Tvheadend + Oscam: invalid start code at encrypted HD channels

soulrebell · 7. Dezember 2017

Hallo zusammen,
ich arbeite zurzeit daran mit Tvheadend von meinem Odroid C2 auf meinen Router (TP-link Archer C7) umzuziehen. Hierzu habe ich auf den besagten Geräten jeweils eine Tvheadend Version laufen. Oscam zum entschlüsseln meiner HD+ Karte von Kabel Deutschland läuft auf einem Raspberry pi2.
Konfiguration Odroid -->Raspberry-Oscam funktioniert seit Monaten (bis auf ein kleines Problem vor kurzem, was ich mit Hilfe des Forums hier jedoch schnell lösen konnte)

Konfiguration Router -->Raspberry-Oscam funktioniert nicht für die verschlüsselte Sender
Unverschlüsselte Sender laufen übrigens ohne Probleme
Letztendlich erhalte ich im Tvheadend Log folgende Meldung, wenn ich einen verschl. Sender anschauen möchte.

Code:

[WARNING]:TS: kg/130MHz/ProSieben HD: H264 @ #6841: Invalid start code 84:12:a6
[WARNING]:TS: kg/130MHz/ProSieben HD: AC3 @ #6842: Invalid start code 8a:6a:ea

Bei der Initialisierung von Tvheadend bekomme ich im Log die Ausgabe, daß EMM's weitergeleitet werden
hier der ensprechende Auszug.

Code:

2017-12-07 09:07:09.666 [   INFO]:cwc: Attemping to connect to 192.168.100:50002
2017-12-07 09:07:09.671 [   INFO]:cwc: Connected to 192.168.100:50002
2017-12-07 09:07:09.671 [  TRACE]:cwc: sending message sid 25858 len 74 enq 0
2017-12-07 09:07:09.671 [  TRACE]:cwc: 00 00 03 D7 CF 8C 00 16 53 CE 22 9F 2B D3 FE 5F ........S.".+.._
2017-12-07 09:07:09.671 [  TRACE]:cwc: FE 51 45 A8 1D A4 2B D1 45 9E 39 EF DB 27 21 A3 .QE...+.E.9..'!.
2017-12-07 09:07:09.671 [  TRACE]:cwc: E5 60 0F 66 BC 1B 25 D3 60 65 7F 5D 26 9B 74 94 .`.f..%.`e.]&.t.
2017-12-07 09:07:09.671 [  TRACE]:cwc: E0 27 A1 EF 6F DD A0 92 B0 D1 FA B7 37 BA F2 3A .'..o.......7..:
2017-12-07 09:07:09.671 [  TRACE]:cwc: BD A8 90 FE FF A7 6A DF 43 36                   ......j.C6   
2017-12-07 09:07:09.681 [  TRACE]:cwc: sending message sid 0 len 26 enq 0
2017-12-07 09:07:09.681 [  TRACE]:cwc: 00 00 33 A5 B7 6E 55 AD F2 12 9B E1 DD 3A 42 ED ..3..nU......:B.
2017-12-07 09:07:09.681 [  TRACE]:cwc: CB 41 84 39 FD FB 6D 70 CA F1                   .A.9..mp..   
2017-12-07 09:07:09.684 [   INFO]:cwc: 192.168.100:50002: Connected as user router_tv to a NDS-card [0x09c7 : 00.00.00.00.2a.69.69.01] with 1 provider
2017-12-07 09:07:09.684 [   INFO]:cwc: 192.168.100:50002: Provider ID #1: 0x09c7:0x000000 00.00.00.00.2a.69.69.00
2017-12-07 09:07:09.684 [   INFO]:cwc: 192.168.100:50002: Will forward EMMs

und entsprechend der Oscam log

Code:

2017/12/07 09:07:09 6169F897 c   (client) encrypted newcamd:50002-client 192.168.0.4 granted (router_tv, au=on (1 reader))
2017/12/07 09:07:09 6169F897 c  (newcamd) user router_tv authenticated successfully (Tvheadend)
2017/12/07 09:07:09 6169F897 c  (newcamd) AU enabled for user router_tv on reader KDGKARTE

Dann bekomme ich jedoch im tvheadend log eine wiederkehrende Meldung (hier nur ein Ausschnitt), die ich nicht verstehe?
Bei meinem funktionierenden System erscheint diese Meldung nicht.

