S02 in neuerer oscam läuft nicht

[M0rph]

Hallo Zusammen,

ich habe versucht, von einer uralten Oscam Version auf eine neue umzusteigen.
Die S02 steckt in einem Smargo direkt an der 7170 mit neuem CI Image (freetz-devel-12947M) und neuer Oscam 1.2 build 10652.

Ich bekomme im Logfile immer den Fehler 'ERROR: Could not read reader->convention'.
An den Smargo Einstellungen habe ich nichts verändert. Ansonsten habe ich mir Beispiel Konfigs aus dem Forum zusammengesucht und diverse ausprobiert...

Wahrscheinlich seht ihr den Fehler sofort, ich bin mit meinem Latein am Ende...

Hier mal die Configs:

oscam.server

Spoiler

[reader]
label = S02
protocol = mouse
device = /dev/ttyUSB0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

oscam.conf

Spoiler

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[webif]
HttpPort = 61403
HttpUser = admin
HttpPWD =
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 0

[dvbapi]
Enabled = 1
Boxtype = coolstream
User = DVBApi
decodeforever = 1
AU = 1

oscam.user

Spoiler

[account]
user = DVBApi
au = 1
group = 3

logfile

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:11:56 2000
-------------------------------------------------------------------------------
2000/01/01 01:11:56 0 s >> OSCam << cardserver started, version 1.20-emu, build r10652 (mipsel-linux-uclibc-libusb)
2000/01/01 01:11:56 0 s (main) System name = Linux
2000/01/01 01:11:56 0 s (main) Host name = fritz.fonwlan.box
2000/01/01 01:11:56 0 s (main) Release = 2.6.13.1-ohio
2000/01/01 01:11:56 0 s (main) Version = #1 Wed Jan 21 16:48:51 CET 2015
2000/01/01 01:11:56 0 s (main) Machine = mips
2000/01/01 01:11:56 0 s (main) The current system time is smaller than the build date (Apr 26 2015). Waiting up to 60 seconds for time to correct
2000/01/01 01:12:58 0 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:12:58 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 370
2000/01/01 01:12:58 0 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2000/01/01 01:12:58 0 s [Emu] oscam-emu version 715
2000/01/01 01:12:58 0 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:12:58 0 s (main) signal handling initialized
2000/01/01 01:12:58 0 s (config) 159 service-id's loaded in 13 ms
2000/01/01 01:12:58 0 s (config) 161 tier-id's loaded
2000/01/01 01:12:58 0 s (config) 4 provid's loaded
2000/01/01 01:12:58 0 s (reader) S02 [mouse] creating thread for device /dev/ttyUSB0
2000/01/01 01:12:58 0 s (reader) emulator [emu] creating thread for device emulator
2000/01/01 01:12:58 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:12:58 0 s (main) waiting for local card init
2000/01/01 01:12:58 54C9B8 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
2000/01/01 01:12:58 54C9B8 h (webif) HTTP Server running. ip=0.0.0.0 port=61403
2000/01/01 01:12:58 546A08 r (reader) S02 [mouse] Buffers readed 0 bytes total time_us 89504
2000/01/01 01:12:58 54C4F0 r reading key file: /data/addon/oscam/SoftCam.Key
2000/01/01 01:12:58 54C4F0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2000/01/01 01:12:58 546A08 r (reader) S02 [mouse] Buffers readed 0 bytes total time_us 88798
2000/01/01 01:12:58 546A08 r (reader) S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2000/01/01 01:12:59 54C4F0 r (reader) emulator [emu] card detected
2000/01/01 01:12:59 546A08 r (reader) S02 [mouse] card detected
2000/01/01 01:12:59 546A08 r (reader) S02 [mouse] Buffers readed 0 bytes total time_us 89866
2000/01/01 01:13:00 54C4F0 r (reader) emulator [emu] found card system emu
2000/01/01 01:13:00 54C4F0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:13:00 54C4F0 r reading key file: /data/addon/oscam/SoftCam.Key
2000/01/01 01:13:00 546A08 r (reader) S02 [mouse] ATR: XX XX XX XX XX
2000/01/01 01:13:00 546A08 r (reader) S02 [mouse] ERROR: Could not read reader->convention
2000/01/01 01:13:00 546A08 r (reader) S02 [mouse] Error activating card.
2000/01/01 01:13:01 546A08 r (reader) S02 [mouse] Buffers readed 0 bytes total time_us 88695
2000/01/01 01:13:02 546A08 r (reader) S02 [mouse] ATR: XX XX XX XX XX
2000/01/01 01:13:02 546A08 r (reader) S02 [mouse] ERROR: Could not read reader->convention
2000/01/01 01:13:02 546A08 r (reader) S02 [mouse] Error activating card.
2000/01/01 01:13:03 546A08 r (reader) S02 [mouse] Buffers readed 0 bytes total time_us 88556
2000/01/01 01:13:04 546A08 r (reader) S02 [mouse] ATR: XX XX XX XX XX
2000/01/01 01:13:04 546A08 r (reader) S02 [mouse] ERROR: Could not read reader->convention
2000/01/01 01:13:04 546A08 r (reader) S02 [mouse] Error activating card.
2000/01/01 01:13:05 546A08 r (reader) S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:13:05 546A08 r (reader) S02 [mouse] card initializing error
2000/01/01 01:13:05 0 s (main) init for all local cards done
2000/01/01 01:13:05 0 s (anticasc) anti cascading disabled

