Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

axel · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Alles wird gut! :ja

Nur die beiden Reader in oscam.server stehen lassen, G09 + Osemu, Rest wech damit.

Gruss

Gesendet über 38 Ecken ☝

Biker1602 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Osemu Reader?

webman2 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

oscam.conf

[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 1500
preferlocalcards = 1

[cache]

[newcamd]
port = 22000@09C7:000000
key = 0102030405060708091011121314

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httphelplang = en
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam

oscam.user

[account]
user = cccam
pwd = cccam
group = 1
au = 1

[account]
user = Balkon
pwd = 160257
group = 1

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi,
Als nächstes würde ich in der oscam.conf mal "httpsavefullcfg = 0" setzen.
Oder mach das Häkchen im WebIf unter "Config -> Webif" bei "Http save full config:" raus.

Dann werden deine Configfiles nach dem nächsten Speichern viel übersichtlicher, da dann Standartwerte nicht mehr angezeigt werden.

Gruß
janni1

Biker1602 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Habe ich gemacht nach Neustart kan diese Logdatei

2016/03/09 16:02:43 00000000 s (main) System name = Linux
2016/03/09 16:02:43 00000000 s (main) Host name = raspberrypi
2016/03/09 16:02:43 00000000 s (main) Release = 4.1.18-v7+
2016/03/09 16:02:43 00000000 s (main) Version = #846 SMP Thu Feb 25 14:22:53 GMT 2016
2016/03/09 16:02:43 00000000 s (main) Machine = armv7l
2016/03/09 16:02:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 16369
2016/03/09 16:02:43 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2016/03/09 16:02:43 00000000 s (main) signal handling initialized
2016/03/09 16:02:43 00000000 s (net) newcamd: initialized (fd=5, port=22000, ip=192.168.178.33)
2016/03/09 16:02:43 00000000 s (net) -> CAID: 1830 PROVID: 003411
2016/03/09 16:02:43 00000000 s (reader) G02_#oder_G09 [mouse] creating thread for device /dev/ttyUSB0
2016/03/09 16:02:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/03/09 16:02:43 00000000 s (main) waiting for local card init
2016/03/09 16:02:44 61914D61 h (webif) webif: decompressed 165020 bytes back into 393408 bytes
2016/03/09 16:02:44 61914D61 h (webif) HTTP Server running. ip=192.168.178.33 port=16002
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Buffers readed 0 bytes total time_us 75173
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 1 value 03 time_us 3739
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 2 value 40 time_us 1371
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 3 value 77 time_us 18516
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 4 value 5b time_us 2790
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 5 value bf time_us 1297
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 6 value f5 time_us 1296
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 7 value ff time_us 1396
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 8 value 3f time_us 1299
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 9 value 33 time_us 1398
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 10 value f2 time_us 2798
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 11 value 57 time_us 1301
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 12 value 69 time_us 1397
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 13 value 00 time_us 1301
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 14 value ad time_us 1298
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 15 value f5 time_us 1399
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 16 value f0 time_us 2797
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 17 value fe time_us 1303
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 18 value 3f time_us 1398
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 19 value 2d time_us 1341
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 20 value cd time_us 1279
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Flush readed byte Nr 21 value 3f time_us 1298
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Buffers readed 21 bytes total time_us 128891
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2016/03/09 16:02:44 7F70EB50 r (reader) G02_#oder_G09 [mouse] card detected
2016/03/09 16:02:45 7F70EB50 r (reader) G02_#oder_G09 [mouse] Buffers readed 0 bytes total time_us 75153
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] Setting baudrate to 9600 bps
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] Buffers readed 0 bytes total time_us 75125
2016/03/09 16:02:46 7F70EB50 r (reader) G02_#oder_G09 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] Card type: KLPV
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] Rom version: 10LM
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] Credit available on card: 0 euro
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] FuseByte: 25
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] Region Code: DEU00001
2016/03/09 16:02:47 7F70EB50 r (reader) G02_#oder_G09 [mouse] Country Code: DEU
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] Pincode read: 2904
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] PCB settings: FF FF FF FF
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] ready for requests
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [mouse] found card system videoguard2
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] card detected
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] ------------------------------------------------------------------
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] +---------+----------+---------------------+---------------------+
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 00 ---|-- 00fa --| 2016/05/05-01:00:00 |
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 00 ---|-- 00f3 --| 2016/05/05-01:00:00 |
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 00 ---|-- 00f4 --| 2016/05/05-01:00:00 |
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 00 ---|-- 00fe --| 2016/05/05-01:00:00 |
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 01 ---|-- 012d --| 2016/05/05-01:00:02 |
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] |-- 01 ---|-- 0133 --| 2016/05/05-01:00:02 |
2016/03/09 16:02:49 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] ------------------------------------------------------from-ins70--
2016/03/09 16:02:50 00000000 s (main) init for all local cards done
2016/03/09 16:02:50 00000000 s (emmcache) loaded 0 emmcache records from /var/etc/oscam.emmcache in 0 ms
2016/03/09 16:02:50 00000000 s (emmcache) loaded 0 emmstat records from /var/etc/oscam.emmstat in 0 ms
2016/03/09 16:02:50 00000000 s (anticasc) anti cascading disabled

