Information ausblenden
Das Digital Eliteboard ist ein Kostenloses Forum. Wenn du alle Bereiche sehen möchtest oder Fragen hast, musst du dich zunächst Registrieren.

Jetzt Registrieren

Talk S*y und Wilhelmtel

Dieses Thema im Forum "Dreambox 7020 HD - V2" wurde erstellt von vatan1976, 10. Februar 2013.

  1. vatan1976
    Offline

    vatan1976 Newbie

    Registriert:
    2. August 2012
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    User,

    brauche rat, komme nicht weiter.

    Sicherlich wurden solche ähnlichen fragen gestellt, verzeiht mir.

    Ich habe eine Dream 7020HD. Zur Zeit habe ich eine Wilhelm Tel Karte (Conax Verschüsselung) , mit Oscam 1.20 am laufen.
    Nun habe ich eine S*y V13 bekommen, habe verucht einiges einzustellen, leider vergebens.
    Wie kann ich nun S*y zusetzlich zum laufen bringen?

    Wo sind meine fehler????

    Danke im Vorraus...
    Konfigs
    OSCAM.SERVER

    [ reader]
    label = wtnet
    protocol = internal
    device = /dev/sci0
    caid = 0B00
    detect = cd
    mhz = 500
    cardmhz = 357
    group = 1
    emmcache = 1,3,2

    [ reader]
    Label = v13
    Protocol = internal
    Device = /dev/sci1
    Detect = CD
    Group = 3
    boxid = 12345678
    CAID = 09c4
    ident = 09c4:000000
    EMMCache = 1,3,2

    OSCAM.CONF

    [global]
    logfile = /tmp/oscam.log
    disableuserfile = 0
    clienttimeout = 15000
    fallbacktimeout = 4900
    clientmaxidle = 60
    cachedelay = 120
    bindwait = 20
    netprio = 0
    nice = -1
    maxlogsize = 100
    preferlocalcards = 1
    saveinithistory = 1

    [monitor]
    hideclient_to = 15
    appendchaninfo = 0

    [camd35]
    port = 25005
    updateinterval = 240
    minimizecards = 0

    [cs357x]
    port=25000

    [cccam]
    port = 24000
    reshare = 1
    forward_origin_card = 0
    ignorereshare = 1
    version = 2.1.1
    minimizecards = 0
    keepconnected = 1
    stealth = 0
    reshare_mode = 0
    updateinterval = 240

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    pmt_mode = 0
    request_mode = 0

    [webif]
    httpport = 9000
    httpuser = ****
    httppwd = *****
    httprefresh = 20
    httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
    httphideidleclients = 1
    httpreadonly = 0
    httpsavefullcfg = 0

    OSCAM.DVBAPI

    #
    # dvbapi configuration
    #
    # format:
    #
    # priority:
    # P: CAID[:][provider ID][:][service ID][:][ECM PID] [continue]
    #
    # ignore:
    # I: CAID[:][provider ID][:][service ID][:][ECM PID]
    #
    # wait:
    # D: CAID[:][provider ID][:][service ID][:][ECM PID] delay
    #
    # map:
    # M: CAID[:][provider ID][:][service ID][:][ECM PID] target CAID[:][target provider ID]
    #
    # lenght:
    # L: CAID[:][provider ID][:][service ID][:][ECM PID] length
    #

    #P: 0100:123456 # prioritise CAID 0100 with provider 123456

    #P: :1234 # prioritise ECM with provider ID 1234 on
    # on any CAID and service
     
    Zuletzt von einem Moderator bearbeitet: 10. Februar 2013
    #1
  2. Mufamba
    Offline

    Mufamba Hacker

    Registriert:
    2. September 2009
    Beiträge:
    366
    Zustimmungen:
    64
    Punkte für Erfolge:
    28
    AW: S*y und Wilhelmtel

    Wir bräuchten ein paar mehr Infos.
    Log?
    Wird die Karte erkannt?
    Wie wird die Karte im webinterface angezeigt?

