Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Raspbery Pi oder Beaglebone Black?
- Ersteller LevKaan2002
- Erstellt am
-
Nobody is reading this thread right now.
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
AW: Raspbery Pi oder Beaglebone Black?
Hallo!
Hardware:
1.Beaglebone Black
2.Netzteil Ansmann APS 1000 mA
3.Hub Trust 7 Port mit 2 Ampere Netzteil(dieser:
4.4 mal Easymouse2 mit Karten:S02,HD+,2xCyfra+.
Wie kriege ich den Syslog,da debian im Flash leuft ist log weg nach Neustart.
Gruss
Hallo!
Hardware:
1.Beaglebone Black
2.Netzteil Ansmann APS 1000 mA
3.Hub Trust 7 Port mit 2 Ampere Netzteil(dieser:
Sie müssen registriert sein, um Links zu sehen.
)4.4 mal Easymouse2 mit Karten:S02,HD+,2xCyfra+.
Wie kriege ich den Syslog,da debian im Flash leuft ist log weg nach Neustart.
Gruss
- Registriert
- 10. Januar 2012
- Beiträge
- 21.690
- Lösungen
- 9
- Reaktionspunkte
- 30.865
- Punkte
- 1.113
- Ort
- Paradise City
AW: Raspbery Pi oder Beaglebone Black?
Hallo!
Sieht so aus:
Filesystem Size Used Avail Use% Mounted on
rootfs 1.7G 513M 1.1G 32% /
udev 10M 0 10M 0% /dev
tmpfs 50M 224K 50M 1% /run
/dev/disk/by-uuid/36b1cde2-644d-4bd6-9e25-11e7f0f6d92c 1.7G 513M 1.1G 32% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 100M 0 100M 0% /run/shm
/dev/mmcblk0p1 71M 19M 53M 26% /boot/uboot
tmpfs 50M 8.0K 50M 1% /tmp
tmpfs 20M 0 20M 0% /var/tmp
tmpfs 70M 2.2M 68M 4% /var/log
tmpfs 150M 0 150M 0% /var/cache/apt/archives
root@arm:~#
Werde ich dann tmp2ram deinstalieren. und neuer Versuch starten,vielleich sieht mann was er hat.
Ist gemacht:
root@arm:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 1.7G 511M 1.1G 32% /
udev 10M 0 10M 0% /dev
tmpfs 50M 220K 50M 1% /run
/dev/disk/by-uuid/36b1cde2-644d-4bd6-9e25-11e7f0f6d92c 1.7G 511M 1.1G 32% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 100M 0 100M 0% /run/shm
/dev/mmcblk0p1 71M 19M 53M 26% /boot/uboot
root@arm:~#
Und neuer Versuch starten,vielleich sieht mann was er hat.
Aber erst Morgen.
Gruss
Hallo!
Sieht so aus:
Filesystem Size Used Avail Use% Mounted on
rootfs 1.7G 513M 1.1G 32% /
udev 10M 0 10M 0% /dev
tmpfs 50M 224K 50M 1% /run
/dev/disk/by-uuid/36b1cde2-644d-4bd6-9e25-11e7f0f6d92c 1.7G 513M 1.1G 32% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 100M 0 100M 0% /run/shm
/dev/mmcblk0p1 71M 19M 53M 26% /boot/uboot
tmpfs 50M 8.0K 50M 1% /tmp
tmpfs 20M 0 20M 0% /var/tmp
tmpfs 70M 2.2M 68M 4% /var/log
tmpfs 150M 0 150M 0% /var/cache/apt/archives
root@arm:~#
Werde ich dann tmp2ram deinstalieren. und neuer Versuch starten,vielleich sieht mann was er hat.
Ist gemacht:
root@arm:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 1.7G 511M 1.1G 32% /
udev 10M 0 10M 0% /dev
tmpfs 50M 220K 50M 1% /run
/dev/disk/by-uuid/36b1cde2-644d-4bd6-9e25-11e7f0f6d92c 1.7G 511M 1.1G 32% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 100M 0 100M 0% /run/shm
/dev/mmcblk0p1 71M 19M 53M 26% /boot/uboot
root@arm:~#
Und neuer Versuch starten,vielleich sieht mann was er hat.
Aber erst Morgen.
Gruss
Zuletzt bearbeitet:
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
AW: Raspbery Pi oder Beaglebone Black?
Hallo!
Neuer Versuch,leider ohne Erfolg.
Syslog sieht so aus:
Gruss
Hallo!
Neuer Versuch,leider ohne Erfolg.
Syslog sieht so aus:
Aug 26 21:18:00 arm kernel: imklog 5.8.11, log source = /proc/kmsg started.
Aug 26 21:18:00 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1806" x-info="http://www.rsyslog.com"] start
Aug 26 21:18:00 arm kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Aug 26 21:18:00 arm kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 26 21:18:00 arm kernel: [ 0.000000] Linux version 3.8.13-bone26 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Fri Aug 16 20:56:24 UTC 2013
Aug 26 21:18:00 arm kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Aug 26 21:18:00 arm kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Aug 26 21:18:00 arm kernel: [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Aug 26 21:18:00 arm kernel: [ 0.000000] On node 0 totalpages: 130816
Aug 26 21:18:00 arm kernel: [ 0.000000] free_area_init_node: node 0, pgdat c09d0540, node_mem_map c0a4b000
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 0 pages reserved
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
Aug 26 21:18:00 arm kernel: [ 0.000000] AM335X ES1.0 (neon )
Aug 26 21:18:00 arm kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e5b000 s14080 r8192 d14592 u36864
Aug 26 21:18:00 arm kernel: [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
Aug 26 21:18:00 arm kernel: [ 0.000000] pcpu-alloc: [0] 0
Aug 26 21:18:00 arm kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
Aug 26 21:18:00 arm kernel: [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=36b1cde2-644d-4bd6-9e25-11e7f0f6d92c ro rootfstype=ext4 rootwait fixrtc ip=
Aug 26 21:18:00 arm kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] __ex_table already sorted, skipping sort
Aug 26 21:18:00 arm kernel: [ 0.000000] allocated 1048576 bytes of page_cgroup
Aug 26 21:18:00 arm kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory: 511MB = 511MB total
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory: 504624k/504624k available, 19664k reserved, 0K highmem
Aug 26 21:18:00 arm kernel: [ 0.000000] Virtual kernel memory layout:
Aug 26 21:18:00 arm kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .text : 0xc0008000 - 0xc0904ad0 (9203 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .init : 0xc0905000 - 0xc094e700 ( 294 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .data : 0xc0950000 - 0xc09d3500 ( 526 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .bss : 0xc09d3500 - 0xc0a4a900 ( 477 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] Hierarchical RCU implementation.
Aug 26 21:18:00 arm kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Aug 26 21:18:00 arm kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Aug 26 21:18:00 arm kernel: [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Aug 26 21:18:00 arm kernel: [ 0.000000] Total of 128 interrupts on 1 active controller
Aug 26 21:18:00 arm kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
Aug 26 21:18:00 arm kernel: [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Aug 26 21:18:00 arm kernel: [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
Aug 26 21:18:00 arm kernel: [ 0.000000] Console: colour dummy device 80x30
Aug 26 21:18:00 arm kernel: [ 0.000381] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
Aug 26 21:18:00 arm kernel: [ 0.017383] pid_max: default: 32768 minimum: 301
Aug 26 21:18:00 arm kernel: [ 0.017635] Security Framework initialized
Aug 26 21:18:00 arm kernel: [ 0.017734] Mount-cache hash table entries: 512
Aug 26 21:18:00 arm kernel: [ 0.027626] Initializing cgroup subsys cpuacct
Aug 26 21:18:00 arm kernel: [ 0.027664] Initializing cgroup subsys memory
Aug 26 21:18:00 arm kernel: [ 0.027732] Initializing cgroup subsys blkio
Aug 26 21:18:00 arm kernel: [ 0.027877] CPU: Testing write buffer coherency: ok
Aug 26 21:18:00 arm kernel: [ 0.028463] CPU0: thread -1, cpu 0, socket -1, mpidr 0
Aug 26 21:18:00 arm kernel: [ 0.028541] Setting up static identity map for 0x80634640 - 0x80634698
Aug 26 21:18:00 arm kernel: [ 0.030218] Brought up 1 CPUs
Aug 26 21:18:00 arm kernel: [ 0.030243] SMP: Total of 1 processors activated (363.67 BogoMIPS).
Aug 26 21:18:00 arm kernel: [ 0.031605] devtmpfs: initialized
Aug 26 21:18:00 arm kernel: [ 0.095851] pinctrl core: initialized pinctrl subsystem
Aug 26 21:18:00 arm kernel: [ 0.096087] rstctl core: initialized rstctl subsystem
Aug 26 21:18:00 arm kernel: [ 0.096589] regulator-dummy: no parameters
Aug 26 21:18:00 arm kernel: [ 0.097159] NET: Registered protocol family 16
Aug 26 21:18:00 arm kernel: [ 0.098134] DMA: preallocated 256 KiB pool for atomic coherent allocations
Aug 26 21:18:00 arm kernel: [ 0.108124] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
Aug 26 21:18:00 arm kernel: [ 0.108886] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.108917] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.108941] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.110170] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.110346] OMAP GPIO hardware version 0.1
Aug 26 21:18:00 arm kernel: [ 0.111871] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.113214] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.114533] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.115209] of_get_named_gpio_flags exited with status 52
Aug 26 21:18:00 arm kernel: [ 0.115242] gpio-rctrl rstctl.3: loaded OK
Aug 26 21:18:00 arm kernel: [ 0.120515] hw-breakpoint: debug architecture 0x4 unsupported.
Aug 26 21:18:00 arm kernel: [ 0.122668] cpsw.0: No hwaddr in dt. Using 90:59:af:55:5c:07 from efuse
Aug 26 21:18:00 arm kernel: [ 0.122700] cpsw.1: No hwaddr in dt. Using 90:59:af:55:5c:09 from efuse
Aug 26 21:18:00 arm kernel: [ 0.136921] bio: create slab <bio-0> at 0
Aug 26 21:18:00 arm kernel: [ 0.148496] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
Aug 26 21:18:00 arm kernel: [ 0.148734] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 0.148963] vmmcsd_fixed: 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.151744] SCSI subsystem initialized
Aug 26 21:18:00 arm kernel: [ 0.152223] usbcore: registered new interface driver usbfs
Aug 26 21:18:00 arm kernel: [ 0.152334] usbcore: registered new interface driver hub
Aug 26 21:18:00 arm kernel: [ 0.152651] usbcore: registered new device driver usb
Aug 26 21:18:00 arm kernel: [ 0.154794] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Aug 26 21:18:00 arm kernel: [ 0.156406] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
Aug 26 21:18:00 arm kernel: [ 0.158737] DCDC1: at 1500 mV
Aug 26 21:18:00 arm kernel: [ 0.159895] vdd_mpu: 925 <--> 1325 mV at 1100 mV
Aug 26 21:18:00 arm kernel: [ 0.161090] vdd_core: 925 <--> 1150 mV at 1100 mV
Aug 26 21:18:00 arm kernel: [ 0.162273] LDO1: at 1800 mV
Aug 26 21:18:00 arm kernel: [ 0.163354] LDO2: at 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.165364] LDO3: 1800 mV
Aug 26 21:18:00 arm kernel: [ 0.166527] LDO4: at 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.167527] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Aug 26 21:18:00 arm kernel: [ 0.168357] omap_i2c 44e0b000.i2c: unable to select pin group
Aug 26 21:18:00 arm kernel: [ 0.169167] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
Aug 26 21:18:00 arm kernel: [ 0.171757] omap_i2c 4819c000.i2c: unable to select pin group
Aug 26 21:18:00 arm kernel: [ 0.172003] media: Linux media interface: v0.10
Aug 26 21:18:00 arm kernel: [ 0.172105] Linux video capture interface: v2.00
Aug 26 21:18:00 arm kernel: [ 0.172241] pps_core: LinuxPPS API ver. 1 registered
Aug 26 21:18:00 arm kernel: [ 0.172258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Aug 26 21:18:00 arm kernel: [ 0.172951] Advanced Linux Sound Architecture Driver Initialized.
