V14 ERROR (no entitlements)

[Egbert11]

Hallo erst mal.
Habe nun fast alles durchgelesen, komme aber nicht zum Ziel.
Freischaltung der V14 ohne Erfolg.
Server FRITZ!Box Fon WLAN 7170
Version: oscam-1.20-unstable_svn-r9850
NFR-OSCam Addon Version: 1.4.1
Smardreader v2
V14
Client Kathrein ufs910

Freischaltung Signal Online auf Sky Page angefordert, nichts passiert.

Mein Reader hat keine serial:

Du musst angemeldet sein, um Bilder zu sehen.

Log Oscam:

Spoiler

2015/06/21 16:53:46 4F9EF8 h sky [smargo] creating thread for device /dev/ttyUSB0
2015/06/21 16:53:46 4F9EF8 h loadbalancer: can't read from file /tmp/.oscam/stat
2015/06/21 16:53:46 534C08 r sky [smargo] smargo init type is smargo
2015/06/21 16:53:47 534C08 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2015/06/21 16:53:47 534C08 r sky [smargo] card detected
2015/06/21 16:53:55 534C08 r sky [smargo] Error activating card.
2015/06/21 16:54:12 0 --- Skipped 1 duplicated log lines ---
2015/06/21 16:54:12 0 --- Skipped 1 duplicated log lines ---
2015/06/21 16:54:12 534C08 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/06/21 16:54:12 534C08 r sky [smargo] card initializing error
2015/06/21 16:55:27 4F80F0 c encrypted cccam-client 192.168.2.30 granted (XXXX, au=on (1 reader))
2015/06/21 16:55:33 4F80F0 c XXXX (098C&000000/01FB/0017/98:F4C766A5012FDFED6867DB4C770D869B): rejected group (1 ms) - Sky Krimi (no matching reader)

Fritzbox

Server:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10653
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = sky
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
mhz = 357
cardmhz =
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,8070950000011D,8070940000011C,8170940000011C,8170540000011D,8070540000011DFDDFECEFEFEFEFEFEFEFEFEFEF
detect = cd
ident = 098C:000000
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1,36,38,40,42,65,74,126,131,141
ndsversion = 2

User:

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10653
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = user
pwd = pass
caid = 1702
monlevel = 1
au = sky
group = 1
cccmaxhops = 1
cccreshare = 1

[account]
user = zork
pwd = 08154711
caid = 098C,1830
au = sky
group = 1
cccmaxhops = 0

Config:

Spoiler

# Nachtfalke-Reloaded
#

Sie müssen registriert sein, um Links zu sehen.

# inkl. Blue_Shadow_V.2.css


[global]
# Speicherpfad für OSCam-logfile. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
logfile = /var/media/ftp/uStor01/addon/oscam/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
cwlogdir = 0
# Verzeichnisangabe für emmlogdir.
# Ohne Angabe ist das das Arbeitsverzeichnis von oscam
#emmlogdir =
clienttimeout = 5000
failbantime = 5
Failbancount = 3
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 0

#[newcamd]
#port = 34002@1830:003411;34003@09c4:000000;34004@0b00:000000
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0


[cccam]
port = 12000
reshare = 0
version = 2.2.1
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 0
nodeid =


[webif]
httpport = 83
httpuser = oscam
httppwd = XXXXXXX
# Speicherpfad für das Stylesheet. Wird bei der Installation automatisch
# auf das Arbeitsverzeichnis von oscam umgesetzt.
httpcss = /var/media/ftp/uStor01/addon/oscam/Blue_Shadow_V.2.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

UFS 910

Config

Spoiler

############# oscam.conf by Skywalker1 ##################################
# #
[global]
Nice = 0
ClientTimeout = 7
FallbackTimeout=3
ClientMaxIdle=120
CacheDelay = 0
BindWait = 20
ResolveDelay = 15
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
#disablelog=1
#logFile = /data/keys/oscam.log
PidFile = /tmp/oscam.pid

[webif]
httpport = 12345
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

[monitor]
appendchaninfo = 1

[dvbapi]
enabled = 1
user = dvbapi
boxtype = ufs910
au = sky

Server

Spoiler

#### Verbindung zu Camd Server #####
[reader]
enable = 1
label = cccam-reader
protocol = cccam
device = 192.168.2.1,12000
user = XXXXXX
password = XXXXXX
group = 1
cccversion = 2.2.1

User:

Spoiler

##### oscam.user by Skywalker1 #############
#
[account]
user = XXXXX
pwd = XXXXX
au = sky
uniq=0
group = 1
caid = 1843,0d05
#
######## Ende #############################

DVBAPI:

Spoiler

P:098C
I:0

Kann mir geholfen werden:emoticon-0179-headb

 

[B.G.A.]