Gruß,
M0rph

 

[dodo83]

AW: S02 in neuerer oscam läuft nicht

FTDI Treiber ausgewählt

oder mal den Smargo per SMARTREADER Protocol und SERIAL einbinden

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

FTDI Treiber ausgewählt

Also ich habe im Freetz Menu 'OSCAM - Einstellungen' den Hacken bei

- USB Comport Treiber aktivieren
- FTDI + PL2303 Treiber gemeinsam

gesetzt.

oder mal den Smargo per SMARTREADER Protocol und SERIAL einbinden

Was meinst du mit "Smargo per SMARTREADER Protocol und SERIAL einbinden"? Wie mache ich das?

 

[dodo83]

AW: S02 in neuerer oscam läuft nicht

in etwa so
kenne den Smargo auch nicht so

protocol = smartreader
device = 001:002


protocol = smartreader
device = Serial:Reader 1

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Muss ich beides eingeben? Ich habe mal das obere probiert und bekomme dann folgenden Fehler:

Spoiler

• 2000/01/01 01:40:52 0 s >> OSCam << cardserver started, version 1.20-emu, build r10652 (mipsel-linux-uclibc-libusb)
• 2000/01/01 01:40:52 0 s (main) System name = Linux
• 2000/01/01 01:40:52 0 s (main) Host name = fritz.fonwlan.box
• 2000/01/01 01:40:52 0 s (main) Release = 2.6.13.1-ohio
• 2000/01/01 01:40:52 0 s (main) Version = #1 Wed Jan 21 16:48:51 CET 2015
• 2000/01/01 01:40:52 0 s (main) Machine = mips
• 2000/01/01 01:40:52 0 s (main) The current system time is smaller than the build date (Apr 26 2015). Waiting up to 60 seconds for time to correct
• 2000/01/01 01:41:53 0 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
• 2000/01/01 01:41:53 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1328
• 2000/01/01 01:41:53 0 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2000/01/01 01:41:53 0 s [Emu] oscam-emu version 715
• 2000/01/01 01:41:53 0 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
• 2000/01/01 01:41:53 0 s (main) signal handling initialized
• 2000/01/01 01:41:53 0 s (config) 159 service-id's loaded in 12 ms
• 2000/01/01 01:41:53 0 s (config) 161 tier-id's loaded
• 2000/01/01 01:41:53 0 s (config) 4 provid's loaded
• 2000/01/01 01:41:53 0 s (reader) S02 [smartreader] creating thread for device 001:002
• 2000/01/01 01:41:53 0 s (reader) emulator [emu] creating thread for device emulator
• 2000/01/01 01:41:53 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
• 2000/01/01 01:41:53 0 s (main) waiting for local card init
• 2000/01/01 01:41:53 54C4F0 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
• 2000/01/01 01:41:53 54C4F0 h (webif) HTTP Server running. ip=0.0.0.0 port=61403
• 2000/01/01 01:41:53 546DE8 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:41:54 546DE8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2000/01/01 01:41:54 546920 r (reader) S02 [smartreader] Reader initialized (device=001:002, detect=cd, mhz= AUTO, cardmhz=600)
• 2000/01/01 01:41:54 546920 r (reader) S02 [smartreader] card detected
• 2000/01/01 01:41:54 546DE8 r (reader) emulator [emu] card detected
• 2000/01/01 01:41:55 546DE8 r (reader) emulator [emu] found card system emu
• 2000/01/01 01:41:55 546DE8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2000/01/01 01:41:55 546DE8 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:42:04 546920 r (reader) S02 [smartreader] usb bulk write failed : ret = -7

