Pogoplug E02 Debian Cardserver mit IPC

login as: root
root@192.168.178.100's password:
Linux pimpmypogo 3.2.0-4-kirkwood #1 Debian 3.2.46-1 armv5tel
Willkommen am Debian CS-Server IPC
IPC Befehle : ipc : i
CCcam Befehle : cccam : c
OScam Befehle : oscam : o
NewCS Befehle : newcs : n
Camd3 Befehle : camd3 : c3
sBox Befehle : sbox : s
Last login: Thu Nov 28 12:17:09 2013 from 192.168.178.112
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes
255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd4c090ed

Device Boot Start End Blocks Id System
/dev/sdb1 2 1953519615 976759807 83 Linux
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000204883968 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525164 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd783d39d

Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953521663 976759808 83 Linux
root@pimpmypogo ~ > apt-get update
Hit stable/updates Release.gpg
Hit stable/updates Release
Hit stable Release.gpg
Hit sarge Release.gpg
Hit stable Release
Hit sarge Release
Hit stable/updates/main Sources
Hit stable/updates/contrib Sources
Hit stable/updates/non-free Sources
Hit stable/updates/main armel Packages
Hit stable/updates/contrib armel Packages
Hit stable/updates/non-free armel Packages
Hit stable/updates/contrib Translation-en
Hit stable/updates/main Translation-en
Hit stable/main Sources
Hit stable/updates/non-free Translation-en
Hit sarge Release.gpg
Hit stable/contrib Sources
Hit sarge/contrib armel Packages
Hit stable/non-free Sources
Hit stable/main armel Packages
Hit stable/contrib armel Packages
Hit stable/non-free armel Packages
Hit stable/contrib Translation-en
Hit stable/main Translation-en
Ign sarge/contrib Translation-en
Hit stable/non-free Translation-en
Hit sarge Release
Hit sarge/contrib armel Packages
Ign sarge/contrib Translation-en
Reading package lists... Done
root@pimpmypogo ~ > apt-get install ntfs-3g
Reading package lists... Done
Building dependency tree
Reading state information... Done
ntfs-3g is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
samba is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > mount ntfs-3g /dev/sdb1 /media/sharemount
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount /dev/sdb2 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share

Reading state information... Done
samba is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
root@pimpmypogo ~ > mount ntfs-3g /dev/sdb1 /media/sharemount
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb1 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount /dev/sdb2 /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb /media/sharemount
NTFS signature is missing.
Failed to mount '/dev/sdb': Invalid argument
The device '/dev/sdb' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount /dev/sdb /media/sharemount
mount: mount point /media/sharemount does not exist
root@pimpmypogo ~ > mount /dev/sdb /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > nano /etc/samba/smb.conf
root@pimpmypogo ~ > mount /dev/sdb /media/share
mount: mount point /media/share does not exist
root@pimpmypogo ~ > mount -t /dev/sdb /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > fdisk -l

Disk /dev/mtdblock0: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock2: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders, total 65536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 95 MB, 95420416 bytes
255 heads, 63 sectors/track, 11 cylinders, total 186368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/sda: 7862 MB, 7862353920 bytes
63 heads, 62 sectors/track, 3931 cylinders, total 15356160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xddc91de2

Device Boot Start End Blocks Id System
/dev/sda1 * 62 3475455 1737697 83 Linux
/dev/sda2 3475456 3999743 262144 82 Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000204883968 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525164 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd783d39d

Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953521663 976759808 83 Linux
root@pimpmypogo ~ >
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb1 /media/share
NTFS signature is missing.
Failed to mount '/dev/sdb1': Invalid argument
The device '/dev/sdb1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t ntfs-3g /dev/sdb /media/share
NTFS signature is missing.
Failed to mount '/dev/sdb': Invalid argument
The device '/dev/sdb' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
root@pimpmypogo ~ > mount -t /dev/sdb /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t /dev/sdb1 /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ > mount -t /dev/sdb1 /media/share
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@pimpmypogo ~ >