7025 Smargo Sky it

[ludino]

Ci dispiace non so niente di più!


Ho un 7.025 con Smargo e 093 sky it che, solo che non può raggiungere la corsa!



Secondo cccam, mi dice


card reader /dev/sci0
handled 57(57) ecms and 8(8) emms
Caid 1702 Betacrypt ACS 900 GER
Cardserial xxxxxxxxxx (xxxxxx)
Chid 0276 - date 2010/02/02 valid 2010/05/23
Chid 05E7 - date 2010/02/02 valid 2010/05/23
Chid 05E8 - date 2010/02/02 valid 2010/05/23
Chid 7D27 - date 2010/02/02 valid 2010/05/23
Chid 7D23 - date 2010/02/02 valid 2010/05/23
Chid 000F - date 2010/02/02 valid 2010/05/23
Chid 05DE - date 2010/02/02 valid 2010/05/23
Chid 05DF - date 2010/02/02 valid 2010/05/23
Chid 04CE - date 2010/02/02 valid 2010/05/23
Chid 00F0 - date 2010/02/02 valid 2010/05/23
Chid 05DD - date 2010/02/02 valid 2010/05/23
Chid 0103 - date 2008/01/19 valid 2008/01/21
Chid 029C - date 2008/01/19 valid 2008/01/21
Chid 0104 - date 2008/01/19 valid 2008/01/21
Chid 0406 - date 2008/01/19 valid 2008/01/21
Chid 0105 - date 2008/01/19 valid 2008/01/21
Chid 0004 - date 2008/01/19 valid 2008/01/21


card reader /dev/sci1
no or unknown card inserted

Chiaramente egli non trova il lettore di smart, ma perché?
Ecco la mia configurazione:

###############################################
##### #####
### Config File Created by Cobra ###
### COBRA ###
##### COBRA #####
###############################################
#### Servers ####
##############################################################################################
#### Friends ####
#############################################################################################################################################
#### Config ####
###############################################
##############################################
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : xxxxxxxTELNETINFO USERNAME :root
TELNETINFO PASSWORD :xxxxx
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD : xxxxx
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
MINI OSD : no
# SERIAL READER: /dev/tts/0
# SMARTCARD CLOCK FREQUENCY: /dev/tts/0 3570000
# DISABLE EMM : no
# EXTRA EMM LEVEL : yes
#oscam
N: 192.168.178.20 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 [reader]Label = SkyItaliaProtocol =

[reader]
Label = SkyItalia
Protocol = mouse
#Detect = none
Device = /dev/usb/tts/0
group = 1
#mhz = 357
#mhz = 600
CAID = 093b
BoxID = xxxxx
savenano = all
Customspeed = 0
EMMCache = 1,3,2
Fallback = 0
#blockua = 0
#blockga = 0
#blocksa = 0
AU = 1

 

[rodd]

AW: 7025 Smargo Sky it

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

prova cosi per lo smargo

 

[ludino]

AW: 7025 Smargo Sky it

Dopo Cambiato le Dati e venuto Questo

card reader /dev/sci0
handled 12239(12236) ecms and 2611(2611) emms
Caid 1702 Betacrypt ACS 900 GER
Cardserial xxxxxxxxxx (xxxxxx)
Chid 0276 - date 2010/02/02 valid 2010/05/24
Chid 05E7 - date 2010/02/02 valid 2010/05/24
Chid 05E8 - date 2010/02/02 valid 2010/05/24
Chid 7D27 - date 2010/02/02 valid 2010/05/24
Chid 7D23 - date 2010/02/02 valid 2010/05/24
Chid 000F - date 2010/02/02 valid 2010/05/24
Chid 05DE - date 2010/02/02 valid 2010/05/24
Chid 05DF - date 2010/02/02 valid 2010/05/24
Chid 04CE - date 2010/02/02 valid 2010/05/24
Chid 00F0 - date 2010/02/02 valid 2010/05/24
Chid 05DD - date 2010/02/02 valid 2010/05/24
Chid 0103 - date 2008/01/19 valid 2008/01/21
Chid 029C - date 2008/01/19 valid 2008/01/21
Chid 0104 - date 2008/01/19 valid 2008/01/21
Chid 0406 - date 2008/01/19 valid 2008/01/21
Chid 0105 - date 2008/01/19 valid 2008/01/21
Chid 0004 - date 2008/01/19 valid 2008/01/21


card reader /dev/sci1
no or unknown card inserted

card reader /dev/tts/0
no or unknown card inserted

 

[seppel11]

AW: 7025 Smargo Sky it

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

come lai settato il smargo?

