Vserver mit mouse und v14 wird nicht erkannt

Crow86 · 11. September 2015

Hallo
Ich habe hier einen folgendes problem meiner meinung nach wird die v14 nicht erkannt sie ist neu und war noch in keinem anderen gerät.
hier die log

2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 17 value fe time_us 4
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 18 value 8c time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 19 value fe time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 20 value 7e time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 21 value fe time_us 3922
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 22 value 62 time_us 5
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 23 value fe time_us 4
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 24 value 00 time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 25 value 72 time_us 3932
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 26 value f2 time_us 6
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 27 value b2 time_us 4
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 28 value 80 time_us 3423
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 29 value fe time_us 6
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 30 value fe time_us 3958
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 31 value b2 time_us 5
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 32 value 8e time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 33 value fc time_us 3946
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 34 value fe time_us 6
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 35 value fc time_us 3
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Buffers readed 35 bytes total time_us 146031
2015/09/11 18:18:20 344E2958 r (reader) v14 [mouse] Reader initialized (device=/dev/sky, detect=cd, mhz=600, cardmhz=369)
2015/09/11 18:18:21 344E2958 r (reader) v14 [mouse] card detected
2015/09/11 18:18:21 344E2958 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75141
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] ATR: 01 00
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] ERROR: Could not read reader->convention
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] Error activating card.
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75141
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] ERROR: Could not read reader->convention
2015/09/11 18:18:22 344E2958 r (reader) v14 [mouse] Error activating card.
2015/09/11 18:18:23 344E2958 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75143
2015/09/11 18:18:23 344E2958 r (reader) v14 [mouse] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/11 18:18:23 344E2958 r (reader) v14 [mouse] ERROR: Could not read reader->convention
2015/09/11 18:18:23 344E2958 r (reader) v14 [mouse] Error activating card.
2015/09/11 18:18:24 344E2958 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/09/11 18:18:24 344E2958 r (reader) v14 [mouse] card initializing error
2015/09/11 18:18:24 00000000 s (main) init for all local cards done
2015/09/11 18:18:24 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2015/09/11 18:18:24 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2015/09/11 18:18:24 00000000 s (anticasc) anti cascading disabled

.server

[reader]
label = v14
protocol = mouse
device = /dev/sky
services = !skyhdplus
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

wenn ihr mehr daten braucht melden...
hoffe ihr habt eine idee

Hunchback1000 · 11. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

stehen die Nippel der Maus auf 5V, PHOENIX, HOCH, 6 MHz ????

Crow86 · 11. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

ok conf auf 357 geändert wie bei der mouse eingestellt hier die neue log

2015/09/11 19:04:04 344E2958 r (reader) v14 [mouse] ERROR: not ready to write, timeout=0 ms
2015/09/11 19:04:04 344E2958 r (reader) v14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=364 us
2015/09/11 19:04:04 344E2958 r (reader) v14 [mouse] card system not supported
2015/09/11 19:04:04 344E2958 r (reader) v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2015/09/11 19:04:04 344E2958 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75141
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 1 value f5 time_us 3958
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 2 value f0 time_us 7
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 3 value ff time_us 3953
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 4 value ff time_us 6
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 5 value f5 time_us 3
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 6 value 73 time_us 3966
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 7 value 3f time_us 6
2015/09/11 19:04:06 344E2958 r (reader) v14 [mouse] Buffers readed 7 bytes total time_us 87150
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 1 value 00 time_us 3262
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 2 value ad time_us 7
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 3 value f5 time_us 3993
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 4 value f0 time_us 8
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 5 value ff time_us 14
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 6 value ff time_us 3883
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 7 value f5 time_us 6
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 8 value 73 time_us 3963
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Flush readed byte Nr 9 value 3f time_us 6
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] Buffers readed 9 bytes total time_us 90451
2015/09/11 19:04:07 344E2958 r (reader) v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] ERROR: not ready to write, timeout=1 ms
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1458 us
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] ERROR: not ready to write, timeout=1 ms
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1458 us
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] card system not supported
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/09/11 19:04:08 344E2958 r (reader) v14 [mouse] card initializing error
2015/09/11 19:04:09 00000000 s (main) init for all local cards done
2015/09/11 19:04:09 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2015/09/11 19:04:09 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2015/09/11 19:04:09 00000000 s (anticasc) anti cascading disabled

Hunchback1000 · 11. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

stell die nippel so wie ich sagte und nimm die configs aus deinem ersten post.

