Neues OSCAM SVM kompilat (x64)- keine Reader erkennt.

[thorium]

Hallo,
ich habe nach einer Ewigkeit mal wieder ein Oscam vom SVN (11518) kompiliert. Leider komme ich beim anschließenden Ausführen der Binary nicht über :
(! Verwendung von vorhandenen Configs ! Linux x64 OpenSuSE Leap 15.0 x64, Smargo)

Spoiler: webif log

• 2019/05/27 19:50:17 00000000 s (main) System name = Linux
• 2019/05/27 19:50:17 00000000 s (main) Host name = toxic
• 2019/05/27 19:50:17 00000000 s (main) Release = 4.12.14-lp150.12.58-default
• 2019/05/27 19:50:17 00000000 s (main) Version = #1 SMP Mon Apr 1 15:20:46 UTC 2019 (58fcc15)
• 2019/05/27 19:50:17 00000000 s (main) Machine = x86_64
• 2019/05/27 19:50:17 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22365
• 2019/05/27 19:50:17 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
• 2019/05/27 19:50:17 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
• 2019/05/27 19:50:17 00000000 s (main) signal handling initialized
• 2019/05/27 19:50:17 00000000 s (config) 4 provid's loaded
• 2019/05/27 19:50:17 00000000 s (config) 775 service-id's loaded in 0 ms
• 2019/05/27 19:50:17 00000000 s (net) cs357x: initialized (fd=4, port=10000)
• 2019/05/27 19:50:17 00000000 s (main) waiting for local card init
• 2019/05/27 19:50:17 07662699 h (webif) webif: decompressed 158982 bytes back into 385216 bytes
• 2019/05/27 19:50:17 07662699 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2019/05/27 19:50:18 00000000 s (main) init for all local cards done
• 2019/05/27 19:50:18 00000000 s (emmcache) loaded 122 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
• 2019/05/27 19:50:18 00000000 s (emmcache) loaded 122 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
• 2019/05/27 19:50:29 644B50B7 c (client) encrypted cs357x-client 192.168.1.204 granted (thor, au=auto (1 reader))

Es ist ein Smargo attached, es wird jedoch nicht geladen. Ich habe beim kompilieren im Grunde auch fast alles eingeschaltet

Spoiler: Make config

Add-ons:
WEBIF : on
WEBIF_LIVELOG : on
WEBIF_JQUERY : on
TOUCH : off
WITH_SSL : off
HAVE_DVBAPI : off
WITH_NEUTRINO : off
READ_SDT_CHARSETS : on
IRDETO_GUESSING : on
CS_ANTICASC : off
WITH_DEBUG : off
MODULE_MONITOR : on
WITH_LB : off
CS_CACHEEX : off
CW_CYCLE_CHECK : off
LCDSUPPORT : off
LEDSUPPORT : off
CLOCKFIX : off
IPV6SUPPORT : off

Protocols:
MODULE_CAMD33 : on
MODULE_CAMD35 : on
MODULE_CAMD35_TCP : on
MODULE_NEWCAMD : on
MODULE_CCCAM : on
MODULE_CCCSHARE : on
MODULE_GBOX : on
MODULE_RADEGAST : off
MODULE_SCAM : on
MODULE_SERIAL : on
MODULE_CONSTCW : off
MODULE_PANDORA : off
MODULE_GHTTP : off

Readers:
READER_NAGRA : on
READER_NAGRA_MERLIN : on
READER_IRDETO : on
READER_CONAX : on
READER_CRYPTOWORKS : on
READER_SECA : on
READER_VIACCESS : on
READER_VIDEOGUARD : on
READER_DRE : on
READER_TONGFANG : on
READER_BULCRYPT : on
READER_GRIFFIN : on
READER_DGCRYPT : on

Card readers:
CARDREADER_PHOENIX : on
CARDREADER_INTERNAL : on
CARDREADER_SC8IN1 : on
CARDREADER_MP35 : on
CARDREADER_SMARGO : on
CARDREADER_DB2COM : on
CARDREADER_STAPI : on
CARDREADER_STAPI5 : on
CARDREADER_STINGER : on
CARDREADER_DRECAS : on

Es sollte also laufen, ich habe an den Konfigs nichts angepasst, einfach die vorhandene Binary gehen das neue Kompilat getauscht und den Dienst somit im vorhandenen Millieu gestartet.
Alte Version:
11209
Neue Version:
11518

Das anbei noch der start der alten Version (die funktioniert).

Spoiler: Webif log alte version (Ausschnitt)

• 2019/05/27 19:58:22 00000000 s (main) System name = Linux
• 2019/05/27 19:58:22 00000000 s (main) Host name = toxic
• 2019/05/27 19:58:22 00000000 s (main) Release = 4.12.14-lp150.12.58-default
• 2019/05/27 19:58:22 00000000 s (main) Version = #1 SMP Mon Apr 1 15:20:46 UTC 2019 (58fcc15)
• 2019/05/27 19:58:22 00000000 s (main) Machine = x86_64
• 2019/05/27 19:58:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22687
• 2019/05/27 19:58:22 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
• 2019/05/27 19:58:22 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
• 2019/05/27 19:58:22 00000000 s (main) signal handling initialized
• 2019/05/27 19:58:22 00000000 s (config) 4 provid's loaded
• 2019/05/27 19:58:22 00000000 s (config) 775 service-id's loaded in 1 ms
• 2019/05/27 19:58:22 00000000 s (net) cs357x: initialized (fd=4, port=10000)
• 2019/05/27 19:58:22 00000000 s (reader) UM02-smargo [smartreader] creating thread for device Serial:toxic
• 2019/05/27 19:58:22 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2019/05/27 19:58:22 00000000 s (main) waiting for local card init
• 2019/05/27 19:58:22 6736B1A4 h (webif) webif: decompressed 163270 bytes back into 391088 bytes
• 2019/05/27 19:58:22 6736B1A4 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2019/05/27 19:58:22 1521B38A r (reader) UM02-smargo [smartreader] Reader initialized (device=Serial:toxic, detect=cd, mhz= AUTO, cardmhz=343)
• 2019/05/27 19:58:23 1521B38A r (reader) UM02-smargo [smartreader] card detected
• 2019/05/27 19:58:26 1521B38A r (reader) UM02-smargo [smartreader] ATR: 3
• 2019/05/27 19:58:26 1521B38A r (reader) UM02-smargo [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2019/05/27 19:58:26 1521B38A r (reader) UM02-smargo [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
• 2019/05/27 19:58:26 1521B38A r (reader) UM02-smargo [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
• 2019/05/27 19:58:27 1521B38A r (reader) UM02-smargo [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
• 2019/05/27 19:58:27 1521B38A r (reader) UM02-smargo [smartreader] Card responded ok for ifsd request of 28
• 2019/05/27 19:58:28 1521B38A r (reader) UM02-smargo [smartreader] detect native nagra card
• 2019/05/27 19:58:29 1521B38A r (reader) UM02-smargo [smartreader] ready for requests
• 2019/05/27 19:58:29 1521B38A r (reader) UM02-smargo [smartreader] found card system nagra

 

[Azo]

Hi,

hast Du mit libusb gebaut?

Tschau

Azo

 

[thorium]

Yes Sir! USE_LIBUSB=1 machet den Unterschied. Die libraries hatte ich schon im System. Das Haus dankt!
Da hat er auch gleich eine neue List_Smargo gebaut. War halt schon wieder eine Weile her...