OscamEmu Server und Client verbinden GM990 und OpenWrt

[sugi6666]

Hallo,

ich bin ziemlicher Anfänger in Oscam, lese zwar viel durch, verstehe meistens aber leider nur Bahnhof und es wäre nett, wenn ich ein wenig Hilfestellung bekommen könnte.

Hardware:
Client: GM990 Reloaded, OpenATV 5.3, OscamEmu r11272, IP:192.168.9.9
Server: Seagate GoFlexNet, OpenWrt 15.05, OscamEmu r11273, IP:192.168.9.23

Der Server soll rein als Emu-Server laufen, um dann das Dekodieren der PowerVU-Kanäle zu übernehmen.

Ich habe jetzt verschiedene Konfigurationen ergoogelt und versucht das Ganze für meine Bedürfnisse zusammenzufrickeln, aber es scheitert anscheinend schon daran, die beiden Geräte miteinander zu verbinden.

Server Configs:

Spoiler: oscam.conf

[global]
serverip = 192.168.9.23
logfile = /tmp/oscam.log
clientmaxidle = 160
nice = 1
maxlogsize = 2048

[cache]

[dvbapi]
enabled = 1
au = 1
boxtype = ipbox
user = local
pmt_mode = 0

[streamrelay]
stream_ecm_delay = 680
stream_relay_enabled = 1

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[cs357x]
port = 25000

Spoiler: oscam.server

[reader]
label = oscam_emu
enable = 1
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1
emmcache = 1,2,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

Spoiler: oscam.user

[account]
user = test
pwd = test
uniq = 1
group = 1
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
au = oscam_emu

Spoiler: livelog

• 2016/10/15 08:26:59 00000000 s (main) System name = Linux
• 2016/10/15 08:26:59 00000000 s (main) Host name = (none)
• 2016/10/15 08:26:59 00000000 s (main) Release = 3.18.23
• 2016/10/15 08:26:59 00000000 s (main) Version = #1 Sun Jan 31 11:40:01 CET 2016
• 2016/10/15 08:26:59 00000000 s (main) Machine = armv5tel
• 2016/10/15 08:26:59 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2003
• 2016/10/15 08:26:59 00000000 s [Emu] oscam-emu version 732
• 2016/10/15 08:26:59 00000000 s (main) signal handling initialized
• 2016/10/15 08:26:59 00000000 s (config) ERROR: Cannot create file "/usr/local/etc/oscam.srvid2.tmp" (errno=2 No such file or directory)
• 2016/10/15 08:26:59 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2016/10/15 08:26:59 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2016/10/15 08:26:59 00000000 s (main) waiting for local card init
• 2016/10/15 08:26:59 00000000 [Emu] info: FFDecsa parallel mode = 32
• 2016/10/15 08:26:59 169D2C27 r [Emu] cannot open key file path: /usr/local/etc
• 2016/10/15 08:26:59 169D2C27 r [Emu] reading key file: /var/keys/SoftCam.Key
• 2016/10/15 08:26:59 4B3C9733 h (webif) webif: decompressed 175192 bytes back into 430048 bytes
• 2016/10/15 08:26:59 4B3C9733 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2016/10/15 08:26:59 169D2C27 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2016/10/15 08:27:00 169D2C27 r (reader) emulator [emu] card detected
• 2016/10/15 08:27:01 169D2C27 r (reader) emulator [emu] found card system emu
• 2016/10/15 08:27:01 169D2C27 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2016/10/15 08:27:01 169D2C27 r [Emu] cannot open key file path: /usr/local/etc
• 2016/10/15 08:27:01 169D2C27 r [Emu] reading key file: /var/keys/SoftCam.Key
• 2016/10/15 08:27:02 00000000 s (main) init for all local cards done
• 2016/10/15 08:27:02 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2016/10/15 08:27:02 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2016/10/15 08:27:02 00000000 s (anticasc) anti cascading disabled
• 2016/10/15 08:27:02 783E055D c (client) plain dvbapi-client granted (anonymous, au=off)
• 2016/10/15 08:27:02 783E055D c (dvbapi) ERROR: Could not detect DVBAPI version.

