Pi umstieg von HD+ zu V14

Sycho1812 · 22. Februar 2015

Hallo zusammen,

ich hoffe ihr könnte mir weiterhelfen.

Auf meinem Pi läuft ein Oscam Server (build r10134) der bis heute einem CCcam Client mit HD+ versorgte nun wollte ich die se durch eine V14 austauschen.
Nach ersten recherchen scheint das Thema nicht ganz so leicht zu sein und ich muss gestehen das ich da so nicht hintersteige zumindest bis jetzt.
Die V14 Karte wurde ca. 3 Tage im Original Receiver verwendet, wo ich mir schon nicht sicher bin ob das nicht der Größte Fehler war.
Bei der Config änderungen habe folgende Threads beachtet 1 und 2.

Gruß Berti

Auf jedenfall habe ich die Config wie folgt geändert:

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8837
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /usr/local/log/oscam.log
fallbacktimeout = 2000
nice = -19
maxlogsize = 50000
preferlocalcards = 1
bindwait = 40
waitforcards = 0
waitforcards_extra_delay = 550
dropdups = 1
block_same_ip = 0
emmlogdir = /usr/local/log/
lb_mode = 0

[cache]
delay = 5

[cccam]
port = 11552
nodeid = 6B83A597106014CE
version = 2.3.0
reshare = 1
reshare_mode = 1
stealth = 1

[monitor]
port = 988
nocrypt = 192.168.50.0-192.168.50.255
aulow = 120
monlevel = 1
hideclient_to = 30

[webif]
httpport =
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 30

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10134
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V14
description = S*Y
protocol = smartreader
device = Serial:Reader 91C976D
autospeed = 0
caid = 098C
boxid = 55667788
ins7e11 = 15
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2
detect = cd
mhz = 368
cardmhz = 368
group = 1

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8837
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user =
pwd =
caid = 098C
group = 1
cccmaxhops = 1
au =V14

Log nach dem Reboot

2015/02/22 18:12:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10134 (arm-linux-gnueabihf)
2015/02/22 18:12:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2221
2015/02/22 18:12:58 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/02/22 18:12:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/02/22 18:12:58 0 s signal handling initialized
2015/02/22 18:12:58 0 s monitor: initialized (fd=4, port=988)
2015/02/22 18:12:58 0 s cccam: initialized (fd=5, port=11552)
2015/02/22 18:12:58 0 s V14 [smartreader] creating thread for device Serial:Reader 91C976D
2015/02/22 18:12:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/22 18:12:58 0 s anti cascading disabled
2015/02/22 18:12:58 B8E2B8 h webif: decompressed 143965 bytes back into 354380 bytes
2015/02/22 18:12:58 B872C0 r V14 [smartreader] Reader initialized (device=Serial:Reader 91C976D, detect=cd, mhz=343, cardmhz=343)
2015/02/22 18:12:58 B8E2B8 h HTTP Server running. ip=0.0.0.0 port=11011
2015/02/22 18:12:59 B872C0 r V14 [smartreader] card detected
2015/02/22 18:13:02 B968A0 c encrypted cccam-client 192.168.50.221 granted (BertiHD, au=on (1 reader))
2015/02/22 18:13:03 B872C0 r V14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/22 18:13:03 B872C0 r V14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/02/22 18:13:03 B872C0 r V14 [smartreader] Calculated work ETU is 27.11 us reader mhz = 343
2015/02/22 18:13:03 B872C0 r V14 [smartreader] Effective reader settings mhz =343 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2015/02/22 18:13:03 B872C0 r V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2015/02/22 18:13:05 B872C0 r V14 [smartreader] Card type: P1TV
2015/02/22 18:13:05 B872C0 r V14 [smartreader] Rom version: 20AA
2015/02/22 18:13:05 B872C0 r V14 [smartreader] Credit available on card: 0 euro
2015/02/22 18:13:05 B872C0 r V14 [smartreader] Extended 4C detected
2015/02/22 18:13:05 B872C0 r V14 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/02/22 18:13:05 B872C0 r V14 [smartreader] found card system videoguard2
2015/02/22 18:13:05 B872C0 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/22 18:13:05 B872C0 r V14 [videoguard2] card detected
2015/02/22 18:13:05 B872C0 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/22 18:13:05 B872C0 r V14 [smartreader] Error activating card.
2015/02/22 18:13:08 0 --- Skipped 1 duplicated log lines ---
2015/02/22 18:13:08 B968A0 c BertiHD (098C&000000/0C1E/006B/98:92BE5E7A6260210A0978005AA92FEB6D): rejected group (1 ms) (no matching reader)
2015/02/22 18:13:08 B872C0 r V14 [smartreader] Error activating card.
2015/02/22 18:13:09 B872C0 r V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/22 18:13:09 B872C0 r V14 [smartreader] card initializing error
2015/02/22 18:13:15 B968A0 c BertiHD (098C&000000/0C1E/006B/98:4B1DE18C893286F6C71A88222EE090A4): rejected group (0 ms) (no matching reader)
2015/02/22 18:13:22 B968A0 c BertiHD (098C&000000/0C1E/006B/98:CA4ED14CF75E6D449C2479474DB0F8A5): rejected group (0 ms) (no matching reader)
2015/02/22 18:13:29 B968A0 c BertiHD (098C&000000/0C1E/006B/98:EF8C3356E237D6AC255D911EBE84ED11): rejected group (0 ms) (no matching reader)
2015/02/22 18:13:36 B968A0 c BertiHD (098C&000000/0C1E/006B/98:7931E21A4DAB7D9E860FDF586FA8EE75): rejected group (0 ms) (no matching reader)

Extended Log

2015/02/22 18:48:36 B968A0 c BertiHD (098C&000000/0C1E/006B/98:ED08E7C729D09103F71806312E66846C): rejected group (0 ms) (no matching reader)
2015/02/22 18:48:41 B8E2B8 h all debug_level=65535
2015/02/22 18:48:41 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:42 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:42 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:42 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:43 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:43 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:43 B968A0 c [OSCAM-WORK] new event 1 occurred on fd 16 after 7000 ms inactivity
2015/02/22 18:48:43 B968A0 c cccam(s) BertiHD: parse_msg=1
2015/02/22 18:48:43 B968A0 c cccam(s) BertiHD: ECM request from client: caid 098c srvid 006b(152) prid 000000
2015/02/22 18:48:43 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NEW REQUEST!
2015/02/22 18:48:43 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} NO local readers, set preferlocalcards = 0
2015/02/22 18:48:43 B968A0 c [GET_CW] wait_time 0 caid 098C prov 000000 srvid 006B rc 100 cacheex cl mode 0 ex1rdr 0
2015/02/22 18:48:43 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] wait_time 0 - client cacheex mode 0, reader avail for ecm 0, hitcache 0, preferlocalcards 0
2015/02/22 18:48:43 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NO Readers and NO wait_time... not_found!
2015/02/22 18:48:43 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [send_dcw] rc 4 from reader -
2015/02/22 18:48:43 B968A0 c Client BertiHD csphash 6918F26C cw 00000000000000000000000000000000 rc 4 098C&000000/0C1E/006B/98:FA0E74791EAFF4F3CC0840CA81DE37BC
2015/02/22 18:48:43 B968A0 c BertiHD (098C&000000/0C1E/006B/98:FA0E74791EAFF4F3CC0840CA81DE37BC): rejected group (1 ms) (no matching reader)
2015/02/22 18:48:43 B968A0 c cw:
2015/02/22 18:48:43 B968A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 18:48:44 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:44 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:44 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:45 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:45 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:46 B8E2B8 h WebIf: Received stale header from 192.168.50.26 (nonce=35fa13c38052d3cc380b181144711ff3, expectednonce=c490cf2d93869b6f8d3286dd2b613d31, opaque=d2eebf8dcc33d746d177d16b5451e394).
2015/02/22 18:48:46 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:46 0 --- Skipped 1 duplicated log lines ---
2015/02/22 18:48:46 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:46 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:47 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:47 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:48 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:48 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:48 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:49 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:49 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:49 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:50 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:50 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:50 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:50 B968A0 c [OSCAM-WORK] new event 1 occurred on fd 16 after 7000 ms inactivity
2015/02/22 18:48:50 B968A0 c cccam(s) BertiHD: parse_msg=1
2015/02/22 18:48:50 B968A0 c cccam(s) BertiHD: ECM request from client: caid 098c srvid 006b(152) prid 000000
2015/02/22 18:48:50 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NEW REQUEST!
2015/02/22 18:48:50 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} NO local readers, set preferlocalcards = 0
2015/02/22 18:48:50 B968A0 c [GET_CW] wait_time 0 caid 098C prov 000000 srvid 006B rc 100 cacheex cl mode 0 ex1rdr 0
2015/02/22 18:48:50 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] wait_time 0 - client cacheex mode 0, reader avail for ecm 0, hitcache 0, preferlocalcards 0
2015/02/22 18:48:50 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NO Readers and NO wait_time... not_found!
2015/02/22 18:48:50 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [send_dcw] rc 4 from reader -
2015/02/22 18:48:50 B968A0 c Client BertiHD csphash 43D97929 cw 00000000000000000000000000000000 rc 4 098C&000000/0C1E/006B/98:6DDCF370CC7723C5706385EA2989F45C
2015/02/22 18:48:50 B968A0 c BertiHD (098C&000000/0C1E/006B/98:6DDCF370CC7723C5706385EA2989F45C): rejected group (1 ms) (no matching reader)
2015/02/22 18:48:50 B968A0 c cw:
2015/02/22 18:48:50 B968A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 18:48:51 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:51 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:51 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:52 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:52 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:53 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:53 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:53 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:54 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:54 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:54 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:55 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:55 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:55 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:56 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:56 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:56 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:57 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:57 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:57 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:57 B968A0 c [OSCAM-WORK] new event 1 occurred on fd 16 after 7000 ms inactivity
2015/02/22 18:48:57 B968A0 c cccam(s) BertiHD: parse_msg=1
2015/02/22 18:48:57 B968A0 c cccam(s) BertiHD: ECM request from client: caid 098c srvid 006b(152) prid 000000
2015/02/22 18:48:57 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NEW REQUEST!
2015/02/22 18:48:57 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} NO local readers, set preferlocalcards = 0
2015/02/22 18:48:57 B968A0 c [GET_CW] wait_time 0 caid 098C prov 000000 srvid 006B rc 100 cacheex cl mode 0 ex1rdr 0
2015/02/22 18:48:57 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] wait_time 0 - client cacheex mode 0, reader avail for ecm 0, hitcache 0, preferlocalcards 0
2015/02/22 18:48:57 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NO Readers and NO wait_time... not_found!
2015/02/22 18:48:57 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [send_dcw] rc 4 from reader -
2015/02/22 18:48:57 B968A0 c Client BertiHD csphash C5590D31 cw 00000000000000000000000000000000 rc 4 098C&000000/0C1E/006B/98:E29B6F3A1D8101E2483F24C865CA810B
2015/02/22 18:48:57 B968A0 c BertiHD (098C&000000/0C1E/006B/98:E29B6F3A1D8101E2483F24C865CA810B): rejected group (1 ms) (no matching reader)
2015/02/22 18:48:57 B968A0 c cw:
2015/02/22 18:48:57 B968A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 18:48:58 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:58 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:48:58 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:48:59 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:48:59 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:00 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:49:00 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:49:00 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:01 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:49:01 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:01 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:49:02 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:49:02 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:02 B8E2B8 h WebIf: Received stale header from 192.168.50.26 (nonce=c490cf2d93869b6f8d3286dd2b613d31, expectednonce=88da3f1e739248a3a4fc873e330e013b, opaque=d2eebf8dcc33d746d177d16b5451e394).
2015/02/22 18:49:02 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:49:03 0 --- Skipped 1 duplicated log lines ---
2015/02/22 18:49:03 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:49:03 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:03 B8E2B8 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 18:49:04 B872C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 18:49:04 B872C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 18:49:04 B968A0 c [OSCAM-WORK] new event 1 occurred on fd 16 after 7000 ms inactivity
2015/02/22 18:49:04 B968A0 c cccam(s) BertiHD: parse_msg=1
2015/02/22 18:49:04 B968A0 c cccam(s) BertiHD: ECM request from client: caid 098c srvid 006b(152) prid 000000
2015/02/22 18:49:04 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NEW REQUEST!
2015/02/22 18:49:04 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} NO local readers, set preferlocalcards = 0
2015/02/22 18:49:04 B968A0 c [GET_CW] wait_time 0 caid 098C prov 000000 srvid 006B rc 100 cacheex cl mode 0 ex1rdr 0
2015/02/22 18:49:04 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] wait_time 0 - client cacheex mode 0, reader avail for ecm 0, hitcache 0, preferlocalcards 0
2015/02/22 18:49:04 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NO Readers and NO wait_time... not_found!
2015/02/22 18:49:04 B968A0 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [send_dcw] rc 4 from reader -
2015/02/22 18:49:04 B968A0 c Client BertiHD csphash E2CEE38D cw 00000000000000000000000000000000 rc 4 098C&000000/0C1E/006B/98:4D962E5C465E91D6BADE8642CAFBA833
2015/02/22 18:49:04 B968A0 c BertiHD (098C&000000/0C1E/006B/98:4D962E5C465E91D6BADE8642CAFBA833): rejected group (1 ms) (no matching read

