Umstieg auf Easymouse V14 Karten

[kukero7]

Hi an alle,

da ich mit den zeiten der V14 im smargo nicht zufrieden war, bin ich nun umgestiegen und hab mir die Easymouse besorgt. Ich habe 2x V14 aber leider werden diese nicht erkannt. Anbei auch mal meine oscam.server
leider muss ich dazu sagen, dass ich seit kurzen im webinterface den Live log einfach nur leer habe :-(
so kann ich nun keine LOG rauskopieren.....habt ihr hierzu auch noch einen tipp?

Easymouse habe ich beide auf: oben , unten , oben , oben

Gruß

Spoiler

[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2


[reader]
label = v14b
protocol = mouse
device = /dev/ttyUSB1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Spoiler

2015/09/12 01:57:13 0 s (reader) v14 [mouse] creating thread for device /dev/ttyUSB0
2015/09/12 01:57:13 0 s (reader) v14b [mouse] creating thread for device /dev/ttyUSB1
2015/09/12 01:57:13 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 81168
2015/09/12 01:57:13 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 75234
2015/09/12 01:57:14 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 90331
2015/09/12 01:57:14 1AB2A90 r (reader) v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/09/12 01:57:14 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 75721
2015/09/12 01:57:14 1AB2F60 r (reader) v14b [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2015/09/12 01:57:14 1AB2F60 r (reader) v14b [mouse] card detected
2015/09/12 01:57:14 1AB2A90 r (reader) v14 [mouse] card detected
2015/09/12 01:57:17 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 756142015/09/12 01:57:17 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 75095
2015/09/12 01:57:18 1AB2A90 r (reader) v14 [mouse] Error activating card.
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] ATR: 3F 00
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] Setting baudrate to 9600 bps
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 77139
2015/09/12 01:57:18 1AB2F60 r (reader) v14b [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/09/12 01:57:18 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 74852
2015/09/12 01:57:19 1AB2F60 r (reader) v14b [mouse] card system not supported
2015/09/12 01:57:19 1AB2F60 r (reader) v14b [mouse] Normal mode failed, reverting to Deprecated Mode
2015/09/12 01:57:19 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 75340
2015/09/12 01:57:20 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75185
2015/09/12 01:57:21 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 75513
2015/09/12 01:57:22 1AB2A90 r (reader) v14 [mouse] Error activating card.
2015/09/12 01:57:22 1AB2F60 r (reader) v14b [mouse] ATR: 3F FF 25 03 10 54 50 70 00 00 4B 00 3F FF 03 10 69 FF 50 00 4B 00 00 00
2015/09/12 01:57:22 1AB2F60 r (reader) v14b [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2015/09/12 01:57:22 1AB2F60 r (reader) v14b [mouse] Init card protocol T0, FI=1, F=372, D=1, N=16
2015/09/12 01:57:22 1AB2F60 r (reader) v14b [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/09/12 01:57:23 1AB2F60 r (reader) v14b [mouse] Buffers readed 0 bytes total time_us 75710
2015/09/12 01:57:23 1AB2F60 r (reader) v14b [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/09/12 01:57:23 1AB2A90 r (reader) v14 [mouse] Buffers readed 0 bytes total time_us 77268
2015/09/12 01:57:24 1AB2F60 r (reader) v14b [mouse] card system not supported
2015/09/12 01:57:24 1AB2F60 r (reader) v14b [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/09/12 01:57:24 1AB2F60 r (reader) v14b [mouse] card initializing error

 

[momchetoi]

AW: Umstieg auf Easymouse V14 Karten

Überprüfe die Einstellungen auf dem Easymouse 5V, Phoenix. Dann wähle 10Mhz und im Oscam.server versuche mit

mhz = 1000
cardmhz = 357

oder so

mhz = 357
autospeed = 0
cardmhz = 357

 

[Radagast]

AW: Umstieg auf Easymouse V14 Karten

Hi,

die V14 mit 10MHz? Ich wage mal zu behaupten das wird entweder nicht lange oder gar nicht funktionieren.

 

[liwool]

AW: Umstieg auf Easymouse V14 Karten

Easymouse habe ich beide auf: oben , unten , oben , oben

Vom Karten slot betrachtet wäre es richtig.

Spoiler

mhz = 600
cardmhz = 357

 

[kukero7]

AW: Umstieg auf Easymouse V14 Karten

Hi Leute!
das gibts doch nicht..stundenlang gestern rumgemacht und karten wurdennicht erkannt...heute morgen auf liwool gehört und mhz = 600
cardmhz = 357 eingetragen...und sofort ging es !! Danke

ECM bei ca. 75-80

 

[liwool]

AW: Umstieg auf Easymouse V14 Karten

Nach dann wünsch ich dir ein schönes Wochenende:emoticon-0111-blush