gelöst Stinger USB Dual Smartcard Reader

[Phelbes]

Klick auf Read Settings.
Phoenix Mode und die entsprechende Frequenz werden angezeigt.

Sieht dann so aus:

Reader1 Com6:

Du musst angemeldet sein, um Bilder zu sehen.

Reader 2 Com7:

Du musst angemeldet sein, um Bilder zu sehen.

 

[16v]

Ja genau.
Sind beide bei mir bei 3.572

Gesendet von meinem SM-G920F mit Tapatalk

 

[Phelbes]

Sollte passen für HD+.

 

[16v]

Hallo!

In der Fritz!Box dieses Oscam

Spoiler: LiveLog

2017/08/09 16:05:34 3563542B r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/08/09 16:05:34 37CC24CA h (webif) Reader hdplus restarted by WebIF from 192.168.178.72
2017/08/09 16:05:35 3563542B r (reader) hdplus [mouse] detect native nagra card
2017/08/09 16:05:35 3563542B r (reader) hdplus [mouse] card system not supported
2017/08/09 16:05:35 3563542B r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2017/08/09 16:05:35 3563542B r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75167
2017/08/09 16:05:36 37CC24CA h (webif) Reader hdplus restarted by WebIF from 192.168.178.72
2017/08/09 16:05:36 3563542B r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 90 80 70 FF 47 00 44 4F 41 53 50 31 34 32 20 52 65 77 47 43 37
2017/08/09 16:05:36 3563542B r (reader) hdplus [mouse] Init card protocol T0, FI=9, F=512, D=16, N=255
2017/08/09 16:05:36 3563542B r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2017/08/09 16:05:36 3563542B r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75179
2017/08/09 16:05:36 3563542B r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/08/09 16:05:37 3563542B r (reader) hdplus [mouse] card system not supported
2017/08/09 16:05:37 3563542B r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/08/09 16:05:37 3563542B r (reader) hdplus [mouse] card initializing error
2017/08/09 16:05:38 3563542B r (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
2017/08/09 16:05:38 708A8608 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75159
2017/08/09 16:05:38 708A8608 r (-) -- Skipped 1 duplicated log lines --
2017/08/09 16:05:38 708A8608 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=!cts, mhz=368, cardmhz=368)
2017/08/09 16:05:39 708A8608 r (reader) hdplus [mouse] card detected
2017/08/09 16:05:39 708A8608 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75217
2017/08/09 16:05:40 708A8608 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 80 71 FE 47 00 44 4F 40 53 50 30 34 32 20 53 64 76 47 43 36 61
2017/08/09 16:05:40 708A8608 r (reader) hdplus [mouse] Init card protocol T0, FI=9, F=512, D=16, N=255
2017/08/09 16:05:40 708A8608 r (reader) hdplus [mouse] Setting baudrate to 115200 bps
2017/08/09 16:05:40 708A8608 r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2017/08/09 16:05:41 708A8608 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75184
2017/08/09 16:05:41 708A8608 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/08/09 16:05:42 708A8608 r (reader) hdplus [mouse] card system not supported
2017/08/09 16:05:42 708A8608 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2017/08/09 16:05:42 708A8608 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75168
2017/08/09 16:05:43 708A8608 r (reader) hdplus [mouse] ATR: 3F FF 94 00 FF 91 81 71 FE 47 00 44 4F 40 53 50 30 34 32 20 52 65 77 47 43 37 61
2017/08/09 16:05:43 708A8608 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=8, N=255
2017/08/09 16:05:43 708A8608 r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2017/08/09 16:05:43 708A8608 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75162
2017/08/09 16:05:43 708A8608 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/08/09 16:05:45 708A8608 r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 251
2017/08/09 16:05:46 708A8608 r (reader) hdplus [mouse] card system not supported
2017/08/09 16:05:46 708A8608 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/08/09 16:05:46 708A8608 r (reader) hdplus [mouse] card initializing error

so sieht meine Oscam.server auf der Fritte aus:

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-emu SVN r11384
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label                         = hdplus
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 1830
rsakey                        = blablabla
boxkey                        = blablabla
ecmwhitelist                  = 92
detect                        = !cts
cardmhz                       = 357
mhz                           = 357
ident                         = 1830:000000,003411,008011
group                         = 1
emmcache                      = 1,3,2,0
blockemm-unknown              = 1
auprovid                      = 000001


[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
caid                          = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect                        = cd
ident                         = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group                         = 1
emmcache                      = 2,1,2,1
emu_auproviders               = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

 

[Phelbes]

Stell mal den Stinger auf 3.69 MHz ein.

