UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

[chuckaholic]

Guten Tag!

Ich habe folgendes "Problem"

Ich habe mir einen Gigablue 800 SE zugelegt mit dem ich Sky schauen möchte. Das Abo beziehe ich über Unitymedia, von welchen ich eine UM02 Karte zugeschickt bekommen habe.

Das Ziel ist jetzt also die Karte mit dem Receiver zu aktivieren und dann darüber Sky schauen zu können.

Dafür habe ich mir die oscam-experimental-cs (1.20-r0) heruntergeladen und installiert.

Ich habe die Karte telefonisch aktiviert und mit dem Receiver ein Programm meines Abopaketes eingeschaltet, allerdings wird es nicht hell.

Kann mir da bitte jemand helfen?


oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
cachedelay = 120
maxlogsize = 20
nice = -1
savehistory = 1



[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox
pmt_mode = 0
request_mode = 0



[webif]
httport = 80
httpallowed = 192.168.188.0 - 192.168.188.255

oscam.server

Spoiler

[reader]
label = UM02
protocol = internal
device = /dev/sci0
caid = 1838
Detect = CD
rsakey = B5***7FF
boxkey = A7***7C
group = 1
mhz = 368
cardmhz = 368
emmcache = 1,3,2

oscam.user

Spoiler

[account]
user = dvbapi
group = 1
au = 1

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Dec 22 15:37:53 2012
-------------------------------------------------------------------------------
2012/12/22 15:37:53 580370 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2012/12/22 15:37:53 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2012/12/22 15:37:53 0 version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2012/12/22 15:37:53 0 client max. idle=120 sec, debug level=0
2012/12/22 15:37:53 0 max. logsize=20 Kb, loghistorysize=4096 bytes
2012/12/22 15:37:53 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/12/22 15:37:54 580370 r ERROR in IO_Serial_Read (errno=0 Success)
2012/12/22 15:37:54 580370 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/12/22 15:37:55 580370 r detect native nagra card
2012/12/22 15:37:55 580370 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
2012/12/22 15:37:55 580370 r [nagra-reader] ProviderID: 00 00 04 01
2012/12/22 15:37:55 580370 r [nagra-reader] active to: 2003/01/01 11:59
2012/12/22 15:37:55 580370 r -----------------------------------------
2012/12/22 15:37:55 580370 r |id |tier |valid from |valid to |
2012/12/22 15:37:55 580370 r +----+--------+------------+------------+
2012/12/22 15:37:55 580370 r -----------------------------------------
2012/12/22 15:37:56 580370 r found cardsystem nagra
2012/12/22 15:37:56 580370 r ROM: D N A S P 1 4 2
2012/12/22 15:37:56 580370 r REV: R e v G 0 6
2012/12/22 15:37:56 580370 r SER: ** ** ** **
2012/12/22 15:37:56 580370 r CAID: 1838
2012/12/22 15:37:56 580370 r Prv.ID: 00 00 04 01 (sysid)
2012/12/22 15:37:56 580370 r Prv.ID: 00 00 00 00
2012/12/22 15:37:56 580370 r [nagra-reader] ready for requests
2012/12/22 15:37:56 0 s init for all local cards done
2012/12/22 15:37:56 0 s anti cascading disabled
2012/12/22 15:37:56 58B218 c plain dvbapi-client granted (dvbapi, au=auto (1 reader))
2012/12/22 15:37:56 58B218 c dvbapi: Warning: line containing rum. in oscam.dvbapi not recognized, ignoring line

2012/12/22 15:37:56 58B218 c dvbapi: Warning: line containing in oscam.dvbapi not recognized, ignoring line