supraracer · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Deine Karte wird nicht sauber gelesen sobald OScam in den fastmode gehen will. Ist ein häufiges Problem mit den Smargos, teste mal mit
ins7e11 = 13
Nach der Änderung OScam neu starten. Dann mal ein Log im Debug Mode 6 (4+2) posten damit man sieht ob die Karte schon gepairt wurde.

-supraracer

Sycho1812 · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Danke schon mal für die schnelle Rückmeldung!

Wie stelle ich den Debug mode 6 ein?

Log mit der Einstellung "ALL"

2015/02/22 19:41:08 1502590 c BertiHD (098C&000000/0C1E/006B/98:A5C9D17067B044BFCC29372743066C38): rejected group (1 ms) (no matching reader)
2015/02/22 19:41:08 1502590 c cw:
2015/02/22 19:41:08 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:41:08 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:09 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:09 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:10 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:10 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:10 1505450 h WebIf: Received stale header from 192.168.50.26 (nonce=d4e67d671d4b5d09967235c39c16a776, expectednonce=3c144ffa232ee68656650fa15e1e4709, opaque=d2eebf8dcc33d746d177d16b5451e394).
2015/02/22 19:41:10 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:11 0 --- Skipped 1 duplicated log lines ---
2015/02/22 19:41:11 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:11 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:11 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:12 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:12 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:12 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:13 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:13 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:13 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:14 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:14 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:15 14F62C0 r V14 [smartreader] IFD: the status of card in or out old procedure for v1 2
2015/02/22 19:41:15 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:41:15 1505450 h WebIf: Origin checked. Result: access from 192.168.50.26 => allowed
2015/02/22 19:41:15 1502590 c [OSCAM-WORK] new event 1 occurred on fd 14 after 7000 ms inactivity
2015/02/22 19:41:15 1502590 c cccam(s) BertiHD: parse_msg=1
2015/02/22 19:41:15 1502590 c cccam(s) BertiHD: ECM request from client: caid 098c srvid 006b(152) prid 000000
2015/02/22 19:41:15 1502590 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NEW REQUEST!
2015/02/22 19:41:15 1502590 c {client BertiHD, caid 098C, prid 000000, srvid 006B} NO local readers, set preferlocalcards = 0
2015/02/22 19:41:15 1502590 c [GET_CW] wait_time 0 caid 098C prov 000000 srvid 006B rc 100 cacheex cl mode 0 ex1rdr 0
2015/02/22 19:41:15 1502590 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] wait_time 0 - client cacheex mode 0, reader avail for ecm 0, hitcache 0, preferlocalcards 0
2015/02/22 19:41:15 1502590 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [get_cw] NO Readers and NO wait_time... not_found!
2015/02/22 19:41:15 1502590 c {client BertiHD, caid 098C, prid 000000, srvid 006B} [send_dcw] rc 4 from reader -
2015/02/22 19:41:15 1502590 c Client BertiHD csphash 35CA7792 cw 00000000000000000000000000000000 rc 4 098C&000000/0C1E/006B/98:5046A4A52C7B9565B86E2F3F08F39113
2015/02/22 19:41:15 1502590 c BertiHD (098C&000000/0C1E/006B/98:5046A4A52C7B9565B86E2F3F08F39113): rejected group (1 ms) (no matching reader)

supraracer · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Im OScam Webinterface auf der Statusseite ganz unten "Switch Debug from" auf 2 und 4 klicken. Dann auf Sky Krimi schalten und den V14 Reader neu starten.