Code:

2017-12-07 09:07:11.131 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 09c7 (2503) pid 1509 (5385) valid 1
2017-12-07 09:07:11.132 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 1861 (6241) pid 1507 (5383) valid 1
2017-12-07 09:07:11.133 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 1834 (6196) pid 1505 (5381) valid 1
2017-12-07 09:07:11.432 [  TRACE]:cwc: emm filter : NDS - len 59 mux 0x56c12360
2017-12-07 09:07:11.433 [  TRACE]:cwc: 82 70 38 40 2A 77 0E FF 00 00 D8 02 00 2C 90 2A .p8@*w.......,.*
2017-12-07 09:07:11.434 [  TRACE]:cwc: 44 01 80 CE 40 04 18 AE 03 16 6A 9B 12 30 4D 50 D...@.....j..0MP
2017-12-07 09:07:11.435 [  TRACE]:cwc: B3 71 91 12 80 DD 9D 70 F7 3D 75 F1 E0 4E 11 BD .q.....p.=u..N..
2017-12-07 09:07:11.435 [  TRACE]:cwc: E8 D8 7D 63 64 97 4A AB 93 29 00                ..}cd.J..).   
2017-12-07 09:07:11.436 [  TRACE]:cwc: emm filter : NDS - len 59 mux 0x56c12360
2017-12-07 09:07:11.436 [  TRACE]:cwc: 82 70 38 40 2A 77 0F 00 00 00 D8 02 00 2C 90 2A .p8@*w.......,.*
2017-12-07 09:07:11.436 [  TRACE]:cwc: 44 01 EB 36 C0 CA FC 6C 1A 3F 09 5C 9E 8B 3D 6C D..6...l.?.\..=l
2017-12-07 09:07:11.436 [  TRACE]:cwc: 46 71 87 01 E7 36 A6 5A 16 CF EC 82 88 41 AB B1 Fq...6.Z.....A..
2017-12-07 09:07:11.437 [  TRACE]:cwc: 48 82 9A 31 73 C2 9A E9 36 60 00                H..1s...6`.   
2017-12-07 09:07:11.437 [  TRACE]:cwc: emm filter : NDS - len 59 mux 0x56c12360
2017-12-07 09:07:11.437 [  TRACE]:cwc: 82 70 38 40 2A 77 0F 01 00 00 D8 02 00 2C 90 2A .p8@*w.......,.*
2017-12-07 09:07:11.437 [  TRACE]:cwc: 44 01 8F D1 F3 A3 C8 7A BA B6 F2 D8 7A 21 CB 28 D......z....z!.(
2017-12-07 09:07:11.437 [  TRACE]:cwc: 86 0B 02 96 4A 93 9F 7A 02 C6 54 4E 29 D6 F1 54 ....J..z..TN)..T
2017-12-07 09:07:11.437 [  TRACE]:cwc: 71 3F 6B 77 8B 18 03 89 16 FC 00                q?kw.......

Wenn ich dann einen verschlüsselten Sender anschauen möchte erscheint Folgendes im tvheadend log

Code:

2017-12-07 09:22:04.311 [   INFO]:mpegts: 130MHz in kg - tuning on Sundtek DVB-C (III) #0 : DVB-C #0
2017-12-07 09:22:04.411 [  DEBUG]:cwc: kg/130MHz/ProSieben HD using CWC 192.168.100:50002
2017-12-07 09:22:04.412 [   INFO]:subscription: 0002: "::ffff:192.168.0.104 [ soulrebell | Kodi Media Center ]" subscribing on channel "ProSieben HD", weight: 150, adapter: "Sundtek DVB-C (III) #0 : DVB-C #0", network: "kg", mux: "130MHz", provider: "Digital Free", service: "ProSieben HD", profile="htsp", hostname="::ffff:192.168.0.104", username="soulrebell", client="Kodi Media Center"
2017-12-07 09:22:04.534 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 09c7 (2503) pid 1509 (5385) valid 1
2017-12-07 09:22:04.534 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 1861 (6241) pid 1507 (5383) valid 1
2017-12-07 09:22:04.534 [  TRACE]:cwc: caid update event - client kg_CA mux 0x56c12360 caid 1834 (6196) pid 1505 (5381) valid 1
2017-12-07 09:22:04.561 [  DEBUG]:cwc: ECM state INIT
2017-12-07 09:22:04.561 [  DEBUG]:cwc: Insert preferred ECM (PID 6849) for service "ProSieben HD"
2017-12-07 09:22:04.561 [  TRACE]:cwc: sending message sid 50015 len 130 enq 1
2017-12-07 09:22:04.561 [  TRACE]:cwc: 00 00 98 64 68 0B E7 DA B8 4A EE C8 F3 61 6F FD ...dh....J...ao.
2017-12-07 09:22:04.561 [  TRACE]:cwc: 4B 29 62 AC 20 D7 7C AD 5B EE 9D 16 88 F6 7E A5 K)b. .|.[.....~.
2017-12-07 09:22:04.561 [  TRACE]:cwc: F3 66 7C 13 59 C8 3D 17 23 A1 1B 0A 1B F3 67 FB .f|.Y.=.#.....g.
2017-12-07 09:22:04.561 [  TRACE]:cwc: 5B 9F 1E 18 DE F4 A6 42 75 84 78 17 D9 2E B2 3F [......Bu.x....?
2017-12-07 09:22:04.561 [  TRACE]:cwc: 14 B4 56 79 7A D2 14 28 19 BC 9F D2 7F B3 43 A1 ..Vyz..(......C.
2017-12-07 09:22:04.561 [  TRACE]:cwc: 5A 4D 9A FC 1B 19 A2 08 39 B8 CE DE 79 48 87 E1 ZM......9...yH..
2017-12-07 09:22:04.561 [  TRACE]:cwc: E2 9F DA A5 07 03 86 35 47 E0 54 D1 58 03 A1 D6 .......5G.T.X...
2017-12-07 09:22:04.561 [  TRACE]:cwc: C7 0C 64 0B 61 EB 3B 5A 0C 23 6F 7E DF DB F7 09 ..d.a.;Z.#o~....
2017-12-07 09:22:04.561 [  TRACE]:cwc: 77 30                                           w0           
2017-12-07 09:22:04.561 [  DEBUG]:cwc: Sending ECM (PID 6849) section=0/0, for service "ProSieben HD" (seqno: 33)
2017-12-07 09:22:04.642 [  DEBUG]:cwc: Received ECM reply (PID 6849) for service "ProSieben HD" [0] even: 55.9e.a2.95.21.1f.c2.02 odd: 73.46.01.ba.c1.d7.0e.a6 (seqno: 33 Req delay: 80 ms)
2017-12-07 09:22:04.642 [  DEBUG]:cwc: Obtained DES keys for service "ProSieben HD" in 80 ms, from cwc-192.168.100-50002-09C7
2017-12-07 09:22:04.669 [WARNING]:TS: kg/130MHz/ProSieben HD: H264 @ #6841: Invalid start code c9:9d:45

und im Oscam log Folgendes

Code:

2017/12/07 09:22:04 6169F897 c      (ecm) router_tv (09C7@000000/0027/C35F/69:EC26CAE91AEC84E9BA7E719ADB4BA0C8:0F06000000000000:): found (70 ms) by KDGKARTE
2017/12/07 09:22:13 6169F897 c      (ecm) router_tv (09C7@000000/0027/C35F/69:11699A725901F3447DFD55E86FB78786:0F06000000000000:): found (58 ms) by KDGKARTE

Also auf der Oscam Seite schein alles i. O zu sein.
Ich habe nachfolgend noch meine Config Dateien von Oscam anghängt.

