AW: HOW TO - SkyItalia + TivuSat + SkyDE - 3 Smargo + USB Hub!
ciao sonic !
sono arrivato fino a qua ! ma ancora non ho visione ....
dmesg prima di start Oscam:
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbserial_generic 1-2.1:1.0: usb_probe_interface
usbserial_generic 1-2.1:1.0: usb_probe_interface - got id
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C
Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infr
ared Tranceiver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electron
ics TIRA-1 IR Transceiver
ftdi_sio 1-2.1:1.0: usb_probe_interface
ftdi_sio 1-2.1:1.0: usb_probe_interface - got id
ftdi_sio 1-2.1:1.0: FTDI FT232BM Compatible converter detected
usb 1-2.1: FTDI FT232BM Compatible converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.2:USB FTDI Serial Converters Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
OSCAM config
[global]
Nice = -1
LogFile = stdout
waitforcards = 1
cachedelay = 120
preferlocalcards = 1
[newcamd]
key = 0102030405060708091011121314
port = 35000@093b:000000; 35500@183d:005411
[webif]
httpport = 16666
httpuser = oscam
httppwd = oscam
Httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
server
[reader]
Label = SkyItalia
Protocol = mouse
#Detect = cd
Device = /dev/ttyUSB0
group = 1
BoxID = xxxxxxxx
EMMCache = 1,1,2
[reader]
label = Tivusat
protocol = internal
detect = CD
device = /dev/sci0
group = 2
tiger_rsakey = A......
user
[account]
User =
Pwd =
group = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 4
[account]
User =
Pwd =
group = 2
caid = 183d
ident = 183d:005411
AU = Tivusat
monlevel = 4
log dmesg dopo start oscam:
root@
dm800:~# dmesg
b/serial/ftdi_sio.c: ftdi_set_termios FAILED to set databits/stopbits/parity
drivers/usb/serial/ftdi_sio.c: ftdi_set_termios urb failed to set baurdrate
drivers/usb/serial/ftdi_sio.c: urb failed to clear flow control
drivers/usb/serial/ftdi_sio.c: ftdi_tiocmget Could not get modem status of devic
e - err: -19
settagio smargo:
fix
5.33mHz
dreambox
o
o
smargo con fw 1.04
CCcam 2.1.4
oscam svn 1995
gemini image
dm 800 hd
l log mi da questo adesso
17:47:39.125 CCcam: card init fail
17:47:40.447 CCcam: /dev/sci0 configured clock frequency: 3570000 Hz
17:47:40.558 CCcam: nds card found
17:47:41.025 CCcam: card init fail
17:47:41.584 CCcam: local ecm -> card /dev/usb/tts/0 0x93b(0x000) sid 0x2b5d
17:47:41.748 CCcam: local ecm <- card /dev/usb/tts/0 error
17:47:41.749 CCcam: newcamd ecm -> 192.168.0.169:35000
17:47:41.778 CCcam: newcamd ecm <- 192.168.0.169:35000 error (took 0.0292 second
s)
17:47:41.779 CCcam: cam[0] ecm even nok caid:0x93b id:0x0 pid:0x6a4 SKY Italia (
13E) [NS] (took 0.1955 seconds)
17:47:41.886 CCcam: local ecm -> card /dev/usb/tts/0 0x93b(0x000) sid 0x2b5d
17:47:41.886 CCcam: local ecm <- card /dev/usb/tts/0 failure from cache
17:47:41.887 CCcam: newcamd ecm -> 192.168.0.169:35000
17:47:41.888 CCcam: newcamd ecm <- 192.168.0.169:35000 failure from cache (took
0.0005 seconds)
di come ho capito io adesso la carta viene riconosciuta nell smargo ma mi da errore !
e la tivu sat nello slot interno ha anche un errore.
cosa posso cambiare ancora?
la cosa che non capisco e che perche il log del dmseg mi da ttyUSB0
e il log della oscam mi sa ttsUSB0 ?
ha forse a che fare che uso un USB switsch (hub)?