Connection timed out

[leGun]

Hallo zusammen,
ich nutze bei mir zu Hause OSCam als Server und habe es meinem Vater nun als Client eingerichtet.
Leider scheint der Verbindungsaufbau nichz zu funktionieren.
So sehen die Logs aus:

Spoiler

2018/12/28 16:22:06 50291935 p   (reader) sky [cccam] connecting to mydyndns.ddns.net:1234
2018/12/28 16:22:09 50291935 p   (reader) sky [cccam] connect failed: Connection timed out
2018/12/28 16:22:09 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (3021 ms) by sky
2018/12/28 16:22:09 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (2273 ms) by sky
2018/12/28 16:22:09 2D5873C4 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/12/28 16:22:09 2D5873C4 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A77 ANY CHID PMTPID 006E VPID 0EFF
2018/12/28 16:22:09 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (1 ms) by sky
2018/12/28 16:22:09 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (0 ms) by sky
2018/12/28 16:22:09 2D5873C4 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/12/28 16:22:09 2D5873C4 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A77 ANY CHID PMTPID 006E VPID 0EFF
2018/12/28 16:22:10 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (0 ms) by sky
2018/12/28 16:22:10 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (0 ms) by sky
2018/12/28 16:22:10 2D5873C4 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/12/28 16:22:10 2D5873C4 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A77 ANY CHID PMTPID 006E VPID 0EFF
2018/12/28 16:22:11 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (1 ms) by sky
2018/12/28 16:22:11 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (0 ms) by sky
2018/12/28 16:22:11 2D5873C4 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/12/28 16:22:11 2D5873C4 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A77 ANY CHID PMTPID 006E VPID 0EFF
2018/12/28 16:22:11 2D5873C4 c      (ecm) anonymous (098C@000000/0B60/0088/9F:ZENSIERT): rejected  (1 ms) by sky
2018/12/28 16:22:12 50291935 p   (reader) sky [cccam] connecting to mydyndns.ddns.net:1234
2018/12/28 16:22:15 50291935 p   (reader) sky [cccam] connect failed: Connection timed out

Hat von euch jemand eine Idee woran es liegen kann?
Dyndns, Port, User und Passwort sind korrekt.
Von hier aus habe ich leider keinen Zugriff auf die Server-Logs.

Hat von euch jemand eine Idee woran es liegen kann?

Vielen Dank!

 

[axel]

Hi,

ohne Konfigs + Logs wird das Rumraterei leider.

Gruß

Gesendet von meinem Xiaomi POCOPHONE F1 mit Tapatalk

 

[ancofima]

Hi
es wäre sehr hilfreich wenn man die config dateien sehen könnte weil es mit grosser wahrscheinlichkeit ( in den meisten fällen ) da dran liegt,
von den log den du gepostet hast kann man nur sehen das er aus irgend einen grund nicht zu den
Server conected

 

[dodo83]

der Port ist natürlich auch offen?

 

[leGun]

Vom Client (sky läuft nicht)

Spoiler

]oscam.conf:

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
clienttimeout = 5000
fallbacktimeout = 2500
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
emmlogdir = /tmp/emmlog.log

[cache]

[cccam]
port = 12000

[dvbapi]
enabled = 1
au = 1
user = DVBApi
boxtype = dreambox

[webif]
httpport = 8888
httpUser = root
httpPwd =
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox

oscam.user:

Spoiler

[account]
user                          = schlafzimmeruser
pwd                           = schlafzimmerpw
group                         = 2

[account]
user = local
au = hd01
group = 1,2

oscma.server:

Spoiler

[reader]
label                         = hd01
description                   = hd01
protocol                      = internal
device                        = /dev/sci0
caid                          = 1830
boxkey                        = ...
rsakey                        = ...
detect                        = cd
mhz                           = 540
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,3,2,0
blockemm-unknown              = 1
blockemm-g                    = 1

[reader]
label                         = sky
protocol                      = cccam
device                        = mydsndns,1234
key                           = xxx
user                          = xxx
password                      = xxx
services                      = !hd01,sky
inactivitytimeout             = 30
caid                          = 098C
group                         = 2
cccversion                    = 2.3.0

Vom Server (sky läuft):

oscam.conf:

Spoiler

[global]
logfile                       = /etc/tuxbox/logs/oscam.log
nice                          = -1
maxlogsize                    = 1500
preferlocalcards              = 1
#usrfile                       = /etc/tuxbox/logs/oscamuser.log
#cwLogdir                      = /etc/tuxbox/logs/cw
emmlogdir                     = /etc/tuxbox/logs/emm
saveinithistory               = 1

[cache]

