Probleme mit Reader

[Backdoorman05]

Hallo zusammen,
ich möchte von meiner alten Fritzbox auf einen RaspberryB+ umsteigen.
Habe raspbian-wheezy installiert und eine oscam kompiliert.
Nun einen passiven USB Hub mit zwei Smargos und einem USB Stick dran. Das ganze hängt an einem 5V IphoneAdabter.
Dann mein conf. und Server File von der Fritzbox übernommen.

Server:

Spoiler

[reader]
label = v13
protocol = smartreader
device = Serial:Reader 14DA090
services = skyfull,sky-hdplus,sky-ppv,sky-xxx
detect = cd
smargopatch = 1
caid = 09C4
boxid = 00009134
group = 1
emmcache = 1,1,2
mhz = 357
cardmhz = 357
ins7e11 = 15
ndsversion = 2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-g = 1
[reader]
label = hdplus
protocol = smartreader
device = Serial:Reader 54B1F8B
detect = CD
services = hdplus
caid = 1843
group = 2
emmcache = 1,1,2
RSXXX = XXX
BOXXX = XXX
mhz = 600
cardmhz = 368
blockemm-unknown = 1
blockemm-s = 1

config:

Spoiler

[global]
#logfile = /var/media/ftp/uStor01/oscam.log
bindwait = 5
nice = -1
maxlogsize = 1000
waitforcards_extra_delay = 100
saveinithistory = 1
dropdups = 1
[monitor]
appendchaninfo = 1
[cccam]
port = xxxxxx
reshare = 0
version = 2.2.1
keepconnected = 1
stealth = 1

Die ECM Zeit ist leicht verbessert als auf der Fritzbox. Allerdinngs bekomme ich regelmäßig Aussetzer,
wie man hier im Log sieht:

Spoiler

2015/03/27 19:21:02 883478 c (ecm) User1 (XXXXX): found (404 ms) by hdplus - ProSieben HD
2015/03/27 19:21:09 883478 c (ecm) User1 (XXXXX): found (405 ms) by hdplus - ProSieben HD
2015/03/27 19:21:11 867688 r (reader) hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/03/27 19:21:12 867688 r (reader) hdplus [nagra] T1 Resync command error, trying to reactivate!
2015/03/27 19:21:16 867688 r (reader) hdplus [nagra] ATR:XXXXX
2015/03/27 19:21:16 867688 r (reader) hdplus [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/27 19:21:16 867688 r (reader) hdplus [nagra] Calculated work ETU is 5.99 us reader mhz = 534
2015/03/27 19:21:16 867688 r (reader) hdplus [nagra] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/03/27 19:21:17 867688 r (reader) hdplus [nagra] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/27 19:21:17 867688 r (reader) hdplus [nagra] Card responded ok for ifsd request of 160
2015/03/27 19:21:17 883478 c (ecm) User1 (XXXXX): found (1688 ms) by hdplus - ProSieben HD
2015/03/27 19:21:23 883478 c (ecm) User1 (XXXXX): found (403 ms) by hdplus - ProSieben HD