AW: V14 ERROR (no entitlements)

Wenn du mal keine zu alte OSCam auf dem Server hast. Damit wir dir helfen können, nimm schleunigst die Karte aus dem Reader, spiele die Beispielkonfigs ein und frage dann noch mal nach.

 

[supraracer]

AW: V14 ERROR (no entitlements)

Die OScam 9850 ist etwas angestaubt, aber für die V14 völlig in Ordung.
Allerdings ist Fritzbox+Smartreader+V14 eine schlechte Kombination, die drei sind alles andere als gute Freunde.
Um es trotzdem mal zu probieren solltest du den Reader mit dem "smartreader" Protokoll und der Serial des Smargo einbinden, probiere es mal so:

Spoiler

[reader]
label = sky
protocol = smartreader
device = SRv2;Serial:xxxxxxxx
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Voraussetzung ist eine OScam mit smartreader (libusb) Support und eine gesetzte Serial beim Smargo (über das Smartreader Tool).

-supraracer

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Erst einmal besten Dank für eure schnelle Hilfe.
Wo bekommt man ein aktuelles Images für meine Box her?
Kann man die Serial im Device Name schreiben?


Besten Dank

 

[supraracer]

AW: V14 ERROR (no entitlements)

Ich habe dir den Reader für die oscam.server doch gepostet.
Anstatt xxxxxxx schreibst du da deine Serial rein, z.B.
device = SRv2;Serial:7654321

-supraracer

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Ja habe ich verstanden, aber wie oben beschrieben hat mein Reader keine Serial.

Sie müssen registriert sein, um Links zu sehen.

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Habe jetzt mit dem SmartReader2settings - Tool Serial geschrieben und werde es testen.

 

[cojo]

AW: V14 ERROR (no entitlements)

9850 geht ohne probleme,hab auch seit ewigkeiten die 9848 drauf ( ab der kam ja der Freezerpatch)

würde aber das mal ganz löschen blockemm-bylen = 1,36,38,40,42,65,74,126,131,141

beim clientenabändern

Spoiler

[dvbapi]
enabled = 1
user = dvbapi
boxtype = ufs910
au = 1

Spoiler

[account]
user = XXXXX
pwd = XXXXX
au = 1
uniq=0
group = 1
caid = 098C,1843,0d05

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Besten Dank.
Habe jetzt Serial auf die Karte geschrieben und Server und Client geändert.

Am Anfang stand bei der Reader noch Cardrock, jetzt steht wieder ERROR

Sie müssen registriert sein, um Links zu sehen.

)
Log:

Spoiler

• 2015/06/22 12:51:06 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1479
• 2015/06
• 2015/06/22 12:51:06 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9850 (mipsel-linux-uclibc-libusb)
• /22 12:51:06 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2015/06/22 12:51:06 0 s userdb reloaded: 15 accounts loaded, 0 expired, 0 disabled
• 2015/06/22 12:51:06 0 s signal handling initialized
• 2015/06/22 12:51:06 0 s 159 service-id's loaded in 14 ms
• 2015/06/22 12:51:06 0 s 161 tier-id's loaded
• 2015/06/22 12:51:06 0 s 4 provid's loaded
• 2015/06/22 12:51:06 0 s cccam: initialized (fd=6, port=12000)
• 2015/06/22 12:51:06 0 s sky [smartreader] creating thread for device SRv2;Serial:AX19571
• 2015/06/22 12:51:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/06/22 12:51:06 0 s waiting for local card init
• 2015/06/22 12:51:06 4F9EF8 h webif: decompressed 118462 bytes back into 272072 bytes
• 2015/06/22 12:51:06 4F9EF8 h HTTP Server running. ip=0.0.0.0 port=83
• 2015/06/22 12:51:06 4F80F0 r sky [smartreader] Reader initialized (device=SRv2;Serial:AX19571, detect=cd, mhz= AUTO, cardmhz=369)
• 2015/06/22 12:51:07 4F80F0 r sky [smartreader] card detected
• 2015/06/22 12:51:11 4F80F0 r sky [smartreader] ATR: 3F 03 40 57 5B
• 2015/06/22 12:51:11 4F80F0 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2015/06/22 12:51:11 4F80F0 r sky [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
• 2015/06/22 12:51:11 4F80F0 r sky [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
• 2015/06/22 12:51:11 4F80F0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
• 2015/06/22 12:51:12 4F80F0 r sky [smartreader] card system not supported
• 2015/06/22 12:51:12 4F80F0 r sky [smartreader] Normal mode failed, reverting to Deprecated Mode
• 2015/06/22 12:51:18 4F80F0 r sky [smartreader] ATR: 3F 03 40 57 5B
• 2015/06/22 12:51:18 4F80F0 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2015/06/22 12:51:18 4F80F0 r sky [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
• 2015/06/22 12:51:18 4F80F0 r sky [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
• 2015/06/22 12:51:19 4F80F0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
• 2015/06/22 12:51:20 4F80F0 r sky [smartreader] card system not supported
• 2015/06/22 12:51:20 4F80F0 r sky [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/06/22 12:51:20 4F80F0 r sky [smartreader] card initializing error
• 2015/06/22 12:51:21 0 s init for all local cards done
• 2015/06/22 12:51:21 0 s anti cascading disabled

Server:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10653
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = sky
protocol = smartreader
device = SRv2;Serial:AX19571
caid = 098C
boxid = 12345678
ins7e11 = 15
mhz = 357
cardmhz =
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D,8070540000011DFDDFECEFEFEFEFEFEFEFEFEFEF
detect = cd
ident = 098C:000000
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[pehedima]

AW: V14 ERROR (no entitlements)

Setze im Reader:

autospeed = 0
cardmhz = 357

Danach die Kiste komplett neu starten und oscam.log posten.

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Dank der kleinen Änderung Rockt sie wieder.

Log:

Spoiler

• 2015/06/22 13:28:03 0 s 159 service-id's loaded in 14 ms
• 2015/06/22 13:28:03 0 s 161 tier-id's loaded
• 2015/06/22 13:28:03 0 s 4 provid's loaded
• 2015/06/22 13:28:03 0 s cccam: initialized (fd=6, port=12000)
• 2015/06/22 13:28:03 0 s sky [smartreader] creating thread for device SRv2;Serial:AX19571
• 2015/06/22 13:28:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/06/22 13:28:03 0 s waiting for local card init
• 2015/06/22 13:28:03 4F9EF8 h webif: decompressed 118462 bytes back into 272072 bytes
• 2015/06/22 13:28:03 4F9EF8 h HTTP Server running. ip=0.0.0.0 port=83
• 2015/06/22 13:28:03 4F80F0 r sky [smartreader] Reader initialized (device=SRv2;Serial:AX19571, detect=cd, mhz=369, cardmhz=369)
• 2015/06/22 13:28:04 4F80F0 r sky [smartreader] card detected
• 2015/06/22 13:28:09 4F80F0 r sky [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/22 13:28:09 4F80F0 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/06/22 13:28:09 4F80F0 r sky [smartreader] Calculated work ETU is 6.30 us reader mhz = 369
• 2015/06/22 13:28:09 4F80F0 r sky [smartreader] Effective reader settings mhz =369 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
• 2015/06/22 13:28:10 4F80F0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Card type: P1TV
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Rom version: 20AA
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Credit available on card: 0 euro
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Extended 4C detected
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] FuseByte: 00
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Region Code:
• 2015/06/22 13:28:11 4F80F0 r sky [smartreader] Country Code: DEU
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] Pincode read: 8407
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] PCB settings: FF FF FF FF
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] serial: ########, BoxID: ########, baseyear: 2004
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] ready for requests
• 2015/06/22 13:28:12 4F80F0 r sky [smartreader] found card system videoguard2
• 2015/06/22 13:28:12 4F80F0 r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/22 13:28:12 4F80F0 r sky [videoguard2] card detected
• 2015/06/22 13:28:12 4F80F0 r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/22 13:28:38 0 s init for all local cards done
• 2015/06/22 13:28:38 0 s anti cascading disabled

 

[webman2]

AW: V14 ERROR (no entitlements)

Aber werden auch unique-EMM gespeichert ?