MfG

4gx35 · 11. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

server fehler, verwende die v14 erst einmal in einem receiver
du hast doch einen receiver mit oscam (möglichkeit) ?

es macht doch wenig sinn, eine v14 auf dem server zu verwenden,
wenn sie noch nicht aktiviert ist, dann muss man client und server configs beachten,
mach oscam auf den receiver, easy configs für receiver v14 bei meiner signatur unten

Crow86 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

Ok
Also ich habe jetzt meine Vu+ solo2 mit oscam bestückt mit der obigen conf.

2015/09/12 11:57:20 0 s waiting for local card init
2015/09/12 11:57:20 776005A8 r v14unten [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/09/12 11:57:20 543C60 r v14oben [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/09/12 11:57:20 776024A0 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/09/12 11:57:21 541E28 h webif: decompressed 157215 bytes back into 372672 bytes
2015/09/12 11:57:21 541E28 h HTTP Server running. ip=0.0.0.0 port=17000
2015/09/12 11:57:21 776005A8 r v14unten [internal] card detected
2015/09/12 11:57:21 776024A0 r emulator [emu] card detected
2015/09/12 11:57:22 776005A8 r v14unten [internal] using sh4 or old reset
2015/09/12 11:57:22 776005A8 r v14unten [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/12 11:57:22 776005A8 r v14unten [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/09/12 11:57:22 776005A8 r v14unten [internal] TEST tempo mhz check = 500 mhz
2015/09/12 11:57:22 776005A8 r v14unten [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/09/12 11:57:22 776024A0 r emulator [emu] found card system emu
2015/09/12 11:57:22 776024A0 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/12 11:57:24 776005A8 r v14unten [internal] Sended reader settings T=0 fs=6 ETU=23 WWT=230400 CWT=0 BWT=0 EGT=2 clock=0 check=0 P=5 I=50 U=0
2015/09/12 11:57:24 776005A8 r v14unten [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/09/12 11:57:25 776005A8 r v14unten [internal] Card type: P1TV
2015/09/12 11:57:25 776005A8 r v14unten [internal] Rom version: 20AA
2015/09/12 11:57:25 776005A8 r v14unten [internal] Credit available on card: 0 euro
2015/09/12 11:57:25 776005A8 r v14unten [internal] Extended 4C detected
2015/09/12 11:57:25 776005A8 r v14unten [internal] FuseByte: 00
2015/09/12 11:57:25 776005A8 r v14unten [internal] Region Code:
2015/09/12 11:57:25 776005A8 r v14unten [internal] Country Code: DEU
2015/09/12 11:57:26 776005A8 r v14unten [internal] Pincode read: 9365
2015/09/12 11:57:26 776005A8 r v14unten [internal] PCB settings: FF FF FF FF
2015/09/12 11:57:26 776005A8 r v14unten [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/09/12 11:57:26 776005A8 r v14unten [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/09/12 11:57:26 776005A8 r v14unten [internal] ready for requests
2015/09/12 11:57:26 776005A8 r v14unten [internal] found card system videoguard2
2015/09/12 11:57:26 776005A8 r v14unten [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/12 11:57:26 776005A8 r v14unten [videoguard2] card detected
2015/09/12 11:57:26 776005A8 r v14unten [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/09/12 11:57:28 0 s init for all local cards done
2015/09/12 11:57:28 0 s anti cascading disabled
2015/09/12 11:57:28 77605410 c plain dvbapi-client granted (serverbox, au=auto (3 reader))
2015/09/12 11:57:28 77605410 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/12 11:57:30 77605410 c Found 0 ECMpids and 9 STREAMpids in PMT
2015/09/12 11:57:30 77605410 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000 pmtpid 13EC
2015/09/12 11:57:30 77605410 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]

4gx35 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

welche oscam version ? warum 3 reader (lt. log) , emu reader deaktivieren per oscam webif - readers vorn anklicken

status cardok, no entitlements ?
jetzt auf entitl. klicken (oder unter readers auf das kleine i symbol)
dann sollte rechts payload 0f 06 stehen, die ziffern darunter posten

Crow86 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

hab ich soweit geändert neustart aber da steht nichts von payload

4gx35 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

du hast auch die frage zur oscam version und zum status nicht beantwortet,
was steht im log bei deinem dvbapi client denn jetzt ?

vorher: 2015/09/12 11:57:28 77605410 c plain dvbapi-client granted (serverbox, au=auto (3 reader))

oder hast du den reader oben auch noch nicht deaktiviert ? sehe ich gerade

Crow86 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

den emu bekomm ich nicht raus komischerweise....

OSCam r9986

2015/09/12 12:45:54 0 s emulator [emu] creating thread for device emulator
2015/09/12 12:45:54 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/09/12 12:45:54 0 s waiting for local card init
2015/09/12 12:45:54 77712AF0 r v14oben [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2015/09/12 12:45:54 77714928 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/09/12 12:45:54 5322D0 h webif: decompressed 157215 bytes back into 372672 bytes
2015/09/12 12:45:54 5322D0 h HTTP Server running. ip=0.0.0.0 port=17000
2015/09/12 12:45:55 77712AF0 r v14oben [internal] card detected
2015/09/12 12:45:55 77714928 r emulator [emu] card detected
2015/09/12 12:45:55 77712AF0 r v14oben [internal] using sh4 or old reset
2015/09/12 12:45:56 77712AF0 r v14oben [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/12 12:45:56 77712AF0 r v14oben [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/09/12 12:45:56 77712AF0 r v14oben [internal] TEST tempo mhz check = 500 mhz
2015/09/12 12:45:56 77712AF0 r v14oben [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/09/12 12:45:56 77714928 r emulator [emu] found card system emu
2015/09/12 12:45:56 77714928 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/12 12:45:58 77712AF0 r v14oben [internal] Sended reader settings T=0 fs=6 ETU=23 WWT=230400 CWT=0 BWT=0 EGT=2 clock=0 check=0 P=5 I=50 U=0
2015/09/12 12:45:58 77712AF0 r v14oben [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Card type: P1TV
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Rom version: 20AA
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Credit available on card: 0 euro
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Extended 4C detected
2015/09/12 12:45:59 77712AF0 r v14oben [internal] FuseByte: 00
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Region Code:
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Country Code: DEU
2015/09/12 12:45:59 77712AF0 r v14oben [internal] Pincode read: 9365
2015/09/12 12:45:59 77712AF0 r v14oben [internal] PCB settings: FF FF FF FF
2015/09/12 12:45:59 77712AF0 r v14oben [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/09/12 12:45:59 77712AF0 r v14oben [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/09/12 12:45:59 77712AF0 r v14oben [internal] ready for requests
2015/09/12 12:45:59 77712AF0 r v14oben [internal] found card system videoguard2
2015/09/12 12:45:59 77712AF0 r v14oben [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/12 12:45:59 77712AF0 r v14oben [videoguard2] card detected
2015/09/12 12:45:59 77712AF0 r v14oben [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/09/12 12:46:01 0 s init for all local cards done
2015/09/12 12:46:01 0 s anti cascading disabled
2015/09/12 12:46:01 77729E48 c plain dvbapi-client granted (serverbox, au=auto (2 reader))
2015/09/12 12:46:01 77729E48 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/12 12:46:04 77729E48 c Found 0 ECMpids and 6 STREAMpids in PMT
2015/09/12 12:46:04 77729E48 c [DVBAPI] Receiver wants to demux srvid 2EF4 on adapter 0000 camask 0001 index 0000 pmtpid 002E
2015/09/12 12:46:04 77729E48 c New program number: 2EF4 (FFFE:2EF4 unknown) [pmt_list_management 3]

4gx35 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

deine oscam ist für loggen wenig geeignet, steht ausdrücklich auch in der anleitung, immer aktuelle nehmen,
also aus dem online feed mind. oscam 108xx besser 109xx installieren, (emu kann man nur deaktivieren, nicht einfach löschen)

Link ist nicht mehr aktiv., ist auch ohne emu, die hat alles was du zum loggen brauchst

log immer vom oscam start an posten, nicht aus livelog sondern aus files-logfile !!!

und spoiler verwenden !!!