-supraracer

Sycho1812 · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

ah ok gefunden....

2015/02/22 19:45:20 0 --- Skipped 6 duplicated log lines ---
2015/02/22 19:45:20 1502590 c BertiHD (098C&000000/0C1E/006B/98:3EC17CC837B4077D028467747A09E863): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:20 1502590 c cw:
2015/02/22 19:45:20 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:21 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:27 0 --- Skipped 6 duplicated log lines ---
2015/02/22 19:45:27 1502590 c BertiHD (098C&000000/0C1E/006B/98:7E102CD377FB45CC95A798C8F83B903C): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:27 1502590 c cw:
2015/02/22 19:45:27 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:28 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:31 0 --- Skipped 2 duplicated log lines ---
2015/02/22 19:45:31 1502590 c BertiHD (098C&000000/01FB/0017/98:EC3EC7B0338BEB0100E436EC0A91CF6A): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:31 1502590 c cw:
2015/02/22 19:45:31 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:31 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:33 0 --- Skipped 1 duplicated log lines ---
2015/02/22 19:45:33 1502590 c BertiHD (098C&000000/01FB/0017/98:086F7571DA1379276DD80A01743498D1): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:33 1502590 c cw:
2015/02/22 19:45:33 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:33 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:39 0 --- Skipped 5 duplicated log lines ---
2015/02/22 19:45:39 1502590 c BertiHD (098C&000000/01FB/0017/98C8F408682E0A4E80DD58621E771E18F): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:39 1502590 c cw:
2015/02/22 19:45:39 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:39 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:47 0 --- Skipped 7 duplicated log lines ---
2015/02/22 19:45:47 1502590 c BertiHD (098C&000000/01FB/0017/98:6ED0690542229EC16488A5ED0E14E907): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:47 1502590 c cw:
2015/02/22 19:45:47 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:47 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:45:55 0 --- Skipped 7 duplicated log lines ---
2015/02/22 19:45:55 1502590 c BertiHD (098C&000000/01FB/0017/98:073F48015B7E26D6ED463181325D9A40): rejected group (0 ms) (no matching reader)
2015/02/22 19:45:55 1502590 c cw:
2015/02/22 19:45:55 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:45:55 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:46:02 0 --- Skipped 7 duplicated log lines ---
2015/02/22 19:46:02 1502590 c BertiHD (098C&000000/01FB/0017/98:C91C606621986F9167BAFAA1D728770F): rejected group (0 ms) (no matching reader)
2015/02/22 19:46:02 1502590 c cw:
2015/02/22 19:46:02 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:46:03 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:46:10 0 --- Skipped 7 duplicated log lines ---
2015/02/22 19:46:10 1502590 c BertiHD (098C&000000/01FB/0017/98C5580CF45A14400A1FDDEC40DF0607E): rejected group (1 ms) (no matching reader)
2015/02/22 19:46:10 1502590 c cw:
2015/02/22 19:46:10 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:46:11 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/02/22 19:46:18 0 --- Skipped 7 duplicated log lines ---
2015/02/22 19:46:18 1502590 c BertiHD (098C&000000/01FB/0017/98:6A8581F764A575064547626FB1CEA9A5): rejected group (0 ms) (no matching reader)
2015/02/22 19:46:18 1502590 c cw:
2015/02/22 19:46:18 1502590 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/02/22 19:46:19 14F62C0 r V14 [smartreader] cardreader_do_checkhealth: reader->card_status = 3, ret = 0

Switch Debug from 6 to

Sie müssen registriert sein, um Links zu sehen.

4

supraracer · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Da passt was nicht, wird die Karte denn jetzt überhaupt gelesen?
Schau noch mal ob du
ins7e11 = 13
gesetzt hast, dann Debug auf 0 stellen, ganze OScam neu starten und Log hier posten.