 

[Egbert11]

AW: V14 ERROR (no entitlements)

Nun habe ich das Problem, dass von meiner kathrein keine EMM´s reinkommen.

Log:

Spoiler

• 2015/06/22 14:27:24 4F80F0 r sky [videoguard2] creating thread for device SRv2;Serial:AX19571
• 2015/06/22 14:27:25 52BC70 r sky [videoguard2] Reader initialized (device=SRv2;Serial:AX19571, detect=cd, mhz=369, cardmhz=369)
• 2015/06/22 14:27:25 52BC70 r sky [videoguard2] card detected
• 2015/06/22 14:27:30 52BC70 r sky [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/22 14:27:30 52BC70 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/06/22 14:27:30 52BC70 r sky [smartreader] Calculated work ETU is 6.30 us reader mhz = 369
• 2015/06/22 14:27:30 52BC70 r sky [smartreader] Effective reader settings mhz =369 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
• 2015/06/22 14:27:30 52BC70 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2015/06/22 14:27:34 52BC70 r sky [smartreader] Card type: P1TV
• 2015/06/22 14:27:34 52BC70 r sky [smartreader] Rom version: 20AA
• 2015/06/22 14:27:34 52BC70 r sky [smartreader] Credit available on card: 0 euro
• 2015/06/22 14:27:34 52BC70 r sky [smartreader] Extended 4C detected
• 2015/06/22 14:27:36 52BC70 r sky [smartreader] FuseByte: 00
• 2015/06/22 14:27:36 52BC70 r sky [smartreader] Region Code:
• 2015/06/22 14:27:36 52BC70 r sky [smartreader] Country Code: DEU
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] Pincode read: 8407
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] PCB settings: FF FF FF FF
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] serial: ########, BoxID: ########, baseyear: 2004
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] ready for requests
• 2015/06/22 14:27:38 52BC70 r sky [smartreader] found card system videoguard2
• 2015/06/22 14:27:38 52BC70 r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/22 14:27:38 52BC70 r sky [videoguard2] card detected
• 2015/06/22 14:27:38 52BC70 r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/22 14:29:29 526B20 c xxxx disconnected from 192.168.2.30
• 2015/06/22 14:29:31 4F80F0 c encrypted cccam-client 192.168.2.30 granted (xxxxx, au=on (1 reader))
• 2015/06/22 14:29:38 52BC70 r sky [videoguard2] classD3 ins54: no cw --> [ERROR]Card isn't active[/ERROR]
• 2015/06/22 14:29:38 52BC70 r sky [videoguard2] classD3 ins54: no cw --> Card is paired
• 2015/06/22 14:29:38 4F80F0 c xxxx (098C&000000/01FB/0017/98:F9B56E31B0D768CE05E7DEB1CF795C40): not found (283 ms) by sky - Sky Krimi

dvbapi:

Spoiler

[dvbapi]
enabled = 1
user = dvbapi
boxtype = ufs910
au = 1

User:

Spoiler

[account]
user = xxxxxx
pwd = xxxxxx
au = 1
uniq=0
group = 1
caid = 098C,1843,0d05

 

[webman2]

AW: V14 ERROR (no entitlements)

Löschen in der oscam.user: caid = 098C,1843,0d05

Den Rest Deiner Dateien verbirgst Du.

 

[pehedima]

AW: V14 ERROR (no entitlements)

Poste bitte alle Configs vom Client

Bis auf DynDns (falls vorhanden) nichts unkenntlich machen.
Auch die user bitte nicht unkenntlich machen.