting baudrate to 38400 bps
2014/11/09 15:46:21 5621B8 r hdplus [mouse] Calculated work ETU is 25.98 us reader mhz = 358
2014/11/09 15:46:21 5621B8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2014/11/09 15:46:22 5621B8 r hdplus [mouse] card system not supported
2014/11/09 15:46:22 5621B8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/09 15:46:23 5621B8 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:46:23 5621B8 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:46:23 5621B8 r hdplus [mouse] Calculated work ETU is 103.91 us reader mhz = 358
2014/11/09 15:46:23 5621B8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2014/11/09 15:46:24 5621B8 r hdplus [mouse] card system not supported
2014/11/09 15:46:24 5621B8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:46:24 5621B8 r hdplus [mouse] card initializing error
2014/11/09 15:46:25 0 s init for all local cards done
2014/11/09 15:46:25 0 s anti cascading disabled

ich habe nur eine karte hd+ ist dazugebucht

den ordner habe ich gefunden:emoticon-0111-blush

rolu2 · 9. November 2014

AW: Freetz Image für FB 7330SL

Wenn du nur ein V14 hast und HD+ dazugebucht hast, brauchst du auch nur den Readereintrag für die v14.

Das hättest du ja schon mal viel früher sagen können

kaese1032 · 9. November 2014

AW: Freetz Image für FB 7330SL

wusst ich nicht

2014/11/09 15:55:57 0 s >> OSCam << cardserver started, version 1.20-emu, build r9982 (mips-linux-uclibc-libusb)
2014/11/09 15:55:57 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13969
2014/11/09 15:55:57 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/11/09 15:55:57 0 s [Emu] OSEmu (built-in) version 706
2014/11/09 15:55:57 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/09 15:55:57 0 s signal handling initialized
2014/11/09 15:55:57 0 s 159 service-id's loaded in 8 ms
2014/11/09 15:55:57 0 s 161 tier-id's loaded
2014/11/09 15:55:57 0 s 4 provid's loaded
2014/11/09 15:55:57 0 s cccam: initialized (fd=5, port=12000)
2014/11/09 15:55:57 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2014/11/09 15:55:57 0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/09 15:55:57 0 s emulator [emu] creating thread for device emulator
2014/11/09 15:55:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/09 15:55:57 0 s waiting for local card init
2014/11/09 15:55:57 568AF8 h webif: decompressed 155240 bytes back into 367148 bytes
2014/11/09 15:55:57 568AF8 h HTTP Server running. ip=0.0.0.0 port=83
2014/11/09 15:55:57 55C928 r skyv14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=22 Invalid argument)
2014/11/09 15:55:57 55C928 r skyv14 [mouse] Cannot open device: /dev/ttyUSB0
2014/11/09 15:55:57 566CC8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/11/09 15:55:57 564E98 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2014/11/09 15:55:58 566CC8 r emulator [emu] card detected
2014/11/09 15:55:58 564E98 r hdplus [mouse] card detected
2014/11/09 15:55:59 566CC8 r emulator [emu] found card system emu
2014/11/09 15:55:59 566CC8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:55:59 564E98 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0
2014/11/09 15:55:59 564E98 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:55:59 564E98 r hdplus [mouse] Setting baudrate to 38400 bps
2014/11/09 15:55:59 564E98 r hdplus [mouse] Calculated work ETU is 25.98 us reader mhz = 358
2014/11/09 15:55:59 564E98 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2014/11/09 15:56:00 564E98 r hdplus [mouse] card system not supported
2014/11/09 15:56:00 564E98 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/09 15:56:01 564E98 r hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:56:01 564E98 r hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:56:01 564E98 r hdplus [mouse] Calculated work ETU is 103.91 us reader mhz = 358
2014/11/09 15:56:01 564E98 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2014/11/09 15:56:02 564E98 r hdplus [mouse] card system not supported
2014/11/09 15:56:02 564E98 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:56:02 564E98 r hdplus [mouse] card initializing error
2014/11/09 15:56:57 55C928 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2014/11/09 15:56:58 55C928 r skyv14 [mouse] card detected
2014/11/09 15:57:00 55C928 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:57:00 55C928 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:57:00 55C928 r skyv14 [mouse] Setting baudrate to 39638 bps
2014/11/09 15:57:00 55C928 r skyv14 [mouse] Calculated work ETU is 25.27 us reader mhz = 368
2014/11/09 15:57:00 55C928 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/09 15:57:01 55C928 r skyv14 [mouse] card system not supported
2014/11/09 15:57:01 55C928 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/09 15:57:02 55C928 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A
2014/11/09 15:57:02 55C928 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/09 15:57:02 55C928 r skyv14 [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2014/11/09 15:57:03 55C928 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/11/09 15:57:04 55C928 r skyv14 [mouse] card system not supported
2014/11/09 15:57:04 55C928 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/09 15:57:04 55C928 r skyv14 [mouse] card initializing error
2014/11/09 15:57:04 0 s init for all local cards done
2014/11/09 15:57:04 0 s anti cascading disabled

Freetz Image für FB 7330SL

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

rolu2

kaese1032

Ist oft hier

Ähnliche Themen

Freetz Image für FB 7330SL

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz