yavdr 0.5 / oscam / vdr-sc-plugin / kbw / kein Bild

[BMW0208]

Hallo zusammen,

ich bin relativ neu in der Thematik, habe mich im Internet eingelesen und nun folgendes Problem:

Setup:
- HTPC mit yavdr 0.5
- Reader easymouse2
- KabelBW V23
- oscam 1.20
- vdr-sc-plugin
- newcamd

im VDR bekomme ich kein Bild (schwarz) bei den HD-Kanälen der Privaten Sender (RTL HD etc.)

So sieht das oscam log aus:

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Mon Dec 10 17:33:43 2012
-------------------------------------------------------------------------------
2012/12/10 17:33:43 0 s starting thread log_list_thread
2012/12/10 17:33:43 0 s log_list_thread thread started
2012/12/10 17:33:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7819 (x86_64-linux-gnu)
2012/12/10 17:33:43 0 s version=1.20-unstable_svn, build #7819, system=x86_64-linux-gnu
2012/12/10 17:33:43 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/12/10 17:33:43 0 s max. logsize=unlimited, loghistorysize=4096 bytes
2012/12/10 17:33:43 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/12/10 17:33:43 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/12/10 17:33:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/12/10 17:33:43 0 s signal handling initialized (type=sysv)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s monitor: initialized (fd=5, port=988)
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s camd35: disabled
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s cs378x: disabled
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s newcamd: initialized (fd=6, port=34002, ip=127.0.0.1, crypted)
2012/12/10 17:33:43 0 s -> CAID: 098E PROVID: 000000
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s pandora: disabled
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s csp: disabled
2012/12/10 17:33:43 0 s Starting listener 0
2012/12/10 17:33:43 0 s radegast: disabled
2012/12/10 17:33:43 0 s starting thread http
2012/12/10 17:33:43 0 s http thread started
2012/12/10 17:33:43 0 s starting thread reader check
2012/12/10 17:33:43 0 s reader check thread started
2012/12/10 17:33:43 0 s starting thread check
2012/12/10 17:33:43 0 s check thread started
2012/12/10 17:33:43 0 s easymouse2 [mouse] creating thread for device /dev/ttyUSB0
2012/12/10 17:33:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/12/10 17:33:43 0 s waiting for local card init
2012/12/10 17:33:43 3C0008C0 h HTTP Server listening on port 8888
2012/12/10 17:33:43 CFC390 r easymouse2 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2012/12/10 17:33:43 CFC390 r easymouse2 [mouse] Cannot open device: /dev/ttyUSB0
2012/12/10 17:34:43 CFC390 r easymouse2 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2012/12/10 17:34:43 CFC390 r easymouse2 [mouse] Cannot open device: /dev/ttyUSB0
2012/12/10 17:35:13 0 s init for all local cards done
2012/12/10 17:35:13 0 s anti cascading disabled
2012/12/10 17:35:18 3C0008C0 h easymouse2 [mouse] Restarting reader
2012/12/10 17:35:18 3C0008C0 h easymouse2 [mouse] creating thread for device /dev/ttyUSB0
2012/12/10 17:35:20 24000E10 r easymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=359, cardmhz=359)
2012/12/10 17:35:21 24000E10 r easymouse2 [mouse] card detected
2012/12/10 17:35:25 24000E10 r easymouse2 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
2012/12/10 17:35:26 24000E10 r easymouse2 [mouse] Setting baudrate to 77204 bps
2012/12/10 17:35:26 24000E10 r easymouse2 [mouse] Calculated work ETU is 12.95 us
2012/12/10 17:35:27 24000E10 r easymouse2 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.59 Mhz (specified in reader->mhz)
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] Card type: KWTV
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] Rom version: 10T1
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] parental lock setting: FF FF FF FF
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] type: VideoGuard Kabel BW (098E), caid: 098E
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] ready for requests
2012/12/10 17:35:28 24000E10 r easymouse2 [mouse] found card system videoguard2
2012/12/10 17:35:28 24000E10 r easymouse2 [videoguard2] card detected
2012/12/10 17:35:28 24000E10 r easymouse2 [videoguard2] type: VideoGuard Kabel BW (098E)
2012/12/10 17:35:28 24000E10 r easymouse2 [videoguard2] tier: 0025, expiry date: 2013/01/18-00:00:00
2012/12/10 17:35:28 24000E10 r easymouse2 [videoguard2] tier: 00f3, expiry date: 2013/01/18-00:00:00
2012/12/10 17:35:28 24000E10 r easymouse2 [videoguard2] tier: 00ff, expiry date: 2013/01/18-00:00:00
2012/12/10 17:35:46 CFC2F0 c client connected to 34002 port
2012/12/10 17:35:46 CFC2F0 c encrypted newcamd:34002-client 127.0.0.1 granted (vdr, au=on (1 reader))
2012/12/10 17:35:46 CFC2F0 c user vdr authenticated successfully (generic)
2012/12/10 17:35:46 CFC2F0 c AU enabled for user vdr on reader easymouse2
2012/12/10 17:35:52 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=135, idx=0, cnt=1: written (84 ms)
2012/12/10 17:35:52 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=49, idx=1, cnt=1: written (94 ms)
2012/12/10 17:36:02 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=41, idx=2, cnt=1: written (35 ms)
2012/12/10 17:36:13 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=38, idx=3, cnt=1: written (35 ms)
2012/12/10 17:36:22 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=40, idx=4, cnt=1: written (33 ms)
2012/12/10 17:36:32 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=45, idx=5, cnt=1: written (38 ms)
2012/12/10 17:36:43 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=39, idx=6, cnt=1: written (35 ms)
2012/12/10 17:36:53 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=39, idx=7, cnt=1: written (34 ms)
2012/12/10 17:37:02 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=36, idx=8, cnt=1: written (33 ms)
2012/12/10 17:37:13 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=45, idx=9, cnt=1: written (38 ms)
2012/12/10 17:37:22 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=36, idx=10, cnt=1: written (33 ms)
2012/12/10 17:37:32 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=36, idx=11, cnt=1: written (34 ms)
2012/12/10 17:37:43 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=37, idx=12, cnt=1: written (31 ms)
2012/12/10 17:37:53 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=48, idx=13, cnt=1: written (40 ms)
2012/12/10 17:38:03 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=43, idx=14, cnt=1: written (38 ms)
2012/12/10 17:38:13 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=36, idx=15, cnt=1: written (33 ms)
2012/12/10 17:38:23 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=49, idx=16, cnt=1: written (41 ms)
2012/12/10 17:38:32 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=37, idx=17, cnt=1: written (33 ms)
2012/12/10 17:38:42 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=40, idx=21, cnt=1: written (35 ms)
2012/12/10 17:38:53 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=49, idx=22, cnt=1: written (40 ms)
2012/12/10 17:39:02 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=47, idx=23, cnt=1: written (37 ms)
2012/12/10 17:39:12 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=46, idx=24, cnt=1: written (39 ms)
2012/12/10 17:39:23 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=47, idx=25, cnt=1: written (39 ms)
2012/12/10 17:39:33 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=38, idx=26, cnt=1: written (34 ms)
2012/12/10 17:39:42 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=44, idx=27, cnt=1: written (38 ms)
2012/12/10 17:39:53 24000E10 r easymouse2 [videoguard2] vdr emmtype=global, len=42, idx=28, cnt=1: written (36 ms)
2012/12/10 19:05:38 0 s log_list_thread thread started

