S02 und HD02 werden nicht hell

[RvM]

Ich werde demnächst auf V14 umgestellt und wollte vorher auf OSCam umstellen, damit mein TV nicht allzulange dunkel bleibt.

Zur Info hier meine aktuelle Konfiguration:
Dreambox 8000 (Hauptreceiver), Dreambox 500HD (Schlafzimmer)
Die 8000er hat das aktuelle Gemini 3.2, basierend auf dem OE2.0
Ich habe eine alte S02 im oberen Schacht, eine HD+ (HD02) im unteren Schacht.
Als OSCam habe ich mir über den camfeed die Version 1.20 svn9555-788
Und so sehen meine Konfigurationsdateien an - die Inhalte habe ich aus von hier:

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
clienttimeout = 15000 # (für Kartenaktivierung evtl. Änderung des Wertes nötig)
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
password = local
decodeforever = 1

[webif]
httpport = 8888
httpuser = xxx
httppwd = xxxx
httprefresh = 30
httpallowed = 172.16.0.0-172.16.0.255

oscam.server

Spoiler

[reader]
label = skyS02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1702,1833
detect = cd
mhz = 2700
cardmhz = -1
autospeed = 1
group = 1
emmcache = 1,1,2

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = xxx (Google hat geholfen)
boxkey = xxx (Google hat geholfen)
detect = cd
cardmhz = 2700
autospeed = 1
group = 2
emmcache = 1,3,2
lb_weight = 100

oscam.user

Spoiler

user = local
password = local
group = 1,2
au = skyS02,hdplus
betatunnel = 1833.FFFF:1702

Und das gibt mir das WebIf als Meldung

Spoiler

2014/08/30 16:45:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/08/30 16:46:17 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/08/30 16:46:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 15552
2014/08/30 16:46:17 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/30 16:46:17 0 s signal handling initialized
2014/08/30 16:46:17 0 s skyS02 [internal] creating thread for device /dev/sci1
2014/08/30 16:46:17 0 s hdplus [internal] creating thread for device /dev/sci0
2014/08/30 16:46:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/30 16:46:17 0 s waiting for local card init
2014/08/30 16:46:17 5DD6B0 r skyS02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=-1)
2014/08/30 16:46:17 5DF3B0 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/30 16:46:17 77100468 h webif: decompressed 69662 bytes back into 195704 bytes
2014/08/30 16:46:17 77100468 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/30 16:46:43 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:43 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:44 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:45 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/30 16:46:45 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:45 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:45 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:45 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:46 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/30 16:46:46 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:46 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:46 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:46 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:47 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/30 16:46:48 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:48 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:48 77104330 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A52 PMTPID 0061 (NO MATCHING READER)
2014/08/30 16:46:48 77104330 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/30 16:46:48 77104330 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Wo liegt der Fehler?

P.S.: Danke vorab für eure Bemühungen und Hilfen

 

[supraracer]

AW: S02 und HD02 werden nicht hell

Leg dir mal noch ne oscam.dvbapi an mit Inhalt:
P:1830
P:1702
I:0

-supraracer

 

[dodo83]

AW: S02 und HD02 werden nicht hell

hi,
änder mal ab
- der Parameter Passwort hat da nichts zu suchen, gehört nicht hier rein

Spoiler

[COLOR=#333333][dvbapi][/COLOR]
[COLOR=#333333]enabled = 1[/COLOR]
[COLOR=#333333]au = 1[/COLOR]
[COLOR=#333333]boxtype = dreambox[/COLOR]
[COLOR=#333333]user = local[/COLOR]