webman2 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Erfolg!

2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/03/09 16:02:48 7F70EB50 r (reader) G02_#oder_G09 [videoguard2] card detected

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi,
aber immer noch die unnützen Newcamd-Einträge für eine HD01 in der oscam.conf.

2016/03/09 16:02:43 00000000 s (net) newcamd: initialized (fd=5, port=22000, ip=192.168.178.33)

2016/03/09 16:02:43 00000000 s (net) -> CAID: 1830 PROVID: 003411

Zeig uns die aktuelle oscam.conf am besten noch mal.

Gruß
janni1

Biker1602 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Endlich wieder kurz Zeit

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 0
loghistorylines = 256
serverip = 192.168.178.33
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 0
sysloghost =
syslogport = 514
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
getblockemmauprovid = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
csp_block_fakecws = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = en
httplocale =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 60
httphideidleclients = 1
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi,
bitte speicher deine Einstellungen überall einmal übers Webif und starte oscam mal neu, damit deine Configs übersichtlicher werden.

Gruß
janni1

Biker1602 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Habe alles gespeichert und einen Restart der Oscam gemacht.

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 0
loghistorylines = 256
serverip = 192.168.178.33
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 0
sysloghost =
syslogport = 514
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
getblockemmauprovid = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
csp_block_fakecws = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = en
httplocale =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 60
httphideidleclients = 1
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

Ich hoffe das ist richtig so. Das ist jetzt die Oascam.conf

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi,
versuch mal bitte im WebIf von Oscam folgendes:
Config -> Webif -> Häkchen setzen bei "Http save full config:" -> save
danach das Häkchen wieder entfernen -> save

Du musst angemeldet sein, um Bilder zu sehen.

Nun müssten die Conf aber wirklich viel kürzer sein.

Die [newcamd]-Sektion kannst du auch schon mal komplett löschen

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

Gruß
janni1

Biker1602 · 9. März 2016

Habe ich gemacht und Oscam neu gestartet

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 0
loghistorylines = 256
serverip = 192.168.178.33
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 0
sysloghost =
syslogport = 514
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
getblockemmauprovid = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
csp_block_fakecws = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = en
httplocale =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 60
httphideidleclients = 1
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

Fehler gemacht weil ich nur den Haken rausgenommen und nicht rein und dann wieder raus

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 192.168.178.33
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
emmlogdir = /var/log/ipc/

[cache]

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

Jetzt viel besser oder?

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi,
ja, viel besser . Ich wollte gerade schon aufgeben

so nun weiter.