Code:

[reader]
label                         = KDGKARTE
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 09C7
boxid                         = 12345678
detect                        = cd
mhz                           = 357
cardmhz                       = 357
ident                         = 09C7:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-u      =  0
blockemm-s      =  1
blockemm-g      =  1
blockemm-unknown = 1
ins7e11 = 15
ndsversion = 2

Code:

[account]
user = tvheadend
pwd = ++++++
uniq = 0
group = 1
caid = 09C7
ident = 09C7:000000
au = KDGKARTE
#
[account]
user = router_tv
pwd = +++++
uniq = 0
group = 1
caid = 09C7
ident = 09C7:000000
au = KDGKARTE

Code:

[global]
logfile                       = /var/log/oscam/oscam.log
disableuserfile               = 0
nice                          = -1
maxlogsize                    = 256
preferlocalcards              = 1
usrfile                       = /var/log/oscam/oscamuser.log

[cache]

[newcamd]
port                          = 50002@09C7:000000
key                           = 0102030405060708091011121314
keepalive                     = 1

[webif]
httpport                      = 8888
httprefresh                   = 5
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

Des weiteren noch die vollständigen Log von Oscam

Code:

Status Live Log    Config Readers Users Services Files Failban CacheEX    Scripts Restart
2017/12/07 09:06:12 00000000 s     (main) System name    = Linux
2017/12/07 09:06:12 00000000 s     (main) Host name      = raspberrypi
2017/12/07 09:06:12 00000000 s     (main) Release        = 4.4.38-v7+
2017/12/07 09:06:12 00000000 s     (main) Version        = #938 SMP Thu Dec 15 15:22:21 GMT 2016
2017/12/07 09:06:12 00000000 s     (main) Machine        = armv7l
2017/12/07 09:06:12 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14638
2017/12/07 09:06:12 00000000 s couldn't open statistics file: /var/log/oscam/oscamuser.log
2017/12/07 09:06:12 00000000 s   (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/12/07 09:06:12 00000000 s     (main) signal handling initialized
2017/12/07 09:06:12 00000000 s      (net) newcamd: initialized (fd=4, port=50002)
2017/12/07 09:06:12 00000000 s      (net) -> CAID: 09C7 PROVID: 000000
2017/12/07 09:06:12 00000000 s   (reader) KDGKARTE [mouse] creating thread for device /dev/ttyUSB0
2017/12/07 09:06:12 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/12/07 09:06:12 00000000 s     (main) waiting for local card init
2017/12/07 09:06:12 05939FE0 h    (webif) webif: decompressed 170156 bytes back into 418392 bytes
2017/12/07 09:06:12 05939FE0 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  0 bytes total time_us 75142
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 1 value 03 time_us 3568
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 2 value 40 time_us 1235
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 3 value 77 time_us 19877
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 4 value 5b time_us 1406
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 5 value bf time_us 1285
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 6 value f5 time_us 1419
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 7 value ff time_us 1288
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 8 value 3f time_us 1294
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 9 value 33 time_us 2786
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 10 value f2 time_us 1410
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 11 value 57 time_us 1296
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 12 value 69 time_us 1412
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 13 value 00 time_us 1283
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 14 value ad time_us 1298
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 15 value f5 time_us 2794
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 16 value f0 time_us 1409
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 17 value fe time_us 1284
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 18 value 3f time_us 1419
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 19 value 2d time_us 1289
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 20 value cd time_us 1419
2017/12/07 09:06:12 560E611E r   (reader) KDGKARTE [mouse] Flush readed byte Nr 21 value 3f time_us 1287
2017/12/07 09:06:13 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  21 bytes total time_us 128747
2017/12/07 09:06:13 560E611E r   (reader) KDGKARTE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2017/12/07 09:06:13 560E611E r   (reader) KDGKARTE [mouse] card detected
2017/12/07 09:06:13 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  0 bytes total time_us 75125
2017/12/07 09:06:14 560E611E r   (reader) KDGKARTE [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2017/12/07 09:06:14 560E611E r   (reader) KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2017/12/07 09:06:14 560E611E r   (reader) KDGKARTE [mouse] Setting baudrate to 9600 bps