im Reader
- die RSA/BOXKEY sind aber vorhanden für die HDplus

Spoiler

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = skyS02[/COLOR]
[COLOR=#3E3E3E]enable = 1[/COLOR]
[COLOR=#3E3E3E]protocol = internal[/COLOR]
[COLOR=#3E3E3E]device = /dev/sci1[/COLOR]
[COLOR=#3E3E3E]caid = 1702,1833[/COLOR]
[COLOR=#3E3E3E]detect = cd[/COLOR]
[COLOR=#3E3E3E]mhz = 357[/COLOR]
[COLOR=#3E3E3E]cardmhz = 2700[/COLOR]
[COLOR=#3E3E3E]autospeed = 1[/COLOR]
[COLOR=#3E3E3E]group = 1[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = hdplus[/COLOR]
[COLOR=#3E3E3E]protocol = internal[/COLOR]
[COLOR=#3E3E3E]device = /dev/sci0[/COLOR]
[COLOR=#3E3E3E]caid = 1830[/COLOR]
[COLOR=#3E3E3E]rsakey = xxx (Google hat geholfen)[/COLOR]
[COLOR=#3E3E3E]boxkey = xxx (Google hat geholfen)[/COLOR]
[COLOR=#3E3E3E]detect = cd
[/COLOR]mhz = 368
[COLOR=#3E3E3E]cardmhz = 2700[/COLOR]
[COLOR=#3E3E3E]autospeed = 1[/COLOR]
[COLOR=#3E3E3E]group = 2[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]
[COLOR=#3E3E3E]lb_weight = 100[/COLOR]

User
-hier fehlt der [account]

Spoiler

[account]
[COLOR=#3E3E3E]user = local[/COLOR]
[COLOR=#3E3E3E]pwd =[/COLOR]
[COLOR=#3E3E3E]group = 1,2[/COLOR]
[COLOR=#3E3E3E]au = skyS02,hdplus [/COLOR]
[COLOR=#3E3E3E]betatunnel = 1833.FFFF:1702[/COLOR]

oscam neu starten
log bitte vom Start posten

EDIT
oben im log werden gar nicht die Karten erkannt, diese sind richtig rum in den Slots?

 

[RvM]

AW: S02 und HD02 werden nicht hell

Die beiden Karten werden erkannt und stecken richtig drin, denn mit CCCam läuft die Ganze Sache ja einwandfrei.

Hier nun das Protokoll nach Änderungen der Dateien und Neustart von OSCAM

Spoiler

2014/08/30 18:24:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/08/30 18:24:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 23354
2014/08/30 18:24:03 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/30 18:24:03 0 s signal handling initialized
2014/08/30 18:24:03 0 s skyS02 [internal] creating thread for device /dev/sci1
2014/08/30 18:24:03 0 s hdplus [internal] creating thread for device /dev/sci0
2014/08/30 18:24:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/30 18:24:03 0 s waiting for local card init
2014/08/30 18:24:03 AA86B0 r skyS02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=-1)
2014/08/30 18:24:03 AAA3B0 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/30 18:24:03 AA86B0 r skyS02 [internal] card detected
2014/08/30 18:24:03 77200468 h webif: decompressed 69662 bytes back into 195704 bytes
2014/08/30 18:24:03 77200468 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/30 18:24:04 AAA3B0 r hdplus [internal] card detected
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] TEST tempo mhz check = 500 mhz
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/30 18:24:05 AAA3B0 r hdplus [internal] Card responded ok for ifsd request of 160
2014/08/30 18:24:05 AA86B0 r skyS02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/08/30 18:24:05 AA86B0 r skyS02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/08/30 18:24:05 AA86B0 r skyS02 [internal] Calculated work ETU is 20.67 us reader mhz = 2700
2014/08/30 18:24:05 AA86B0 r skyS02 [internal] ATR Fsmax is 6 MHz, clocking card to 27.00 (specified in reader->mhz)
2014/08/30 18:24:06 AAA3B0 r hdplus [internal] detect native nagra card
2014/08/30 18:24:06 AA86B0 r skyS02 [internal] detect irdeto tunneled nagra card
2014/08/30 18:24:06 AA86B0 r skyS02 [internal] no rsa key configured -> using irdeto mode
2014/08/30 18:24:06 AA86B0 r skyS02 [internal] detect irdeto card
2014/08/30 18:24:12 AAA3B0 r hdplus [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/08/30 18:24:12 AAA3B0 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/30 18:24:12 AA86B0 r skyS02 [internal] detect irdeto tunneled nagra card
2014/08/30 18:24:12 AA86B0 r skyS02 [internal] no rsa key configured -> using irdeto mode
2014/08/30 18:24:12 AA86B0 r skyS02 [internal] detect irdeto card
2014/08/30 18:24:13 AA86B0 r skyS02 [internal] card system not supported
2014/08/30 18:24:13 AA86B0 r skyS02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/30 18:24:13 AA86B0 r skyS02 [internal] card initializing error
2014/08/30 18:24:14 AAA3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/30 18:24:15 AAA3B0 r hdplus [internal] detect native nagra card
2014/08/30 18:24:16 AAA3B0 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/30 18:24:17 AAA3B0 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] TEST tempo mhz check = 500 mhz
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/30 18:24:19 AAA3B0 r hdplus [internal] Card responded ok for ifsd request of 160
2014/08/30 18:24:21 AAA3B0 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/30 18:24:22 AAA3B0 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] TEST tempo mhz check = 500 mhz
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] Card responded ok for ifsd request of 160
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] card system not supported
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/30 18:24:23 AAA3B0 r hdplus [internal] card initializing error
2014/08/30 18:24:24 0 s init for all local cards done
2014/08/30 18:24:24 0 s anti cascading disabled
2014/08/30 18:24:24 AB3290 c plain dvbapi-client granted (local, au=on (2 reader))
2014/08/30 18:24:24 AB3290 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/30 18:24:26 AB3290 c [DVBAPI] Receiver sends PMT command 3 for channel 283D
2014/08/30 18:24:26 AB3290 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
2014/08/30 18:24:26 AB3290 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/08/30 18:24:26 AB3290 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
2014/08/30 18:24:26 AB3290 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]