-supraracer

Sycho1812 · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Den wert habe ich difinitiv gesetzt.

Log nach dem Reboot (Debug = 0)

2015/02/22 20:39:31 20800F0 h HTTP Server running. ip=0.0.0.0 port=11011
2015/02/22 20:39:31 207E2C0 r V14 [smartreader] Reader initialized (device=Serial:Reader 91C976D, detect=cd, mhz=343, cardmhz=343)
2015/02/22 20:39:32 207E2C0 r V14 [smartreader] card detected
2015/02/22 20:39:33 208E2D8 c encrypted cccam-client 192.168.50.221 granted (BertiHD, au=on (1 reader))
2015/02/22 20:39:34 208E2D8 c BertiHD (098C&000000/01FB/0017/98:FB747356B9603C5A0EE455ED382FDDBD): rejected group (0 ms) (no matching reader)
2015/02/22 20:39:35 207E2C0 r V14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/22 20:39:35 207E2C0 r V14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/02/22 20:39:35 207E2C0 r V14 [smartreader] Calculated work ETU is 27.11 us reader mhz = 343
2015/02/22 20:39:35 207E2C0 r V14 [smartreader] Effective reader settings mhz =343 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2015/02/22 20:39:36 207E2C0 r V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Card type: P1TV
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Rom version: 20AA
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Credit available on card: 0 euro
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Extended 4C detected
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] FuseByte: 25
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Region Code: 00BO0102
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Country Code: DEU
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] Pincode read: 1234
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] PCB settings: FF FF FF FF
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] ready for requests
2015/02/22 20:39:37 207E2C0 r V14 [smartreader] found card system videoguard2
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] card detected
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 0046, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 0065, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 0066, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 0067, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 0068, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 006f, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 007b, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 008e, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00c0, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00c7, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00c8, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00c9, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00ca, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00f3, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00fa, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:37 207E2C0 r V14 [videoguard2] tier: 00ff, expiry date: 2015/04/18-01:00:00
2015/02/22 20:39:42 208E2D8 c BertiHD (098C&000000/01FB/0017/98:B7530BA924E7E0C0A460C2B81604B557): found (181 ms) by V14
2015/02/22 20:39:48 208E2D8 c BertiHD (098C&000000/01FB/0017/98:F56DE28525CF51D402A33A479179B06F): found (139 ms) by V14
2015/02/22 20:39:55 208E2D8 c BertiHD (098C&000000/01FB/0017/98:3C9478A46BE14635A845DDC55B5986B6): found (141 ms) by V14
2015/02/22 20:40:02 208E2D8 c BertiHD (098C&000000/01FB/0017/98:75C55ED5DA6B8492D2388BB807B3C30B): found (141 ms) by V14
2015/02/22 20:40:09 208E2D8 c BertiHD (098C&000000/01FB/0017/98:27930734DBDBCEC0E84F02F851485697): found (140 ms) by V14
2015/02/22 20:40:16 208E2D8 c BertiHD (098C&000000/01FB/0017/98:E7E5E2A3F1750E778BE87A94892BB6E2): found (141 ms) by V14
2015/02/22 20:40:23 208E2D8 c BertiHD (098C&000000/01FB/0017/98:9C24B4529B961272DBDDBBE98DC1D1CC): found (141 ms) by V14
2015/02/22 20:40:30 208E2D8 c BertiHD (098C&000000/01FB/0017/98:85880671778D967A654EFAD4E3AD58E3): found (140 ms) by V14

krikssus · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

jetzt dürfte es ja nach dem log her passen.
zeiten sehen auch gut aus

Sycho1812 · 22. Februar 2015

AW: Pi umstieg von HD+ zu V14

Wow so wie es aussieht funktioniert es!!!

Danke!

Suche

Suche

Pi umstieg von HD+ zu V14

Sycho1812

Newbie

supraracer

DEB Inventar

Sycho1812

Newbie

supraracer

DEB Inventar

Sycho1812

Newbie

supraracer

DEB Inventar

Sycho1812

Newbie

krikssus

Spezialist

Sycho1812

Newbie

Ähnliche Themen

Spenden Unterstützung