-bash-3.2# cd /tmp
-bash-3.2# wget
Sie müssen registriert sein, um Links zu sehen.
Connecting to projects.doozan.com (50.116.34.13:80)
install_uboot_mtd0.s 100% |*******************************| 18406 --:--:-- ETA
-bash-3.2# chmod +x install_uboot_mtd0.sh
-bash-3.2# ./install_uboot_mtd0.sh
!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!
If you lose power to your device while running this script,
it could be left in an unusable state.
This script will replace the bootloader on /dev/mtd0.
This installer will only work on the following devices:
Seagate Dockstar
Seagate GoFlex Net
Seagate GoFlex Home
Pogoplug v1
Pogoplug Pink (v2)
Do not run this installer on any other device.
By typing ok, you agree to assume all liabilities and risks
associated with running this installer.
If you agree, type 'ok' and press ENTER to continue: ok
# checking for /usr/sbin/nandwrite...
# checking for /usr/sbin/nanddump...
# checking for /usr/sbin/flash_erase...
# checking for /usr/sbin/fw_printenv...
# checking for /etc/fw_env.config...
# Validating existing uBoot...
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
Connecting to jeff.doozan.com (50.116.34.13:80)
valid-uboot.md5 100% |*******************************| 1133 --:--:-- ETA
## Unknown uBoot detected on mtd0: 16488096daecc61685f38ba91392f229
##
## The installer could not detect the version of your current uBoot
## This may happen if you have installed a different uBoot on
## /dev/mtd0 or if you have bad blocks on /dev/mtd0
##
## If you have bad blocks on mtd0, you should not try to install uBoot.
##
## Installation cancelled.
-bash-3.2# The installer could not detect the version of your current uBoot
-bash: The: command not found
-bash-3.2# ## This may happen if you have installed a different uBoot on
-bash-3.2# ## /dev/mtd0 or if you have bad blocks on /dev/mtd0