2012/12/22 15:37:56 58B218 c dvbapi: 7 entries read from oscam.dvbapi
2012/12/22 15:37:58 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1748 PROVID: 000000
2012/12/22 15:37:58 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A48 PROVID: 000000
2012/12/22 15:37:58 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C30 PROVID: 000000
2012/12/22 15:37:58 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E30 PROVID: 000000
2012/12/22 15:37:58 58B218 c dvbapi: new program number: 0009 (1722:0009 unknown) [pmt_list_management 3]
2012/12/22 15:37:59 58B218 c dvbapi (1722&000000/1748/0009/93:9AC5): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:37:59 58B218 c dvbapi (1831&000000/1A48/0009/4A:EF76): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:37:59 58B218 c dvbapi (1835&000000/1C30/0009/89317): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:37:59 58B218 c dvbapi: try pids again #1
2012/12/22 15:37:59 58B218 c dvbapi (1838&000000/1E30/0009/92:7E9C): not found (69 ms) by um02
2012/12/22 15:38:00 58B218 c dvbapi (1722&000000/1748/0009/93:9AC5): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:00 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1742 PROVID: 000000
2012/12/22 15:38:00 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A42 PROVID: 000000
2012/12/22 15:38:00 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C2A PROVID: 000000
2012/12/22 15:38:00 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E2A PROVID: 000000
2012/12/22 15:38:00 58B218 c dvbapi: new program number: 000A (1722:000A unknown) [pmt_list_management 3]
2012/12/22 15:38:01 58B218 c dvbapi (1722&000000/1742/000A/93:8446): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:01 58B218 c dvbapi (1831&000000/1A42/000A/4A:E710): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:01 58B218 c dvbapi (1835&000000/1C2A/000A/89:B87F): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:01 58B218 c dvbapi: try pids again #1
2012/12/22 15:38:01 58B218 c dvbapi (1838&000000/1E2A/000A/92:2A39): not found (68 ms) by um02
2012/12/22 15:38:02 58B218 c dvbapi (1722&000000/1742/000A/93:8446): rejected group (165 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:02 58B218 c dvbapi (1831&000000/1A42/000A/4A:E710): rejected group (121 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:02 58B218 c dvbapi (1835&000000/1C2A/000A/89:B87F): rejected group (121 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:02 58B218 c dvbapi: try pids again #2
2012/12/22 15:38:02 58B218 c dvbapi (1838&000000/1E2A/000A/92:2A39): not found (121 ms) by um02
2012/12/22 15:38:02 58B218 c dvbapi (1722&000000/1742/000A/93:8446): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:03 58B218 c dvbapi (1831&000000/1A42/000A/4A:E710): rejected group (121 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:03 58B218 c dvbapi (1835&000000/1C2A/000A/89:B87F): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:03 58B218 c dvbapi: try pids again #3
2012/12/22 15:38:03 58B218 c dvbapi: can't decode channel
2012/12/22 15:38:03 58B218 c dvbapi (1838&000000/1E2A/000A/92:2AB1): not found (66 ms) by um02
2012/12/22 15:38:48 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1744 PROVID: 000000
2012/12/22 15:38:48 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A44 PROVID: 000000
2012/12/22 15:38:48 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C2C PROVID: 000000
2012/12/22 15:38:48 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E2C PROVID: 000000
2012/12/22 15:38:48 58B218 c dvbapi: new program number: 000B (1722:000B unknown) [pmt_list_management 3]
2012/12/22 15:38:48 58B218 c dvbapi (1722&000000/1744/000B/93:BD32): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:48 58B218 c dvbapi (1831&000000/1A44/000B/4A:B745): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:48 58B218 c dvbapi (1835&000000/1C2C/000B/89:FC52): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:49 58B218 c dvbapi: try pids again #1
2012/12/22 15:38:49 58B218 c dvbapi (1838&000000/1E2C/000B/92:1953): not found (69 ms) by um02
2012/12/22 15:38:49 58B218 c dvbapi (1722&000000/1744/000B/93:BD32): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:49 58B218 c dvbapi (1831&000000/1A44/000B/4A:B745): rejected group (121 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:50 58B218 c dvbapi (1835&000000/1C2C/000B/89:FC52): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:50 58B218 c dvbapi: try pids again #2
2012/12/22 15:38:50 58B218 c dvbapi (1838&000000/1E2C/000B/92:1953): not found (120 ms) by um02
2012/12/22 15:38:50 58B218 c dvbapi (1722&000000/1744/000B/93:BD32): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:51 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1742 PROVID: 000000
2012/12/22 15:38:51 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A42 PROVID: 000000
2012/12/22 15:38:51 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C2A PROVID: 000000
2012/12/22 15:38:51 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E2A PROVID: 000000
2012/12/22 15:38:51 58B218 c dvbapi: new program number: 000A (1722:000A unknown) [pmt_list_management 3]
2012/12/22 15:38:51 58B218 c dvbapi (1722&000000/1742/000A/93:A5E2): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:51 58B218 c dvbapi (1831&000000/1A42/000A/4A:C265): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:51 58B218 c dvbapi (1835&000000/1C2A/000A/89E6F): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:52 58B218 c dvbapi: try pids again #1
2012/12/22 15:38:52 58B218 c dvbapi (1838&000000/1E2A/000A/920E5): not found (69 ms) by um02
2012/12/22 15:38:52 58B218 c dvbapi (1722&000000/1742/000A/93:A5E2): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:52 58B218 c dvbapi (1831&000000/1A42/000A/4A:C265): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:53 58B218 c dvbapi (1835&000000/1C2A/000A/89E6F): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:53 58B218 c dvbapi: try pids again #2
2012/12/22 15:38:53 58B218 c dvbapi (1838&000000/1E2A/000A/920E5): not found (120 ms) by um02
2012/12/22 15:38:53 58B218 c dvbapi (1722&000000/1742/000A/93:A5E2): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:53 58B218 c dvbapi (1831&000000/1A42/000A/4A:C265): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:53 58B218 c dvbapi (1835&000000/1C2A/000A/89:3BE1): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:38:54 58B218 c dvbapi: try pids again #3
2012/12/22 15:38:54 58B218 c dvbapi: can't decode channel
2012/12/22 15:38:54 58B218 c dvbapi (1838&000000/1E2A/000A/92:EA93): not found (107 ms) by um02
2012/12/22 15:45:56 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1700 PROVID: 000000
2012/12/22 15:45:56 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A00 PROVID: 000000
2012/12/22 15:45:56 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1BE8 PROVID: 000000
2012/12/22 15:45:56 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1DE8 PROVID: 000000
2012/12/22 15:45:56 58B218 c dvbapi: new program number: 0011 (1722:0011 unknown) [pmt_list_management 3]
2012/12/22 15:45:57 58B218 c dvbapi (1722&000000/1700/0011/93:5CC1): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:57 58B218 c dvbapi (1831&000000/1A00/0011/4A529): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:57 58B218 c dvbapi (1835&000000/1BE8/0011/89:8A66): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:57 58B218 c dvbapi: try pids again #1
2012/12/22 15:45:57 58B218 c dvbapi (1838&000000/1DE8/0011/92:901E): not found (65 ms) by um02
2012/12/22 15:45:58 58B218 c dvbapi (1722&000000/1700/0011/93:5CC1): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:58 58B218 c dvbapi (1831&000000/1A00/0011/4A529): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:58 58B218 c dvbapi (1835&000000/1BE8/0011/89:8A66): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:58 58B218 c dvbapi: try pids again #2
2012/12/22 15:45:58 58B218 c dvbapi (1838&000000/1DE8/0011/92:901E): not found (120 ms) by um02
2012/12/22 15:45:58 58B218 c dvbapi (1722&000000/1700/0011/93:5CC1): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:59 58B218 c dvbapi (1831&000000/1A00/0011/4A529): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:59 58B218 c dvbapi (1835&000000/1BE8/0011/89:8A66): rejected group (120 ms) (0 of 0) (no matching reader)
2012/12/22 15:45:59 58B218 c dvbapi: try pids again #3
2012/12/22 15:45:59 58B218 c dvbapi: can't decode channel
2012/12/22 15:45:59 58B218 c dvbapi (1838&000000/1DE8/0011/92:901E): not found (120 ms) by um02

