AW: Pogoplug E02 Debian Cardserver mit IPC
Hoffe das stimmt so.
Hoffe das stimmt so.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-48) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sat Feb 16 04:43:37 UTC 2013
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Marvell SheevaPlug Reference Board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c03d5114, node_mem_map c0440000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 250880KB available (3520K code, 583K data, 124K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] Console: colour dummy device 80x30
[ 0.000134] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 0.240095] Security Framework initialized
[ 0.240115] SELinux: Disabled at boot.
[ 0.240146] Mount-cache hash table entries: 512
[ 0.240464] Initializing cgroup subsys ns
[ 0.240480] Initializing cgroup subsys cpuacct
[ 0.240491] Initializing cgroup subsys devices
[ 0.240500] Initializing cgroup subsys freezer
[ 0.240509] Initializing cgroup subsys net_cls
[ 0.240569] CPU: Testing write buffer coherency: ok
[ 0.241387] devtmpfs: initialized
[ 0.243121] regulator: core version 0.5
[ 0.243339] NET: Registered protocol family 16
[ 0.243864] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 0.243878] Feroceon L2: Enabling L2
[ 0.243913] Feroceon L2: Cache support initialised.
[ 0.244348] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000
[ 0.244370] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000
[ 0.245828] bio: create slab <bio-0> at 0
[ 0.246101] vgaarb: loaded
[ 0.246571] Switching to clocksource orion_clocksource
[ 0.250605] NET: Registered protocol family 2
[ 0.250845] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.251604] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.251788] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.251883] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.251892] TCP reno registered
[ 0.252042] NET: Registered protocol family 1
[ 0.252218] Unpacking initramfs...
[ 0.563941] Freeing initrd memory: 4428K
[ 0.564052] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.564301] audit: initializing netlink socket (disabled)
[ 0.564336] type=2000 audit(0.550:1): initialized
[ 0.570830] VFS: Disk quotas dquot_6.5.2
[ 0.571096] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.571208] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.571857] msgmni has been set to 499
[ 0.573595] alg: No test for stdrng (krng)
[ 0.573716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.573729] io scheduler noop registered
[ 0.573736] io scheduler anticipatory registered
[ 0.573743] io scheduler deadline registered
[ 0.573920] io scheduler cfq registered (default)
[ 0.579988] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.580465] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.907721] console [ttyS0] enabled
[ 0.911804] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[ 0.920325] Scanning device for bad blocks
[ 0.962183] 4 cmdlinepart partitions found on MTD device orion_nand
[ 0.968488] Creating 4 MTD partitions on "orion_nand":
[ 0.973653] 0x000000000000-0x000000100000 : "u-boot"
[ 0.979221] 0x000000100000-0x000000500000 : "uImage"
[ 0.984665] 0x000000500000-0x000002500000 : "rootfs"
[ 0.990179] 0x000002500000-0x000008000000 : "data"
[ 0.996065] mice: PS/2 mouse device common for all mice
[ 2.006616] rtc-mv rtc-mv: internal RTC not ticking
[ 2.011607] i2c /dev entries driver
[ 2.015280] cpuidle: using governor ladder
[ 2.019528] cpuidle: using governor menu
[ 2.023561] Registered led device: plug:green:health
[ 2.028627] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 2.035025] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 2.076640] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 2.116638] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 2.156638] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 2.196638] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 2.203328] TCP cubic registered
[ 2.206577] NET: Registered protocol family 17
[ 2.211076] Gating clock of unused units
[ 2.211085] before: 0x00dfc3fd
[ 2.211092] after: 0x00c701d9
[ 2.211405] registered taskstats version 1
[ 2.216193] /build/buildd-linux-2.6_2.6.32-48-armel-El1v47/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.230856] Initalizing network drop monitor service
[ 2.235900] Freeing init memory: 124K
[ 2.287067] udev[44]: starting version 164
[ 2.551762] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.557774] mv643xx_eth smi: probed
[ 2.631324] net eth0: port 0 with MAC address 00:25:31:04:96:e2
[ 2.645634] usbcore: registered new interface driver usbfs
[ 2.652180] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 2.663240] usbcore: registered new interface driver hub
[ 2.673150] usbcore: registered new device driver usb
[ 2.692880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.700547] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 2.707895] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 2.736618] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 2.756605] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.762613] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.769452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.776718] usb usb1: Product: Marvell Orion EHCI
[ 2.781443] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 2.787835] usb usb1: SerialNumber: orion-ehci.0
[ 2.793405] usb usb1: configuration #1 chosen from 1 choice
[ 2.799365] hub 1-0:1.0: USB hub found
[ 2.803158] hub 1-0:1.0: 1 port detected
[ 3.126618] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 3.278022] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.284754] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.291935] usb 1-1: Product: USB2.0 Hub
[ 3.297272] usb 1-1: configuration #1 chosen from 1 choice
[ 3.306186] hub 1-1:1.0: USB hub found
[ 3.310279] hub 1-1:1.0: 4 ports detected
[ 3.586933] usb 1-1.3: new high speed USB device using orion-ehci and address 3
[ 3.697268] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
[ 3.704176] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.711538] usb 1-1.3: Product: USB 2.0 Hub [MTT]
[ 3.717648] usb 1-1.3: configuration #1 chosen from 1 choice
[ 3.726811] hub 1-1.3:1.0: USB hub found
[ 3.730913] hub 1-1.3:1.0: 7 ports detected
[ 3.817025] usb 1-1.4: new high speed USB device using orion-ehci and address 4
[ 3.930523] usb 1-1.4: New USB device found, idVendor=0951, idProduct=1642
[ 3.937452] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.944795] usb 1-1.4: Product: DT 101 G2
[ 3.948858] usb 1-1.4: Manufacturer: Kingston
[ 3.953236] usb 1-1.4: SerialNumber: 00147854487EBAB1C7760075
[ 3.960367] usb 1-1.4: configuration #1 chosen from 1 choice
[ 4.050730] SCSI subsystem initialized
[ 4.078699] Initializing USB Mass Storage driver...
[ 4.083908] scsi0 : SCSI emulation for USB Mass Storage devices
[ 4.090624] usbcore: registered new interface driver usb-storage
[ 4.096695] USB Mass Storage support registered.
[ 4.101924] usb-storage: device found at 4
[ 4.101933] usb-storage: waiting for device to settle before scanning
[ 4.106821] usb 1-1.3.1: new high speed USB device using orion-ehci and address 5
[ 4.217273] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101
[ 4.224359] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.231890] usb 1-1.3.1: Product: USB 2.0 Hub
[ 4.237579] usb 1-1.3.1: configuration #1 chosen from 1 choice
[ 4.246968] hub 1-1.3.1:1.0: USB hub found
[ 4.251291] hub 1-1.3.1:1.0: 4 ports detected
[ 4.336784] usb 1-1.3.5: new full speed USB device using orion-ehci and address 6
[ 4.448398] usb 1-1.3.5: New USB device found, idVendor=0403, idProduct=6001
[ 4.455483] usb 1-1.3.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.463014] usb 1-1.3.5: SerialNumber: Reader 4
[ 4.468932] usb 1-1.3.5: configuration #1 chosen from 1 choice
[ 4.556797] usb 1-1.3.6: new full speed USB device using orion-ehci and address 7
[ 4.668397] usb 1-1.3.6: New USB device found, idVendor=0403, idProduct=6001
[ 4.675480] usb 1-1.3.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.683011] usb 1-1.3.6: SerialNumber: Reader 122
[ 4.689103] usb 1-1.3.6: configuration #1 chosen from 1 choice
[ 4.776811] usb 1-1.3.7: new full speed USB device using orion-ehci and address 8
[ 4.888272] usb 1-1.3.7: New USB device found, idVendor=0403, idProduct=6001
[ 4.895355] usb 1-1.3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.902885] usb 1-1.3.7: SerialNumber: Reader 243
[ 4.908984] usb 1-1.3.7: configuration #1 chosen from 1 choice
[ 9.096935] usb-storage: device scan complete
[ 9.097989] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
[ 9.136054] sd 0:0:0:0: [sda] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.145416] sd 0:0:0:0: [sda] Write Protect is off
[ 9.150259] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 9.150269] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.160536] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.166686] sda: sda1 sda2
[ 9.176918] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.183050] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.423058] udev[178]: starting version 164
[ 13.942994] usbcore: registered new interface driver usbserial
[ 13.954650] USB Serial support registered for generic
[ 13.965763] usbcore: registered new interface driver usbserial_generic
[ 13.972415] usbserial: USB Serial Driver core
[ 14.025989] USB Serial support registered for FTDI USB Serial Device
[ 14.033595] ftdi_sio 1-1.3.5:1.0: FTDI USB Serial Device converter detected
[ 14.041849] usb 1-1.3.5: Detected FT232BM
[ 14.045903] usb 1-1.3.5: Number of endpoints 2
[ 14.050394] usb 1-1.3.5: Endpoint 1 MaxPacketSize 64
[ 14.055385] usb 1-1.3.5: Endpoint 2 MaxPacketSize 64
[ 14.060405] usb 1-1.3.5: Setting MaxPacketSize 64
[ 14.081032] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 14.087842] usb 1-1.3.5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 14.095468] ftdi_sio 1-1.3.6:1.0: FTDI USB Serial Device converter detected
[ 14.108078] usb 1-1.3.6: Detected FT232BM
[ 14.112109] usb 1-1.3.6: Number of endpoints 2
[ 14.116644] usb 1-1.3.6: Endpoint 1 MaxPacketSize 64
[ 14.121631] usb 1-1.3.6: Endpoint 2 MaxPacketSize 64
[ 14.126635] usb 1-1.3.6: Setting MaxPacketSize 64
[ 14.135060] ftdi_sio ttyUSB1: Unable to read latency timer: -32
[ 14.143118] usb 1-1.3.6: FTDI USB Serial Device converter now attached to ttyUSB1
[ 14.162095] ftdi_sio 1-1.3.7:1.0: FTDI USB Serial Device converter detected
[ 14.172025] usb 1-1.3.7: Detected FT232BM
[ 14.176087] usb 1-1.3.7: Number of endpoints 2
[ 14.180604] usb 1-1.3.7: Endpoint 1 MaxPacketSize 64
[ 14.185601] usb 1-1.3.7: Endpoint 2 MaxPacketSize 64
[ 14.190623] usb 1-1.3.7: Setting MaxPacketSize 64
[ 14.196455] ftdi_sio ttyUSB2: Unable to read latency timer: -32
[ 14.208057] usb 1-1.3.7: FTDI USB Serial Device converter now attached to ttyUSB2
[ 14.226340] usbcore: registered new interface driver ftdi_sio
[ 14.232165] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 14.463940] Adding 1475576k swap on /dev/sda2. Priority:-1 extents:1 across:1475576k
[ 19.022783] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 23.638577] NET: Registered protocol family 10
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-48) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sat Feb 16 04:43:37 UTC 2013
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Marvell SheevaPlug Reference Board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c03d5114, node_mem_map c0440000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 250880KB available (3520K code, 583K data, 124K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] Console: colour dummy device 80x30
[ 0.000134] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 0.240095] Security Framework initialized
[ 0.240115] SELinux: Disabled at boot.
[ 0.240146] Mount-cache hash table entries: 512
[ 0.240464] Initializing cgroup subsys ns
[ 0.240480] Initializing cgroup subsys cpuacct
[ 0.240491] Initializing cgroup subsys devices
[ 0.240500] Initializing cgroup subsys freezer
[ 0.240509] Initializing cgroup subsys net_cls
[ 0.240569] CPU: Testing write buffer coherency: ok
[ 0.241387] devtmpfs: initialized
[ 0.243121] regulator: core version 0.5
[ 0.243339] NET: Registered protocol family 16
[ 0.243864] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 0.243878] Feroceon L2: Enabling L2
[ 0.243913] Feroceon L2: Cache support initialised.
[ 0.244348] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000
[ 0.244370] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000
[ 0.245828] bio: create slab <bio-0> at 0
[ 0.246101] vgaarb: loaded
[ 0.246571] Switching to clocksource orion_clocksource
[ 0.250605] NET: Registered protocol family 2
[ 0.250845] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.251604] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.251788] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.251883] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.251892] TCP reno registered
[ 0.252042] NET: Registered protocol family 1
[ 0.252218] Unpacking initramfs...
[ 0.563941] Freeing initrd memory: 4428K
[ 0.564052] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.564301] audit: initializing netlink socket (disabled)
[ 0.564336] type=2000 audit(0.550:1): initialized
[ 0.570830] VFS: Disk quotas dquot_6.5.2
[ 0.571096] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.571208] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.571857] msgmni has been set to 499
[ 0.573595] alg: No test for stdrng (krng)
[ 0.573716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.573729] io scheduler noop registered
[ 0.573736] io scheduler anticipatory registered
[ 0.573743] io scheduler deadline registered
[ 0.573920] io scheduler cfq registered (default)
[ 0.579988] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.580465] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.907721] console [ttyS0] enabled
[ 0.911804] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[ 0.920325] Scanning device for bad blocks
[ 0.962183] 4 cmdlinepart partitions found on MTD device orion_nand
[ 0.968488] Creating 4 MTD partitions on "orion_nand":
[ 0.973653] 0x000000000000-0x000000100000 : "u-boot"
[ 0.979221] 0x000000100000-0x000000500000 : "uImage"
[ 0.984665] 0x000000500000-0x000002500000 : "rootfs"
[ 0.990179] 0x000002500000-0x000008000000 : "data"
[ 0.996065] mice: PS/2 mouse device common for all mice
[ 2.006616] rtc-mv rtc-mv: internal RTC not ticking
[ 2.011607] i2c /dev entries driver
[ 2.015280] cpuidle: using governor ladder
[ 2.019528] cpuidle: using governor menu
[ 2.023561] Registered led device: plug:green:health
[ 2.028627] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 2.035025] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 2.076640] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 2.116638] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 2.156638] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 2.196638] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 2.203328] TCP cubic registered
[ 2.206577] NET: Registered protocol family 17
[ 2.211076] Gating clock of unused units
[ 2.211085] before: 0x00dfc3fd
[ 2.211092] after: 0x00c701d9
[ 2.211405] registered taskstats version 1
[ 2.216193] /build/buildd-linux-2.6_2.6.32-48-armel-El1v47/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.230856] Initalizing network drop monitor service
[ 2.235900] Freeing init memory: 124K
[ 2.287067] udev[44]: starting version 164
[ 2.551762] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.557774] mv643xx_eth smi: probed
[ 2.631324] net eth0: port 0 with MAC address 00:25:31:04:96:e2
[ 2.645634] usbcore: registered new interface driver usbfs
[ 2.652180] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 2.663240] usbcore: registered new interface driver hub
[ 2.673150] usbcore: registered new device driver usb
[ 2.692880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.700547] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 2.707895] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 2.736618] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 2.756605] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.762613] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.769452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.776718] usb usb1: Product: Marvell Orion EHCI
[ 2.781443] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 2.787835] usb usb1: SerialNumber: orion-ehci.0
[ 2.793405] usb usb1: configuration #1 chosen from 1 choice
[ 2.799365] hub 1-0:1.0: USB hub found
[ 2.803158] hub 1-0:1.0: 1 port detected
[ 3.126618] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 3.278022] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.284754] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.291935] usb 1-1: Product: USB2.0 Hub
[ 3.297272] usb 1-1: configuration #1 chosen from 1 choice
[ 3.306186] hub 1-1:1.0: USB hub found
[ 3.310279] hub 1-1:1.0: 4 ports detected
[ 3.586933] usb 1-1.3: new high speed USB device using orion-ehci and address 3
[ 3.697268] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0201
[ 3.704176] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.711538] usb 1-1.3: Product: USB 2.0 Hub [MTT]
[ 3.717648] usb 1-1.3: configuration #1 chosen from 1 choice
[ 3.726811] hub 1-1.3:1.0: USB hub found
[ 3.730913] hub 1-1.3:1.0: 7 ports detected
[ 3.817025] usb 1-1.4: new high speed USB device using orion-ehci and address 4
[ 3.930523] usb 1-1.4: New USB device found, idVendor=0951, idProduct=1642
[ 3.937452] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.944795] usb 1-1.4: Product: DT 101 G2
[ 3.948858] usb 1-1.4: Manufacturer: Kingston
[ 3.953236] usb 1-1.4: SerialNumber: 00147854487EBAB1C7760075
[ 3.960367] usb 1-1.4: configuration #1 chosen from 1 choice
[ 4.050730] SCSI subsystem initialized
[ 4.078699] Initializing USB Mass Storage driver...
[ 4.083908] scsi0 : SCSI emulation for USB Mass Storage devices
[ 4.090624] usbcore: registered new interface driver usb-storage
[ 4.096695] USB Mass Storage support registered.
[ 4.101924] usb-storage: device found at 4
[ 4.101933] usb-storage: waiting for device to settle before scanning
[ 4.106821] usb 1-1.3.1: new high speed USB device using orion-ehci and address 5
[ 4.217273] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101
[ 4.224359] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.231890] usb 1-1.3.1: Product: USB 2.0 Hub
[ 4.237579] usb 1-1.3.1: configuration #1 chosen from 1 choice
[ 4.246968] hub 1-1.3.1:1.0: USB hub found
[ 4.251291] hub 1-1.3.1:1.0: 4 ports detected
[ 4.336784] usb 1-1.3.5: new full speed USB device using orion-ehci and address 6
[ 4.448398] usb 1-1.3.5: New USB device found, idVendor=0403, idProduct=6001
[ 4.455483] usb 1-1.3.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.463014] usb 1-1.3.5: SerialNumber: Reader 4
[ 4.468932] usb 1-1.3.5: configuration #1 chosen from 1 choice
[ 4.556797] usb 1-1.3.6: new full speed USB device using orion-ehci and address 7
[ 4.668397] usb 1-1.3.6: New USB device found, idVendor=0403, idProduct=6001
[ 4.675480] usb 1-1.3.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.683011] usb 1-1.3.6: SerialNumber: Reader 122
[ 4.689103] usb 1-1.3.6: configuration #1 chosen from 1 choice
[ 4.776811] usb 1-1.3.7: new full speed USB device using orion-ehci and address 8
[ 4.888272] usb 1-1.3.7: New USB device found, idVendor=0403, idProduct=6001
[ 4.895355] usb 1-1.3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 4.902885] usb 1-1.3.7: SerialNumber: Reader 243
[ 4.908984] usb 1-1.3.7: configuration #1 chosen from 1 choice
[ 9.096935] usb-storage: device scan complete
[ 9.097989] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
[ 9.136054] sd 0:0:0:0: [sda] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 9.145416] sd 0:0:0:0: [sda] Write Protect is off
[ 9.150259] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 9.150269] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.160536] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.166686] sda: sda1 sda2
[ 9.176918] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.183050] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.423058] udev[178]: starting version 164
[ 13.942994] usbcore: registered new interface driver usbserial
[ 13.954650] USB Serial support registered for generic
[ 13.965763] usbcore: registered new interface driver usbserial_generic
[ 13.972415] usbserial: USB Serial Driver core
[ 14.025989] USB Serial support registered for FTDI USB Serial Device
[ 14.033595] ftdi_sio 1-1.3.5:1.0: FTDI USB Serial Device converter detected
[ 14.041849] usb 1-1.3.5: Detected FT232BM
[ 14.045903] usb 1-1.3.5: Number of endpoints 2
[ 14.050394] usb 1-1.3.5: Endpoint 1 MaxPacketSize 64
[ 14.055385] usb 1-1.3.5: Endpoint 2 MaxPacketSize 64
[ 14.060405] usb 1-1.3.5: Setting MaxPacketSize 64
[ 14.081032] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 14.087842] usb 1-1.3.5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 14.095468] ftdi_sio 1-1.3.6:1.0: FTDI USB Serial Device converter detected
[ 14.108078] usb 1-1.3.6: Detected FT232BM
[ 14.112109] usb 1-1.3.6: Number of endpoints 2
[ 14.116644] usb 1-1.3.6: Endpoint 1 MaxPacketSize 64
[ 14.121631] usb 1-1.3.6: Endpoint 2 MaxPacketSize 64
[ 14.126635] usb 1-1.3.6: Setting MaxPacketSize 64
[ 14.135060] ftdi_sio ttyUSB1: Unable to read latency timer: -32
[ 14.143118] usb 1-1.3.6: FTDI USB Serial Device converter now attached to ttyUSB1
[ 14.162095] ftdi_sio 1-1.3.7:1.0: FTDI USB Serial Device converter detected
[ 14.172025] usb 1-1.3.7: Detected FT232BM
[ 14.176087] usb 1-1.3.7: Number of endpoints 2
[ 14.180604] usb 1-1.3.7: Endpoint 1 MaxPacketSize 64
[ 14.185601] usb 1-1.3.7: Endpoint 2 MaxPacketSize 64
[ 14.190623] usb 1-1.3.7: Setting MaxPacketSize 64
[ 14.196455] ftdi_sio ttyUSB2: Unable to read latency timer: -32
[ 14.208057] usb 1-1.3.7: FTDI USB Serial Device converter now attached to ttyUSB2
[ 14.226340] usbcore: registered new interface driver ftdi_sio
[ 14.232165] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 14.463940] Adding 1475576k swap on /dev/sda2. Priority:-1 extents:1 across:1475576k
[ 19.022783] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 23.638577] NET: Registered protocol family 10