 

[supraracer]

AW: S02 und HD02 werden nicht hell

Deine OScam ist zu alt und daher passen deine Configs teilweise nicht. Zieh mal die aktuelle drauf, dann sollte es gehen.

-supraracer

 

[RvM]

AW: S02 und HD02 werden nicht hell

Das Problem ist, wenn ich mir eine neue ziehe und die nach Vorlage installiere, dann komm ich erst gar nicht auf das WebIf. Die installierte ist ca, 900 KB gross die neuen alle nur ca. 450 KB groß. Was mache ich denn da falsch?

Ich hatte mir z.B. folgende runtergeladen
oscam-svn9842-mips-tuxbox-oe2.0-webif-libusb-Distribution.tar.gz
und diese dann entpackt und auf die Box gepackt. Dann im BP die Cam neu gestartet, aber auf das WebIF kam ich gar nicht drauf

 

[Tengri3108]

AW: S02 und HD02 werden nicht hell

Hi

Was heißt nicht drauf? Dann läuft die nicht oder deine conf passt nicht um dich zu verbinden.

Gruß Ralf

 

[RvM]

AW: S02 und HD02 werden nicht hell

Wenn ich die Datei "oscam" auf der Dream in das Verzeichnis "usr/bin" entpackt habe, sie umgenannt in "oscam_1.20" und die Rechte auf "755" gesetzt habe, erkennt die Box gar nicht, das es jetzt auch OSCam gibt. Wenn ich die OSCam aber über den camfeed installiere dann erkennt die Box über BP das es die OSCam gibt und ich kann sie auswählen, starten und über das WebIF zugreifen.

Wo finde ich denn die Startscripts zur richtigen Installatin?

 

[Todessehnsucht]

AW: S02 und HD02 werden nicht hell

Normalerweise ist das Startscript für die OSCAM 1.20 ja schon angelegt. Installier einfach die Oscam vom Feed. Dann tauscht du einfach die oscam.bin. Entpacke sie aber am PC und schreib sie dann auf die Dream. Dann sollte sie auch im BP auftauchen.

 

[RvM]

AW: S02 und HD02 werden nicht hell

Aktueller Status:
Ich habe per Script die alte Version installiert und dann - wie hier beschrieben - die Datei oscam_1.20 gelöscht und die aktuelle Version "oscam-svn9842-mips-tuxbox-oe2.0-webif-libusb-Distribution" vom 29.08.2014 entpackt, ind das entsprechende Verzeichnis geschoben, Leserechte auf 755 gesetzt und die Cam neu gestartet.
Leider werden weiterhin als Error "ERROR

Sie müssen registriert sein, um Links zu sehen.