Ich habe leider keine Ahnung wie ich die Emoticons da rausbekomme, sie sollen ": D" bedeuten.

Schonmals vielen Dank!

 

[chuckaholic]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Ich habe mittlerweile auf Anraten meine oscam.user verändert:

oscam.user

Spoiler

[account]
user = dvbapi
group = 1
au = UM02
caid = 1838

was zu diesem log führte:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Dec 22 19:47:00 2012
-------------------------------------------------------------------------------
2012/12/22 19:47:00 0 s starting thread log_list_thread
2012/12/22 19:47:00 0 s log_list_thread thread started
2012/12/22 19:47:00 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2012/12/22 19:47:00 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2012/12/22 19:47:00 0 s client max. idle=120 sec, debug level=0
2012/12/22 19:47:00 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2012/12/22 19:47:00 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/12/22 19:47:00 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/12/22 19:47:00 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/12/22 19:47:00 0 s signal handling initialized (type=sysv)
2012/12/22 19:47:00 0 s 164 service-id's loaded in 9ms
2012/12/22 19:47:00 0 s oscam.tiers loading failed
2012/12/22 19:47:00 0 s 14 provid's loaded
2012/12/22 19:47:00 0 s 0 lengths for caid guessing loaded
2012/12/22 19:47:00 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2012/12/22 19:47:00 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s monitor: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s camd35: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s cs378x: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s newcamd: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s pandora: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s csp: disabled
2012/12/22 19:47:00 0 s Starting listener 0
2012/12/22 19:47:00 0 s radegast: disabled
2012/12/22 19:47:00 0 s http disabled
2012/12/22 19:47:00 0 s starting thread reader check
2012/12/22 19:47:00 0 s reader check thread started
2012/12/22 19:47:00 0 s starting thread check
2012/12/22 19:47:00 0 s check thread started
2012/12/22 19:47:00 0 s creating thread for device /dev/sci0
2012/12/22 19:47:00 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/12/22 19:47:00 0 s waiting for local card init
2012/12/22 19:47:00 580370 r reader um02 initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2012/12/22 19:47:01 580370 r um02 card detected
2012/12/22 19:47:04 580370 r ERROR in IO_Serial_Read (errno=0 Success)
2012/12/22 19:47:05 580370 r ATR: 78 F8 08 00 F8 08 08 C8 F0 98 00 80 B0 88 98
2012/12/22 19:47:05 580370 r ERROR: Could not read reader->convention
2012/12/22 19:47:05 580370 r Error activating card.
2012/12/22 19:47:06 580370 r ERROR in IO_Serial_Read (errno=0 Success)
2012/12/22 19:47:06 580370 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2012/12/22 19:47:07 580370 r ERROR in IO_Serial_Read (errno=0 Success)
2012/12/22 19:47:07 580370 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/12/22 19:47:08 580370 r detect native nagra card
2012/12/22 19:47:08 580370 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
2012/12/22 19:47:08 580370 r [nagra-reader] ProviderID: 00 00 04 01
2012/12/22 19:47:08 580370 r [nagra-reader] active to: 2003/01/01 11:59
2012/12/22 19:47:09 580370 r -----------------------------------------
2012/12/22 19:47:09 580370 r |id |tier |valid from |valid to |
2012/12/22 19:47:09 580370 r +----+--------+------------+------------+
2012/12/22 19:47:09 580370 r -----------------------------------------
2012/12/22 19:47:09 580370 r found cardsystem nagra
2012/12/22 19:47:09 580370 r ROM: D N A S P 1 4 2
2012/12/22 19:47:09 580370 r REV: R e v G 0 6
2012/12/22 19:47:09 580370 r SER: ** ** ** **
2012/12/22 19:47:09 580370 r CAID: 1838
2012/12/22 19:47:09 580370 r Prv.ID: 00 00 04 01 (sysid)
2012/12/22 19:47:09 580370 r Prv.ID: 00 00 00 00
2012/12/22 19:47:09 580370 r [nagra-reader] ready for requests
2012/12/22 19:47:10 0 s init for all local cards done
2012/12/22 19:47:10 0 s anti cascading disabled
2012/12/22 19:47:10 58B218 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2012/12/22 19:47:10 58B218 c dvbapi: 1 entries read from oscam.dvbapi
2012/12/22 19:47:11 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1700 PROVID: 000000
2012/12/22 19:47:11 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A00 PROVID: 000000
2012/12/22 19:47:11 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1BE8 PROVID: 000000
2012/12/22 19:47:11 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1DE8 PROVID: 000000
2012/12/22 19:47:11 58B218 c dvbapi: new program number: 0011 (1722:0011 unknown) [pmt_list_management 3]
2012/12/22 19:47:11 58B218 c dvbapi (1838&000000/1DE8/0011/92:3B75): not found (66 ms) by um02
2012/12/22 19:47:12 58B218 c dvbapi (1722&000000/1700/0011/93:33A0): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:47:12 58B218 c dvbapi (1831&000000/1A00/0011/4A:6442): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:47:12 58B218 c dvbapi: try pids again #1
2012/12/22 19:47:12 58B218 c dvbapi (1835&000000/1BE8/0011/89:EEDF): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:47:12 58B218 c dvbapi (1838&000000/1DE8/0011/92:3B75): not found (120 ms) by um02
2012/12/22 19:47:12 58B218 c dvbapi (1722&000000/1700/0011/93:33A0): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:47:12 58B218 c dvbapi (1831&000000/1A00/0011/4A:6442): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:47:13 58B218 c dvbapi: try pids again #2
2012/12/22 19:47:13 58B218 c dvbapi (1835&000000/1BE8/0011/89:EEDF): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:47:13 58B218 c dvbapi (1838&000000/1DE8/0011/92:3B75): not found (120 ms) by um02
2012/12/22 19:47:13 58B218 c dvbapi (1722&000000/1700/0011/93:33A0): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:47:13 58B218 c dvbapi (1831&000000/1A00/0011/4A:6442): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:47:13 58B218 c dvbapi: try pids again #3
2012/12/22 19:47:13 58B218 c dvbapi: can't decode channel
2012/12/22 19:47:13 58B218 c dvbapi (1835&000000/1BE8/0011/89:EEDF): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:11 58B218 c dvbapi: [ADD PID 0] CAID: 1831 ECM_PID: 1ABE PROVID: 000000
2012/12/22 19:52:11 58B218 c dvbapi: [ADD PID 1] CAID: 1835 ECM_PID: 1CA6 PROVID: 000000
2012/12/22 19:52:11 58B218 c dvbapi: [ADD PID 2] CAID: 1838 ECM_PID: 1EA6 PROVID: 000000
2012/12/22 19:52:11 58B218 c dvbapi: new program number: 0072 (1831:0072 unknown) [pmt_list_management 3]
2012/12/22 19:52:12 58B218 c dvbapi (1838&000000/1EA6/0072/92:F3FC): not found (67 ms) by um02
2012/12/22 19:52:12 58B218 c dvbapi (1831&000000/1ABE/0072/4A:BF0A): rejected caid (121 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:12 58B218 c dvbapi: try pids again #1
2012/12/22 19:52:12 58B218 c dvbapi (1835&000000/1CA6/0072/89:A023): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:13 58B218 c dvbapi (1838&000000/1EA6/0072/92:8ECE): not found (69 ms) by um02
2012/12/22 19:52:13 58B218 c dvbapi (1831&000000/1ABE/0072/4A:AB74): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:13 58B218 c dvbapi: try pids again #2
2012/12/22 19:52:13 58B218 c dvbapi (1835&000000/1CA6/0072/89:A023): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:14 58B218 c dvbapi (1838&000000/1EA6/0072/92:8ECE): not found (120 ms) by um02
2012/12/22 19:52:14 58B218 c dvbapi (1831&000000/1ABE/0072/4A:AB74): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:14 58B218 c dvbapi: try pids again #3
2012/12/22 19:52:14 58B218 c dvbapi: can't decode channel
2012/12/22 19:52:14 58B218 c dvbapi (1835&000000/1CA6/0072/89:A023): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:18 58B218 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1740 PROVID: 000000
2012/12/22 19:52:18 58B218 c dvbapi: [ADD PID 1] CAID: 1831 ECM_PID: 1A40 PROVID: 000000
2012/12/22 19:52:18 58B218 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1C28 PROVID: 000000
2012/12/22 19:52:18 58B218 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1E28 PROVID: 000000
2012/12/22 19:52:18 58B218 c dvbapi: new program number: 0017 (1722:0017 unknown) [pmt_list_management 3]
2012/12/22 19:52:18 58B218 c dvbapi (1838&000000/1E28/0017/92:B6EA): not found (70 ms) by um02
2012/12/22 19:52:19 58B218 c dvbapi (1722&000000/1740/0017/93:F495): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:52:19 58B218 c dvbapi (1831&000000/1A40/0017/4A:39B0): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:19 58B218 c dvbapi: try pids again #1
2012/12/22 19:52:19 58B218 c dvbapi (1835&000000/1C28/0017/89:8608): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:20 58B218 c dvbapi (1838&000000/1E28/0017/92:B6EA): not found (120 ms) by um02
2012/12/22 19:52:20 58B218 c dvbapi (1722&000000/1740/0017/93:F495): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:52:20 58B218 c dvbapi (1831&000000/1A40/0017/4A:39B0): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:20 58B218 c dvbapi: try pids again #2
2012/12/22 19:52:20 58B218 c dvbapi (1835&000000/1C28/0017/89:8608): rejected caid (120 ms) (0 of 0) (invalid caid 1835)
2012/12/22 19:52:20 58B218 c dvbapi (1838&000000/1E28/0017/92:B6EA): not found (120 ms) by um02
2012/12/22 19:52:20 58B218 c dvbapi (1722&000000/1740/0017/93:F495): rejected caid (120 ms) (0 of 0) (invalid caid 1722)
2012/12/22 19:52:21 58B218 c dvbapi (1831&000000/1A40/0017/4A:39B0): rejected caid (120 ms) (0 of 0) (invalid caid 1831)
2012/12/22 19:52:21 58B218 c dvbapi: try pids again #3
2012/12/22 19:52:21 58B218 c dvbapi: can't decode channel
2012/12/22 19:52:21 58B218 c dvbapi (1835&000000/1C28/0017/89:8608): rejected caid (120 ms) (0 of 0) (invalid caid 1835)

Es bleibt also weiterhin dunkel.

Tipps wären also sehr wilkommen

 

[bombadil]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Hi,

schreib dir mal eine oscam.dvbapi

P: 1838
I: 0

Rechte auf 644, ins Verzeichnis der anderen Oscam Files.

Liebe Grüße
Bombadil

 

[waddi]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Ich glaube Du musst noch einen User anlegen ;-) Dich!

 

[bombadil]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Hi Waddi,

der User dvbapi im account der oscam.user ist doch "Er".

Lieben Gruß
Bombadil

 

[modino2711]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

so wie es aussieht ist die karte noch nicht aktiv.
kommen dann beim reader unique emms an ?

alternativ scam installieren um erst mal die karte zu aktivieren !

 

[waddi]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

:emoticon-0111-blush Ui, zu schnell falsch gelesen. Sorry:emoticon-0167-beer:

 

[chuckaholic]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Ersteinmal vielen Dank!

Ich habe jetzt Scam installiert, nochmal angerufen und somit konnte die Karte aktiviert werden!

Kann ich jetzt bedenkenlos auf die Oscam wechseln, oder muss ich da vorher noch etwas berücksichtigen?

EDIT:

Achja, ich nehme an, dass man das mit den unique emms im webif sieht?

Das kann ich trotz dem eintrag in der oscam.conf nicht aufrufen.
Das openwebif der Gigablue kann jedoch aufgerufen werden.
Die Ports habe ich schon überprüft.

Muss ich evtl. noch eine oscam.services o.Ä. schreiben?

 

[modino2711]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Das kann ich trotz dem eintrag in der oscam.conf nicht aufrufen.
Das openwebif der Gigablue kann jedoch aufgerufen werden.
Die Ports habe ich schon überprüft.

da hast du wohl nenn schreibfehler in der oscam.conf :
du schreibst:
[webif]
httpport = 80
httpallowed = 192.168.188.0 - 192.168.188.255 <- passt das so für dein netzwerk

ein p vergessen und nimm mal nenn anderen port als 80

Muss ich evtl. noch eine oscam.services o.Ä. schreiben?

brauchst du nicht, wenn die karte nur lokal bei dir läuft, also ohne CS

 

[chuckaholic]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Oh man, da quält man sich solang mit den files rum und dabei wars nur ein Tippfehler

Vielen Dank dafür, jetzt klappt die Entschlüsselung mit Oscam und ins Webif komme ich auch.
Wenn unter Readers->EMM written UK/G/S/UQ
0/2/6/11 steht ist doch alles im grünen Bereich, oder?

 

[modino2711]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

im webIF auf readers und dann bei deinem reader rechts auf den bleistift = edit this reader

in der zeile -> blockemm häckchen rein bei unknown und global.

der rest ist ok.

 

[chuckaholic]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Worin liegt denn der Unterschied zwischen globalen emms und den shared bzw. unique?

 

[chuckaholic]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Nach eurer Hilfe läuft nun alles wie gewollt, vielen Dank dafür!

Falls jemand vor dem gleichen Problem stehen sollte, oder für einen ähnlichen Fall ein paar Anhaltspunkte benötigt, poste ich hier nochmal die funktionierenden Configs:

Das in rot geschriebene sind Anmerkungen, bitte nicht übernehmen.

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
cachedelay = 120
maxlogsize = 20
nice = -1
savehistory = 1

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8080
#httpallowed = 192.168.178.0 - 192.168.178.255 #Dieser Eintrag ist sehr speziell. Hier wird die IP-Adresse der Geräte eingetragen die Zugriff zum webinterface der Oscam haben sollen. Dies wird in eurem Fall sicher anders aussehen, daher habe ich es mit der vorangestellten # deaktiviert.

oscam.dvbapi

Spoiler

P: 1838
I: 0

oscam.server

Spoiler

[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
rsakey = B5***7FF #Die Keys müsst ihr euch selbst googlen. Man findet sie z.B. im oscam config creator
boxkey = A7***C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1

oscam.user

Spoiler

[account]
user = dvbapi
group = 1
au = UM02
caid = 1838

 

[pweiss]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Nabend,

ich stehe vor dem gleichen Problem wie du.
Ich habe alles so übernommen, wie du gepostet hast, aber irgendwie will es nicht hell werden.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Apr 17 22:07:27 2013
-------------------------------------------------------------------------------
2013/04/17 22:07:27 0 s starting thread log_list_thread
2013/04/17 22:07:27 0 s log_list_thread thread started
2013/04/17 22:07:27 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/04/17 22:07:27 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/04/17 22:07:27 0 s client max. idle=120 sec, debug level=0
2013/04/17 22:07:27 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2013/04/17 22:07:27 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2013/04/17 22:07:27 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/04/17 22:07:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/04/17 22:07:27 0 s signal handling initialized (type=sysv)
2013/04/17 22:07:27 0 s 164 service-id's loaded in 9ms
2013/04/17 22:07:27 0 s oscam.tiers loading failed
2013/04/17 22:07:27 0 s 14 provid's loaded
2013/04/17 22:07:27 0 s 0 lengths for caid guessing loaded
2013/04/17 22:07:27 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/04/17 22:07:27 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s monitor: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s camd35: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s cs378x: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s newcamd: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s pandora: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s csp: disabled
2013/04/17 22:07:27 0 s Starting listener 0
2013/04/17 22:07:27 0 s radegast: disabled
2013/04/17 22:07:27 0 s starting thread http
2013/04/17 22:07:27 0 s http thread started
2013/04/17 22:07:27 0 s starting thread reader check
2013/04/17 22:07:27 0 s reader check thread started
2013/04/17 22:07:27 0 s starting thread check
2013/04/17 22:07:27 0 s check thread started
2013/04/17 22:07:27 0 s creating thread for device /dev/sci0
2013/04/17 22:07:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/17 22:07:27 0 s waiting for local card init
2013/04/17 22:07:27 580468 r reader um02 initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/04/17 22:07:27 58A5C0 h HTTP Server listening on port 8080
2013/04/17 22:07:28 580468 r um02 card detected
2013/04/17 22:07:31 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:31 580468 r ATR: 78 F8 08 00 F8 48 08 C8 F0 98 00 80 B0 88 98 80
2013/04/17 22:07:31 580468 r ERROR: Could not read reader->convention
2013/04/17 22:07:31 580468 r Error activating card.
2013/04/17 22:07:33 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:33 580468 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2013/04/17 22:07:34 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:34 580468 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/04/17 22:07:35 580468 r detect native nagra card
2013/04/17 22:07:35 580468 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
2013/04/17 22:07:35 580468 r [nagra-reader] ProviderID: 00 00 04 01
2013/04/17 22:07:35 580468 r [nagra-reader] active to: 2013/07/15 12:59
2013/04/17 22:07:35 580468 r -----------------------------------------
2013/04/17 22:07:35 580468 r |id |tier |valid from |valid to |
2013/04/17 22:07:35 580468 r +----+--------+------------+------------+
2013/04/17 22:07:35 580468 r |1103|3084 |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|5924 |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|585D |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|5794 |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|05DD |2013/03/19 |2013/07/18 |
2013/04/17 22:07:35 580468 r |1103|318B |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|05F1 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:35 580468 r |1103|318A |2013/04/10 |2013/07/15 |
2013/04/17 22:07:35 580468 r |1103|3188 |2013/04/10 |2013/07/15 |
2013/04/17 22:07:36 580468 r |1103|3189 |2013/04/10 |2013/07/15 |
2013/04/17 22:07:36 580468 r |1103|000F |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|05DF |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|05DE |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|05E7 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|05E8 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|7D27 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|7D23 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|04CE |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|00F0 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r |1103|0605 |2013/03/19 |2013/07/18 |
2013/04/17 22:07:36 580468 r -----------------------------------------
2013/04/17 22:07:36 580468 r Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2013/04/17 22:07:36 580468 r card system not supported
2013/04/17 22:07:36 580468 r Normal mode failed, reverting to Deprecated Mode
2013/04/17 22:07:40 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:40 580468 r ATR: 78 F8 48 00 F8 48 08 C8 F0 98 00 80 B0 88 98 80
2013/04/17 22:07:40 580468 r ERROR: Could not read reader->convention
2013/04/17 22:07:40 580468 r Error activating card.
2013/04/17 22:07:41 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:41 580468 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2013/04/17 22:07:42 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:42 580468 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/04/17 22:07:44 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:45 580468 r detect native nagra card
2013/04/17 22:07:47 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:49 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:51 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:53 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:55 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:07:57 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:00 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:02 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:02 580468 r card system not supported
2013/04/17 22:08:02 580468 r card initializing error
2013/04/17 22:08:02 0 s init for all local cards done
2013/04/17 22:08:02 0 s anti cascading disabled
2013/04/17 22:08:02 58D640 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2013/04/17 22:08:02 58D640 c dvbapi: 2 entries read from oscam.dvbapi
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 0] CAID: 1850 ECM_PID: 195A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1A5A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1B5A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1C5A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 4] CAID: 1831 ECM_PID: 1D5A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: [ADD PID 5] CAID: 098E ECM_PID: 1E5A PROVID: 000000
2013/04/17 22:08:07 58D640 c dvbapi: new program number: 00DD (1850:00DD unknown) [pmt_list_management 3]
2013/04/17 22:08:07 58D640 c dvbapi: try pids again #1
2013/04/17 22:08:07 58D640 c dvbapi: try pids again #2
2013/04/17 22:08:07 58D640 c dvbapi: try pids again #3
2013/04/17 22:08:07 58D640 c dvbapi: can't decode channel
2013/04/17 22:08:29 58A5C0 h Restart requested by WebIF from 192.168.178.80
2013/04/17 22:08:29 58A5C0 h restart oscam requested
2013/04/17 22:08:30 0 s killing client dvbapi
2013/04/17 22:08:30 0 s killing reader um02
2013/04/17 22:08:30 0 s userdb 1 accounts freed
2013/04/17 22:08:30 58A5C0 h HTTP Server: Shutdown requested.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Apr 17 22:08:30 2013
-------------------------------------------------------------------------------
2013/04/17 22:08:30 0 s starting thread log_list_thread
2013/04/17 22:08:30 0 s log_list_thread thread started
2013/04/17 22:08:30 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/04/17 22:08:30 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/04/17 22:08:30 0 s client max. idle=120 sec, debug level=0
2013/04/17 22:08:30 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2013/04/17 22:08:30 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2013/04/17 22:08:30 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/04/17 22:08:30 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/04/17 22:08:30 0 s signal handling initialized (type=sysv)
2013/04/17 22:08:30 0 s 164 service-id's loaded in 4ms
2013/04/17 22:08:30 0 s oscam.tiers loading failed
2013/04/17 22:08:30 0 s 14 provid's loaded
2013/04/17 22:08:30 0 s 0 lengths for caid guessing loaded
2013/04/17 22:08:30 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/04/17 22:08:30 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s monitor: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s camd35: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s cs378x: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s newcamd: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s pandora: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s csp: disabled
2013/04/17 22:08:30 0 s Starting listener 0
2013/04/17 22:08:30 0 s radegast: disabled
2013/04/17 22:08:30 0 s starting thread http
2013/04/17 22:08:30 0 s http thread started
2013/04/17 22:08:30 0 s starting thread reader check
2013/04/17 22:08:30 0 s reader check thread started
2013/04/17 22:08:30 0 s starting thread check
2013/04/17 22:08:30 0 s check thread started
2013/04/17 22:08:30 0 s creating thread for device /dev/sci0
2013/04/17 22:08:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/17 22:08:30 0 s waiting for local card init
2013/04/17 22:08:30 5899C8 h HTTP Server listening on port 8080
2013/04/17 22:08:30 580468 r reader um02 initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/04/17 22:08:31 580468 r um02 card detected
2013/04/17 22:08:34 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:34 580468 r ATR: 78 F8 08 00 F8 08 08 C8 F0 98 00 80 B0 88 98
2013/04/17 22:08:34 580468 r ERROR: Could not read reader->convention
2013/04/17 22:08:34 580468 r Error activating card.
2013/04/17 22:08:36 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:36 580468 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2013/04/17 22:08:37 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:37 580468 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/04/17 22:08:38 580468 r detect native nagra card
2013/04/17 22:08:38 580468 r [nagra-reader] type: NAGRA, caid: 1838, IRD ID: FF FF FF FF
2013/04/17 22:08:38 580468 r [nagra-reader] ProviderID: 00 00 04 01
2013/04/17 22:08:38 580468 r [nagra-reader] active to: 2013/07/15 12:59
2013/04/17 22:08:38 580468 r -----------------------------------------
2013/04/17 22:08:38 580468 r |id |tier |valid from |valid to |
2013/04/17 22:08:38 580468 r +----+--------+------------+------------+
2013/04/17 22:08:38 580468 r |1103|3084 |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|5924 |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|585D |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|5794 |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|05DD |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|318B |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|05F1 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|318A |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|3188 |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|3189 |2013/04/10 |2013/07/15 |
2013/04/17 22:08:39 580468 r |1103|000F |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|05DF |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|05DE |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|05E7 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|05E8 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|7D27 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|7D23 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|04CE |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|00F0 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r |1103|0605 |2013/03/19 |2013/07/18 |
2013/04/17 22:08:39 580468 r -----------------------------------------
2013/04/17 22:08:40 580468 r Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2013/04/17 22:08:40 580468 r card system not supported
2013/04/17 22:08:40 580468 r Normal mode failed, reverting to Deprecated Mode
2013/04/17 22:08:43 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:43 580468 r ATR: 78 F8 08 00 F8 48 08 C8 F0 98 00 80 B0 88 98 C0
2013/04/17 22:08:43 580468 r ERROR: Could not read reader->convention
2013/04/17 22:08:43 580468 r Error activating card.
2013/04/17 22:08:45 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:45 580468 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
2013/04/17 22:08:46 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:46 580468 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/04/17 22:08:48 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:49 580468 r detect native nagra card
2013/04/17 22:08:51 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:53 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:55 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:57 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:08:59 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:09:01 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:09:03 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:09:05 580468 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/17 22:09:05 580468 r card system not supported
2013/04/17 22:09:05 580468 r card initializing error
2013/04/17 22:09:06 0 s init for all local cards done
2013/04/17 22:09:06 0 s anti cascading disabled
2013/04/17 22:09:06 58C8B0 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2013/04/17 22:09:06 58C8B0 c dvbapi: 2 entries read from oscam.dvbapi
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 0] CAID: 1850 ECM_PID: 195A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1A5A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 2] CAID: 1835 ECM_PID: 1B5A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 3] CAID: 1838 ECM_PID: 1C5A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 4] CAID: 1831 ECM_PID: 1D5A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: [ADD PID 5] CAID: 098E ECM_PID: 1E5A PROVID: 000000
2013/04/17 22:09:06 58C8B0 c dvbapi: new program number: 00DD (1850:00DD unknown) [pmt_list_management 3]
2013/04/17 22:09:06 58C8B0 c dvbapi: try pids again #1
2013/04/17 22:09:06 58C8B0 c dvbapi: try pids again #2
2013/04/17 22:09:06 58C8B0 c dvbapi: try pids again #3
2013/04/17 22:09:06 58C8B0 c dvbapi: can't decode channel

 

[bombadil]

AW: UM 02 aktivieren & lesen mit Oscam auf Gigablue 800 SE

Hi,

2013/04/17 22:08:40 580468 r Negotiate sessionkey was not successfull! Please check rsa key and boxkey

Überprüfen, ob die Keys richtig sind. Keine Leerzeichen.

Grüße
Bombadil