    Poste mal die oscam.user

    Gruß

    Gesendet von meinem GT-I9300 mit Tapatalk 2
     
    #2
  3. vatan1976
    Offline

    vatan1976 Newbie

    Registriert:
    2. August 2012
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: S*y und Wilhelmtel

    Log

    ---------------------------------------------------------------------------
    ----
    >> OSCam << cardserver log switched at Sun Feb 10 17:20:55 2013
    ---------------------------------------------------------------------------
    ----
    2013/02/10 17:20:55 0 s starting thread log_list_thread
    2013/02/10 17:20:55 0 s log_list_thread thread started
    2013/02/10 17:20:55 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7943 (mipsel-unknown-linux-gnu-ssl-libusb)
    2013/02/10 17:20:55 0 s version=1.20-unstable_svn, build #7943, system=mipsel-unknown-linux-gnu-ssl-libusb, nice=-1
    2013/02/10 17:20:55 0 s client max. idle=60 sec, debug level=0, filter_sensitive=1
    2013/02/10 17:20:55 0 s max. logsize=100 Kb, loghistorysize=4096 bytes
    2013/02/10 17:20:55 0 s client timeout=15000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/10 17:20:55 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7943 (mipsel-unknown-linux-gnu-ssl-libusb)
    2013/02/10 17:20:55 0 version=1.20-unstable_svn, build #7943, system=mipsel-unknown-linux-gnu-ssl-libusb, nice=-1
    2013/02/10 17:20:55 0 client max. idle=60 sec, debug level=0, filter_sensitive=1
    2013/02/10 17:20:55 0 max. logsize=100 Kb, loghistorysize=4096 bytes
    2013/02/10 17:20:55 0 client timeout=15000 ms, fallback timeout=4900 ms, cache delay=120 ms
    2013/02/10 17:20:55 0 s services reloaded: 0 services freed, 10 services loaded, rejected 0
    2013/02/10 17:20:55 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
    2013/02/10 17:20:55 0 s signal handling initialized (type=sysv)
    2013/02/10 17:20:55 0 s 425 service-id's loaded in 7ms
    2013/02/10 17:20:55 0 s oscam.tiers loading failed
    2013/02/10 17:20:55 0 s 4 provid's loaded
    2013/02/10 17:20:55 0 s 0 lengths for caid guessing loaded
    2013/02/10 17:20:55 0 s ERROR: Cannot open file "/etc/tuxbox/config//oscam.whitelist" (errno=2 No such file or directory)
    2013/02/10 17:20:55 0 s ERROR: Cannot open file "/etc/tuxbox/config//oscam.cacheex" (errno=2 No such file or directory)
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s monitor: disabled
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s camd35: initialized (fd=6, port=25000)
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s cs378x: disabled
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s newcamd: disabled
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s cccam: initialized (fd=7, port=24000, crypted)
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s pandora: disabled
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s csp: disabled
    2013/02/10 17:20:55 0 s Starting listener 0
    2013/02/10 17:20:55 0 s radegast: disabled
    2013/02/10 17:20:55 0 s starting thread http
    2013/02/10 17:20:55 0 s http thread started
    2013/02/10 17:20:55 0 s starting thread reader check
    2013/02/10 17:20:55 0 s reader check thread started
    2013/02/10 17:20:55 0 s starting thread check
    2013/02/10 17:20:55 0 s check thread started
    2013/02/10 17:20:55 67DBD0 h HTTP Server listening on port 9000
    2013/02/10 17:20:55 0 s wtnet [internal] creating thread for device /dev/sci0
    2013/02/10 17:20:55 0 s v13 [internal] creating thread for device /dev/sci1
    2013/02/10 17:20:55 779006E0 r wtnet [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2013/02/10 17:20:55 0 s waiting for local card init
    2013/02/10 17:20:55 77902080 r v13 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
    2013/02/10 17:20:56 779006E0 r wtnet [internal] card detected
    2013/02/10 17:20:56 77902080 r v13 [internal] card detected
    2013/02/10 17:20:58 779006E0 r wtnet [internal] ATR: 3B 34 94 00 30 42 30 30
    2013/02/10 17:20:58 779006E0 r wtnet [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
    2013/02/10 17:20:58 779006E0 r wtnet [internal] Setting baudrate to 55800 bps
    2013/02/10 17:20:58 779006E0 r wtnet [internal] Calculated work ETU is 12.80 us