Aug 26 21:18:00 arm kernel: [ 0.174015] NetLabel: Initializing
Aug 26 21:18:00 arm kernel: [ 0.174035] NetLabel: domain hash size = 128
Aug 26 21:18:00 arm kernel: [ 0.174046] NetLabel: protocols = UNLABELED CIPSOv4
Aug 26 21:18:00 arm kernel: [ 0.174163] NetLabel: unlabeled traffic allowed by default
Aug 26 21:18:00 arm kernel: [ 0.174513] Switching to clocksource gp_timer
Aug 26 21:18:00 arm kernel: [ 0.230351] NET: Registered protocol family 2
Aug 26 21:18:00 arm kernel: [ 0.231553] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Aug 26 21:18:00 arm kernel: [ 0.231696] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Aug 26 21:18:00 arm kernel: [ 0.231844] TCP: Hash tables configured (established 4096 bind 4096)
Aug 26 21:18:00 arm kernel: [ 0.231945] TCP: reno registered
Aug 26 21:18:00 arm kernel: [ 0.231972] UDP hash table entries: 256 (order: 1, 12288 bytes)
Aug 26 21:18:00 arm kernel: [ 0.232015] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
Aug 26 21:18:00 arm kernel: [ 0.232445] NET: Registered protocol family 1
Aug 26 21:18:00 arm kernel: [ 0.233062] RPC: Registered named UNIX socket transport module.
Aug 26 21:18:00 arm kernel: [ 0.233084] RPC: Registered udp transport module.
Aug 26 21:18:00 arm kernel: [ 0.233097] RPC: Registered tcp transport module.
Aug 26 21:18:00 arm kernel: [ 0.233109] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 26 21:18:00 arm kernel: [ 0.233574] Trying to unpack rootfs image as initramfs...
Aug 26 21:18:00 arm kernel: [ 0.524361] Freeing initrd memory: 2444K
Aug 26 21:18:00 arm kernel: [ 0.525189] CPU PMU: probing PMU on CPU 0
Aug 26 21:18:00 arm kernel: [ 0.525225] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Aug 26 21:18:00 arm kernel: [ 0.525782] omap2_mbox_probe: platform not supported
Aug 26 21:18:00 arm kernel: [ 0.792293] VFS: Disk quotas dquot_6.5.2
Aug 26 21:18:00 arm kernel: [ 0.792553] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 26 21:18:00 arm kernel: [ 0.793920] NFS: Registering the id_resolver key type
Aug 26 21:18:00 arm kernel: [ 0.794037] Key type id_resolver registered
Aug 26 21:18:00 arm kernel: [ 0.794054] Key type id_legacy registered
Aug 26 21:18:00 arm kernel: [ 0.794122] fuse init (API version 7.20)
Aug 26 21:18:00 arm kernel: [ 0.795021] Btrfs loaded
Aug 26 21:18:00 arm kernel: [ 0.795199] msgmni has been set to 990
Aug 26 21:18:00 arm kernel: [ 0.798358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Aug 26 21:18:00 arm kernel: [ 0.798386] io scheduler noop registered
Aug 26 21:18:00 arm kernel: [ 0.798401] io scheduler deadline registered
Aug 26 21:18:00 arm kernel: [ 0.798444] io scheduler cfq registered (default)
Aug 26 21:18:00 arm kernel: [ 0.800544] tps65217-bl tps65217-bl: no platform data provided
Aug 26 21:18:00 arm kernel: [ 0.800589] tps65217-bl: probe of tps65217-bl failed with error -22
Aug 26 21:18:00 arm kernel: [ 0.801457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 26 21:18:00 arm kernel: [ 0.804200] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
Aug 26 21:18:00 arm kernel: [ 0.804529] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
Aug 26 21:18:00 arm kernel: [ 1.541963] console [ttyO0] enabled
Aug 26 21:18:00 arm kernel: [ 1.546956] [drm] Initialized drm 1.1.0 20060810
Aug 26 21:18:00 arm kernel: [ 1.565330] brd: module loaded
Aug 26 21:18:00 arm kernel: [ 1.575542] loop: module loaded
Aug 26 21:18:00 arm kernel: [ 1.579027] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.586330] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.593619] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.600902] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.608214] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.622567] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5C,2613BBBK6613'
Aug 26 21:18:00 arm kernel: [ 1.630368] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
Aug 26 21:18:00 arm kernel: [ 1.668787] bone-capemgr bone_capemgr.8: slot #0: No cape found
Aug 26 21:18:00 arm kernel: [ 1.705891] bone-capemgr bone_capemgr.8: slot #1: No cape found
Aug 26 21:18:00 arm kernel: [ 1.743001] bone-capemgr bone_capemgr.8: slot #2: No cape found
Aug 26 21:18:00 arm kernel: [ 1.780110] bone-capemgr bone_capemgr.8: slot #3: No cape found
Aug 26 21:18:00 arm kernel: [ 1.786374] bone-capemgr bone_capemgr.8: slot #4: specific override
Aug 26 21:18:00 arm kernel: [ 1.792984] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
Aug 26 21:18:00 arm kernel: [ 1.801028] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
Aug 26 21:18:00 arm kernel: [ 1.811181] bone-capemgr bone_capemgr.8: slot #5: specific override
Aug 26 21:18:00 arm kernel: [ 1.817784] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
Aug 26 21:18:00 arm kernel: [ 1.825825] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
Aug 26 21:18:00 arm kernel: [ 1.835888] bone-capemgr bone_capemgr.8: slot #6: specific override
Aug 26 21:18:00 arm kernel: [ 1.842493] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
Aug 26 21:18:00 arm kernel: [ 1.850536] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
Aug 26 21:18:00 arm kernel: [ 1.861163] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.870051] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.878945] bone-capemgr bone_capemgr.8: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.887723] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.896435] bone-capemgr bone_capemgr.8: initialized OK.
Aug 26 21:18:00 arm kernel: [ 1.902043] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.910902] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.921733] OneNAND driver initializing
Aug 26 21:18:00 arm kernel: [ 1.927341] usbcore: registered new interface driver cdc_ether
Aug 26 21:18:00 arm kernel: [ 1.933533] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.942318] bone-capemgr bone_capemgr.8: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.951078] usbcore: registered new interface driver rndis_host
Aug 26 21:18:00 arm kernel: [ 1.957390] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.966277] usbcore: registered new interface driver cdc_ncm
Aug 26 21:18:00 arm kernel: [ 1.972265] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
Aug 26 21:18:00 arm kernel: [ 1.986676] usbcore: registered new interface driver cdc_acm
Aug 26 21:18:00 arm kernel: [ 1.992658] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Aug 26 21:18:00 arm kernel: [ 2.001100] Initializing USB Mass Storage driver...
Aug 26 21:18:00 arm kernel: [ 2.006494] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.017252] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
Aug 26 21:18:00 arm kernel: [ 2.031534] usbcore: registered new interface driver usb-storage
Aug 26 21:18:00 arm kernel: [ 2.037857] USB Mass Storage support registered.
Aug 26 21:18:00 arm kernel: [ 2.043036] bone-capemgr bone_capemgr.8: slot #4: #2 overlays
Aug 26 21:18:00 arm kernel: [ 2.050064] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays.
Aug 26 21:18:00 arm kernel: [ 2.056967] bone-capemgr bone_capemgr.8: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 2.065698] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.074501] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.085960] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
Aug 26 21:18:00 arm kernel: [ 2.092788] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
Aug 26 21:18:00 arm kernel: [ 2.098035] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Aug 26 21:18:00 arm kernel: [ 2.107786] bone-capemgr bone_capemgr.8: slot #5: #4 overlays
Aug 26 21:18:00 arm kernel: [ 2.116375] platform 4830e000.fb: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 2.122265] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Aug 26 21:18:00 arm kernel: [ 2.122287] musb-hdrc: MHDRC RTL version 2.0
Aug 26 21:18:00 arm kernel: [ 2.122302] musb-hdrc: setup fifo_mode 4
Aug 26 21:18:00 arm kernel: [ 2.122329] musb-hdrc: 28/31 max ep, 16384/16384 memory
Aug 26 21:18:00 arm kernel: [ 2.122478] musb-hdrc musb-hdrc.0.auto: *** mode=3
Aug 26 21:18:00 arm kernel: [ 2.127560] musb-hdrc musb-hdrc.0.auto: *** power=250
Aug 26 21:18:00 arm kernel: [ 2.134606] bone-capemgr bone_capemgr.8: slot #5: Applied #4 overlays.
Aug 26 21:18:00 arm kernel: [ 2.141513] bone-capemgr bone_capemgr.8: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 2.150142] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.159714] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
Aug 26 21:18:00 arm kernel: [ 2.164987] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Aug 26 21:18:00 arm kernel: [ 2.173795] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.182613] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
Aug 26 21:18:00 arm kernel: [ 2.196946] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Aug 26 21:18:00 arm kernel: [ 2.196965] musb-hdrc: MHDRC RTL version 2.0
Aug 26 21:18:00 arm kernel: [ 2.196979] musb-hdrc: setup fifo_mode 4
Aug 26 21:18:00 arm kernel: [ 2.197001] musb-hdrc: 28/31 max ep, 16384/16384 memory
Aug 26 21:18:00 arm kernel: [ 2.197138] musb-hdrc musb-hdrc.1.auto: *** mode=1
Aug 26 21:18:00 arm kernel: [ 2.202193] musb-hdrc musb-hdrc.1.auto: *** power=250
Aug 26 21:18:00 arm kernel: [ 2.207512] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 2.213776] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.225674] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
Aug 26 21:18:00 arm kernel: [ 2.233967] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
Aug 26 21:18:00 arm kernel: [ 2.234083] usb usb1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 2.234141] usb usb1: udev 1, busnum 1, minor = 0
Aug 26 21:18:00 arm kernel: [ 2.234163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 26 21:18:00 arm kernel: [ 2.241331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 26 21:18:00 arm kernel: [ 2.248921] usb usb1: Product: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 2.254147] usb usb1: Manufacturer: Linux 3.8.13-bone26 musb-hcd
Aug 26 21:18:00 arm kernel: [ 2.260459] usb usb1: SerialNumber: musb-hdrc.1.auto
Aug 26 21:18:00 arm kernel: [ 2.266047] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
Aug 26 21:18:00 arm kernel: [ 2.275681] bone-capemgr bone_capemgr.8: slot #6: Failed verification
Aug 26 21:18:00 arm kernel: [ 2.282460] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.293016] usb usb1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 2.293048] usb usb1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 2.293125] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 2.293310] hub 1-0:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 2.293332] hub 1-0:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 2.293360] hub 1-0:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 2.297439] hub 1-0:1.0: 1 port detected
Aug 26 21:18:00 arm kernel: [ 2.301620] hub 1-0:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 2.301639] hub 1-0:1.0: individual port power switching
Aug 26 21:18:00 arm kernel: [ 2.301656] hub 1-0:1.0: no over-current protection
Aug 26 21:18:00 arm kernel: [ 2.301672] hub 1-0:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 2.301691] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
Aug 26 21:18:00 arm kernel: [ 2.301709] hub 1-0:1.0: power on to power good time: 10ms
Aug 26 21:18:00 arm kernel: [ 2.301752] hub 1-0:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 2.301855] hub 1-0:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 2.302977] mousedev: PS/2 mouse device common for all mice
Aug 26 21:18:00 arm kernel: [ 2.311581] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
Aug 26 21:18:00 arm kernel: [ 2.319455] i2c /dev entries driver
Aug 26 21:18:00 arm kernel: [ 2.324808] pps_ldisc: PPS line discipline registered
Aug 26 21:18:00 arm kernel: [ 2.330317] Driver for 1-wire Dallas network protocol.
Aug 26 21:18:00 arm kernel: [ 2.337612] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Aug 26 21:18:00 arm kernel: [ 2.345638] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
Aug 26 21:18:00 arm kernel: [ 2.354633] cpuidle: using governor ladder
Aug 26 21:18:00 arm kernel: [ 2.358994] cpuidle: using governor menu
Aug 26 21:18:00 arm kernel: [ 2.363553] of_get_named_gpio_flags exited with status 6
Aug 26 21:18:00 arm kernel: [ 2.363572] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.363587] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.363623] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
Aug 26 21:18:00 arm kernel: [ 2.370867] omap_hsmmc mmc.4: Failed to get rstctl; not using any
Aug 26 21:18:00 arm kernel: [ 2.377778] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
Aug 26 21:18:00 arm kernel: [ 2.384993] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
Aug 26 21:18:00 arm kernel: [ 2.392380] mmc.4 supply vmmc_aux not found, using dummy regulator
Aug 26 21:18:00 arm kernel: [ 2.399422] omap_hsmmc mmc.4: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.406360] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
Aug 26 21:18:00 arm kernel: [ 2.406445] hub 1-0:1.0: hub_suspend
Aug 26 21:18:00 arm kernel: [ 2.406489] usb usb1: bus auto-suspend, wakeup 1
Aug 26 21:18:00 arm kernel: [ 2.432727] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432750] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432765] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432816] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.439026] omap_hsmmc mmc.10: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.446986] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.453441] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
Aug 26 21:18:00 arm kernel: [ 2.460571] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
Aug 26 21:18:00 arm kernel: [ 2.468122] mmc.10 supply vmmc_aux not found, using dummy regulator
Aug 26 21:18:00 arm kernel: [ 2.474850] omap_hsmmc mmc.10: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.509173] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
Aug 26 21:18:00 arm kernel: [ 2.520954] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
Aug 26 21:18:00 arm kernel: [ 2.528284] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Aug 26 21:18:00 arm kernel: [ 2.537338] usb usb1: usb wakeup-resume
Aug 26 21:18:00 arm kernel: [ 2.537386] usb usb1: usb auto-resume
Aug 26 21:18:00 arm kernel: [ 2.537417] hub 1-0:1.0: hub_resume
Aug 26 21:18:00 arm kernel: [ 2.537467] hub 1-0:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 2.537719] leds-gpio gpio-leds.7: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.545026] of_get_named_gpio_flags exited with status 53
Aug 26 21:18:00 arm kernel: [ 2.545050] of_get_named_gpio_flags exited with status 54
Aug 26 21:18:00 arm kernel: [ 2.545069] of_get_named_gpio_flags exited with status 55
Aug 26 21:18:00 arm kernel: [ 2.545088] of_get_named_gpio_flags exited with status 56
Aug 26 21:18:00 arm kernel: [ 2.545243] of_get_named_gpio_flags exited with status 53
Aug 26 21:18:00 arm kernel: [ 2.545491] of_get_named_gpio_flags exited with status 54
Aug 26 21:18:00 arm kernel: [ 2.545757] of_get_named_gpio_flags exited with status 55
Aug 26 21:18:00 arm kernel: [ 2.545945] of_get_named_gpio_flags exited with status 56
Aug 26 21:18:00 arm kernel: [ 2.546569] ledtrig-cpu: registered to indicate activity on CPUs
Aug 26 21:18:00 arm kernel: [ 2.553457] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
Aug 26 21:18:00 arm kernel: [ 2.560753] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Aug 26 21:18:00 arm kernel: [ 2.569413] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Aug 26 21:18:00 arm kernel: [ 2.575765] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
Aug 26 21:18:00 arm kernel: [ 2.583019] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
Aug 26 21:18:00 arm kernel: [ 2.591528] usbcore: registered new interface driver usbhid
Aug 26 21:18:00 arm kernel: [ 2.597446] usbhid: USB HID core driver
Aug 26 21:18:00 arm kernel: [ 2.603052] ashmem: initialized
Aug 26 21:18:00 arm kernel: [ 2.606924] logger: created 256K log 'log_main'
Aug 26 21:18:00 arm kernel: [ 2.612223] logger: created 256K log 'log_events'
Aug 26 21:18:00 arm kernel: [ 2.617645] logger: created 256K log 'log_radio'
Aug 26 21:18:00 arm kernel: [ 2.622852] logger: created 256K log 'log_system'
Aug 26 21:18:00 arm kernel: [ 2.631042] of_get_named_gpio_flags exited with status 59
Aug 26 21:18:00 arm kernel: [ 2.632703] davinci_evm sound.13: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
Aug 26 21:18:00 arm kernel: [ 2.640473] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Aug 26 21:18:00 arm kernel: [ 2.640543] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 2.643480] mmc1: BKOPS_EN bit is not set
Aug 26 21:18:00 arm kernel: [ 2.648827] TCP: cubic registered
Aug 26 21:18:00 arm kernel: [ 2.652517] NET: Registered protocol family 10
Aug 26 21:18:00 arm kernel: [ 2.658825] NET: Registered protocol family 17
Aug 26 21:18:00 arm kernel: [ 2.664136] mmc1: new high speed MMC card at address 0001
Aug 26 21:18:00 arm kernel: [ 2.670047] Key type dns_resolver registered
Aug 26 21:18:00 arm kernel: [ 2.678881] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
Aug 26 21:18:00 arm kernel: [ 2.674892] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Aug 26 21:18:00 arm kernel: [ 2.688773] ThumbEE CPU extension supported.
Aug 26 21:18:00 arm kernel: [ 2.693800] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
Aug 26 21:18:00 arm kernel: [ 2.700431] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
Aug 26 21:18:00 arm kernel: [ 2.706705] Registering SWP/SWPB emulation handler
Aug 26 21:18:00 arm kernel: [ 2.713914] registered taskstats version 1
Aug 26 21:18:00 arm kernel: [ 2.718522] mmcblk0: p1 p2
Aug 26 21:18:00 arm kernel: [ 2.726431] mmcblk0boot1: unknown partition table
Aug 26 21:18:00 arm kernel: [ 2.731785] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.731815] tilcdc 4830e000.fb: No power control GPIO
Aug 26 21:18:00 arm kernel: [ 2.739715] mmcblk0boot0: unknown partition table
Aug 26 21:18:00 arm kernel: [ 2.745043] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 2.871141] tilcdc 4830e000.fb: found TDA19988
Aug 26 21:18:00 arm kernel: [ 2.876618] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Aug 26 21:18:00 arm kernel: [ 2.883613] [drm] No driver support for vblank timestamp query.
Aug 26 21:18:00 arm kernel: [ 2.890359] tilcdc 4830e000.fb: No connectors reported connected with modes
Aug 26 21:18:00 arm kernel: [ 2.897774] [drm] Cannot find any crtc or sizes - going 1024x768
Aug 26 21:18:00 arm kernel: [ 2.907464] usb 1-1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 2.907989] usb 1-1: udev 2, busnum 1, minor = 1
Aug 26 21:18:00 arm kernel: [ 2.908017] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Aug 26 21:18:00 arm kernel: [ 2.915089] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 26 21:18:00 arm kernel: [ 2.922584] usb 1-1: Product: USB2.0 Hub
Aug 26 21:18:00 arm kernel: [ 2.937185] Console: switching to colour frame buffer device 128x48
Aug 26 21:18:00 arm kernel: [ 2.952926] tilcdc 4830e000.fb: fb0: frame buffer device
Aug 26 21:18:00 arm kernel: [ 2.958605] tilcdc 4830e000.fb: registered panic notifier
Aug 26 21:18:00 arm kernel: [ 2.964876] usb 1-1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 2.964908] usb 1-1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 2.965039] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
Aug 26 21:18:00 arm kernel: [ 2.971330] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 2.971587] hub 1-1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 2.971610] hub 1-1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 2.971643] hub 1-1:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 2.991061] hub 1-1:1.0: 4 ports detected
Aug 26 21:18:00 arm kernel: [ 2.995346] hub 1-1:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 2.995368] hub 1-1:1.0: ganged power switching
Aug 26 21:18:00 arm kernel: [ 2.995384] hub 1-1:1.0: global over-current protection
Aug 26 21:18:00 arm kernel: [ 2.995400] hub 1-1:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 2.995420] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Aug 26 21:18:00 arm kernel: [ 2.995436] hub 1-1:1.0: Port indicators are supported
Aug 26 21:18:00 arm kernel: [ 2.995453] hub 1-1:1.0: power on to power good time: 100ms
Aug 26 21:18:00 arm kernel: [ 2.995897] hub 1-1:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 2.995922] hub 1-1:1.0: no over-current condition exists
Aug 26 21:18:00 arm kernel: [ 2.996245] hub 1-1:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 2.997804] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Aug 26 21:18:00 arm kernel: [ 2.997859] hub 1-0:1.0: port 1 enable change, status 00000503
Aug 26 21:18:00 arm kernel: [ 3.030130] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
Aug 26 21:18:00 arm kernel: [ 3.036550] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
Aug 26 21:18:00 arm kernel: [ 3.053641] libphy: 4a101000.mdio: probed
Aug 26 21:18:00 arm kernel: [ 3.057923] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Aug 26 21:18:00 arm kernel: [ 3.067838] Detected MACID = 90:59:af:55:5c:07
Aug 26 21:18:00 arm kernel: [ 3.072544] cpsw 4a100000.ethernet: NAPI disabled
Aug 26 21:18:00 arm kernel: [ 3.079715] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
Aug 26 21:18:00 arm kernel: [ 3.096115] ALSA device list:
Aug 26 21:18:00 arm kernel: [ 3.099333] #0: TI BeagleBone Black
Aug 26 21:18:00 arm kernel: [ 3.104066] Freeing init memory: 292K
Aug 26 21:18:00 arm kernel: [ 3.108020] hub 1-1:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.108546] hub 1-1:1.0: port 2: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.109086] hub 1-1:1.0: port 3: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.209957] hub 1-1:1.0: state 7 ports 4 chg 000e evt 0000
Aug 26 21:18:00 arm kernel: [ 3.210279] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.276557] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.373985] usb 1-1.1: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 3.375450] usb 1-1.1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.379971] usb 1-1.1: udev 3, busnum 1, minor = 2
Aug 26 21:18:00 arm kernel: [ 3.379996] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 3.387257] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 3.394924] usb 1-1.1: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 3.399679] usb 1-1.1: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 3.403886] usb 1-1.1: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 3.413442] usb 1-1.1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.413471] usb 1-1.1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.414992] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.418085] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.483602] usb 1-1.2: new full-speed USB device number 4 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.577100] usb 1-1.2: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 3.578588] usb 1-1.2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.583198] usb 1-1.2: udev 4, busnum 1, minor = 3
Aug 26 21:18:00 arm kernel: [ 3.583221] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 3.590484] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 3.598149] usb 1-1.2: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 3.602904] usb 1-1.2: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 3.607110] usb 1-1.2: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 3.618527] usb 1-1.2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.618556] usb 1-1.2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.619095] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.622442] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.688652] usb 1-1.3: new high-speed USB device number 5 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.783270] usb 1-1.3: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.783605] usb 1-1.3: udev 5, busnum 1, minor = 4
Aug 26 21:18:00 arm kernel: [ 3.783622] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
Aug 26 21:18:00 arm kernel: [ 3.790905] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 26 21:18:00 arm kernel: [ 3.798572] usb 1-1.3: Product: USB2.0 Hub
Aug 26 21:18:00 arm kernel: [ 3.808952] usb 1-1.3: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.808979] usb 1-1.3: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.811004] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.811667] hub 1-1.3:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 3.811684] hub 1-1.3:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 3.811709] hub 1-1.3:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 3.821993] hub 1-1.3:1.0: 4 ports detected
Aug 26 21:18:00 arm kernel: [ 3.832328] hub 1-1.3:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 3.832352] hub 1-1.3:1.0: ganged power switching
Aug 26 21:18:00 arm kernel: [ 3.832362] hub 1-1.3:1.0: global over-current protection
Aug 26 21:18:00 arm kernel: [ 3.832388] hub 1-1.3:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 3.832401] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
Aug 26 21:18:00 arm kernel: [ 3.832411] hub 1-1.3:1.0: Port indicators are supported
Aug 26 21:18:00 arm kernel: [ 3.832420] hub 1-1.3:1.0: power on to power good time: 100ms
Aug 26 21:18:00 arm kernel: [ 3.833398] hub 1-1.3:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 3.833417] hub 1-1.3:1.0: no over-current condition exists
Aug 26 21:18:00 arm kernel: [ 3.833646] hub 1-1.3:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 3.835498] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