" angezeigt.
Und so sieht nach dem Neustart das Live Log aus:

Spoiler

• 2014/08/31 13:03:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9836 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
• 2014/08/31 13:03:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 25265
• 2014/08/31 13:03:47 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/08/31 13:03:47 0 s signal handling initialized
• 2014/08/31 13:03:47 0 s skyS02 [internal] creating thread for device /dev/sci1
• 2014/08/31 13:03:47 0 s hdplus [internal] creating thread for device /dev/sci0
• 2014/08/31 13:03:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/08/31 13:03:47 0 s waiting for local card init
• 2014/08/31 13:03:47 76B026A8 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
• 2014/08/31 13:03:47 76B00738 r skyS02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=-1)
• 2014/08/31 13:03:47 5EF938 h webif: decompressed 154648 bytes back into 365608 bytes
• 2014/08/31 13:03:47 5EF938 h HTTP Server running. ip=0.0.0.0 port=8888
• 2014/08/31 13:03:48 76B00738 r skyS02 [internal] card detected
• 2014/08/31 13:03:48 76B026A8 r hdplus [internal] card detected
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 13:03:49 76B026A8 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 13:03:50 76B026A8 r hdplus [internal] detect native nagra card
• 2014/08/31 13:03:51 76B00738 r skyS02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2014/08/31 13:03:51 76B00738 r skyS02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2014/08/31 13:03:51 76B00738 r skyS02 [internal] Calculated work ETU is 20.67 us reader mhz = 2700
• 2014/08/31 13:03:51 76B00738 r skyS02 [internal] ATR Fsmax is 6 MHz, clocking card to 27.00 (specified in reader->mhz)
• 2014/08/31 13:03:52 76B00738 r skyS02 [internal] detect irdeto tunneled nagra card
• 2014/08/31 13:03:52 76B00738 r skyS02 [internal] no rsa key configured -> using irdeto mode
• 2014/08/31 13:03:52 76B00738 r skyS02 [internal] detect irdeto card
• 2014/08/31 13:03:52 76B00738 r skyS02 [internal] card system not supported
• 2014/08/31 13:03:52 76B00738 r skyS02 [internal] Normal mode failed, reverting to Deprecated Mode
• 2014/08/31 13:03:53 76B026A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 13:03:54 76B026A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 13:03:55 76B00738 r skyS02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
• 2014/08/31 13:03:55 76B00738 r skyS02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
• 2014/08/31 13:03:55 76B00738 r skyS02 [internal] Calculated work ETU is 13.78 us reader mhz = 2700
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2014/08/31 13:03:55 76B00738 r skyS02 [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] card system not supported
• 2014/08/31 13:03:55 76B026A8 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] detect irdeto tunneled nagra card
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] no rsa key configured -> using irdeto mode
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] detect irdeto card
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] card system not supported
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/08/31 13:03:56 76B00738 r skyS02 [internal] card initializing error
• 2014/08/31 13:03:56 76B026A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 13:03:56 76B026A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 13:03:56 76B026A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 13:03:56 76B026A8 r hdplus [internal] Calculated work ETU is 82.67 us reader mhz = 450
• 2014/08/31 13:03:56 76B026A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 13:03:58 76B026A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 13:03:59 76B026A8 r hdplus [internal] detect native nagra card
• 2014/08/31 13:04:00 76B026A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 13:04:02 76B026A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 13:04:03 76B026A8 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 13:04:05 76B026A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 13:04:06 76B026A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] card system not supported
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/08/31 13:04:08 76B026A8 r hdplus [internal] card initializing error
• 2014/08/31 13:04:08 0 s init for all local cards done
• 2014/08/31 13:04:08 0 s anti cascading disabled
• 2014/08/31 13:04:08 76B04618 c plain dvbapi-client granted (local, au=on (2 reader))
• 2014/08/31 13:04:08 76B04618 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2014/08/31 13:04:10 76B04618 c Found 0 ECMpids and 9 STREAMpids in PMT
• 2014/08/31 13:04:10 76B04618 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
• 2014/08/31 13:04:10 76B04618 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]

Was tun?

 

[supraracer]

AW: S02 und HD02 werden nicht hell

Karten werden nach wie vor nicht richtig gelesen. Läuft im Hintergrund evtl. parallel noch CCcam mit und blockt die Reader?