Client Configs:

Spoiler: oscam.conf

[global]
logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1

[dvbapi]
enabled = 1
au = 1
boxtype = ipbox
user = local

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Spoiler: oscam.server

[reader]
label = camd35-reader
enable = 1
device = 192.168.9.23,25000
protocol = camd35
user = test
password = test
group = 1

Spoiler: oscam.user

[dvbapi]
enabled = 1
au = oscam_emu
boxtype = ipbox
user = local
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1

Spoiler: livelog

• 2016/10/15 10:59:48 00000000 s (main) System name = Linux
• 2016/10/15 10:59:48 00000000 s (main) Host name = sparkreloaded
• 2016/10/15 10:59:48 00000000 s (main) Release = 2.6.32.61_stm24_0217
• 2016/10/15 10:59:48 00000000 s (main) Version = #1 PREEMPT Thu Jul 7 06:29:41 CEST 2016
• 2016/10/15 10:59:48 00000000 s (main) Machine = sh4
• 2016/10/15 10:59:48 00000000 s (main) Stb model = spark
• 2016/10/15 10:59:48 00000000 s (main) Stb boxtype = spark
• 2016/10/15 10:59:48 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 25238
• 2016/10/15 10:59:48 00000000 s [Emu] oscam-emu version 732
• 2016/10/15 10:59:48 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2016/10/15 10:59:48 00000000 s (main) signal handling initialized
• 2016/10/15 10:59:48 00000000 s (reader) camd35-reader [cs357x] creating thread for device 192.168.9.23
• 2016/10/15 10:59:48 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2016/10/15 10:59:48 7C2C7C0B p (reader) camd35-reader [cs357x] proxy 192.168.9.23:25000
• 2016/10/15 10:59:48 7C2C7C0B p (reader) camd35-reader [cs357x] proxy initialized, server 192.168.9.23:25000
• 2016/10/15 10:59:48 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2016/10/15 10:59:48 00000000 s (main) waiting for local card init
• 2016/10/15 10:59:48 0740E553 r [Emu] key file not found in: /usr/keys/oscam_emu_modern
• 2016/10/15 10:59:48 0740E553 r [Emu] key file not found in: /var/keys
• 2016/10/15 10:59:48 00000000 [Emu] info: FFDecsa parallel mode = 32
• 2016/10/15 10:59:48 0740E553 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2016/10/15 10:59:48 0CAD9595 h (webif) webif: decompressed 172413 bytes back into 417288 bytes
• 2016/10/15 10:59:48 0CAD9595 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2016/10/15 10:59:49 0740E553 r (reader) emulator [emu] card detected
• 2016/10/15 10:59:50 0740E553 r (reader) emulator [emu] found card system emu
• 2016/10/15 10:59:50 0740E553 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2016/10/15 10:59:50 0740E553 r [Emu] key file not found in: /usr/keys/oscam_emu_modern
• 2016/10/15 10:59:50 0740E553 r [Emu] key file not found in: /var/keys
• 2016/10/15 10:59:51 00000000 s (main) init for all local cards done
• 2016/10/15 10:59:51 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2016/10/15 10:59:51 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2016/10/15 10:59:51 63A274CB c (client) plain dvbapi-client granted (anonymous, au=off)
• 2016/10/15 10:59:51 63A274CB c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_emu_modern/oscam.ccache
• 2016/10/15 10:59:51 63A274CB c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 5 maximum amount of possible filters is 25 (oscam limit is 32)
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 02ED PROVID: 060200
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 found 4 ECMpids and 8 STREAMpids in caPMT
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0500 PROVID 023800 ECMPID 02CF ANY CHID PMTPID 01FF VPID 0200
• 2016/10/15 10:59:54 0740E553 r [Emu] Key not found: V 23800 C1
• 2016/10/15 10:59:54 0740E553 r [Emu] ECM failed: Key not found
• 2016/10/15 10:59:54 7C2C7C0B p (reader) 192.168.9.23: resolved ip=192.168.9.23
• 2016/10/15 10:59:54 7C2C7C0B p (reader) camd35-reader [cs357x] connecting to 192.168.9.23:25000
• 2016/10/15 10:59:54 63A274CB c (dvbapi) Demuxer 0 found 4 ECMpids and 8 STREAMpids in PMT
• 2016/10/15 10:59:58 0740E553 r [Emu] Key not found: V 23800 C1
• 2016/10/15 10:59:58 0740E553 r [Emu] ECM failed: Key not found
• 2016/10/15 10:59:59 63A274CB c (ecm) anonymous (0500@023800/08E2/4332/2A:71C100B311990C0C65A88EB2ABC65920): timeout (5004 ms) by camd35-reader (F/2/2/2)
• 2016/10/15 11:00:03 63A274CB c (ecm) anonymous (0500@023800/08E2/4332/2A:02B0EDF18D26EF007E52EBBD9F4576B9): timeout (5004 ms) by camd35-reader (F/2/2/2)
• 2016/10/15 11:00:03 63A274CB c (ecm) anonymous (0500@023800/08E2/4332/2A:02B0EDF18D26EF007E52EBBD9F4576B9): not found (3804 ms) by camd35-reader (F/2/2/2)
• 2016/10/15 11:00:04 63A274CB c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0500 PROVID 040810 ECMPID 02D9 ANY CHID PMTPID 01FF VPID 0200
• 2016/10/15 11:00:09 63A274CB c (ecm) anonymous (0500@040810/18E2/4332/2A:8BAB563FB2FE6687280EA443D3EE2264): timeout (5006 ms) by camd35-reader
• 2016/10/15 11:00:13 63A274CB c (ecm) anonymous (0500@040810/18E2/4332/2A:9F889DDC47E965CBC5C0798F5B950C82): timeout (5004 ms) by camd35-reader
• 2016/10/15 11:00:13 63A274CB c (ecm) anonymous (0500@040810/18E2/4332/2A:9F889DDC47E965CBC5C0798F5B950C82): not found (4006 ms) by camd35-reader
• 2016/10/15 11:00:14 63A274CB c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 050800 ECMPID 02E3 ANY CHID PMTPID 01FF VPID 0200
• 2016/10/15 11:00:19 63A274CB c (ecm) anonymous (0500@050800/08E2/4332/2A:0332FD5357197FAED99D49BC1FB8227C): timeout (5004 ms) by camd35-reader
• 2016/10/15 11:00:23 63A274CB c (ecm) anonymous (0500@050800/08E2/4332/2A:3C3E00C212938973E627E80042CB61D5): timeout (5006 ms) by camd35-reader