Kann mir eventuell jemand schon über das .log sagen, wo ich weiter nach dem Fehler suchen sollte oder soll ich weitere config-files zur Problembeschreibung einstellen?

Danke erstmal für die Hilfe.

 

[NeroZ]

AW: yavdr 0.5 / oscam / vdr-sc-plugin / kbw / kein Bild

moin,

die configs wären nicht schlecht.
geht der log noch weiter, oder ist das alles ?
aber mal so ein tip ins blaue:
bei oscam.server und oscam.user
die services raus nehmen
#services = xxxx

 

[BMW0208]

AW: yavdr 0.5 / oscam / vdr-sc-plugin / kbw / kein Bild

Hier mal die weiteren Configs

oscam.conf

Spoiler

[global]logfile = /var/log/oscam.log
maxlogsize = 0


[newcamd]
port = 34002@098E:000000
serverip = 127.0.0.1
allowed = 127.0.0.1,0.0.0.0-255.255.255.255
key = 0102030405060708091011121314
keepalive = 1


[monitor]
port = 988
nocrypt = 127.0.0.1
monlevel = 1


[webif]
httpport = 8888
httpuser = timo
httppwd = xbmc
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

Spoiler

[reader]label = easymouse2
protocol = mouse
device = /dev/ttyUSB0
services = kabelbw,!kabelbw,kabelbw_hd,!kabelbw_hd
boxid = 12345678
detect = cd
mhz = 359
cardmhz = 359
group = 1
emmcache = 1,3,2

oscam.services

Spoiler

[kabelbw]caid = 098E
provid = 000000
srvid = D042,CF76,CF77,CF7E,C3BA,C60F,C610,C613,C615,C616,C617,C618,C619,D099,C3B6,C3B7,C3B9,C3BC,C3BD,5774,C3BF,D035,D036,D16C


[kabelbw_hd]
caid = 098E
provid = 000000
srvid = 5666,56B0,567D,56D7,55F8,5624,5756,5697,56C5,56EC,56C4,56C3,567C,567F,EF74,EF75,EF76,567E,EF77,56D8,5639

oscam.user

Spoiler

[account]user = vdr
pwd = local
uniq = 1
au = easymouse2
group = 1
services = kabelbw,!kabelbw,kabelbw_hd,!kabelbw_hd

cardclient.conf

Spoiler

newcamd:127.0.0.1:34002:1/098E:vdr:local:0102030405060708091011121314

any idea?

Danke

 

[BMW0208]

AW: yavdr 0.5 / oscam / vdr-sc-plugin / kbw / kein Bild

Danke NeroZ, der Tip mit den Services war goldrichtig.

jetzt läufts :emoticon-0103-cool:

 

[Oretuni]

AW: yavdr 0.5 / oscam / vdr-sc-plugin / kbw / kein Bild

Hallo,

ich hoffe hier liest noch jemand mit.
Ist es denn möglich mit entsprechendem Abo über Kabel die HD-Kanäle von Pro7/Sat1 ohne Hardware vom Kabelanbieter zu sehen?
Ich hab jetzt schon viel gelesen und dachte es geht nicht. Allerdings macht mich dieser Beitrag jetzt stutzig.
Oder ist das nur bei KabelBW so und bei mir Unitymedia geht es nicht.

Danke und Gruß