Und hier dann

cardmhz = 369
mhz = 369

Oder lass den Eintrag mal weg.

 

[16v]

same...

Spoiler

[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) System name = Linux
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) Host name = fritz.box
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) Release = 3.10.12
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) Version = #2 SMP Fri Feb 24 14:49:45 CET 2017
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) Machine = mips
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 17175
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (emu) OSCam-Emu version 739
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) signal handling initialized
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (config) 4 provid's loaded
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (config) 159 service-id's loaded in 2 ms
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (config) 161 tier-id's loaded
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (net) cccam: initialized (fd=4, port=13000, ip=192.168.178.1)
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (reader) emulator [emu] creating thread for device emulator
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 s (main) waiting for local card init
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 00000000 (emu) INFO: FFDecsa parallel mode = 64
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 2C799144 h (webif) webif: decompressed 177921 bytes back into 438564 bytes
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 2C799144 h (webif) HTTP Server running. ip=192.168.178.1 port=83
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 5C112AE4 r (emu) Key file not found in: /var/media/ftp/uStor01/addon/oscam
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 5C112AE4 r (emu) Cannot open key file path: /var/keys
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 5C112AE4 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75195
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75183
[/LIST]
[LIST]
[*]2017/08/09 16:51:42 704015A8 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
[/LIST]
[LIST]
[*]2017/08/09 16:51:43 5C112AE4 r (reader) emulator [emu] card detected
[/LIST]
[LIST]
[*]2017/08/09 16:51:43 704015A8 r (reader) hdplus [mouse] card detected
[/LIST]
[LIST]
[*]2017/08/09 16:51:43 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75202
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 5C112AE4 r (reader) emulator [emu] found card system emu
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 5C112AE4 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 5C112AE4 r (emu) Key file not found in: /var/media/ftp/uStor01/addon/oscam
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 5C112AE4 r (emu) Cannot open key file path: /var/keys
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] ATR: 3F FF 94 00 FF 90 80 70 FF 47 00 44 4F 41 53 50 30 34 32 20 52 64 76 47 43 37
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] Init card protocol T0, FI=9, F=512, D=8, N=255
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] Setting baudrate to 57656 bps
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] Calculated work ETU is 17.34 us reader mhz = 369
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75183
[/LIST]
[LIST]
[*]2017/08/09 16:51:44 704015A8 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
[/LIST]
[LIST]
[*]2017/08/09 16:51:45 704015A8 r (reader) hdplus [mouse] card system not supported
[/LIST]
[LIST]
[*]2017/08/09 16:51:45 704015A8 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
[/LIST]
[LIST]
[*]2017/08/09 16:51:46 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75185
[/LIST]
[LIST]
[*]2017/08/09 16:51:47 704015A8 r (reader) hdplus [mouse] ATR: 3F FF 94 00 FF 90 80 71 FE 47 00 44 4E 40 53 50 31 34 32 20 52 65 77 47 43 36 60
[/LIST]
[LIST]
[*]2017/08/09 16:51:47 704015A8 r (reader) hdplus [mouse] Init card protocol T0, FI=9, F=512, D=8, N=255
[/LIST]
[LIST]
[*]2017/08/09 16:51:47 704015A8 r (reader) hdplus [mouse] Calculated work ETU is 100.81 us reader mhz = 369
[/LIST]
[LIST]
[*]2017/08/09 16:51:47 704015A8 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75157
[/LIST]
[LIST]
[*]2017/08/09 16:51:47 704015A8 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
[/LIST]
[LIST]
[*]2017/08/09 16:51:48 704015A8 r (reader) hdplus [mouse] card system not supported
[/LIST]
[LIST]
[*]2017/08/09 16:51:48 704015A8 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
[/LIST]
[LIST]
[*]2017/08/09 16:51:48 704015A8 r (reader) hdplus [mouse] card initializing error
[/LIST]
[LIST]
[*]2017/08/09 16:51:49 00000000 s (main) init for all local cards done
[/LIST]
[LIST]
[*]2017/08/09 16:51:49 00000000 s (anticasc) anti cascading disabled
[/LIST]
[LIST]
[*]2017/08/09 16:51:49 095AAED8 c (client) anonymous disconnected from 192.168.178.250
[/LIST]
[LIST]
[*]2017/08/09 16:51:53 0B620E7F c (client) encrypted cccam-client 192.168.178.250 granted (user, au=auto (2 reader))
[/LIST]

 

[Phelbes]

Versuche es mal mit einem USB Hub mit eigener Stromversorgung.