Aug 26 21:18:00 arm kernel: [ 3.936767] hub 1-1.3:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.937320] hub 1-1.3:1.0: port 2: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 4.038143] hub 1-1.3:1.0: state 7 ports 4 chg 0006 evt 0000
Aug 26 21:18:00 arm kernel: [ 4.038455] hub 1-1.3:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 4.104733] usb 1-1.3.1: new full-speed USB device number 6 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 4.198192] usb 1-1.3.1: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 4.199727] usb 1-1.3.1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 4.204350] usb 1-1.3.1: udev 6, busnum 1, minor = 5
Aug 26 21:18:00 arm kernel: [ 4.204377] usb 1-1.3.1: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 4.211829] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 4.219678] usb 1-1.3.1: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 4.224614] usb 1-1.3.1: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 4.229005] usb 1-1.3.1: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 4.239658] usb 1-1.3.1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 4.239687] usb 1-1.3.1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 4.241187] usb 1-1.3.1: adding 1-1.3.1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 4.244392] hub 1-1.3:1.0: port 2, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 4.311802] usb 1-1.3.2: new full-speed USB device number 7 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 4.405403] usb 1-1.3.2: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 4.406819] usb 1-1.3.2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 4.411352] usb 1-1.3.2: udev 7, busnum 1, minor = 6
Aug 26 21:18:00 arm kernel: [ 4.411376] usb 1-1.3.2: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 4.418826] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 4.426675] usb 1-1.3.2: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 4.431611] usb 1-1.3.2: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 4.436000] usb 1-1.3.2: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 4.446607] usb 1-1.3.2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 4.446635] usb 1-1.3.2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 4.448157] usb 1-1.3.2: adding 1-1.3.2:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 4.450930] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0004
Aug 26 21:18:00 arm kernel: [ 4.747145] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Aug 26 21:18:00 arm kernel: [ 4.754851] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Aug 26 21:18:00 arm kernel: [ 5.554321] EXT4-fs (mmcblk0p2): recovery complete
Aug 26 21:18:00 arm kernel: [ 5.565391] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Aug 26 21:18:00 arm kernel: [ 8.012024] usbcore: registered new interface driver usbserial
Aug 26 21:18:00 arm kernel: [ 8.079282] usbcore: registered new interface driver usbserial_generic
Aug 26 21:18:00 arm kernel: [ 8.145677] usbserial: USB Serial support registered for generic
Aug 26 21:18:00 arm kernel: [ 8.202002] usbcore: registered new interface driver ftdi_sio
Aug 26 21:18:00 arm kernel: [ 8.209988] usbserial: USB Serial support registered for FTDI USB Serial Device
Aug 26 21:18:00 arm kernel: [ 8.286130] ftdi_sio 1-1.1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.286168] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.286207] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.327609] usb 1-1.1: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.331735] usb 1-1.1: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.336231] usb 1-1.1: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.341260] usb 1-1.1: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.346286] usb 1-1.1: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.370340] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
Aug 26 21:18:00 arm kernel: [ 8.475679] ftdi_sio 1-1.2:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.475710] ftdi_sio 1-1.2:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.475744] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.635971] usb 1-1.2: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.640123] usb 1-1.2: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.644622] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.649650] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.654677] usb 1-1.2: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.704391] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
Aug 26 21:18:00 arm kernel: [ 8.744415] ftdi_sio 1-1.3.1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.744445] ftdi_sio 1-1.3.1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.744480] ftdi_sio 1-1.3.1:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.781734] usb 1-1.3.1: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.786061] usb 1-1.3.1: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.790736] usb 1-1.3.1: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.795944] usb 1-1.3.1: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.801152] usb 1-1.3.1: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.827390] usb 1-1.3.1: FTDI USB Serial Device converter now attached to ttyUSB2
Aug 26 21:18:00 arm kernel: [ 8.864284] ftdi_sio 1-1.3.2:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.864313] ftdi_sio 1-1.3.2:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.864347] ftdi_sio 1-1.3.2:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.900424] usb 1-1.3.2: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.904757] usb 1-1.3.2: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.909436] usb 1-1.3.2: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.914646] usb 1-1.3.2: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.919855] usb 1-1.3.2: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.943820] usb 1-1.3.2: FTDI USB Serial Device converter now attached to ttyUSB3
Aug 26 21:18:00 arm kernel: [ 9.881808] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Aug 26 21:18:00 arm kernel: [ 10.195918] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Aug 26 21:18:00 arm kernel: [ 15.374187] net eth0: initializing cpsw version 1.12 (0)
Aug 26 21:18:00 arm kernel: [ 15.381968] net eth0: phy found : id is : 0x7c0f1
Aug 26 21:18:00 arm kernel: [ 15.386917] libphy: PHY 4a101000.mdio:01 not found
Aug 26 21:18:00 arm kernel: [ 15.391948] net eth0: phy 4a101000.mdio:01 not found on slave 1
Aug 26 21:18:00 arm kernel: [ 15.404239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 26 21:18:00 arm kernel: [ 17.780358] gadget: using random self ethernet address
Aug 26 21:18:00 arm kernel: [ 17.832372] usb0: MAC 5e:92:47:a1:51:a9
Aug 26 21:18:00 arm kernel: [ 17.836524] usb0: HOST MAC 90:59:af:55:5c:09
Aug 26 21:18:00 arm kernel: [ 17.895493] gadget: Mass Storage Function, version: 2009/09/11
Aug 26 21:18:00 arm kernel: [ 17.901769] gadget: Number of LUNs=1
Aug 26 21:18:00 arm kernel: [ 17.963788] lun0: LUN: removable file: /dev/mmcblk0p1
Aug 26 21:18:00 arm kernel: [ 17.989460] gadget: Multifunction Composite Gadget
Aug 26 21:18:00 arm kernel: [ 18.011551] gadget: g_multi ready
Aug 26 21:18:00 arm kernel: [ 18.028312] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 18.058561] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
Aug 26 21:18:00 arm kernel: [ 18.086919] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
Aug 26 21:18:00 arm kernel: [ 18.087023] usb usb2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 18.087060] usb usb2: udev 1, busnum 2, minor = 128
Aug 26 21:18:00 arm kernel: [ 18.087074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 26 21:18:00 arm kernel: [ 18.094266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 26 21:18:00 arm kernel: [ 18.101844] usb usb2: Product: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 18.107053] usb usb2: Manufacturer: Linux 3.8.13-bone26 musb-hcd
Aug 26 21:18:00 arm kernel: [ 18.113349] usb usb2: SerialNumber: musb-hdrc.0.auto
Aug 26 21:18:00 arm kernel: [ 18.141547] usb usb2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 18.141574] usb usb2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 18.141645] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 18.141848] hub 2-0:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 18.141863] hub 2-0:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 18.141886] hub 2-0:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 18.167998] hub 2-0:1.0: 1 port detected
Aug 26 21:18:00 arm kernel: [ 18.182599] hub 2-0:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 18.182624] hub 2-0:1.0: individual port power switching
Aug 26 21:18:00 arm kernel: [ 18.182634] hub 2-0:1.0: no over-current protection
Aug 26 21:18:00 arm kernel: [ 18.182644] hub 2-0:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 18.182656] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
Aug 26 21:18:00 arm kernel: [ 18.182666] hub 2-0:1.0: power on to power good time: 10ms
Aug 26 21:18:00 arm kernel: [ 18.182715] hub 2-0:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 18.182817] hub 2-0:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 18.284098] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
Aug 26 21:18:00 arm kernel: [ 18.284163] hub 2-0:1.0: hub_suspend
Aug 26 21:18:00 arm kernel: [ 18.284191] usb usb2: bus auto-suspend, wakeup 1
Aug 26 21:18:00 arm kernel: [ 18.458373] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Aug 26 21:18:01 arm kernel: [ 18.464766] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 26 21:18:01 arm /usr/sbin/cron[2030]: (CRON) INFO (pidfile fd = 3)
Aug 26 21:18:01 arm /usr/sbin/cron[2035]: (CRON) STARTUP (fork ok)
Aug 26 21:18:02 arm /usr/sbin/cron[2035]: (CRON) INFO (Running @reboot jobs)
Aug 26 21:18:02 arm udhcpd[2152]: udhcpd (v1.20.2) started
Aug 26 21:18:02 arm udhcpd[2152]: is interface usb0 up and configured?: Cannot assign requested address
Aug 26 21:18:03 arm kernel: [ 20.470418] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Aug 26 21:18:03 arm udhcpd[2158]: udhcpd (v1.20.2) started
Aug 26 21:18:14 arm ntpdate[1581]: no server suitable for synchronization found
Aug 26 21:18:14 arm ntpdate[2169]: no server suitable for synchronization found
Aug 26 21:18:17 arm ntpd[2176]: ntpd 4.2.6p5@1.2349-o Sat May 12 10:13:58 UTC 2012 (1)
Aug 26 21:18:17 arm ntpd[2177]: proto: precision = 2.958 usec
Aug 26 21:18:17 arm ntpd[2177]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen and drop on 1 v6wildcard :: UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 2 lo 127.0.0.1 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 3 eth0 192.168.1.37 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 4 usb0 192.168.7.2 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 5 lo ::1 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 6 eth0 fe80::9259:afff:fe55:5c07 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: peers refreshed
Aug 26 21:18:17 arm ntpd[2177]: Listening on routing socket on fd #23 for interface updates
Aug 26 21:19:01 arm /USR/SBIN/CRON[2223]: (root) CMD ( /usr/local/oscam-watchdog.sh #Teste ob OScam laeuft (jede 5 Minuten))
Aug 26 21:19:01 arm /USR/SBIN/CRON[2222]: (CRON) info (No MTA installed, discarding output)
Aug 26 21:18:00 arm rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="1806" x-info="http://www.rsyslog.com"] start
Aug 26 21:18:00 arm kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Aug 26 21:18:00 arm kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 26 21:18:00 arm kernel: [ 0.000000] Linux version 3.8.13-bone26 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Fri Aug 16 20:56:24 UTC 2013
Aug 26 21:18:00 arm kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
Aug 26 21:18:00 arm kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Aug 26 21:18:00 arm kernel: [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
Aug 26 21:18:00 arm kernel: [ 0.000000] On node 0 totalpages: 130816
Aug 26 21:18:00 arm kernel: [ 0.000000] free_area_init_node: node 0, pgdat c09d0540, node_mem_map c0a4b000
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 0 pages reserved
Aug 26 21:18:00 arm kernel: [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
Aug 26 21:18:00 arm kernel: [ 0.000000] AM335X ES1.0 (neon )
Aug 26 21:18:00 arm kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e5b000 s14080 r8192 d14592 u36864
Aug 26 21:18:00 arm kernel: [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
Aug 26 21:18:00 arm kernel: [ 0.000000] pcpu-alloc: [0] 0
Aug 26 21:18:00 arm kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
Aug 26 21:18:00 arm kernel: [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=36b1cde2-644d-4bd6-9e25-11e7f0f6d92c ro rootfstype=ext4 rootwait fixrtc ip=
Aug 26 21:18:00 arm kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 26 21:18:00 arm kernel: [ 0.000000] __ex_table already sorted, skipping sort
Aug 26 21:18:00 arm kernel: [ 0.000000] allocated 1048576 bytes of page_cgroup
Aug 26 21:18:00 arm kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory: 511MB = 511MB total
Aug 26 21:18:00 arm kernel: [ 0.000000] Memory: 504624k/504624k available, 19664k reserved, 0K highmem
Aug 26 21:18:00 arm kernel: [ 0.000000] Virtual kernel memory layout:
Aug 26 21:18:00 arm kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .text : 0xc0008000 - 0xc0904ad0 (9203 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .init : 0xc0905000 - 0xc094e700 ( 294 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .data : 0xc0950000 - 0xc09d3500 ( 526 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] .bss : 0xc09d3500 - 0xc0a4a900 ( 477 kB)
Aug 26 21:18:00 arm kernel: [ 0.000000] Hierarchical RCU implementation.
