Smargo Triple Reader

[topolino2]

Hi Leute

Habe mir einen Smargo Triple Smartreader angeschafft und habe folgende Probleme

Der Smartreader liest die SRG Karte einwandfrei ein, bei der HD02 Karte ist Feierabend. Habe schon gegoogelt und diverse Varianten ausprobiert

Ich vermute denn Fehler in den Smartreader2tools bei der Einstellung T1 anstatt TO und hier liegt das 2te Problem.

Unter Linux kommt beim Aufruf der Smartreader2tools immer die Fehlermeldung Datei oder Verzeichnis nicht gefunden. Datei Ist aber im richtigen Ordner. Bin als SU angemeldet und die Rechte wurden auf 777 gesetzt

Unter Windows 10 wird der Reader im Geraetemanager angezeigt aber wenn ich mit der Smartreader.exe die Einstellungen aufrufen oder veraendern will kommt die Fehlermeldung Smartreader error

System:

Linux 14.04 LTS Server
Smargo Triple
PC mit Windows 10

Ausschnitt Log File unter Oscam

Spoiler

2017/04/02 16:13:36 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] Buffers readed 0 bytes total time_us 75224
2017/04/02 16:13:36 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.00 MHz (specified in reader->mhz)
2017/04/02 16:13:38 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] Warning: Card returned error on setting ifsd value to 28
2017/04/02 16:13:38 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] card system not supported
2017/04/02 16:13:38 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/04/02 16:13:38 5ABD0A2F r (reader) hdplus-schwarze-Karte(MOUSE) [mouse] card initializing error

OSCAM Server

Spoiler

[reader]
label = hdplus-schwarze-Karte(MOUSE)
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 1843
boxkey = AXXXC
rsakey = XXX
detect = cd
mhz = 300
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
cccreshare = 1

Hatte schon jemand Aehnliche Probleme

Besten Dank fuer Eure Feedbacks

 

[czutok]

kein wunder das du damit problemme hast , wenn du solche einträge drine hast

mhz = 300
cardmhz = 2700

mach mal
mhz = 480
cardmhz = 369

2700 ist für interne reader in recivier gedacht

 

[supraracer]

Ich habe kein Triple, aber muss das nicht eher so aussehen?
protocol = smartreader
device = TripleP1;Serial:0000028a

protocol = smartreader
device = TripleP2;Serial:0000028a

protocol = smartreader
device = TripleP3;Serial:0000028a

Man liest über das Teil ja insgesamt nichts so gutes, ich denke mit drei einzelnen Reader bist du besser dran.
Je nach Karte auch mal nach der Easymouse, Apollo, Omnikey, ... schauen. ;-)

-supraracer

 

[topolino2]

Habe die Frequenz geändert LOg File sieht so aus

Spoiler

• 2017/04/02 18:56:47 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Buffers readed 0 bytes total time_us 75121

• 2017/04/02 18:56:47 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

• 2017/04/02 18:56:47 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] card detected

• 2017/04/02 18:56:52 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:56:52 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:56:52 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 18:56:52 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:56:53 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:56:54 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] detect native nagra card

• 2017/04/02 18:56:55 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 18:56:56 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] T1 Resync command error, trying to reactivate!

• 2017/04/02 18:57:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:57:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:57:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 18:57:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:57:02 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:57:03 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 18:57:04 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] T1 Resync command error, trying to reactivate!

• 2017/04/02 18:57:09 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:57:09 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:57:09 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 18:57:09 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:57:10 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:57:10 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] card system not supported

• 2017/04/02 18:57:10 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Normal mode failed, reverting to Deprecated Mode

• 2017/04/02 18:57:15 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:57:15 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:57:15 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 69.66 us reader mhz = 534

• 2017/04/02 18:57:15 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:57:17 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:57:18 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] detect native nagra card

• 2017/04/02 18:57:20 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 18:57:21 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] T1 Resync command error, trying to reactivate!

• 2017/04/02 18:57:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:57:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:57:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 18:57:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:57:27 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:57:28 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 18:57:29 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] T1 Resync command error, trying to reactivate!

• 2017/04/02 18:57:34 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 18:57:34 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 18:57:34 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 18:57:34 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/04/02 18:57:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 18:57:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] card system not supported

• 2017/04/02 18:57:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

• 2017/04/02 18:57:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smargo] card initializing error

 

[topolino2]

Habe auch noch die Variante von supraracer eingebaut

LogFile

Spoiler

(reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Reader initialized (device=TripleP1;Serial:00000d99, detect=cd, mhz= AUTO, cardmhz=369)

• 2017/04/02 19:02:56 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] card detected

• 2017/04/02 19:03:00 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 19:03:00 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 19:03:00 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 19:03:00 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD

• 2017/04/02 19:03:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)

• 2017/04/02 19:03:01 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Card responded ok for ifsd request of 160

• 2017/04/02 19:03:02 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] detect native nagra card

• 2017/04/02 19:03:05 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 19:03:07 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] T1 Resync command error, trying to reactivate!

• 2017/04/02 19:03:11 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 19:03:11 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 19:03:11 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 19:03:11 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD

• 2017/04/02 19:03:12 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)

• 2017/04/02 19:03:12 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Card responded ok for ifsd request of 160

• 2017/04/02 19:03:12 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] card system not supported

• 2017/04/02 19:03:12 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Normal mode failed, reverting to Deprecated Mode

• 2017/04/02 19:03:16 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 19:03:16 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 19:03:16 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Calculated work ETU is 69.66 us reader mhz = 534

• 2017/04/02 19:03:16 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD

• 2017/04/02 19:03:17 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)

• 2017/04/02 19:03:18 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Warning: Card returned error on setting ifsd value to 160

• 2017/04/02 19:03:19 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] detect native nagra card

• 2017/04/02 19:03:20 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 19:03:21 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] T1 Resync command error, trying to reactivate!

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)

• 2017/04/02 19:03:26 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Card responded ok for ifsd request of 160

• 2017/04/02 19:03:30 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/04/02 19:03:31 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] T1 Resync command error, trying to reactivate!

• 2017/04/02 19:03:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28

• 2017/04/02 19:03:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/04/02 19:03:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/04/02 19:03:35 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD

• 2017/04/02 19:03:36 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)

• 2017/04/02 19:03:36 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] Card responded ok for ifsd request of 160

• 2017/04/02 19:03:36 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] card system not supported

• 2017/04/02 19:03:36 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

• 2017/04/02 19:03:36 477D2A1E r (reader) hdplus-schwarze-Karte(MOUSE) [smartreader] card initializing error

OSCAM SERVER

Spoiler

[reader]
label = hdplus-schwarze-Karte(MOUSE)
protocol = smartreader
#device = /dev/ttyUSB0
device = TripleP1;Serial:00000d99
#smargopatch = 1
caid = 1843
boxkey = A76XXC
rsakey = XXX
detect = cd
mhz = 480
cardmhz = 369
group = 1
emmcache = 1,3,2,0
cccreshare = 1

Ich vermute das Problem liegt daran das ich mit smartreader2tool ob PC oder Linux den WERT T nicht auf 1 setzen kann

Bein Linux gebe ich folgenden Befehl für das Tool ein ./smartreader2tool danach kommt die Fehlermeldung Verzeichnis oder Datei nicht gefunden. Rechte sind auf 777 und die Datei ist im Verzeichnis.

P RO B L E M GE L ö S T

Hier die Oscam Server

Spoiler

[reader]
label = hdplus-schwarze-Karte(MOUSE)
protocol = smartreader
device = TripleP1;Serial:00000d99
smargopatch = 1
caid = 1843
boxkey = A76XXC
rsakey = XX
detect = cd
mhz = 480
cardmhz = 369
group = 1
emmcache = 1,3,2,0
cccreshare = 1

Danke Euch für die Tipps in der Kombination gings dann

 

[supraracer]

Mach mal so:

mhz                           = 369
cardmhz                       = 369

EDIT:
Auch mal explizit autospeed deaktivieren im Reader:

autospeed                     = 0

Nach den Änderungen unbedingt OScam neu starten.

-supraracer