2017/12/07 09:06:14 560E611E r   (reader) KDGKARTE [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/12/07 09:06:15 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  0 bytes total time_us 75130
2017/12/07 09:06:15 560E611E r   (reader) KDGKARTE [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] Card type:   KLPV
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] Rom version: 10LM
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] Credit available on card: 0 euro
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] found card system videoguard2
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [videoguard2] card detected
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2017/12/07 09:06:16 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  0 bytes total time_us 75148
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] Setting baudrate to 153600 bps
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] Buffers readed  0 bytes total time_us 75144
2017/12/07 09:06:17 560E611E r   (reader) KDGKARTE [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Card type:   KLPV
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Rom version: 10LM
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Credit available on card: 0 euro
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] FuseByte: 25
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Region Code: DEU00001
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Country Code: DEU
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] Pincode read: 4702
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] PCB settings: FF FF FF FF
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] serial: ########, BoxID: ########, baseyear: 2004
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] ready for requests
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [mouse] found card system videoguard2
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] card detected
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] ------------------------------------------------------------------
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] +---------+----------+---------------------+---------------------+
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 00 ---|-- 00fa --| 2018/03/04-00:00:00 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 00 ---|-- 00f3 --| 2018/03/04-00:00:00 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 00 ---|-- 00f4 --| 2018/03/04-00:00:00 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 00 ---|-- 00fe --| 2018/03/04-00:00:00 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 01 ---|-- 0101 --| 2018/03/04-00:00:02 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 01 ---|-- 0133 --| 2018/03/04-00:00:02 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] |-- 01 ---|-- 0190 --| 2018/03/04-00:00:02 |
2017/12/07 09:06:19 560E611E r   (reader) KDGKARTE [videoguard2] ------------------------------------------------------from-ins70--
2017/12/07 09:06:19 00000000 s     (main) init for all local cards done
2017/12/07 09:06:20 00000000 s (emmcache) loaded 7974 emmcache records from /tmp/.oscam/oscam.emmcache in 163 ms
2017/12/07 09:06:20 00000000 s (emmcache) loaded 7974 emmstat records from /tmp/.oscam/oscam.emmstat in 81 ms
2017/12/07 09:06:20 00000000 s (anticasc) anti cascading disabled
2017/12/07 09:06:20 28A162FA c  (newcamd) client connected to 50002 port
2017/12/07 09:06:20 28A162FA c   (client) encrypted newcamd:50002-client 192.168.0.124 granted (tvheadend, au=on (1 reader))
2017/12/07 09:06:20 28A162FA c  (newcamd) user tvheadend authenticated successfully (Tvheadend)
2017/12/07 09:06:20 28A162FA c  (newcamd) AU enabled for user tvheadend on reader KDGKARTE
2017/12/07 09:07:09 6169F897 c  (newcamd) client connected to 50002 port
2017/12/07 09:07:09 6169F897 c   (client) encrypted newcamd:50002-client 192.168.0.4 granted (router_tv, au=on (1 reader))
2017/12/07 09:07:09 6169F897 c  (newcamd) user router_tv authenticated successfully (Tvheadend)
2017/12/07 09:07:09 6169F897 c  (newcamd) AU enabled for user router_tv on reader KDGKARTE
2017/12/07 09:22:04 6169F897 c      (ecm) router_tv (09C7@000000/0027/C35F/69:EC26CAE91AEC84E9BA7E719ADB4BA0C8:0F06000000000000:): found (70 ms) by KDGKARTE
2017/12/07 09:22:13 6169F897 c      (ecm) router_tv (09C7@000000/0027/C35F/69:11699A725901F3447DFD55E86FB78786:0F06000000000000:): found (58 ms) by KDGKARTE
2017/12/07 09:24:41 6169F897 c   (client) router_tv disconnected from 192.168.0.4
Save LogShow SettingsStop Log
TOP
OSCam Webinterface developed by Streamboard Team
Current Time: 07.12.17 | 09:43:20 Start Time: 07.12.17 | 09:06:12 OSCam Run Time: 00:37:08
Process ID: 686 Access from: 192.168.0.104 Run as: root System Up Time: 07d 12:17:55
OSCam: 1.20-unstable_svn Build: r11392 Compiler: arm-linux-gnueabihf
WebIf Style by