 

[AZK24]

AW: 7025 Smargo Sky it

ma dico io...sei pazzo a mettere il seriale della carta qui sul forum????
Cardserial xxxxxxxxxx (xxxxxx)
se non vuoi avere problemi ti consiglio di toglierlo subito!!!!!!!!!!!!!!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

 

[GianniBlaze]

AW: 7025 Smargo Sky it

Ma scusa...die tu vuoi fare partire la sky.it tramite Oscam/cccam nell smargo o no?

ma sti dati della cccam che ci ai postato a che ci servono?

Che versione Oscam ai messo?
Cosa dice il Log???

 

[ludino]

AW: 7025 Smargo Sky it

@ AZK24 le togli per favore anche nel poost die Seppel!
Alora il smargo lo ho messo a 6mhz fx dreambox e 0 0

Come lo vedo il log?

 

[ludino]

AW: 7025 Smargo Sky it

Non mi poi dari nessuno auito?

 

[Gelöschtes Mitglied 136430]

AW: 7025 Smargo Sky it

Ciao,

prima cosa di tutto. Se la Sky IT va tramite la Oscam, non ti fa vedere niente nella CCcam Info! Solo la Karta ke va solo con CCcam, nell tuo Caso SKY IT.

Nella CCcam.cfg sicuramente ai messo una volta una Line per la SKY DE ke sarebbe nell tuo caso /dev/sci0, e sicuramente anke una per /dev/sci1, questa la devi togliere dato ke SKY IT la fai funzionare con Oscam, e lo devi settare nella Oscam.server

Poi fai cosi, apri Telnet, connetiti nella Box, e poi metti il Smargo dentro, e nella Telnet scrivi dmesg, cosi ti dice qualle Port a preso, per esempio ttyUSB0

Ai visto se nella tua BOX ai attivato sotto "Kernel" anke il USB (FTDI)?

Vedi anke:

https://www.digital-eliteboard.com/threads/84266

 

[ludino]

AW: 7025 Smargo Sky it

Mi dispiace, ma non capisco niente pui, Io ho una 7025 con e2 gemine 4,6, e un Smargo fixed 6 mh Dreambox e 0,0! E la CCcam 2.1.4 Okay!

Ho fatto tutto come ere Scritto Qui!

Grazie a Sonic cosi ha funzionato! Allora ho fatto un nouvo Start del CCcam adesso non funziona Pui, e non so pui quelli dati devo meteri ho propio un blocco nella testa!

Alora per Prima ho Fato un nouvo Flasch nella Dreambox!
Poi ho fatto tutti Impostazioni! Come Lan, Tuner, USB FDTI
Poi ho scaricato del Blue Panel il CCcam 2.1.4 e la Oscam 0.9.9.4 svn 1851!
Poi ho scaricato il Cccam.cfg e le oscam-Config

Nel Telnet viene trovato il Smargo a tty0

Poi ho cambiato la CCcam.cfg

Cosi

###############################################
##### #####
### Config File Created by Cobra ###
### COBRA ###
##### COBRA #####
###############################################
#### Servers ####
###############################################
###############################################
#### Friends ####
###############################################
###############################################
###############################################
#### Config ####
###############################################
##############################################
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD :
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
MINI OSD : no
# SERIAL READER: /dev/tts/0
# SMARTCARD CLOCK FREQUENCY: /dev/tts/0 3570000
# DISABLE EMM : no
# EXTRA EMM LEVEL : yes
#oscam
N: 192.168.178.20 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

La oscam.conf

[global]
LogFile = stdout
nice = -1
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 1
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000

oscam.server

[reader]
Label = SkyItalia
Protocol = mouse
#Detect = none
Device = /dev/usb/tts/0
group = 1
mhz = 357
CAID = 093b
BoxID =
#savenano = all
Customspeed = 0
EMMCache = 1,3,2
Fallback = 0
#blockua = 0
#blockga = 0
#blocksa = 0
AU = 1

e oscam.user

[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0

poi ho messo la cccam.cfg Nel Var/etc
e le oscam nel var/tuxbox/config

pero non funtziona pui che mi dimentico?