 

[dodo83]

AW: S02 in neuerer oscam läuft nicht

das waren auch nur beispiele
du musst schon den richtigen BUSEVICE auslesen oder die richtige Serial eingeben

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Also zufälligerweise wäre laut lsusb der Busevice mit 001:002 schon richtig gewesen. :-D

Bei der zweiten Variante muss ich die Serial eingeben, aber was muss bei Reader rein? Also

device = xxxxxx:Reader 1

Und wofür steht die 1 am Ende?

 

[supraracer]

AW: S02 in neuerer oscam läuft nicht

Mein S02 Reader mit Smargo 1.07

Spoiler

[reader]
label                         = S02
protocol                      = smartreader
device                        = Serial:12345678
autospeed                     = 0
caid                          = 1702
boxkey                        = 1122334455667788
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 1702:000000
group                         = 1
emmcache                      = 1,3,2

12345678 musst du natürlich mit der Serial deines Smargo ersetzen.

-supraracer

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Hi supraracer,

habe dein config auch gerade probiert. Die serial habe ich aus

/proc/bus/usb/devices

ausgelesen.

Bekomme aber trotzdem wieder den Fehler im Logfile, dass er das Device nicht findet.

Spoiler

• 2000/01/01 02:10:57 0 s (reader) emulator [emu] creating thread for device emulator
• 2000/01/01 02:10:57 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
• 2000/01/01 02:10:57 0 s (main) waiting for local card init
• 2000/01/01 02:10:57 54C9B8 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
• 2000/01/01 02:10:57 54C9B8 h (webif) HTTP Server running. ip=0.0.0.0 port=61403
• 2000/01/01 02:10:57 5469F0 r (reader) S02 [smartreader] Smartreader device Serial:XXXXXXX not found
• 2000/01/01 02:10:57 5469F0 r (reader) S02 [smartreader] Cannot open device: Serial:XXXXXXX
• 2000/01/01 02:10:57 54C4F0 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 02:10:57 54C4F0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2000/01/01 02:10:58 54C4F0 r (reader) emulator [emu] card detected
• 2000/01/01 02:10:59 5469F0 r (reader) S02 [smartreader] Smartreader device Serial:XXXXXXXnot found
• 2000/01/01 02:10:59 54C4F0 r (reader) emulator [emu] found card system emu
• 2000/01/01 02:10:59 54C4F0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2000/01/01 02:10:59 5469F0 r (reader) S02 [smartreader] Cannot open device: Serial:XXXXXXX
• 2000/01/01 02:10:59 54C4F0 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 02:11:01 5469F0 r (reader) S02 [smartreader] Smartreader device Serial:XXXXXXXnot found
• 2000/01/01 02:11:01 5469F0 r (reader) S02 [smartreader] Cannot open device: Serial:XXXXXXX
• ...
• 2000/01/01 02:11:18 0 s (main) init for all local cards done
• 2000/01/01 02:11:18 0 s (anticasc) anti cascading disabled

Gruß,
M0rph

 

[supraracer]

AW: S02 in neuerer oscam läuft nicht

Poste doch mal die Ausgabe von cat /proc/bus/usb/devices hier. Die Smargo Serial musst du nicht XXXen, die kann man ja eh selbst ändern.
Welche FW hast du auf dem Smargo?

-supraracer

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Hier der Output vom Befehlt:

Spoiler

root@fritz:/proc/bus/usb# cat devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB AHCI Root Hub
S: SerialNumber=be008000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 4.00
S: SerialNumber=Reader 3069F88
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

FW vom Smargo kann ich nicht genau sagen, habe den vor Ewigkeiten mal eingestellt. Dafür gab eine SW zum prüfen / updaten, oder?

M0rph

 

[supraracer]

AW: S02 in neuerer oscam läuft nicht

Wüsste nicht wieso das nicht gehen sollte:

Spoiler

[reader]
label                         = S02
protocol                      = smartreader
device                        = Serial:Reader 3069F88
autospeed                     = 0
caid                          = 1702
boxkey                        = 1122334455667788
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 1702:000000
group                         = 1
emmcache                      = 1,3,2

Hast du es genau so probiert? OScam dann auch mal neu starten, bzw. die ganze FritzBox.