Du wirst ja sicher wieder über das CCcam-Protokoll sharen wollen.
Dafür mußt du einen [cccam]- Abschnitt in deine oscam.conf einfügen.
so z.B.

[cccam]
port = >dein Sharingport<
nodeid =
version = 2.3.0

oder setz diese Sachen am besten über das WebIf unter "config ->cccam".
Dort einfach nur deinen Port eintragen und speichern.

Weiter geht es dann mit dem Anlegen der User.
Dieses machst du auch am besten gleich über's WebIf
Im User-Tab -> Add User den Usernamen festlegen und danach das Passwort. Noch die Gruppe1 von der Karte zuweisen und speichern.
Sollte am Ende in der oscam.user so etwa aussehen:

[account]
user = user1
pwd = pass1
group = 1

Zum Schluß Oscam mal neu starten

Jetzt kannst du zur Kontrolle noch einmal deine Configs posten (oscam.conf, -user, -server)

Gruß
janni1

Biker1602 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hoffe habe alles richtig gemacht
oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
disabled = 1
user = cccam
pwd = cccam
description =
hostname = localhost
caid = 1830
uniq = 1
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = -1
keepalive = 0
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel =
group = 1
services =
preferlocalcards = -1
ident =
chid =
class =
max_connections = 1
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1
fakedelay = -1
numusers = -1
penalty = -1
acosc_max_active_sids = -1
acosc_zap_limit = -1
acosc_penalty = -1
acosc_penalty_duration = -1
acosc_delay = -1
lb_nbest_readers = -1
lb_nfb_readers = -1
lb_nbest_percaid =
cwc_disable = 0

[account]
disabled = 0
user = Balkon
pwd = 160257
description =
hostname =
caid =
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = -1
keepalive = 0
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel =
group = 1
services =
preferlocalcards = -1
ident =
chid =
class =
max_connections = 1
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1
fakedelay = -1
numusers = -1
penalty = -1
acosc_max_active_sids = -1
acosc_zap_limit = -1
acosc_penalty = -1
acosc_penalty_duration = -1
acosc_delay = -1
lb_nbest_readers = -1
lb_nfb_readers = -1
lb_nbest_percaid =
cwc_disable = 0

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = G02 #oder G09
protocol = mouse
device = /dev/ttyUSB0
#protocol = internal - Nur für Dreambox, VU+, etc.!
#device = /dev/sci0 - Nur für Dreambox, VU+, etc.!
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = OSEmu
description =
enable = 0
protocol = cs357x
device = 127.0.0.1,54321,0
key =
user = emu
password = emu
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid = 0D00,0D02,0D03,0D05,090F
ecmnotfoundlimit = 0
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ecmheaderwhitelist =
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 192.168.178.33
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
emmlogdir = /var/log/ipc/

[cache]

[cccam]
port = xxxxx
nodeid = 0D288B4D105913AA
version = 2.3.0

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

- - - - - - - - - -

janni1 bitte gib nicht auf ich gebe mir doch Mühe

janni1 · 9. März 2016

AW: Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Hi.
Bis auf das wieder alles gespeicher/angezeigt wird, sieht es gut aus.
Hast du die User über's Web If angelegt?

Den User "cccam" kannst du löschen, wenn du ihn nicht brauchst z.b. über's WebIf im User-Tab hinten auf den Papierkorb in der entsprechenden Zeile.
Den Osemu-Reader auch, wenn du nicht vorhast den Schweizer zu verteilen.

Gruß
janni1

Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

axel

Biker1602

Ist oft hier

webman2

janni1

Biker1602

Ist oft hier

webman2

janni1

Biker1602

Ist oft hier

janni1

Biker1602

Ist oft hier

janni1

Biker1602

Ist oft hier

janni1

Biker1602

Ist oft hier

janni1

Ähnliche Themen

Raspberry und oscam Konfiguration???? Ich brauche glaube ich einen Profi!!

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ist oft hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz