Pingulux+smargo+V13 Karte

[Alex]

AW: Pingulux+smargo+V13 Karte

Was steht denn im Log? Kannst ja die Datei auch ihne WebIf öffnen

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Das log zeigt immer noch die alte oscamversion an.
Habe oscam per ftp reinkopiert die alte gestoppt und die neue gestartet

 

[Alex]

AW: Pingulux+smargo+V13 Karte

Hast du die REchte der neuen auf 755 gesetzt?

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Ja habe ich

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Habe es hinbekommen

 

[Pilot]

AW: Pingulux+smargo+V13 Karte

Wie hast du es hinbekommen.

Wäre nett, wenn du es mitteilen würdest. Dann haben andere user auch was davon.

Mlg piloten

 

[Alex]

AW: Pingulux+smargo+V13 Karte

Läuft dann jetzt alles?

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Bis jetzt läuft alles super,muß aber noch ein bischen testen.
Ich habe das alte oscam plugin erst gelöscht und das neue wieder eingespielt und natürlich die Rechte auf 755 gesetzt und siehe da es wurde hell.

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Hallo,

ich habe jetzt ein Problem mit meiner weißen HD+ Karte im Pingu.
Nach ungefähr 10 Minuten fängt das Bild an zu ruckeln und friert ein und es steht verschlüsselt da. Ich starte Plugin neu und es geht wieder 10 Minuten.
Kann mir jemand helfen?

logfile

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Jul 10 14:41:32 2012
-------------------------------------------------------------------------------
2012/07/10 14:41:32 2AED44E8 r >> OSCam << cardserver log switched, version 1.10rc-svn, build #5954 (sh4-amino-linux)
2012/07/10 14:41:32 2AED44E8 r version=1.10rc-svn, build #5954, system=sh4-amino-linux, nice=-1
2012/07/10 14:41:32 2AED44E8 r client max. idle=120 sec, debug level=0
2012/07/10 14:41:32 2AED44E8 r max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/10 14:41:32 2AED44E8 r client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/07/10 14:41:32 2AED44E8 r usb bulk write failed : ret = -7

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jul 10 15:26:12 2012
-------------------------------------------------------------------------------
2012/07/10 15:26:12 296BB000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5954 (sh4-amino-linux)
2012/07/10 15:26:12 296BB000 s version=1.10rc-svn, build #5954, system=sh4-amino-linux, nice=-1
2012/07/10 15:26:12 296BB000 s client max. idle=120 sec, debug level=0
2012/07/10 15:26:12 296BB000 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/10 15:26:12 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/07/10 15:26:12 296BB000 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/07/10 15:26:12 296BB000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/07/10 15:26:12 296BB000 s signal handling initialized (type=sysv)
2012/07/10 15:26:12 296BB000 s oscam.srvid loading failed, old format
2012/07/10 15:26:12 296BB000 s 112 tier-id's loaded
2012/07/10 15:26:12 296BB000 s 4 provid's loaded
2012/07/10 15:26:12 296BB000 s 1 lengths for caid guessing loaded
2012/07/10 15:26:12 296BB000 s monitor: initialized (fd=7, port=988)
2012/07/10 15:26:12 296BB000 s camd33: disabled
2012/07/10 15:26:12 296BB000 s camd35: disabled
2012/07/10 15:26:12 296BB000 s cs378x: disabled
2012/07/10 15:26:12 296BB000 s newcamd: disabled
2012/07/10 15:26:12 296BB000 s radegast: disabled
2012/07/10 15:26:12 2A6D44E8 h HTTP Server listening on port 8888
2012/07/10 15:26:12 296BB000 s http thread started
2012/07/10 15:26:12 296BB000 s creating thread for device Serial:Reader 310C4AC
2012/07/10 15:26:12 2AED44E8 r reader thread started (thread=2AED44E8, label=reader_1, device=Serial:Reader 310C4AC, detect=cd, mhz=357, cardmhz=357)
2012/07/10 15:26:12 2AED44E8 r Using 0x82 as endpoint for smartreader hardware detection
2012/07/10 15:26:12 296BB000 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/10 15:26:12 296BB000 s waiting for local card init
2012/07/10 15:26:12 2AED44E8 r Found reader with serial Reader xxxxx at 001:004
2012/07/10 15:26:12 2AED44E8 r Found smartreader device Serial:Reader xxxxxxx
2012/07/10 15:26:13 2AED44E8 r reader_1 card detected
2012/07/10 15:26:23 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:26:33 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:26:43 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:26:53 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:27:04 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:27:14 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:27:24 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:27:34 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:27:44 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:06 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:16 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:26 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:36 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:46 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:28:57 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:29:07 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:29:17 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:29:27 2AED44E8 r usb bulk write failed : ret = -7
2012/07/10 15:29:37 2AED44E8 r usb bulk write failed : ret = -7