Ich bin für jede Hilfe dankbar...

MfG

 

[Osprey]

Der Server soll rein als Emu-Server laufen, um dann das Dekodieren der PowerVU-Kanäle zu übernehmen.

MfG

Hi, soviel ich weiß sind die PowerVU Sender schon länger dicht über osemu. SRF sollte noch gehen.

 

[sugi6666]

Das AFN-Paket auf 9E ist noch offen. Desweiteren wollte ich auch mal NSS 20°W testen. Spielt aber auch keine Rolle, das Kompilieren für die Seagate hat viele Nerven gekostet und ich will das ganze zumindest zu Ende bringen.
Testen tue ich bereits mit SRF, aber die Verbindung klappt nicht.

 

[Osprey]

Probiere mal das cs378x Protokoll statt cs357x.

Gesendet von meinem SM-T535 mit Tapatalk

 

[sugi6666]

Hat nicht geholfen. Habe jetzt auf dem Server "netstat -tulpn" probiert,
anscheinend ist der Port 25000 nicht geöffnet.

Spoiler: netstat -tulpn

root@OpenWrt:/# netstat -tulpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 2550/smbd
tcp 0 0 0.0.0.0:17999 0.0.0.0:* LISTEN 1999/oscam
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2520/uhttpd
tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 2524/dnsmasq
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2434/dropbear
tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 1999/oscam
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 2550/smbd
tcp 0 0 :::139 :::* LISTEN 2550/smbd
tcp 0 0 :::80 :::* LISTEN 2520/uhttpd
tcp 0 0 :::53 :::* LISTEN 2524/dnsmasq
tcp 0 0 :::22 :::* LISTEN 2434/dropbear
tcp 0 0 :::445 :::* LISTEN 2550/smbd
udp 0 0 0.0.0.0:53 0.0.0.0:* 2524/dnsmasq
udp 0 0 0.0.0.0:137 0.0.0.0:* 2551/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 2551/nmbd
udp 0 0 :::546 :::* 2633/odhcp6c
udp 0 0 :::547 :::* 2370/odhcpd
udp 0 0 :::53 :::* 2524/dnsmasq