    2013/02/10 17:20:58 779006E0 r wtnet [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
    2013/02/10 17:20:58 77902080 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
    2013/02/10 17:20:58 77902080 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
    2013/02/10 17:20:58 77902080 r v13 [internal] Setting baudrate to 9600 bps
    2013/02/10 17:20:58 77902080 r v13 [internal] Calculated work ETU is 74.40 us
    2013/02/10 17:20:58 77902080 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
    2013/02/10 17:20:59 779006E0 r wtnet [internal] type: Conax, caid: 0B00, serial: ##########, hex serial: ########, card: v64
    2013/02/10 17:20:59 779006E0 r wtnet [internal] Providers: 1
    2013/02/10 17:20:59 779006E0 r wtnet [internal] Provider: 1 Provider-Id: 000000
    2013/02/10 17:20:59 779006E0 r wtnet [internal] Provider: 1 SharedAddress: 002C8672
    2013/02/10 17:20:59 779006E0 r wtnet [internal] found card system conax
    2013/02/10 17:20:59 779006E0 r wtnet [conax] Package: 1, id: 1010, classes: 01202006, date: 2013/02/01 - 2013/02/28, name: WilhelmTel 1
    2013/02/10 17:20:59 779006E0 r wtnet [conax] Package: 2, id: 1010, classes: 01202006, date: 2013/01/01 - 2013/01/31, name: WilhelmTel 1
    2013/02/10 17:20:59 779006E0 r wtnet [conax] ready for requests
    2013/02/10 17:20:59 77902080 r v13 [internal] Card type: P1TV
    2013/02/10 17:20:59 77902080 r v13 [internal] Rom version: 10A7
    2013/02/10 17:20:59 77902080 r v13 [internal] parental lock setting: FF FF FF FF
    2013/02/10 17:20:59 77902080 r v13 [internal] type: VideoGuard Sky Germany (09C4), caid: 09C4
    2013/02/10 17:20:59 77902080 r v13 [internal] serial: ########, BoxID: ########, baseyear: 2004
    2013/02/10 17:20:59 77902080 r v13 [internal] ready for requests
    2013/02/10 17:20:59 77902080 r v13 [internal] found card system videoguard2
    2013/02/10 17:20:59 77902080 r v13 [videoguard2] card detected
    2013/02/10 17:20:59 77902080 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
    2013/02/10 17:21:11 0 s init for all local cards done
    2013/02/10 17:21:11 0 s anti cascading disabled
    2013/02/10 17:21:11 779041E0 c plain dvbapi-client granted (anonymous, au=off)
    2013/02/10 17:21:11 779041E0 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
    2013/02/10 17:21:11 779063B0 c anonymous disconnected from 213.39.157.190
    2013/02/10 17:21:11 77907C10 c anonymous disconnected from 84.46.55.24
    2013/02/10 17:21:11 77909470 c encrypted cccam-client 213.39.157.190 granted (tugranbor, au=auto (2 reader))
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1766 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 1666 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 1866 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C66 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 4] CAID: 09C4 ECM_PID: 1B66 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 5] CAID: 09C7 ECM_PID: 1D66 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 6] CAID: 09AF ECM_PID: 1F66 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 7] CAID: 098C ECM_PID: 1A66 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: [ADD PID 8] CAID: 1861 ECM_PID: 1966 PROVID: 000000
    2013/02/10 17:21:15 779041E0 c dvbapi: Found 9 ECMpids and 4 STREAMpids in PMT
    2013/02/10 17:21:15 779041E0 c dvbapi: New program number: 000C (Nat Geo Wild) [pmt_list_management 3]
    2013/02/10 17:21:15 7790AD60 c encrypted cccam-client 84.46.55.24 granted (test123, au=off)
    2013/02/10 17:21:16 77902080 r v13 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/10 17:21:16 779041E0 c anonymous (09C4&000000/0000/000C/B3:E1B321A12BA53B679B4EB8DCFFE27F06): not found (358 ms) by v13
    2013/02/10 17:21:16 77902080 r v13 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/02/10 17:21:16 779041E0 c anonymous (09C4&000000/0000/000C/B3:B0A0816CACA7F3F90C99EBE44A1D7457): not found (363 ms) by v13

    user

    [account]
    user = 22222
    pwd = 22222
    group = 1,3
    au = 1

    [account]
    user = 22222
    pwd = 22222
    group = 1,3
     
    Zuletzt von einem Moderator bearbeitet: 18. Februar 2013
    #3

Direkt Antworten

Überprüfung:
Der Entwurf wurde gespeichert Der Entwurf wurde gelöscht

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.