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:00:53 2000
-------------------------------------------------------------------------------
2000/01/01 0:00:53 296BB000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5954 (sh4-amino-linux)
2000/01/01 0:00:53 296BB000 s version=1.10rc-svn, build #5954, system=sh4-amino-linux, nice=-1
2000/01/01 0:00:53 296BB000 s client max. idle=120 sec, debug level=0
2000/01/01 0:00:53 296BB000 s max. logsize=10 Kb, loghistorysize=4096 bytes
2000/01/01 0:00:53 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:00:53 296BB000 s The current system time is smaller than the build date (Sep 11 2011). Waiting 5s for time to correct...
2000/01/01 0:00:58 296BB000 s The current system time is smaller than the build date (Sep 11 2011). Waiting 5s for time to correct...
2012/07/10 15:34:38 296BB000 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2012/07/10 15:34:38 296BB000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/07/10 15:34:38 296BB000 s signal handling initialized (type=sysv)
2012/07/10 15:34:38 296BB000 s oscam.srvid loading failed, old format
2012/07/10 15:34:38 296BB000 s 112 tier-id's loaded
2012/07/10 15:34:38 296BB000 s 4 provid's loaded
2012/07/10 15:34:38 296BB000 s 1 lengths for caid guessing loaded
2012/07/10 15:34:38 296BB000 s monitor: initialized (fd=7, port=988)
2012/07/10 15:34:38 296BB000 s camd33: disabled
2012/07/10 15:34:38 296BB000 s camd35: disabled
2012/07/10 15:34:38 296BB000 s cs378x: disabled
2012/07/10 15:34:38 296BB000 s newcamd: disabled
2012/07/10 15:34:38 296BB000 s radegast: disabled
2012/07/10 15:34:38 2A6D44E8 h HTTP Server listening on port 8888
2012/07/10 15:34:38 296BB000 s http thread started
2012/07/10 15:34:38 296BB000 s creating thread for device Serial:Reader 310C4AC
2012/07/10 15:34:38 2AED44E8 r reader thread started (thread=2AED44E8, label=reader_1, device=Serial:Reader xxxxx, detect=cd, mhz=357, cardmhz=357)
2012/07/10 15:34:38 2AED44E8 r Using 0x82 as endpoint for smartreader hardware detection
2012/07/10 15:34:38 296BB000 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/10 15:34:38 296BB000 s waiting for local card init
2012/07/10 15:34:38 2AED44E8 r Found reader with serial Reader xxxx at 001:004
2012/07/10 15:34:38 2AED44E8 r Found smartreader device Serial:Reader xxxxx
2012/07/10 15:34:38 2AED44E8 r reader_1 card detected
2012/07/10 15:34:41 2AED44E8 r ATR:
2012/07/10 15:34:42 2AED44E8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] parental lock setting: FF FF FF FF
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] type: VideoGuard Sky Germany, caid: 09C4
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] serial: 00365B9A, BoxID: 12345678, baseyear: 1997
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] ready for requests
2012/07/10 15:34:44 2AED44E8 r found cardsystem videoguard2
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] reader_1 card detected
2012/07/10 15:34:44 2AED44E8 r [videoguard2-reader] type: VideoGuard Sky Germany
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 007b, expiry date: 2005/10/23-00:01:00 Sky Action HD
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 007c, expiry date: 2005/10/23-00:01:00 Sky Cinema Hits HD
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 0082, expiry date: 2005/10/23-00:01:00 Discovery HD
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 008e, expiry date: 2005/10/23-00:01:00
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 008f, expiry date: 2005/10/23-00:01:00
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 00f3, expiry date: 2005/10/23-00:01:00
2012/07/10 15:34:49 2AED44E8 r [videoguard2-reader] tier: 00fa, expiry date: 2005/10/23-00:01:00
2012/07/10 15:34:57 296BB000 s init for all local cards done
2012/07/10 15:34:57 296BB000 s anti cascading disabled
2012/07/10 15:34:57 2E0004E8 c plain dvbapi-client granted (local, au=auto (1 reader))
2012/07/10 15:34:57 2E0004E8 c dvbapi: 2 entries read from oscam.dvbapi

 

[Pilot]

AW: Pingulux+smargo+V13 Karte

Im Log seh ich keine HD+ karte.

