V14 Problem!

[aglade]

Hallo,
seitdem ich von der V13 auf die V14 gewechselt bin, habe ich freezer und die Karte wird nach einer Weile ausgeworfen!
Habe nur die CAID und ins7e11 geändert. Oscam Version r8986

Spoiler

2013/12/14 20:04:42 55B8A0 r sky [videoguard2] classD0 ins40: (-2) status not ok 00 00
2013/12/14 20:04:42 55B8A0 r sky [videoguard2] The card is not answering correctly! Restarting reader for safety
2013/12/14 20:04:42 56F880 c user (098C&000000/0641/EF10/98:993339C8C7D6709C99FFF817D4048195): not found (2009 ms) by sky - RTL HD
2013/12/14 20:04:43 55B8A0 r sky [videoguard2] creating thread for device 002:002
2013/12/14 20:04:43 576D90 r sky [videoguard2] De SR_init
2013/12/14 20:04:43 576D90 r sky [videoguard2] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/12/14 20:04:43 576D90 r Found smartreader device 002:002
2013/12/14 20:04:43 576D90 r sky [videoguard2] Pthread Wordt gecreeerd
2013/12/14 20:04:43 576D90 r sky [videoguard2] clocking for smartreader with smartreader protocol
2013/12/14 20:04:43 576D90 r sky [videoguard2] Reader initialized (device=002:002, detect=cd, mhz=369, cardmhz=357)
2013/12/14 20:04:43 576D90 r sky [videoguard2] card detected
2013/12/14 20:04:43 576D90 r sky [smartreader] SR_reset wordt gerund
2013/12/14 20:04:44 550D78 p Cccam_Server configuration error!
2013/12/14 20:04:48 0 --- Skipped 1 duplicated log lines ---
2013/12/14 20:04:48 56F880 c user (098C&000000/0641/EF10/98:5EC11A5EEA6E0BBBBAF316B77BB3C0D3): rejected group (0 ms) - RTL HD (no matching reader)
2013/12/14 20:04:50 576D90 r sky [smartreader] Error activating card.
2013/12/14 20:04:50 576D90 r sky [smartreader] SR_reset wordt gerund
2013/12/14 20:04:54 576D90 r sky [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2013/12/14 20:04:54 576D90 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/12/14 20:04:54 576D90 r sky [smartreader] Calculated work ETU is 25.20 us
2013/12/14 20:04:54 576D90 r sky [smartreader] the SR_WriteSettings is called
2013/12/14 20:04:54 576D90 r sky [smartreader] The EnableSmarReader is called out off Sr_writesettings
2013/12/14 20:04:55 576D90 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specified in reader->mhz)
2013/12/14 20:04:55 567050 c user (098C&000000/019A/00DF/98:E86A9379F615C0E0A058B3B77086C819): rejected group (0 ms) - Sky Bundesliga (no matching reader)

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 1
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 1
preferlocalcards = 0
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 1
failban = 2
failbantime = 0
failbancount = 25


[monitor]
port = 988
aulow = 120
hideclient/to = 0
monlevel = 4
appendchaninfo = 1


[cccam]
port = 12000
reshare = 0
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240


[webif]
httpport = 83
httpuser =
httppwd =
httpcss = /var/InternerSpeicher/service/oscam/style.css
httprefresh = 10
httpallowed = 192.168.178.0-192.168.178.255
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 1
httpreadonly = 0
httpsavefullcfg = 1
httpdyndns =

oscam.server

Spoiler

[reader]
label = sky
protocol = smartreader
device = 002:002
Mhz = 357
cardmhz = 357
services = skyhd,skybuli,skysport,skyextra,skyfilm,skywelt,skyselect,bluemovie
boxid = 12345678
detect = cd
group = 2
emmcache = 1,3,2
caid = 098C
blockemm-g = 1
blockemm-unknown = 1
ins7e11 = 13

oscam.user

Spoiler

[account]
disabled = 0
user = user
pwd = pwd
description =
hostname =
caid =
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
keepalive = 0
au = sky
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel =
group = 1,2
services =
ident =
chid =
class =
cccmaxhops = 1
cccreshare = 1
cccignorereshare = -1
cccstealth = -1

 

[dodo83]

AW: V14 Problem!

und ins7e11 geändert

warum das, damit der fastmode läuft sollte der parameter auf 15 stehen

wie ist dein Smargo eingestellt

probier mal

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = sky[/COLOR]
[COLOR=#3E3E3E]protocol = smartreader[/COLOR]
[COLOR=#3E3E3E]device = 002:002[/COLOR]
[COLOR=#3E3E3E]mhz = 369[/COLOR]
[COLOR=#3E3E3E]cardmhz = 357[/COLOR]
[COLOR=#3E3E3E]services = skyhd,skybuli,skysport,skyextra,skyfilm,skywelt,sk yselect,bluemovie[/COLOR]
[COLOR=#3E3E3E]boxid = 12345678[/COLOR]
[COLOR=#3E3E3E]detect = cd[/COLOR]
[COLOR=#3E3E3E]group = 2[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]
[COLOR=#3E3E3E]caid = 098C[/COLOR]
[COLOR=#3E3E3E]blockemm-g = 1[/COLOR]
[COLOR=#3E3E3E]blockemm-unknown = 1[/COLOR]
[COLOR=#3E3E3E]ins7e11 = 15
[/COLOR]ndsversion = 2

und starte mal neu

 

[aglade]

AW: V14 Problem!

Wenn ich es auf 15 setze wird die Karte nicht erkannt!
Was bedeutet der Eintrag "ndsversion = 2" ?

 

[dodo83]

AW: V14 Problem!

ist der smargo richtig eingestellt? kenne mich mit dem auch leider nicht aus, benutze nur die mäuse

 

[aglade]

AW: V14 Problem!

Die Smargo Einstellungen sind noch so wie bei der V13!

Mode = Autoswitch
Kernel = Normal
T-mode = T=0
RGT = 0

 

[aglade]

Habe im log diese Meldung gefunden

2013/12/15 15:36:26 550108 p Cccam_Server configuration error!

lieg es vllt daran?

[reader]label = Cccam Server
enable = 1
protocol = cccam
device = xxxxxxxxx,12000
account = user
password = pwd
reconnecttimeout = 30
group = 1
cccversion = 2.1.4
cccmaxhops = 2
cccmindown = 1
cccwantemu = 0

ccckeepalive = 1

ist da alles richtig Eingetragen?

Habe jetzt mal meine oscam 8986 auf 9021 upgedatet, seitdem läuft es stabil! DD

Sie müssen registriert sein, um Links zu sehen.

 

[bombadil]

AW: V14 Problem!

Moin,

der Fehler wird hier gelegen haben

[COLOR=#ff0000]account [/COLOR]= user
password = pwd

Richtig ist

[COLOR=#ff0000]user[/COLOR][COLOR=#ff0000][/COLOR] = user
password = pwd

Der Syntaxfehler ist durch die Engabe im WebIf verschwunden.
Grüße
Bombadil