-supraracer

 

[dodo83]

AW: S02 und HD02 werden nicht hell

hier

2014/08/31 13:03:47 76B00738 r skyS02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=2700, cardmhz=-1

hast du die änderung immer noch nicht vogenommen

mhz = 1
cardmhz = 2700

oder

mhz = 368
cardmhz = 2700

 

[RvM]

AW: S02 und HD02 werden nicht hell

@supraracer: Ich habe die CCCam natürloch noch auf der Box, denn sonst könnte ich ja weder sky noch HD+ schauen. Ich dachte aber immer, das beim Wechsel der Cam die andere automatisch abgeschaltet wird. Wenn nicht, wie kann ich die denn stoppen?
@dodo83: sorry, der Fehler steckt noch drin. Da ich aber z.Zt von sky was aufnehme, werde ich das danach einspielen und neu testen.

UPDATE:
So, nach der Korrektur der server Datei sieht der Log wie folgt aus:

Spoiler

• 2014/08/31 18:17:55 77DE68 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 18:17:57 77DE68 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 18:17:58 77DE68 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] TEST tempo mhz check = 500 mhz
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] card system not supported
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/08/31 18:18:00 77DE68 r hdplus [internal] card initializing error
• 2014/08/31 18:18:00 0 s init for all local cards done
• 2014/08/31 18:18:00 0 s anti cascading disabled
• 2014/08/31 18:18:00 78F038 c plain dvbapi-client granted (local, au=on (2 reader))
• 2014/08/31 18:18:00 78F038 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2014/08/31 18:18:02 78F038 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEC PROVID: 000000
• 2014/08/31 18:18:02 78F038 c [ADD PID 1] CAID: 1843 ECM_PID: 19EC PROVID: 000000
• 2014/08/31 18:18:02 78F038 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
• 2014/08/31 18:18:02 78F038 c [ADD PID 3] CAID: 098C ECM_PID: 1AEC PROVID: 000000
• 2014/08/31 18:18:02 78F038 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEC PROVID: 000000
• 2014/08/31 18:18:02 78F038 c Found 5 ECMpids and 5 STREAMpids in PMT
• 2014/08/31 18:18:02 78F038 c [DVBAPI] Receiver wants to demux srvid EF75 on adapter 0000 camask 0008 index 0003 pmtpid 0061
• 2014/08/31 18:18:02 78F038 c New program number: EF75 (1830:EF75 unknown) [pmt_list_management 3]
• 2014/08/31 18:18:02 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:02 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:03 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:03 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:03 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:03 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:04 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:04 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:04 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:05 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:05 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:05 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:06 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:06 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:06 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:06 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:07 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:07 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:07 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:08 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:08 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:08 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:09 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:09 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:09 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:09 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:10 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:10 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:10 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:11 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:11 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:11 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:12 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:12 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:12 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:13 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:13 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:13 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:13 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:14 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:14 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:14 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:15 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:15 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:15 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:16 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:16 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:16 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:16 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:17 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:17 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:17 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:18 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:18 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/08/31 18:18:18 78F038 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/31 18:18:19 78F038 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

Was ist in der dvbapi denn falsch, das die Karten nicht richtig erkannt werden?

Spoiler

P: 1702
P: 1830
I:0

LG Rolf

 

[supraracer]

AW: S02 und HD02 werden nicht hell

Die oscam.dvbapi hat nichts mit dem Erkennen der Karte zu tun. Ich würde an deiner Stelle versuchen die Karten nacheinander zum Laufen zu bekommen. Zieh mal die HD02 komplett raus, deaktiviere den Reader und bekomm die S02 ans rennen, dann gibts auch nicht so viel Chaos im Log.
Ein halbwegs gescheites Image sollte eigentlich beim Cam wechsel über das Menü die andere Cam deaktivieren, ja. Ob das deins so macht weiß ich nicht, aber eventuell mal über Telnet/SSH auf die Box gehen und via 'ps -ef' nachschauen zur Sicherheit.

-supraracer

 

[RvM]

Was mich nur wundert ist, das ich bei mir bei der Auswahl der Cams nicht nur CCCam 2.3.0 und OSCam 1.20 stehen habe sondern noch zusätzlich OSCam 1.20/CCCam 2.3.0. Was hat das zu bedeuten?