Ich seh auch nicht, wie du auf HD+ Sender zugreifst.
Hast du im Log was nicht gezeigt?


Hast du den pingulux neu gebootet nach dieser Fehlermeldung?:

2012/07/10 15:26:23 2AED44E8 r usb bulk write failed : ret = -7
Das sollstest du tun.
Mlg piloten

 

[GreatJo]

AW: Pingulux+smargo+V13 Karte

Hi hotcirl

Das Problem hatte ich als HBBTV auf Ein geschaltet war. Stell es mal auf aus!

Gruß
GreatJo

 

[hotcirl]

AW: Pingulux+smargo+V13 Karte

Hallo,

hatte neu gestartet. HBBTV ist ausgeschaltet.
HD+ läuft im internen Reader mit mcas

log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Jul 10 19:12:15 2012
-------------------------------------------------------------------------------
2012/07/10 19:12:15 296BB000 s >> OSCam << cardserver log switched, version 1.10rc-svn, build #5954 (sh4-amino-linux)
2012/07/10 19:12:15 296BB000 s version=1.10rc-svn, build #5954, system=sh4-amino-linux, nice=-1
2012/07/10 19:12:15 296BB000 s client max. idle=120 sec, debug level=0
2012/07/10 19:12:15 296BB000 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/10 19:12:15 296BB000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/07/10 19:12:15 296BB000 s 112 tier-id's loaded
2012/07/10 19:12:15 296BB000 s 4 provid's loaded
2012/07/10 19:12:15 296BB000 s 1 lengths for caid guessing loaded
2012/07/10 19:12:15 296BB000 s monitor: initialized (fd=7, port=988)
2012/07/10 19:12:15 296BB000 s camd33: disabled
2012/07/10 19:12:15 296BB000 s camd35: disabled
2012/07/10 19:12:15 296BB000 s cs378x: disabled
2012/07/10 19:12:15 296BB000 s newcamd: disabled
2012/07/10 19:12:15 296BB000 s radegast: disabled
2012/07/10 19:12:15 2A6D44E8 h HTTP Server listening on port 8888
2012/07/10 19:12:15 296BB000 s http thread started
2012/07/10 19:12:15 296BB000 s creating thread for device Serial:Reader 310C4AC
2012/07/10 19:12:15 2AED44E8 r reader thread started (thread=2AED44E8, label=reader_1, device=Serial:Reader 310C4AC, detect=cd, mhz=357, cardmhz=357)
2012/07/10 19:12:15 2AED44E8 r Using 0x82 as endpoint for smartreader hardware detection
2012/07/10 19:12:15 296BB000 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/10 19:12:15 296BB000 s waiting for local card init
2012/07/10 19:12:15 2AED44E8 r Found reader with serial Reader 310C4AC at 001:004
2012/07/10 19:12:15 2AED44E8 r Found smartreader device Serial:Reader 310C4AC
2012/07/10 19:12:15 2AED44E8 r reader_1 card detected
2012/07/10 19:12:18 2AED44E8 r ATR:
2012/07/10 19:12:19 2AED44E8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] parental lock setting: FF FF FF FF
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] type: VideoGuard Sky Germany, caid: 09C4
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] serial: 00365B9A, BoxID: 12345678, baseyear: 1997
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] ready for requests
2012/07/10 19:12:22 2AED44E8 r found cardsystem videoguard2
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] reader_1 card detected
2012/07/10 19:12:22 2AED44E8 r [videoguard2-reader] type: VideoGuard Sky Germany
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 007b, expiry date: 2005/10/23-00:01:00 Sky Action HD
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 007c, expiry date: 2005/10/23-00:01:00 Sky Cinema Hits HD
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 0082, expiry date: 2005/10/23-00:01:00 Discovery HD
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 008e, expiry date: 2005/10/23-00:01:00
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 008f, expiry date: 2005/10/23-00:01:00
2012/07/10 19:12:32 2AED44E8 r [videoguard2-reader] tier: 00f3, expiry date: 2005/10/23-00:01:00
2012/07/10 19:12:33 2AED44E8 r [videoguard2-reader] tier: 00fa, expiry date: 2005/10/23-00:01:00