(reader) v13 [videoguard2] classD1 ins40: (-2) status not ok 00 00
2015/03/27 22:03:11 8671E0 r (reader) v13 [videoguard2] The card is not answering correctly! Restarting reader for safety
2015/03/27 22:03:12 8671E0 r (reader) v13 [videoguard2] classD1 ins40: (-2) status not ok 00 00
2015/03/27 22:03:12 8671E0 r (reader) v13 [videoguard2] The card is not answering correctly! Restarting reader for safety
2015/03/27 22:03:13 8671E0 r (reader) v13 [videoguard2] SR: smartreader closed
2015/03/27 22:03:13 8671E0 r (reader) v13 [videoguard2] creating thread for device Serial:Reader 14DA090
2015/03/27 22:03:13 885838 r (reader) v13 [videoguard2] Reader initialized (device=Serial:Reader 14DA090, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/27 22:03:13 885838 r (reader) v13 [videoguard2] card detected
2015/03/27 22:03:16 885F70 c (ecm) User2 (XXX): timeout (5001 ms) by v13 - Disney Channel HD
2015/03/27 22:03:16 885F70 c (ecm) User2 (XXX): rejected group (1 ms) - Disney Channel HD (no matching reader)
2015/03/27 22:03:16 885F70 c (ecm) User2 (XXX): rejected group (0 ms) - Disney Channel HD (no matching reader)
2015/03/27 22:03:17 885F70 c (-) -- Skipped 1 duplicated log lines --
2015/03/27 22:03:17 885838 r (reader) v13 [smartreader] ATR: XXX
2015/03/27 22:03:17 885838 r (reader) v13 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/03/27 22:03:17 885838 r (reader) v13 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/03/27 22:03:17 885838 r (reader) v13 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=3 T=0 inv=1 parity=ODD
2015/03/27 22:03:18 885838 r (reader) v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/27 22:03:19 885838 r (-) -- Skipped 4 duplicated log lines --
2015/03/27 22:03:19 885838 r (reader) v13 [smartreader] Card type: P1TV
2015/03/27 22:03:19 885838 r (reader) v13 [smartreader] Rom version: 10A7
2015/03/27 22:03:19 885838 r (reader) v13 [smartreader] Unable to get smartcard credit
2015/03/27 22:03:19 885838 r (reader) v13 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2015/03/27 22:03:19 885838 r (reader) v13 [smartreader] found card system videoguard2
2015/03/27 22:03:19 885838 r (reader) v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/27 22:03:19 885838 r (reader) v13 [videoguard2] card detected
2015/03/27 22:03:19 885838 r (reader) v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/03/27 22:03:20 885838 r (-) -- Skipped 3 duplicated log lines --
2015/03/27 22:03:20 885838 r (reader) v13 [smartreader] ATR: XXX
2015/03/27 22:03:20 885838 r (reader) v13 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/03/27 22:03:20 885838 r (reader) v13 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2015/03/27 22:03:20 885838 r (reader) v13 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=3 T=0 inv=1 parity=ODD
2015/03/27 22:03:20 885838 r (reader) v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] Card type: P1TV
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] Rom version: 10A7
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] Unable to get smartcard credit
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] FuseByte: 25
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] Region Code: 00BO0102
2015/03/27 22:03:22 885838 r (reader) v13 [smartreader] Country Code: DEU
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] +---------+----------+---------------------+---------------------+
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0058 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0056 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0057 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0068 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0069 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 006a --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 006b --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 006c --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0065 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0066 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 006e --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0067 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 006f --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 007b --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 007d --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 0081 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 008e --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00c0 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00c8 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00c9 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00ca --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00c7 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00e4 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00e5 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00fa --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00f3 --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] |-- 00 ---|-- 00ff --| XXX |
2015/03/27 22:03:22 885838 r (reader) v13 [videoguard2] ------------------------------------------------------from-ins70--

Ich wollte bei Gelegenheit probieren beide Reader direkt an den Raspberry anzuschließen, bin mir aber nicht sicher ob der Platz wergen den USB Anschlüssen reicht.

Könnt ihr mal bitte über die Einstellungen schauen ob das so passt oder an was liegt das Problem sonst?

Danke und Gruß

 

[Dr_Plaschke]

AW: Probleme mit Reader

Liefen die Smargos problemlos an der Fritzbox?
Hier wird ja immer wieder regelmäßig geschrieben, dass sie viele Probleme bereiten. Vorzugsweise sollte man auf eine Easymouse setzen.
Hilft Dir zwar jetzt nicht wirklich weiter, aber........

 

[Radagast]

AW: Probleme mit Reader

Hi,

due schreibst etwas von wegen passivem USB Hub. Der Pi ist nicht dafür ausgelegt die USB-Ports mit ausreichend Strom zu versorgen. Mach aus dem passivem USB Hub einen aktiven und berichte dann nochmal falls es sich nicht bessert.