Aug 26 21:18:00 arm kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Aug 26 21:18:00 arm kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
Aug 26 21:18:00 arm kernel: [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Aug 26 21:18:00 arm kernel: [ 0.000000] Total of 128 interrupts on 1 active controller
Aug 26 21:18:00 arm kernel: [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
Aug 26 21:18:00 arm kernel: [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Aug 26 21:18:00 arm kernel: [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
Aug 26 21:18:00 arm kernel: [ 0.000000] Console: colour dummy device 80x30
Aug 26 21:18:00 arm kernel: [ 0.000381] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
Aug 26 21:18:00 arm kernel: [ 0.017383] pid_max: default: 32768 minimum: 301
Aug 26 21:18:00 arm kernel: [ 0.017635] Security Framework initialized
Aug 26 21:18:00 arm kernel: [ 0.017734] Mount-cache hash table entries: 512
Aug 26 21:18:00 arm kernel: [ 0.027626] Initializing cgroup subsys cpuacct
Aug 26 21:18:00 arm kernel: [ 0.027664] Initializing cgroup subsys memory
Aug 26 21:18:00 arm kernel: [ 0.027732] Initializing cgroup subsys blkio
Aug 26 21:18:00 arm kernel: [ 0.027877] CPU: Testing write buffer coherency: ok
Aug 26 21:18:00 arm kernel: [ 0.028463] CPU0: thread -1, cpu 0, socket -1, mpidr 0
Aug 26 21:18:00 arm kernel: [ 0.028541] Setting up static identity map for 0x80634640 - 0x80634698
Aug 26 21:18:00 arm kernel: [ 0.030218] Brought up 1 CPUs
Aug 26 21:18:00 arm kernel: [ 0.030243] SMP: Total of 1 processors activated (363.67 BogoMIPS).
Aug 26 21:18:00 arm kernel: [ 0.031605] devtmpfs: initialized
Aug 26 21:18:00 arm kernel: [ 0.095851] pinctrl core: initialized pinctrl subsystem
Aug 26 21:18:00 arm kernel: [ 0.096087] rstctl core: initialized rstctl subsystem
Aug 26 21:18:00 arm kernel: [ 0.096589] regulator-dummy: no parameters
Aug 26 21:18:00 arm kernel: [ 0.097159] NET: Registered protocol family 16
Aug 26 21:18:00 arm kernel: [ 0.098134] DMA: preallocated 256 KiB pool for atomic coherent allocations
Aug 26 21:18:00 arm kernel: [ 0.108124] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
Aug 26 21:18:00 arm kernel: [ 0.108886] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.108917] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.108941] platform 49000000.edma: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 0.110170] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.110346] OMAP GPIO hardware version 0.1
Aug 26 21:18:00 arm kernel: [ 0.111871] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.113214] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.114533] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
Aug 26 21:18:00 arm kernel: [ 0.115209] of_get_named_gpio_flags exited with status 52
Aug 26 21:18:00 arm kernel: [ 0.115242] gpio-rctrl rstctl.3: loaded OK
Aug 26 21:18:00 arm kernel: [ 0.120515] hw-breakpoint: debug architecture 0x4 unsupported.
Aug 26 21:18:00 arm kernel: [ 0.122668] cpsw.0: No hwaddr in dt. Using 90:59:af:55:5c:07 from efuse
Aug 26 21:18:00 arm kernel: [ 0.122700] cpsw.1: No hwaddr in dt. Using 90:59:af:55:5c:09 from efuse
Aug 26 21:18:00 arm kernel: [ 0.136921] bio: create slab <bio-0> at 0
Aug 26 21:18:00 arm kernel: [ 0.148496] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
Aug 26 21:18:00 arm kernel: [ 0.148734] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 0.148963] vmmcsd_fixed: 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.151744] SCSI subsystem initialized
Aug 26 21:18:00 arm kernel: [ 0.152223] usbcore: registered new interface driver usbfs
Aug 26 21:18:00 arm kernel: [ 0.152334] usbcore: registered new interface driver hub
Aug 26 21:18:00 arm kernel: [ 0.152651] usbcore: registered new device driver usb
Aug 26 21:18:00 arm kernel: [ 0.154794] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
Aug 26 21:18:00 arm kernel: [ 0.156406] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
Aug 26 21:18:00 arm kernel: [ 0.158737] DCDC1: at 1500 mV
Aug 26 21:18:00 arm kernel: [ 0.159895] vdd_mpu: 925 <--> 1325 mV at 1100 mV
Aug 26 21:18:00 arm kernel: [ 0.161090] vdd_core: 925 <--> 1150 mV at 1100 mV
Aug 26 21:18:00 arm kernel: [ 0.162273] LDO1: at 1800 mV
Aug 26 21:18:00 arm kernel: [ 0.163354] LDO2: at 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.165364] LDO3: 1800 mV
Aug 26 21:18:00 arm kernel: [ 0.166527] LDO4: at 3300 mV
Aug 26 21:18:00 arm kernel: [ 0.167527] tps65217 0-0024: TPS65217 ID 0xe version 1.2
Aug 26 21:18:00 arm kernel: [ 0.168357] omap_i2c 44e0b000.i2c: unable to select pin group
Aug 26 21:18:00 arm kernel: [ 0.169167] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
Aug 26 21:18:00 arm kernel: [ 0.171757] omap_i2c 4819c000.i2c: unable to select pin group
Aug 26 21:18:00 arm kernel: [ 0.172003] media: Linux media interface: v0.10
Aug 26 21:18:00 arm kernel: [ 0.172105] Linux video capture interface: v2.00
Aug 26 21:18:00 arm kernel: [ 0.172241] pps_core: LinuxPPS API ver. 1 registered
Aug 26 21:18:00 arm kernel: [ 0.172258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Aug 26 21:18:00 arm kernel: [ 0.172951] Advanced Linux Sound Architecture Driver Initialized.
Aug 26 21:18:00 arm kernel: [ 0.174015] NetLabel: Initializing
Aug 26 21:18:00 arm kernel: [ 0.174035] NetLabel: domain hash size = 128
Aug 26 21:18:00 arm kernel: [ 0.174046] NetLabel: protocols = UNLABELED CIPSOv4
Aug 26 21:18:00 arm kernel: [ 0.174163] NetLabel: unlabeled traffic allowed by default
Aug 26 21:18:00 arm kernel: [ 0.174513] Switching to clocksource gp_timer
Aug 26 21:18:00 arm kernel: [ 0.230351] NET: Registered protocol family 2
Aug 26 21:18:00 arm kernel: [ 0.231553] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Aug 26 21:18:00 arm kernel: [ 0.231696] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Aug 26 21:18:00 arm kernel: [ 0.231844] TCP: Hash tables configured (established 4096 bind 4096)
Aug 26 21:18:00 arm kernel: [ 0.231945] TCP: reno registered
Aug 26 21:18:00 arm kernel: [ 0.231972] UDP hash table entries: 256 (order: 1, 12288 bytes)
Aug 26 21:18:00 arm kernel: [ 0.232015] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
Aug 26 21:18:00 arm kernel: [ 0.232445] NET: Registered protocol family 1
Aug 26 21:18:00 arm kernel: [ 0.233062] RPC: Registered named UNIX socket transport module.
Aug 26 21:18:00 arm kernel: [ 0.233084] RPC: Registered udp transport module.
Aug 26 21:18:00 arm kernel: [ 0.233097] RPC: Registered tcp transport module.
Aug 26 21:18:00 arm kernel: [ 0.233109] RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 26 21:18:00 arm kernel: [ 0.233574] Trying to unpack rootfs image as initramfs...