Il log mi dice


root@dm7025:~# dmesg
NET: Registered protocol family 17
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:14.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE
S CCS
usb 1-1: new full speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:14.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE
S CCS
usb 1-1: ep0 maxpacket = 8
usb 1-1: skipped 3 descriptors after interface
usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usb 1-1: default language 0x0409
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
VFS: Mounted root (jffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 140k freed
Warning: unable to open an initial console.
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Registering unionfs 1.1.5
loop: loaded (max 8 devices)
Algorithmics/MIPS FPU Emulator v1.5
stb_core: module license 'Proprietary' taints kernel.
read CA...
CA dump:
01 01 03
02 01 00
03 04 00 00 81 cc
04 06 00 09 34 1b f5 24
09 02 01 01
06 08 32 30 30 37 31 32 31 38
07 0f 37 43 31 38 30 33 30 30 30 30 33 33 32 32 38
08 01 01
ff 01 f9
read DCA...dCA: not existent
error
lcd.o: LCD driver (KS0713) module
OLED detected.
scale_brightness: 12
4016156 ms:
161 ms: 31 Starting /etc/rcS.d/S00bootup...
141 ms: 4
319 ms: 12
230 ms: 16
788 ms: 18
213 ms: 20
73 ms: 22
149 ms: 24
99 ms: 28
69 ms: 32
120 ms: 34
no bootloader defined videomode found, using PAL...
SYNC: old: 0 -> new: 1 (requested: 3)
SYNC: old: 0 -> new: 1 (requested: 3)
audio_j1_streamtype_set(0)
init ALSA!
stv6412 detected!
avs: attaching avs at 0x94 to adapter xilleon
no bootloader defined videomode found, using CVBS...
set fb to 2(0)
set input to 0
set sb to 3(2)
set fb to 2(0)
avs already attached!
tsmux write 20
tsmux write 20
tsmux write 20
card init
autodetecting NIMs...
CI removed...
Found: Slot A, addr 42, ID: 04 (by CA)
Resetting Slot A
Found: Slot B, addr 42, ID: 04 (by CA)
Resetting Slot B
DVB: registering new adapter (xilleon).
DVB: registering frontend 0 (ST STV0299 DVB-S)...
DVB: registering frontend 0 (ST STV0299 DVB-S)...
1921 ms: 44
294 ms: 50
173 ms: 54
81 ms: 62
40 ms: 66
39 ms: 70
VIDEO_CLEAR_BUFFER, c01d48e0, c01d6ec0
MPEG: Sequence header!
set sb to 3(2)
set new stc
xilleon_audio_j1_stc_discontinuity
311 ms: 78
state is idle, denying.
70 ms: 82
6267 ms: 86
38 ms: 90
144 ms: 94
196 ms: =s
13673 ms: 37 Starting /etc/rcS.d/S03udev...
143 ms: =s
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
4083 ms: 43 Starting /etc/rcS.d/S40networking...
142 ms: =s
19033 ms: 49 Starting /etc/rcS.d/S98configure...
VIDEO_CLEAR_BUFFER, c01d48e0, c01d6ec0
MPEG: Sequence header!
set sb to 3(2)
set new stc
xilleon_audio_j1_stc_discontinuity
state is idle, denying.
tsmux write 20
tsmux write 20
tsmux write 20
set fb to 2(1)
set sb to 3(2)
set sb to 3(2)
set input to 0
set sb to 3(2)
set fb to 2(1)
scale_brightness: 2
scale_brightness: 7
wakeup_flags 10
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbserial_generic 1-1:1.0: usb_probe_interface
usbserial_generic 1-1:1.0: usb_probe_interface - got id
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infr
ared Tranceiver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electron
ics TIRA-1 IR Transceiver
ftdi_sio 1-1:1.0: usb_probe_interface
ftdi_sio 1-1:1.0: usb_probe_interface - got id
ftdi_sio 1-1:1.0: FTDI FT232BM Compatible converter detected
usb 1-1: FTDI FT232BM Compatible converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.2:USB FTDI Serial Converters Driver