2012/07/10 19:12:47 296BB000 s init for all local cards done
2012/07/10 19:12:47 296BB000 s anti cascading disabled
2012/07/10 19:12:47 2D6D74E8 c plain dvbapi-client granted (local, au=auto (1 reader))
2012/07/10 19:12:47 2D6D74E8 c dvbapi: 2 entries read from oscam.dvbapi
2012/07/10 19:13:26 2D6D74E8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2012/07/10 19:13:26 2D6D74E8 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2012/07/10 19:13:26 2D6D74E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2012/07/10 19:13:26 2D6D74E8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2012/07/10 19:13:26 2D6D74E8 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2012/07/10 19:13:26 2D6D74E8 c dvbapi: new program number: EF74 (1830:EF74 unknown)
2012/07/10 19:13:26 2D6D74E8 c dvbapi: Start descrambling PID #2 (CAID: 09C4) 1
2012/07/10 19:13:26 2D6D74E8 c local (09C4&000000/EF74/58:59DA): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:28 2D6D74E8 c local (09C4&000000/EF74/58:AF00): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:31 2D6D74E8 c dvbapi: new program number: 283D (0000:283D unknown)
2012/07/10 19:13:33 2D6D74E8 c dvbapi: new program number: 2B66 (0000:2B66 unknown)
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CAA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1AAA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 4] CAID: 0648 ECM_PID: 1FAA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: [ADD PID 5] CAID: 1860 ECM_PID: 1EAA PROVID: 000000
2012/07/10 19:13:34 2D6D74E8 c dvbapi: new program number: EF15 (1830:EF15 unknown)
2012/07/10 19:13:35 2D6D74E8 c dvbapi: Start descrambling PID #2 (CAID: 09C4) 1
2012/07/10 19:13:35 2D6D74E8 c local (09C4&000000/EF15/58:3A56): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:39 2D6D74E8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CEC PROVID: 000000
2012/07/10 19:13:39 2D6D74E8 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19EC PROVID: 000000
2012/07/10 19:13:39 2D6D74E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
2012/07/10 19:13:39 2D6D74E8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1AEC PROVID: 000000
2012/07/10 19:13:39 2D6D74E8 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1EEC PROVID: 000000
2012/07/10 19:13:39 2D6D74E8 c dvbapi: new program number: EF75 (1830:EF75 unknown)
2012/07/10 19:13:39 2D6D74E8 c dvbapi: Start descrambling PID #2 (CAID: 09C4) 1
2012/07/10 19:13:39 2D6D74E8 c local (09C4&000000/EF75/58:6674): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:42 2D6D74E8 c local (09C4&000000/EF75/58:54E1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:49 2D6D74E8 c local (09C4&000000/EF75/58:AA31): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:13:56 2D6D74E8 c local (09C4&000000/EF75/58:B9C4): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:14:03 2D6D74E8 c local (09C4&000000/EF75/58:69F4): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:14:10 2D6D74E8 c local (09C4&000000/EF75/58:AA2A): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:14:17 2D6D74E8 c local (09C4&000000/EF75/58:FBC4): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:14:24 2D6D74E8 c local (09C4&000000/EF75/58:F0B1): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2012/07/10 19:14:31 2D6D74E8 c local (09C4&000000/EF75/58:8E10): rejected group (0 ms) (of 0 avail 0) (no matching reader)

 

[Pilot]

AW: Pingulux+smargo+V13 Karte

teste es mal mit dem Einsetzen von services.


Mlg piloten

 

[hotcirl]

Es läuft mit mcas 1.4 v

bei mcas kann man doch kein services einsetzen oder?

 

[Pilot]

AW: Pingulux+smargo+V13 Karte

du zeigst ein log von oscam. Da hat mcas überhaupt nichts zu mit.
Also war mein Tip zum Einsatz von services für oscam gedacht.

Mlg piloten