Aug 26 21:18:00 arm kernel: [ 0.524361] Freeing initrd memory: 2444K
Aug 26 21:18:00 arm kernel: [ 0.525189] CPU PMU: probing PMU on CPU 0
Aug 26 21:18:00 arm kernel: [ 0.525225] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Aug 26 21:18:00 arm kernel: [ 0.525782] omap2_mbox_probe: platform not supported
Aug 26 21:18:00 arm kernel: [ 0.792293] VFS: Disk quotas dquot_6.5.2
Aug 26 21:18:00 arm kernel: [ 0.792553] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 26 21:18:00 arm kernel: [ 0.793920] NFS: Registering the id_resolver key type
Aug 26 21:18:00 arm kernel: [ 0.794037] Key type id_resolver registered
Aug 26 21:18:00 arm kernel: [ 0.794054] Key type id_legacy registered
Aug 26 21:18:00 arm kernel: [ 0.794122] fuse init (API version 7.20)
Aug 26 21:18:00 arm kernel: [ 0.795021] Btrfs loaded
Aug 26 21:18:00 arm kernel: [ 0.795199] msgmni has been set to 990
Aug 26 21:18:00 arm kernel: [ 0.798358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Aug 26 21:18:00 arm kernel: [ 0.798386] io scheduler noop registered
Aug 26 21:18:00 arm kernel: [ 0.798401] io scheduler deadline registered
Aug 26 21:18:00 arm kernel: [ 0.798444] io scheduler cfq registered (default)
Aug 26 21:18:00 arm kernel: [ 0.800544] tps65217-bl tps65217-bl: no platform data provided
Aug 26 21:18:00 arm kernel: [ 0.800589] tps65217-bl: probe of tps65217-bl failed with error -22
Aug 26 21:18:00 arm kernel: [ 0.801457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 26 21:18:00 arm kernel: [ 0.804200] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
Aug 26 21:18:00 arm kernel: [ 0.804529] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
Aug 26 21:18:00 arm kernel: [ 1.541963] console [ttyO0] enabled
Aug 26 21:18:00 arm kernel: [ 1.546956] [drm] Initialized drm 1.1.0 20060810
Aug 26 21:18:00 arm kernel: [ 1.565330] brd: module loaded
Aug 26 21:18:00 arm kernel: [ 1.575542] loop: module loaded
Aug 26 21:18:00 arm kernel: [ 1.579027] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.586330] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.593619] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.600902] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.608214] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
Aug 26 21:18:00 arm kernel: [ 1.622567] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5C,2613BBBK6613'
Aug 26 21:18:00 arm kernel: [ 1.630368] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
Aug 26 21:18:00 arm kernel: [ 1.668787] bone-capemgr bone_capemgr.8: slot #0: No cape found
Aug 26 21:18:00 arm kernel: [ 1.705891] bone-capemgr bone_capemgr.8: slot #1: No cape found
Aug 26 21:18:00 arm kernel: [ 1.743001] bone-capemgr bone_capemgr.8: slot #2: No cape found
Aug 26 21:18:00 arm kernel: [ 1.780110] bone-capemgr bone_capemgr.8: slot #3: No cape found
Aug 26 21:18:00 arm kernel: [ 1.786374] bone-capemgr bone_capemgr.8: slot #4: specific override
Aug 26 21:18:00 arm kernel: [ 1.792984] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
Aug 26 21:18:00 arm kernel: [ 1.801028] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
Aug 26 21:18:00 arm kernel: [ 1.811181] bone-capemgr bone_capemgr.8: slot #5: specific override
Aug 26 21:18:00 arm kernel: [ 1.817784] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
Aug 26 21:18:00 arm kernel: [ 1.825825] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
Aug 26 21:18:00 arm kernel: [ 1.835888] bone-capemgr bone_capemgr.8: slot #6: specific override
Aug 26 21:18:00 arm kernel: [ 1.842493] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
Aug 26 21:18:00 arm kernel: [ 1.850536] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
Aug 26 21:18:00 arm kernel: [ 1.861163] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.870051] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.878945] bone-capemgr bone_capemgr.8: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.887723] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.896435] bone-capemgr bone_capemgr.8: initialized OK.
Aug 26 21:18:00 arm kernel: [ 1.902043] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.910902] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.921733] OneNAND driver initializing
Aug 26 21:18:00 arm kernel: [ 1.927341] usbcore: registered new interface driver cdc_ether
Aug 26 21:18:00 arm kernel: [ 1.933533] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.942318] bone-capemgr bone_capemgr.8: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 1.951078] usbcore: registered new interface driver rndis_host
Aug 26 21:18:00 arm kernel: [ 1.957390] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 1.966277] usbcore: registered new interface driver cdc_ncm
Aug 26 21:18:00 arm kernel: [ 1.972265] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
Aug 26 21:18:00 arm kernel: [ 1.986676] usbcore: registered new interface driver cdc_acm
Aug 26 21:18:00 arm kernel: [ 1.992658] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Aug 26 21:18:00 arm kernel: [ 2.001100] Initializing USB Mass Storage driver...
Aug 26 21:18:00 arm kernel: [ 2.006494] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.017252] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
Aug 26 21:18:00 arm kernel: [ 2.031534] usbcore: registered new interface driver usb-storage
Aug 26 21:18:00 arm kernel: [ 2.037857] USB Mass Storage support registered.
Aug 26 21:18:00 arm kernel: [ 2.043036] bone-capemgr bone_capemgr.8: slot #4: #2 overlays
Aug 26 21:18:00 arm kernel: [ 2.050064] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays.
Aug 26 21:18:00 arm kernel: [ 2.056967] bone-capemgr bone_capemgr.8: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 2.065698] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.074501] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.085960] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
Aug 26 21:18:00 arm kernel: [ 2.092788] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
Aug 26 21:18:00 arm kernel: [ 2.098035] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Aug 26 21:18:00 arm kernel: [ 2.107786] bone-capemgr bone_capemgr.8: slot #5: #4 overlays
Aug 26 21:18:00 arm kernel: [ 2.116375] platform 4830e000.fb: alias fck already exists
Aug 26 21:18:00 arm kernel: [ 2.122265] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Aug 26 21:18:00 arm kernel: [ 2.122287] musb-hdrc: MHDRC RTL version 2.0
Aug 26 21:18:00 arm kernel: [ 2.122302] musb-hdrc: setup fifo_mode 4
Aug 26 21:18:00 arm kernel: [ 2.122329] musb-hdrc: 28/31 max ep, 16384/16384 memory
Aug 26 21:18:00 arm kernel: [ 2.122478] musb-hdrc musb-hdrc.0.auto: *** mode=3
Aug 26 21:18:00 arm kernel: [ 2.127560] musb-hdrc musb-hdrc.0.auto: *** power=250
Aug 26 21:18:00 arm kernel: [ 2.134606] bone-capemgr bone_capemgr.8: slot #5: Applied #4 overlays.
Aug 26 21:18:00 arm kernel: [ 2.141513] bone-capemgr bone_capemgr.8: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
Aug 26 21:18:00 arm kernel: [ 2.150142] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.159714] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
Aug 26 21:18:00 arm kernel: [ 2.164987] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
Aug 26 21:18:00 arm kernel: [ 2.173795] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.182613] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
Aug 26 21:18:00 arm kernel: [ 2.196946] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
Aug 26 21:18:00 arm kernel: [ 2.196965] musb-hdrc: MHDRC RTL version 2.0
Aug 26 21:18:00 arm kernel: [ 2.196979] musb-hdrc: setup fifo_mode 4
Aug 26 21:18:00 arm kernel: [ 2.197001] musb-hdrc: 28/31 max ep, 16384/16384 memory
Aug 26 21:18:00 arm kernel: [ 2.197138] musb-hdrc musb-hdrc.1.auto: *** mode=1
Aug 26 21:18:00 arm kernel: [ 2.202193] musb-hdrc musb-hdrc.1.auto: *** power=250
Aug 26 21:18:00 arm kernel: [ 2.207512] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 2.213776] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
Aug 26 21:18:00 arm kernel: [ 2.225674] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
Aug 26 21:18:00 arm kernel: [ 2.233967] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
Aug 26 21:18:00 arm kernel: [ 2.234083] usb usb1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 2.234141] usb usb1: udev 1, busnum 1, minor = 0
Aug 26 21:18:00 arm kernel: [ 2.234163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Aug 26 21:18:00 arm kernel: [ 2.241331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 26 21:18:00 arm kernel: [ 2.248921] usb usb1: Product: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 2.254147] usb usb1: Manufacturer: Linux 3.8.13-bone26 musb-hcd
Aug 26 21:18:00 arm kernel: [ 2.260459] usb usb1: SerialNumber: musb-hdrc.1.auto
Aug 26 21:18:00 arm kernel: [ 2.266047] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
Aug 26 21:18:00 arm kernel: [ 2.275681] bone-capemgr bone_capemgr.8: slot #6: Failed verification
Aug 26 21:18:00 arm kernel: [ 2.282460] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
Aug 26 21:18:00 arm kernel: [ 2.293016] usb usb1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 2.293048] usb usb1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 2.293125] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 2.293310] hub 1-0:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 2.293332] hub 1-0:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 2.293360] hub 1-0:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 2.297439] hub 1-0:1.0: 1 port detected
Aug 26 21:18:00 arm kernel: [ 2.301620] hub 1-0:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 2.301639] hub 1-0:1.0: individual port power switching
Aug 26 21:18:00 arm kernel: [ 2.301656] hub 1-0:1.0: no over-current protection
Aug 26 21:18:00 arm kernel: [ 2.301672] hub 1-0:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 2.301691] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
Aug 26 21:18:00 arm kernel: [ 2.301709] hub 1-0:1.0: power on to power good time: 10ms
Aug 26 21:18:00 arm kernel: [ 2.301752] hub 1-0:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 2.301855] hub 1-0:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 2.302977] mousedev: PS/2 mouse device common for all mice
Aug 26 21:18:00 arm kernel: [ 2.311581] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
Aug 26 21:18:00 arm kernel: [ 2.319455] i2c /dev entries driver
Aug 26 21:18:00 arm kernel: [ 2.324808] pps_ldisc: PPS line discipline registered
Aug 26 21:18:00 arm kernel: [ 2.330317] Driver for 1-wire Dallas network protocol.