 

[16v]

der hängt direkt an der FritzBox.
kein Hub dazwischen!

 

[Phelbes]

Hub wäre aber evtl. besser??

Oder versuche es mit 450 MHz.

mhz = 450
cardmhz = 2700

 

[16v]

aso haste das gemeint!
Dachte du bist von ausgegangen, das ich eh schon einen hub dran habe.
Hab ne 7580. Aber wieso nen hub davor?

selbes spiel.
error activating Card
und
Card initializing error

 

[Phelbes]

Ja, dann weiss ich leider auch nicht weiter...

Wie sehen denn Deine Config Dateien aus?

 

[16v]

hm,... so n Schmarrn...
danke

 

[Phelbes]

Ich habe es mal auf meiner Dream mit Oscam getestet.
Es funktioniert, Card OK.

Versuche es mal mit diesen Configs:

Spoiler: Configs

Oscam.conf

[global]
logfile = /media/usb/oscam.log
nice = -1
maxlogsize = 2048
emmlogdir = /media/usb/EMM
lb_mode = 3
lb_save = 100
lb_savepath = /media/usb/oscam/stat
failbantime = 3600
failbancount = 10

[cache]

[newcamd]
port = portnr@1830:000000
key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dream800test
boxtype = dreambox

oscam.server:

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
boxkey = A7xxxxxxxxxxxxxxxx
rsakey = BF3xxxxxxxxxxxxxxx
detect = !cts
cardmhz = 357
mhz = 357
group = 6
emmcache = 1,1,2,0

Spoiler: Log

(reader) hdplus [nagra] Restarting reader

• 2017/08/09 20:23:38 29D2CCF2 h (reader) hdplus [nagra] creating thread for device /dev/ttyUSB0

• 2017/08/09 20:23:38 6B1310EA r (reader) hdplus [nagra] Buffers readed 0 bytes total time_us 75191

• 2017/08/09 20:23:38 6B1310EA r (reader) hdplus [nagra] Buffers readed 0 bytes total time_us 75176

• 2017/08/09 20:23:38 6B1310EA r (reader) hdplus [nagra] Reader initialized (device=/dev/ttyUSB0, detect=!cts, mhz=357, cardmhz=357)

• 2017/08/09 20:23:38 6B1310EA r (reader) hdplus [nagra] card detected

• 2017/08/09 20:23:38 6B1310EA r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75221

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] Setting baudrate to 111600 bps

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75197

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

• 2017/08/09 20:23:40 6B1310EA r (reader) hdplus [mouse] Card responded ok for ifsd request of 251

• 2017/08/09 20:23:41 6B1310EA r (reader) hdplus [mouse] detect native nagra card

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [mouse] ready for requests

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [mouse] found card system nagra

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] ROM: D N A S P 1 4 2

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] REV: R e v G C 6

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] SER: ############

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] CAID: 1830

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] Prv.ID: 00 00 00 00

2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] IRD ID: ############

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] active to: 2017/05/15 12:59

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] -----------------------------------------

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] |id |tier |valid from |valid to |

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] +----+--------+------------+------------+

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] |8011|0064 |2011/07/23 |2012/07/23 |

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] |8011|0BEA |2016/05/16 |2017/05/17 |

• 2017/08/09 20:23:42 6B1310EA r (reader) hdplus [nagra] -----------------------------------------

Was nicht passt musst Du anpassen.
Reader beide auf 3.69 MHz gestellt.

 

[16v]

Hab den jetzt gegen den Argolis Triple getauscht.
Mal sehen, wie der is...
Danke Euch für Eure Hilfe.

 

[Nino.73]

hii leute ich habe eine probleme ich will da udev rules eingeben aber klaptt nicht mit smartreader von argolis damit ich eine serial bekommen muss eine update machen au version 1.5 oder 17 das problem ist das ich das update nicht führen kann vieleid ligt an windows 10