Den vollständigen Tvheadend log habe ich als zip Datei angehängt, da dieser zu groß ist.

Hat jemand eine Idee woran das liegen könnte?

Bolle1902 · 9. Dezember 2017

Ich frage jetzt aus reiner Neugier auch wenn ich keine Lösung habe .
Welche dvb-s/c Karte bzw. USB Stick hast du an dem Raspberry ?

Gesendet von iPhone mit Tapatalk

soulrebell · 9. Dezember 2017

@Bolle1902
Den Raspberry nutze ich nur als Cardserver bzw. zur Hausautomatisierung.
An dem Router bzw. Odroid verwende ich für dvb-c Sundtek Sticks und einen PCTV Triplestick 292e.

Bzgl. meines Problems:
In meiner obigen Lösung habe ich das Newcamd Protokoll verwendet, hier komme ich irgendwie nicht weiter.
Ich habe mit meinem Wissen hier keine Ansätze mehr, woran es liegen kann.
Jetzt habe ich für den Router noch oscam compilliert und installiert, um das Ganze nur auf dem Router mal mit dvbapi probieren.
Hier ein Auszug aus dem Oscam log, hat natürlich auch nicht funktioniert

[

CODE]2017/12/08 21:09:35 00000000 s (anticasc) anti cascading disabled
2017/12/08 21:09:35 38AAA883 c (client) plain dvbapi-client granted (dvbapi, au=on (1 reader))
2017/12/08 21:09:35 38AAA883 c (dvbapi) dvbapi channelcache loaded from /etc/oscam/oscam.ccache
2017/12/08 21:09:35 38AAA883 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2017/12/08 21:09:37 38AAA883 c (dvbapi) Client connected: 'Tvheadend 4.3-710' (protocol version = 2)
2017/12/08 21:12:05 38AAA883 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09FD ECM_PID: 19F7 PROVID: 000000
2017/12/08 21:12:05 38AAA883 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 19F9 PROVID: 000000
2017/12/08 21:12:05 38AAA883 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 19F5 PROVID: 000000
2017/12/08 21:12:05 38AAA883 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT
2017/12/08 21:12:05 38AAA883 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 19F9 ANY CHID PMTPID 0000 VPID 19F1
2017/12/08 21:12:07 38AAA883 c (dvbapi) Demuxer 0 stop descrambling program number C35C (09FD@000000:C35C unknown)
2017/12/08 21:12:11 38AAA883 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1AC1 ECM_PID: 1FFF PROVID: 000000
2017/12/08 21:12:11 38AAA883 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2017/12/08 21:12:11 38AAA883 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/08 21:12:14 38AAA883 c (dvbapi) Demuxer 0 stop descrambling program number C35F (1AC1@000000:C35F unknown)
2017/12/08 21:12:16 38AAA883 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09FD ECM_PID: 19F7 PROVID: 000000
2017/12/08 21:12:16 38AAA883 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 19F9 PROVID: 000000
2017/12/08 21:12:16 38AAA883 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 19F5 PROVID: 000000
2017/12/08 21:12:16 38AAA883 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT
2017/12/08 21:12:16 38AAA883 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 19F9 ANY CHID PMTPID 0000 VPID 19F1
2017/12/08 21:12:19 38AAA883 c (dvbapi) Demuxer 0 stop descrambling program number C35C (09FD@000000:C35C unknown)
2017/12/08 21:17:44 38AAA883 c (dvbapi) Client connected: 'Tvheadend 4.3-710' (protocol version = 2)[/CODE]

Ich habe jetzt meine Einstellungen mehrmals geprüft und finde hier keinen Fehler.
Nachfolgend habe die geänderten Files nochmals angehängt. Oscam.server habe ich gegenüber meiner früheren Konfiguration nicht geändert, ist oben angehängt.

Code:

[global]
logfile                       = /var/log/oscam/oscam.log
disableuserfile               = 0
nice                          = -1
maxlogsize                    = 256
preferlocalcards              = 1
usrfile                       = /var/log/oscam/oscamuser.log

[cache]

#[newcamd]
#port                          = 50002@09C7:000000
#key                           = 0102030405060708091011121314
#keepalive                     = 1

[dvbapi]
enabled = 1
boxtype = pc
user = dvbapi
au = KDGKARTE
pmt_mode = 0
listen_port = 9000
request_mode = 0


[webif]
httpport                      = 8888
httprefresh                   = 5
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

Code:

[account]
user = dvbapi
pwd = ++++++
uniq = 0
group = 1
caid = 09C7
au = KDGKARTE

Code:

P: 09C7 1

Könnte mal bitte jemand drüber schauen, ob ich das was übersehe.
Mfg

Suche

Suche

Tvheadend + Oscam: invalid start code at encrypted HD channels

soulrebell

Newbie

Anhänge

Bolle1902

Ist gelegentlich hier

soulrebell

Newbie

Ähnliche Themen

Spenden Unterstützung