Aug 26 21:18:00 arm kernel: [ 2.337612] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
Aug 26 21:18:00 arm kernel: [ 2.345638] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
Aug 26 21:18:00 arm kernel: [ 2.354633] cpuidle: using governor ladder
Aug 26 21:18:00 arm kernel: [ 2.358994] cpuidle: using governor menu
Aug 26 21:18:00 arm kernel: [ 2.363553] of_get_named_gpio_flags exited with status 6
Aug 26 21:18:00 arm kernel: [ 2.363572] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.363587] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.363623] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
Aug 26 21:18:00 arm kernel: [ 2.370867] omap_hsmmc mmc.4: Failed to get rstctl; not using any
Aug 26 21:18:00 arm kernel: [ 2.377778] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
Aug 26 21:18:00 arm kernel: [ 2.384993] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
Aug 26 21:18:00 arm kernel: [ 2.392380] mmc.4 supply vmmc_aux not found, using dummy regulator
Aug 26 21:18:00 arm kernel: [ 2.399422] omap_hsmmc mmc.4: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.406360] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
Aug 26 21:18:00 arm kernel: [ 2.406445] hub 1-0:1.0: hub_suspend
Aug 26 21:18:00 arm kernel: [ 2.406489] usb usb1: bus auto-suspend, wakeup 1
Aug 26 21:18:00 arm kernel: [ 2.432727] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432750] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432765] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.432816] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.439026] omap_hsmmc mmc.10: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.446986] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
Aug 26 21:18:00 arm kernel: [ 2.453441] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
Aug 26 21:18:00 arm kernel: [ 2.460571] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
Aug 26 21:18:00 arm kernel: [ 2.468122] mmc.10 supply vmmc_aux not found, using dummy regulator
Aug 26 21:18:00 arm kernel: [ 2.474850] omap_hsmmc mmc.10: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.509173] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
Aug 26 21:18:00 arm kernel: [ 2.520954] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
Aug 26 21:18:00 arm kernel: [ 2.528284] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
Aug 26 21:18:00 arm kernel: [ 2.537338] usb usb1: usb wakeup-resume
Aug 26 21:18:00 arm kernel: [ 2.537386] usb usb1: usb auto-resume
Aug 26 21:18:00 arm kernel: [ 2.537417] hub 1-0:1.0: hub_resume
Aug 26 21:18:00 arm kernel: [ 2.537467] hub 1-0:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 2.537719] leds-gpio gpio-leds.7: pins are not configured from the driver
Aug 26 21:18:00 arm kernel: [ 2.545026] of_get_named_gpio_flags exited with status 53
Aug 26 21:18:00 arm kernel: [ 2.545050] of_get_named_gpio_flags exited with status 54
Aug 26 21:18:00 arm kernel: [ 2.545069] of_get_named_gpio_flags exited with status 55
Aug 26 21:18:00 arm kernel: [ 2.545088] of_get_named_gpio_flags exited with status 56
Aug 26 21:18:00 arm kernel: [ 2.545243] of_get_named_gpio_flags exited with status 53
Aug 26 21:18:00 arm kernel: [ 2.545491] of_get_named_gpio_flags exited with status 54
Aug 26 21:18:00 arm kernel: [ 2.545757] of_get_named_gpio_flags exited with status 55
Aug 26 21:18:00 arm kernel: [ 2.545945] of_get_named_gpio_flags exited with status 56
Aug 26 21:18:00 arm kernel: [ 2.546569] ledtrig-cpu: registered to indicate activity on CPUs
Aug 26 21:18:00 arm kernel: [ 2.553457] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
Aug 26 21:18:00 arm kernel: [ 2.560753] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Aug 26 21:18:00 arm kernel: [ 2.569413] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
Aug 26 21:18:00 arm kernel: [ 2.575765] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
Aug 26 21:18:00 arm kernel: [ 2.583019] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
Aug 26 21:18:00 arm kernel: [ 2.591528] usbcore: registered new interface driver usbhid
Aug 26 21:18:00 arm kernel: [ 2.597446] usbhid: USB HID core driver
Aug 26 21:18:00 arm kernel: [ 2.603052] ashmem: initialized
Aug 26 21:18:00 arm kernel: [ 2.606924] logger: created 256K log 'log_main'
Aug 26 21:18:00 arm kernel: [ 2.612223] logger: created 256K log 'log_events'
Aug 26 21:18:00 arm kernel: [ 2.617645] logger: created 256K log 'log_radio'
Aug 26 21:18:00 arm kernel: [ 2.622852] logger: created 256K log 'log_system'
Aug 26 21:18:00 arm kernel: [ 2.631042] of_get_named_gpio_flags exited with status 59
Aug 26 21:18:00 arm kernel: [ 2.632703] davinci_evm sound.13: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
Aug 26 21:18:00 arm kernel: [ 2.640473] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
Aug 26 21:18:00 arm kernel: [ 2.640543] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 2.643480] mmc1: BKOPS_EN bit is not set
Aug 26 21:18:00 arm kernel: [ 2.648827] TCP: cubic registered
Aug 26 21:18:00 arm kernel: [ 2.652517] NET: Registered protocol family 10
Aug 26 21:18:00 arm kernel: [ 2.658825] NET: Registered protocol family 17
Aug 26 21:18:00 arm kernel: [ 2.664136] mmc1: new high speed MMC card at address 0001
Aug 26 21:18:00 arm kernel: [ 2.670047] Key type dns_resolver registered
Aug 26 21:18:00 arm kernel: [ 2.678881] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
Aug 26 21:18:00 arm kernel: [ 2.674892] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Aug 26 21:18:00 arm kernel: [ 2.688773] ThumbEE CPU extension supported.
Aug 26 21:18:00 arm kernel: [ 2.693800] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
Aug 26 21:18:00 arm kernel: [ 2.700431] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
Aug 26 21:18:00 arm kernel: [ 2.706705] Registering SWP/SWPB emulation handler
Aug 26 21:18:00 arm kernel: [ 2.713914] registered taskstats version 1
Aug 26 21:18:00 arm kernel: [ 2.718522] mmcblk0: p1 p2
Aug 26 21:18:00 arm kernel: [ 2.726431] mmcblk0boot1: unknown partition table
Aug 26 21:18:00 arm kernel: [ 2.731785] of_get_named_gpio_flags: can't parse gpios property
Aug 26 21:18:00 arm kernel: [ 2.731815] tilcdc 4830e000.fb: No power control GPIO
Aug 26 21:18:00 arm kernel: [ 2.739715] mmcblk0boot0: unknown partition table
Aug 26 21:18:00 arm kernel: [ 2.745043] usb 1-1: new high-speed USB device number 2 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 2.871141] tilcdc 4830e000.fb: found TDA19988
Aug 26 21:18:00 arm kernel: [ 2.876618] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Aug 26 21:18:00 arm kernel: [ 2.883613] [drm] No driver support for vblank timestamp query.
Aug 26 21:18:00 arm kernel: [ 2.890359] tilcdc 4830e000.fb: No connectors reported connected with modes
Aug 26 21:18:00 arm kernel: [ 2.897774] [drm] Cannot find any crtc or sizes - going 1024x768
Aug 26 21:18:00 arm kernel: [ 2.907464] usb 1-1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 2.907989] usb 1-1: udev 2, busnum 1, minor = 1
Aug 26 21:18:00 arm kernel: [ 2.908017] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Aug 26 21:18:00 arm kernel: [ 2.915089] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 26 21:18:00 arm kernel: [ 2.922584] usb 1-1: Product: USB2.0 Hub
Aug 26 21:18:00 arm kernel: [ 2.937185] Console: switching to colour frame buffer device 128x48
Aug 26 21:18:00 arm kernel: [ 2.952926] tilcdc 4830e000.fb: fb0: frame buffer device
Aug 26 21:18:00 arm kernel: [ 2.958605] tilcdc 4830e000.fb: registered panic notifier
Aug 26 21:18:00 arm kernel: [ 2.964876] usb 1-1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 2.964908] usb 1-1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 2.965039] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
Aug 26 21:18:00 arm kernel: [ 2.971330] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 2.971587] hub 1-1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 2.971610] hub 1-1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 2.971643] hub 1-1:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 2.991061] hub 1-1:1.0: 4 ports detected
Aug 26 21:18:00 arm kernel: [ 2.995346] hub 1-1:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 2.995368] hub 1-1:1.0: ganged power switching
Aug 26 21:18:00 arm kernel: [ 2.995384] hub 1-1:1.0: global over-current protection
Aug 26 21:18:00 arm kernel: [ 2.995400] hub 1-1:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 2.995420] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Aug 26 21:18:00 arm kernel: [ 2.995436] hub 1-1:1.0: Port indicators are supported
Aug 26 21:18:00 arm kernel: [ 2.995453] hub 1-1:1.0: power on to power good time: 100ms
Aug 26 21:18:00 arm kernel: [ 2.995897] hub 1-1:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 2.995922] hub 1-1:1.0: no over-current condition exists
Aug 26 21:18:00 arm kernel: [ 2.996245] hub 1-1:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 2.997804] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Aug 26 21:18:00 arm kernel: [ 2.997859] hub 1-0:1.0: port 1 enable change, status 00000503
Aug 26 21:18:00 arm kernel: [ 3.030130] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
Aug 26 21:18:00 arm kernel: [ 3.036550] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
Aug 26 21:18:00 arm kernel: [ 3.053641] libphy: 4a101000.mdio: probed
Aug 26 21:18:00 arm kernel: [ 3.057923] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Aug 26 21:18:00 arm kernel: [ 3.067838] Detected MACID = 90:59:af:55:5c:07
Aug 26 21:18:00 arm kernel: [ 3.072544] cpsw 4a100000.ethernet: NAPI disabled
Aug 26 21:18:00 arm kernel: [ 3.079715] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
Aug 26 21:18:00 arm kernel: [ 3.096115] ALSA device list:
Aug 26 21:18:00 arm kernel: [ 3.099333] #0: TI BeagleBone Black
Aug 26 21:18:00 arm kernel: [ 3.104066] Freeing init memory: 292K
Aug 26 21:18:00 arm kernel: [ 3.108020] hub 1-1:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.108546] hub 1-1:1.0: port 2: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.109086] hub 1-1:1.0: port 3: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.209957] hub 1-1:1.0: state 7 ports 4 chg 000e evt 0000
Aug 26 21:18:00 arm kernel: [ 3.210279] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.276557] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.373985] usb 1-1.1: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 3.375450] usb 1-1.1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.379971] usb 1-1.1: udev 3, busnum 1, minor = 2
Aug 26 21:18:00 arm kernel: [ 3.379996] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 3.387257] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 3.394924] usb 1-1.1: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 3.399679] usb 1-1.1: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 3.403886] usb 1-1.1: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 3.413442] usb 1-1.1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.413471] usb 1-1.1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.414992] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.418085] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.483602] usb 1-1.2: new full-speed USB device number 4 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.577100] usb 1-1.2: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 3.578588] usb 1-1.2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.583198] usb 1-1.2: udev 4, busnum 1, minor = 3
Aug 26 21:18:00 arm kernel: [ 3.583221] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 3.590484] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 3.598149] usb 1-1.2: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 3.602904] usb 1-1.2: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 3.607110] usb 1-1.2: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 3.618527] usb 1-1.2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.618556] usb 1-1.2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.619095] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.622442] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 3.688652] usb 1-1.3: new high-speed USB device number 5 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 3.783270] usb 1-1.3: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 3.783605] usb 1-1.3: udev 5, busnum 1, minor = 4
Aug 26 21:18:00 arm kernel: [ 3.783622] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
Aug 26 21:18:00 arm kernel: [ 3.790905] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 26 21:18:00 arm kernel: [ 3.798572] usb 1-1.3: Product: USB2.0 Hub