[monitor]
appendchaninfo = 1

[dvbapi]
enabled                       = 1
au                            = 1
delayer                       = 1
user                          = local
boxtype                       = dreambox

[webif]
httpport = 1234
httpuser = xxx
httppwd = xxx
httprefresh = 10
httpshoecminfo = 1
httpallowed = 127.0.0.1,1.1.1.1-255.255.255.255
aulow = 120
hideclient_to = 15

#[cccam]
#port = 6969

[newcamd]
port = 1234@098C:000000
key = xxx

]oscam.user:

Spoiler

[CODE
[account]
user = local
au = v14
group = 1

[account]
user = xxx
pwd = xxx
group = 1
cccmaxhops = 1
[/CODE]

oscam.server:

Spoiler

[reader]
label = v14
#enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
#boxid = ????????
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
#saveemm-s = 1
#saveemm-g = 1
ndsversion = 2

Hier mal ein paar Logs vom Client:

Spoiler

2018/12/31 16:51:30 0533FE2A p    (cccam) sky server returned 14 instead of 16 bytes as init seed (errno=0 Success)
2018/12/31 16:51:30 0533FE2A p   (reader) sky [cccam] proxy initialized, server mydyndns:1234
2018/12/31 16:51:31 6FF44F11 c   (dvbapi) Demuxer 0 restarting decodingrequests after 115471 ms with 1 enabled and 2 disabled ecmpids!
2018/12/31 16:51:31 6FF44F11 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A77 ANY CHID PMTPID 006E VPID 0EFF
2018/12/31 16:51:31 0533FE2A p   (reader) sky [cccam] connecting to my.ddns.net:1234
2018/12/31 16:51:32 6FF44F11 c      (ecm) anonymous (098C@000000/0B60/0088/9F:8E8EA0C176CD7188ED2AF9F8BF935A73): rejected group (1 ms) (no matching reader)
2018/12/31 16:51:32 6FF44F11 c      (ecm) anonymous (098C@000000/0B60/0088/9F:8E8EA0C176CD7188ED2AF9F8BF935A73): rejected group (1 ms) (no matching reader)
2018/12/31 16:51:36 6FF44F11 c      (ecm) anonymous (098C@000000/0B60/0088/9F:1E9DA7724DA9B1EF653EECB414079C25): timeout (5000 ms) by sky
2018/12/31 16:51:37 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:51:42 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:51:47 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:51:52 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:51:57 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:02 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:07 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:12 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:17 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:22 6FF44F11 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:23 6FF44F11 c   (dvbapi) Demuxer 0 stop descrambling program number 0088 (09C4@000000:0088 unknown)
2018/12/31 16:52:40 6FF44F11 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B89 PROVID: 000000
2018/12/31 16:52:40 6FF44F11 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 098C ECM_PID: 1A89 PROVID: 000000
2018/12/31 16:52:40 6FF44F11 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C89 PROVID: 000000
2018/12/31 16:52:40 6FF44F11 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 09AF ECM_PID: 1F89 PROVID: 000000

Und vom Server:

Spoiler

2018/12/31 16:50:32 1C895718 c        (-) -- Skipped 11 duplicated log lines --
2018/12/31 16:51:30 622ACA41 c        (-) -- Skipped 12 duplicated log lines --
2018/12/31 16:51:30 622ACA41 c   (client) anonymous disconnected from 11.22.33.44
2018/12/31 16:51:32 4F542AFF c  (newcamd) client connected to 1234 port
2018/12/31 16:51:32 1C895718 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/12/31 16:52:32 1C895718 c        (-) -- Skipped 11 duplicated log lines --
2018/12/31 16:53:32 4F542AFF c        (-) -- Skipped 12 duplicated log lines --

Erkennt ihr woran es liegen kann?

edti: port ist offen, anpingen der dyndns bringt auch die korrekte IP zurück.

 

[filius00]

Conf

[dvbapi]
enabled = 1
au = 1
user = DVBApi
boxtype = dreambox

User

[account]
user = local
au = hd01
group = 1,2

Die Bezeichnung nach "user" muss identisch sein.....

Auf dem Server fehlen in der "Conf" Protokoll und Port, oder läuft das über newcamd?
Dann würde aber der Proxy nicht passen.....

 

[leGun]

Läuft über Newcamd.
Was meinst du mit "dann passt der Proxy nicht"?

 

[filius00]

Der ist für das CCcam Protokoll erstellt......

....
[reader]
label = sky
protocol = cccam
.

Er versucht ja auch über CCcam zu verbinden.....

2018/12/31 16:51:31 0533FE2A p (reader) sky [cccam] connecting to verylightbluesky.ddns.net:6969
2018/12/31 16:51:32 6FF44F11 c (ecm) anonymous (098C)