Crow86 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

Also jetzt ist es oscam r10892

nach neustart

die log

2015/09/12 14:00:50 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10892 (mipsel-oe-linux-ssl-libusb)
2015/09/12 14:00:50 00000000 s (main) System name = Linux
2015/09/12 14:00:50 00000000 s (main) Host name = vusolo2
2015/09/12 14:00:50 00000000 s (main) Release = 3.3.8-2.0
2015/09/12 14:00:50 00000000 s (main) Version = #1 SMP Fri Oct 4 09:33:59 CEST 2013
2015/09/12 14:00:50 00000000 s (main) Machine = mips
2015/09/12 14:00:50 00000000 s (main) Stb model = dm8000
2015/09/12 14:00:50 00000000 s (main) Stb vumodel = vusolo2
2015/09/12 14:00:50 00000000 s (main) Stb boxtype = vusolo2
2015/09/12 14:00:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1382
2015/09/12 14:00:50 00000000 s (config) services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/09/12 14:00:50 00000000 s [Emu] oscam-emu version 716
2015/09/12 14:00:50 00000000 s (config) userdb reloaded: 4 accounts loaded, 0 expired, 1 disabled
2015/09/12 14:00:50 00000000 s (main) signal handling initialized
2015/09/12 14:00:50 00000000 s (config) 487 service-id's loaded in 5 ms
2015/09/12 14:00:50 00000000 s (config) 31 tier-id's loaded
2015/09/12 14:00:50 00000000 s (net) cccam: initialized (fd=5, port=33333)
2015/09/12 14:00:50 00000000 s (reader) v14oben [internal] creating thread for device /dev/sci0
2015/09/12 14:00:50 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/09/12 14:00:50 00000000 s (main) waiting for local card init
2015/09/12 14:00:50 44DC92BE r (reader) v14oben [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/09/12 14:00:50 44DC92BE r (reader) v14oben [internal] Reader sci internal, detected box type: vusolo2
2015/09/12 14:00:50 6B5B4F08 h (webif) webif: decompressed 164535 bytes back into 393232 bytes
2015/09/12 14:00:50 6B5B4F08 h (webif) HTTP Server running. ip=0.0.0.0 port=17000
2015/09/12 14:00:51 44DC92BE r (reader) v14oben [internal] card detected
2015/09/12 14:00:52 44DC92BE r (reader) v14oben [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/09/12 14:00:52 44DC92BE r (reader) v14oben [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/09/12 14:00:52 44DC92BE r (reader) v14oben [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/09/12 14:00:54 44DC92BE r (reader) v14oben [internal] Buffers readed 0 bytes total time_us 1624646
2015/09/12 14:00:54 44DC92BE r (reader) v14oben [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Card type: P1TV
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Rom version: 20AA
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Credit available on card: 0 euro
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Extended 4C detected
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] FuseByte: 00
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Region Code:
2015/09/12 14:00:55 44DC92BE r (reader) v14oben [internal] Country Code: DEU
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] Pincode read: 9365
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] PCB settings: FF FF FF FF
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] ready for requests
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [internal] found card system videoguard2
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] card detected
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] ------------------------------------------------------------------
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] +---------+----------+---------------------+---------------------+
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] |------- This card is not active, so no package available! ------|
2015/09/12 14:00:56 44DC92BE r (reader) v14oben [videoguard2] ------------------------------------------------------from-ins70--
2015/09/12 14:00:56 00000000 s (main) init for all local cards done
2015/09/12 14:00:56 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/09/12 14:00:56 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/09/12 14:00:56 00000000 s (anticasc) anti cascading disabled
2015/09/12 14:00:56 5DC75F60 c (client) plain dvbapi-client granted (serverbox, au=auto (2 reader))
2015/09/12 14:00:56 5DC75F60 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2015/09/12 14:00:56 5DC75F60 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/09/12 14:01:00 5DC75F60 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
2015/09/12 14:01:00 5DC75F60 c (dvbapi) Demuxer 0 serving srvid 2EF4 (RTL2) on adapter 0000 camask 0001 index 0000 pmtpid 002E
2015/09/12 14:01:12 5DC75F60 c (dvbapi) sdt-info (provider: CBC - channel: RTL2)

4gx35 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

was soll rtl2, auf sky krimi gehen und dann payload auslesen unter readers - i

Crow86 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

sorry

02 30 20 00 00 11

4gx35 · 12. September 2015

AW: Vserver mit mouse und v14 wird nicht erkannt

dann musst du jetzt mal länger loggen, nach 1std sollte 1 u-emm da sein,
ist alles in der anleitung zum loggen beschrieben, wie man seine emm ansehen kann

leider kann man neue v14 wohl nicht mehr ohne pairing aktivieren

im unterforum v14 mitlesen

Suche

Suche

Vserver mit mouse und v14 wird nicht erkannt

Crow86

Newbie

Hunchback1000

Crow86

Newbie

Hunchback1000

4gx35

Crow86

Newbie

4gx35

Crow86

Newbie

4gx35

Crow86

Newbie

4gx35

Crow86

Newbie

4gx35

Crow86

Newbie

4gx35

Ähnliche Themen

Spenden Unterstützung