Aug 26 21:18:00 arm kernel: [ 3.808952] usb 1-1.3: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 3.808979] usb 1-1.3: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 3.811004] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 3.811667] hub 1-1.3:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 3.811684] hub 1-1.3:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 3.811709] hub 1-1.3:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 3.821993] hub 1-1.3:1.0: 4 ports detected
Aug 26 21:18:00 arm kernel: [ 3.832328] hub 1-1.3:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 3.832352] hub 1-1.3:1.0: ganged power switching
Aug 26 21:18:00 arm kernel: [ 3.832362] hub 1-1.3:1.0: global over-current protection
Aug 26 21:18:00 arm kernel: [ 3.832388] hub 1-1.3:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 3.832401] hub 1-1.3:1.0: TT requires at most 32 FS bit times (2664 ns)
Aug 26 21:18:00 arm kernel: [ 3.832411] hub 1-1.3:1.0: Port indicators are supported
Aug 26 21:18:00 arm kernel: [ 3.832420] hub 1-1.3:1.0: power on to power good time: 100ms
Aug 26 21:18:00 arm kernel: [ 3.833398] hub 1-1.3:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 3.833417] hub 1-1.3:1.0: no over-current condition exists
Aug 26 21:18:00 arm kernel: [ 3.833646] hub 1-1.3:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 3.835498] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
Aug 26 21:18:00 arm kernel: [ 3.936767] hub 1-1.3:1.0: port 1: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 3.937320] hub 1-1.3:1.0: port 2: status 0101 change 0001
Aug 26 21:18:00 arm kernel: [ 4.038143] hub 1-1.3:1.0: state 7 ports 4 chg 0006 evt 0000
Aug 26 21:18:00 arm kernel: [ 4.038455] hub 1-1.3:1.0: port 1, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 4.104733] usb 1-1.3.1: new full-speed USB device number 6 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 4.198192] usb 1-1.3.1: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 4.199727] usb 1-1.3.1: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 4.204350] usb 1-1.3.1: udev 6, busnum 1, minor = 5
Aug 26 21:18:00 arm kernel: [ 4.204377] usb 1-1.3.1: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 4.211829] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 4.219678] usb 1-1.3.1: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 4.224614] usb 1-1.3.1: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 4.229005] usb 1-1.3.1: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 4.239658] usb 1-1.3.1: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 4.239687] usb 1-1.3.1: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 4.241187] usb 1-1.3.1: adding 1-1.3.1:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 4.244392] hub 1-1.3:1.0: port 2, status 0101, change 0000, 12 Mb/s
Aug 26 21:18:00 arm kernel: [ 4.311802] usb 1-1.3.2: new full-speed USB device number 7 using musb-hdrc
Aug 26 21:18:00 arm kernel: [ 4.405403] usb 1-1.3.2: ep0 maxpacket = 8
Aug 26 21:18:00 arm kernel: [ 4.406819] usb 1-1.3.2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 4.411352] usb 1-1.3.2: udev 7, busnum 1, minor = 6
Aug 26 21:18:00 arm kernel: [ 4.411376] usb 1-1.3.2: New USB device found, idVendor=0403, idProduct=6001
Aug 26 21:18:00 arm kernel: [ 4.418826] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 26 21:18:00 arm kernel: [ 4.426675] usb 1-1.3.2: Product: FT232R USB UART
Aug 26 21:18:00 arm kernel: [ 4.431611] usb 1-1.3.2: Manufacturer: FTDI
Aug 26 21:18:00 arm kernel: [ 4.436000] usb 1-1.3.2: SerialNumber:
Aug 26 21:18:00 arm kernel: [ 4.446607] usb 1-1.3.2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 4.446635] usb 1-1.3.2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 4.448157] usb 1-1.3.2: adding 1-1.3.2:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 4.450930] hub 1-1.3:1.0: state 7 ports 4 chg 0000 evt 0004
Aug 26 21:18:00 arm kernel: [ 4.747145] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Aug 26 21:18:00 arm kernel: [ 4.754851] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Aug 26 21:18:00 arm kernel: [ 5.554321] EXT4-fs (mmcblk0p2): recovery complete
Aug 26 21:18:00 arm kernel: [ 5.565391] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Aug 26 21:18:00 arm kernel: [ 8.012024] usbcore: registered new interface driver usbserial
Aug 26 21:18:00 arm kernel: [ 8.079282] usbcore: registered new interface driver usbserial_generic
Aug 26 21:18:00 arm kernel: [ 8.145677] usbserial: USB Serial support registered for generic
Aug 26 21:18:00 arm kernel: [ 8.202002] usbcore: registered new interface driver ftdi_sio
Aug 26 21:18:00 arm kernel: [ 8.209988] usbserial: USB Serial support registered for FTDI USB Serial Device
Aug 26 21:18:00 arm kernel: [ 8.286130] ftdi_sio 1-1.1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.286168] ftdi_sio 1-1.1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.286207] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.327609] usb 1-1.1: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.331735] usb 1-1.1: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.336231] usb 1-1.1: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.341260] usb 1-1.1: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.346286] usb 1-1.1: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.370340] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
Aug 26 21:18:00 arm kernel: [ 8.475679] ftdi_sio 1-1.2:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.475710] ftdi_sio 1-1.2:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.475744] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.635971] usb 1-1.2: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.640123] usb 1-1.2: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.644622] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.649650] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.654677] usb 1-1.2: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.704391] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
Aug 26 21:18:00 arm kernel: [ 8.744415] ftdi_sio 1-1.3.1:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.744445] ftdi_sio 1-1.3.1:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.744480] ftdi_sio 1-1.3.1:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.781734] usb 1-1.3.1: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.786061] usb 1-1.3.1: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.790736] usb 1-1.3.1: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.795944] usb 1-1.3.1: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.801152] usb 1-1.3.1: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.827390] usb 1-1.3.1: FTDI USB Serial Device converter now attached to ttyUSB2
Aug 26 21:18:00 arm kernel: [ 8.864284] ftdi_sio 1-1.3.2:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 8.864313] ftdi_sio 1-1.3.2:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 8.864347] ftdi_sio 1-1.3.2:1.0: FTDI USB Serial Device converter detected
Aug 26 21:18:00 arm kernel: [ 8.900424] usb 1-1.3.2: Detected FT232RL
Aug 26 21:18:00 arm kernel: [ 8.904757] usb 1-1.3.2: Number of endpoints 2
Aug 26 21:18:00 arm kernel: [ 8.909436] usb 1-1.3.2: Endpoint 1 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.914646] usb 1-1.3.2: Endpoint 2 MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.919855] usb 1-1.3.2: Setting MaxPacketSize 64
Aug 26 21:18:00 arm kernel: [ 8.943820] usb 1-1.3.2: FTDI USB Serial Device converter now attached to ttyUSB3
Aug 26 21:18:00 arm kernel: [ 9.881808] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Aug 26 21:18:00 arm kernel: [ 10.195918] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Aug 26 21:18:00 arm kernel: [ 15.374187] net eth0: initializing cpsw version 1.12 (0)
Aug 26 21:18:00 arm kernel: [ 15.381968] net eth0: phy found : id is : 0x7c0f1
Aug 26 21:18:00 arm kernel: [ 15.386917] libphy: PHY 4a101000.mdio:01 not found
Aug 26 21:18:00 arm kernel: [ 15.391948] net eth0: phy 4a101000.mdio:01 not found on slave 1
Aug 26 21:18:00 arm kernel: [ 15.404239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 26 21:18:00 arm kernel: [ 17.780358] gadget: using random self ethernet address
Aug 26 21:18:00 arm kernel: [ 17.832372] usb0: MAC 5e:92:47:a1:51:a9
Aug 26 21:18:00 arm kernel: [ 17.836524] usb0: HOST MAC 90:59:af:55:5c:09
Aug 26 21:18:00 arm kernel: [ 17.895493] gadget: Mass Storage Function, version: 2009/09/11
Aug 26 21:18:00 arm kernel: [ 17.901769] gadget: Number of LUNs=1
Aug 26 21:18:00 arm kernel: [ 17.963788] lun0: LUN: removable file: /dev/mmcblk0p1
Aug 26 21:18:00 arm kernel: [ 17.989460] gadget: Multifunction Composite Gadget
Aug 26 21:18:00 arm kernel: [ 18.011551] gadget: g_multi ready
Aug 26 21:18:00 arm kernel: [ 18.028312] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 18.058561] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
Aug 26 21:18:00 arm kernel: [ 18.086919] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
Aug 26 21:18:00 arm kernel: [ 18.087023] usb usb2: default language 0x0409
Aug 26 21:18:00 arm kernel: [ 18.087060] usb usb2: udev 1, busnum 2, minor = 128
Aug 26 21:18:00 arm kernel: [ 18.087074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Aug 26 21:18:00 arm kernel: [ 18.094266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 26 21:18:00 arm kernel: [ 18.101844] usb usb2: Product: MUSB HDRC host driver
Aug 26 21:18:00 arm kernel: [ 18.107053] usb usb2: Manufacturer: Linux 3.8.13-bone26 musb-hcd
Aug 26 21:18:00 arm kernel: [ 18.113349] usb usb2: SerialNumber: musb-hdrc.0.auto
Aug 26 21:18:00 arm kernel: [ 18.141547] usb usb2: usb_probe_device
Aug 26 21:18:00 arm kernel: [ 18.141574] usb usb2: configuration #1 chosen from 1 choice
Aug 26 21:18:00 arm kernel: [ 18.141645] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Aug 26 21:18:00 arm kernel: [ 18.141848] hub 2-0:1.0: usb_probe_interface
Aug 26 21:18:00 arm kernel: [ 18.141863] hub 2-0:1.0: usb_probe_interface - got id
Aug 26 21:18:00 arm kernel: [ 18.141886] hub 2-0:1.0: USB hub found
Aug 26 21:18:00 arm kernel: [ 18.167998] hub 2-0:1.0: 1 port detected
Aug 26 21:18:00 arm kernel: [ 18.182599] hub 2-0:1.0: standalone hub
Aug 26 21:18:00 arm kernel: [ 18.182624] hub 2-0:1.0: individual port power switching
Aug 26 21:18:00 arm kernel: [ 18.182634] hub 2-0:1.0: no over-current protection
Aug 26 21:18:00 arm kernel: [ 18.182644] hub 2-0:1.0: Single TT
Aug 26 21:18:00 arm kernel: [ 18.182656] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
Aug 26 21:18:00 arm kernel: [ 18.182666] hub 2-0:1.0: power on to power good time: 10ms
Aug 26 21:18:00 arm kernel: [ 18.182715] hub 2-0:1.0: local power source is good
Aug 26 21:18:00 arm kernel: [ 18.182817] hub 2-0:1.0: enabling power on all ports
Aug 26 21:18:00 arm kernel: [ 18.284098] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
Aug 26 21:18:00 arm kernel: [ 18.284163] hub 2-0:1.0: hub_suspend
Aug 26 21:18:00 arm kernel: [ 18.284191] usb usb2: bus auto-suspend, wakeup 1
Aug 26 21:18:00 arm kernel: [ 18.458373] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Aug 26 21:18:01 arm kernel: [ 18.464766] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 26 21:18:01 arm /usr/sbin/cron[2030]: (CRON) INFO (pidfile fd = 3)
Aug 26 21:18:01 arm /usr/sbin/cron[2035]: (CRON) STARTUP (fork ok)
Aug 26 21:18:02 arm /usr/sbin/cron[2035]: (CRON) INFO (Running @reboot jobs)
Aug 26 21:18:02 arm udhcpd[2152]: udhcpd (v1.20.2) started
Aug 26 21:18:02 arm udhcpd[2152]: is interface usb0 up and configured?: Cannot assign requested address
Aug 26 21:18:03 arm kernel: [ 20.470418] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
Aug 26 21:18:03 arm udhcpd[2158]: udhcpd (v1.20.2) started
Aug 26 21:18:14 arm ntpdate[1581]: no server suitable for synchronization found
Aug 26 21:18:14 arm ntpdate[2169]: no server suitable for synchronization found
Aug 26 21:18:17 arm ntpd[2176]: ntpd 4.2.6p5@1.2349-o Sat May 12 10:13:58 UTC 2012 (1)
Aug 26 21:18:17 arm ntpd[2177]: proto: precision = 2.958 usec
Aug 26 21:18:17 arm ntpd[2177]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen and drop on 1 v6wildcard :: UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 2 lo 127.0.0.1 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 3 eth0 192.168.1.37 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 4 usb0 192.168.7.2 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 5 lo ::1 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: Listen normally on 6 eth0 fe80::9259:afff:fe55:5c07 UDP 123
Aug 26 21:18:17 arm ntpd[2177]: peers refreshed
Aug 26 21:18:17 arm ntpd[2177]: Listening on routing socket on fd #23 for interface updates
Aug 26 21:19:01 arm /USR/SBIN/CRON[2223]: (root) CMD ( /usr/local/oscam-watchdog.sh #Teste ob OScam laeuft (jede 5 Minuten))
Aug 26 21:19:01 arm /USR/SBIN/CRON[2222]: (CRON) info (No MTA installed, discarding output)
Gruss
Zuletzt bearbeitet:
hismastersvoice
Spezialist
- Registriert
- 22. August 2012
- Beiträge
- 507
- Reaktionspunkte
- 232
- Punkte
- 43