-supraracer

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Oscam wird direkt beim speichern neu gestartet. Hat aber nichts gebracht, kommen die oben beschriebenen Fehlermeldungen.
Fritte habe ich gerade auch mal neugestartet, keine Änderung. Immer noch die Fehlermeldungen, dass das Device nicht geöffnet werden kann.

Hier gerne noch mal die Config und das Log file

Spoiler

[reader]
label = S02
protocol = smartreader
device = Serial:3069F88
autospeed = 0
caid = 1702
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000
group = 1
emmcache = 1,3,2

Spoiler

• 2000/01/01 01:01:45 0 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2000/01/01 01:01:45 0 s [Emu] oscam-emu version 715
• 2000/01/01 01:01:45 0 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
• 2000/01/01 01:01:45 0 s (main) signal handling initialized
• 2000/01/01 01:01:45 0 s (config) 159 service-id's loaded in 18 ms
• 2000/01/01 01:01:45 0 s (config) 161 tier-id's loaded
• 2000/01/01 01:01:45 0 s (config) 4 provid's loaded
• 2000/01/01 01:01:45 0 s (reader) S02 [smartreader] creating thread for device Serial:3069F88
• 2000/01/01 01:01:45 0 s (reader) emulator [emu] creating thread for device emulator
• 2000/01/01 01:01:45 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
• 2000/01/01 01:01:45 0 s (main) waiting for local card init
• 2000/01/01 01:01:45 54C4F0 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
• 2000/01/01 01:01:45 54C4F0 h (webif) HTTP Server running. ip=0.0.0.0 port=61403
• 2000/01/01 01:01:45 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:45 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:45 546DE8 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:01:45 546DE8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2000/01/01 01:01:46 546DE8 r (reader) emulator [emu] card detected
• 2000/01/01 01:01:47 546DE8 r (reader) emulator [emu] found card system emu
• 2000/01/01 01:01:47 546DE8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2000/01/01 01:01:47 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:47 546DE8 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:01:47 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:49 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:49 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:51 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:51 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:53 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:53 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:55 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:55 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:57 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:57 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:01:59 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:01:59 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:02:01 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:02:01 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:02:03 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:02:03 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:02:05 546920 r (reader) S02 [smartreader] Smartreader device Serial:3069F88 not found
• 2000/01/01 01:02:05 546920 r (reader) S02 [smartreader] Cannot open device: Serial:3069F88
• 2000/01/01 01:02:06 0 s (main) init for all local cards done
• 2000/01/01 01:02:06 0 s (anticasc) anti cascading disabled

 

[supraracer]

AW: S02 in neuerer oscam läuft nicht

Deine Config ist falsch, schau was ich in #12 gepostet habe und übernimm das 1:1

-supraracer

 

[M0rph]

AW: S02 in neuerer oscam läuft nicht

Oh, sorry... :emoticon-0179-headb

Aber dann bekomme ich folgende Fehlermeldung

Spoiler

• 2000/01/01 01:11:39 0 s (reader) S02 [smartreader] creating thread for device Serial:Reader 3069F88
• 2000/01/01 01:11:39 0 s (reader) emulator [emu] creating thread for device emulator
• 2000/01/01 01:11:39 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
• 2000/01/01 01:11:39 0 s (main) waiting for local card init
• 2000/01/01 01:11:39 546CD0 h (webif) webif: decompressed 101862 bytes back into 270276 bytes
• 2000/01/01 01:11:39 546CD0 h (webif) HTTP Server running. ip=0.0.0.0 port=61403
• 2000/01/01 01:11:40 5467F0 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:11:40 5467F0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2000/01/01 01:11:40 546328 r (reader) S02 [smartreader] Reader initialized (device=Serial:Reader 3069F88, detect=cd, mhz=600, cardmhz=600)
• 2000/01/01 01:11:40 546328 r (reader) S02 [smartreader] card detected
• 2000/01/01 01:11:40 5467F0 r (reader) emulator [emu] card detected
• 2000/01/01 01:11:41 5467F0 r (reader) emulator [emu] found card system emu
• 2000/01/01 01:11:41 5467F0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2000/01/01 01:11:42 5467F0 r reading key file: /data/addon/oscam/SoftCam.Key
• 2000/01/01 01:11:50 546328 r (reader) S02 [smartreader] usb bulk write failed : ret = -7