tuner freq is 1470500
symbolrate is 27500000
inversion is OFF
clock pulling from pipe 0![pid_pcr_set] new filter for pcr (pid:02ff, pipe:0)
SYNC: old: 1 -> new: 0 (requested: 3)
SYNC: old: 1 -> new: 0 (requested: 3)
[pid_pcr_set] new filter for pcr (pid:02ff, pipe:0)
[xilleon_pcr_check_pid] nothing changed
audio_j1_streamtype_set(2)
[pid_pcr_set] same as video
[xilleon_pcr_check_pid] we have to use now an different index
SYNC: old: 0 -> new: 1 (requested: 3)
pcr extracted on pipe0, unit0!
SYNC: old: 1 -> new: 3 (requested: 3)
SYNC: old: 0 -> new: 3 (requested: 3)
PCR is soo far away that we cannot recover with clock pulling.
pcr disable (0:0)
SYNC: old: 3 -> new: 1 (requested: 3)
SYNC: old: 3 -> new: 1 (requested: 3)
state is idle, denying.
tuner freq is 1431500
symbolrate is 27500000
inversion is OFF
clock pulling from pipe 0![pid_pcr_set] new filter for pcr (pid:0bff, pipe:0)
SYNC: old: 1 -> new: 0 (requested: 3)
SYNC: old: 1 -> new: 0 (requested: 3)
[pid_pcr_set] new filter for pcr (pid:0bff, pipe:0)
[xilleon_pcr_check_pid] nothing changed
audio_j1_streamtype_set(2)
[pid_pcr_set] same as video
[xilleon_pcr_check_pid] we have to use now an different index
SYNC: old: 0 -> new: 1 (requested: 3)
pcr extracted on pipe0, unit0!
SYNC: old: 1 -> new: 3 (requested: 3)
SYNC: old: 0 -> new: 3 (requested: 3)
PCR is soo far away that we cannot recover with clock pulling.
[AUDIO] enable sync
MPEG: Sequence header!
set sb to 3(2)
SYNC: old: 3 -> new: 2 (requested: 2)
pcr disable (0:0)
SYNC: old: 2 -> new: 1 (requested: 2)
SYNC: old: 3 -> new: 1 (requested: 3)
state is idle, denying.
tuner freq is 1158500
symbolrate is 27500000
inversion is OFF
clock pulling from pipe 0![pid_pcr_set] new filter for pcr (pid:09ff, pipe:0)
SYNC: old: 1 -> new: 0 (requested: 2)
SYNC: old: 1 -> new: 0 (requested: 3)
[pid_pcr_set] new filter for pcr (pid:09ff, pipe:0)
[xilleon_pcr_check_pid] nothing changed
audio_j1_streamtype_set(2)
[pid_pcr_set] same as video
[xilleon_pcr_check_pid] we have to use now an different index
SYNC: old: 0 -> new: 1 (requested: 3)
pcr extracted on pipe0, unit0!
SYNC: old: 1 -> new: 3 (requested: 3)
SYNC: old: 0 -> new: 3 (requested: 3)
PCR is soo far away that we cannot recover with clock pulling.
[AUDIO] enable sync
MPEG: Sequence header!
set sb to 3(2)
SYNC: old: 3 -> new: 2 (requested: 2)
CA: freeing PID 09ff on demux 0 (1 users)
CA: freeing PID 0020 on demux 0 (1 users)
CA: freeing PID 0a00 on demux 0 (1 users)
CA: freeing PID 09ff on demux 2 (1 users)
CA: freeing PID 0020 on demux 2 (1 users)
CA: freeing PID 0a00 on demux 2 (1 users)
CA: freeing PID 09ff on demux 0 (1 users)
CA: freeing PID 0020 on demux 0 (1 users)
CA: freeing PID 0a00 on demux 0 (1 users)
CA: freeing PID 09ff on demux 2 (1 users)
CA: freeing PID 0020 on demux 2 (1 users)
CA: freeing PID 0a00 on demux 2 (1 users)
CA: freeing PID 09ff on demux 0 (1 users)
CA: freeing PID 0020 on demux 0 (1 users)
CA: freeing PID 0a00 on demux 0 (1 users)
CA: freeing PID 09ff on demux 2 (1 users)
CA: freeing PID 0020 on demux 2 (1 users)
CA: freeing PID 0a00 on demux 2 (1 users)
usb 1-1: oscam_0.99.4 timed out on ep0in len=1/2
usb 1-1: oscam_0.99.4 timed out on ep0in len=1/2
usb 1-1: oscam_0.99.4 timed out on ep0in len=1/2
root@dm7025:~#

Prego per aiuto!

 

[Gelöschtes Mitglied 136430]

AW: 7025 Smargo Sky it

Prendi per favore le mie Config e riprova dinuovo.

Se dmesg ti dice ttyUSB0, allora metti

Device = /dev/ttyUSB0