HURRA!!! Erstes Erfolgserlebnis!!
Nach dem Herausnehmen der HD+ Einstellung in der Server Datei läuft die S02!!
Aber warum zeigt mir das WebIF beim Status "CARDOK (no entitlements)" an? Wo finde ich die den?


UPDATE:
Nach diversen Recherchen hatte ich die RSA/Boxkeys vertauscht, sie müssten jetzt richtig sein.
So sieht nun der HD02 Teil in der server Datei aus:

Spoiler

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF..D5
boxkey = A7..7C
detect = cd
mhz = 369
cardmhz = 368
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2
auprovid = 003411

Und das gibt mir jetzt das Log aus:

Spoiler

• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 044C, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 00F5, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0069, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0102, date: 2008/10/04 - 2008/10/20
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 026C, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028B, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028C, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028D, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028E, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028F, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0290, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029E, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0291, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0292, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0293, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0294, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9DB3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 21:45:07 9DB3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 21:45:07 9DB3B0 r hdplus [internal] Calculated work ETU is 8.67 us reader mhz = 369
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0295, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 028A, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0298, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0299, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029A, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029B, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029D, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 0103, date: 2008/10/04 - 2008/10/20
• 2014/08/31 21:45:07 9D9580 r skyS02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:07 9DB3B0 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 0104, date: 2008/10/04 - 2008/10/20
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 0105, date: 2008/10/04 - 2008/10/20
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 05F1, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 05DE, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 0276, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 05F5, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 05E7, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] chid: 05E8, date: 2013/11/28 - 2014/08/09
• 2014/08/31 21:45:08 9D9580 r skyS02 [irdeto] ready for requests
• 2014/08/31 21:45:09 9DB3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 21:45:11 9DB3B0 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 21:45:13 9DB3B0 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 21:45:14 9DB3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 21:45:14 9DB3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 21:45:14 9DB3B0 r hdplus [internal] Calculated work ETU is 8.67 us reader mhz = 369
• 2014/08/31 21:45:14 9DB3B0 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
• 2014/08/31 21:45:16 9DB3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 21:45:16 9DB3B0 r hdplus [internal] card system not supported
• 2014/08/31 21:45:16 9DB3B0 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
• 2014/08/31 21:45:17 9DB3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 21:45:17 9DB3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 21:45:17 9DB3B0 r hdplus [internal] Calculated work ETU is 100.81 us reader mhz = 369
• 2014/08/31 21:45:17 9DB3B0 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
• 2014/08/31 21:45:19 9DB3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 21:45:20 9DB3B0 r hdplus [internal] detect native nagra card
• 2014/08/31 21:45:22 9DB3B0 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 21:45:24 9DB3B0 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 21:45:25 9DB3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 21:45:25 9DB3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 21:45:25 9DB3B0 r hdplus [internal] Calculated work ETU is 8.67 us reader mhz = 369
• 2014/08/31 21:45:25 9DB3B0 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
• 2014/08/31 21:45:27 9DB3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 21:45:29 9DB3B0 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/08/31 21:45:30 9DB3B0 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/08/31 21:45:32 9DB3B0 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/08/31 21:45:32 9DB3B0 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/08/31 21:45:32 9DB3B0 r hdplus [internal] Calculated work ETU is 8.67 us reader mhz = 369
• 2014/08/31 21:45:32 9DB3B0 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.69 (specified in reader->mhz)
• 2014/08/31 21:45:34 9DB3B0 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/08/31 21:45:34 9DB3B0 r hdplus [internal] card system not supported
• 2014/08/31 21:45:34 9DB3B0 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/08/31 21:45:34 9DB3B0 r hdplus [internal] card initializing error
• 2014/08/31 21:45:34 0 s init for all local cards done
• 2014/08/31 21:45:34 0 s anti cascading disabled
• 2014/08/31 21:45:34 9E3650 c plain dvbapi-client granted (local, au=on (2 reader))
• 2014/08/31 21:45:34 9E3650 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2014/08/31 21:45:37 9E3650 c Found 0 ECMpids and 9 STREAMpids in PMT
• 2014/08/31 21:45:37 9E3650 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
• 2014/08/31 21:45:37 9E3650 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]

Was ist da falsch?