Quantcast
Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Oscam VU Solo 4K - HD02 - nix geht...

Birdmaster

Newbie
Registriert
8. Januar 2016
Beiträge
6
Reaktionspunkte
0
Punkte
1
Hallo an alle,

danke für das super Forum. Habe hier schon viel gelesen und dadurch jede Menge dazugelernt :-)

Aber ich bin kurz vorm technischen Wahnsinn...

Habe eine Solo 4K mit Image vom 08. Januar, soweit okay.
Oscam läuft nach Installation des ipk für ARM auch in der Version 11208.

Versuche eine HD02 Karte zum Laufen zu bringen, aber nix geht...

Die Karte wurde über HD+ verlängert, Betrag bezahlt.

Habe in der dvbapi den Wert #P: 1843:003411 1 gesetzt, damit die Aktivierung ankommt, aber nix.

Auch verstehe ich nicht, warum die Solo 4K bzw. Oscam die Karte mit dem Reader für HD01 anspricht, angeblich im Slot unten, obwohl sie im oberen steckt.

Wer kann mir bitte helfen, was soll ich machen, was soll ich hier posten?

Der Reader sagt die Karte wäre "Cardok"... aber mein Wissen ist bei weitem nicht okay.

Danke für Hilfe,
Grüße,
Birdmaster :-)
 
Zuletzt bearbeitet von einem Moderator:
AW: Oscam VU Solo 4K - HD02 - nix geht...

Habe in der dvbapi den Wert #P: 1843:003411 1 gesetzt, damit die Aktivierung ankommt, aber nix.

Mit dem # hast Du die Zeile auskommentiert und sie wird nicht gelesen.
Ändere das einfach mal ab auf P: 1843
Wenn das nichts nützt, poste mal die gesamten Configs im Spoiler.
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

Danke, ja du hast recht, hab das geändert, meine Dateien sehen jetzt so aus:

oscam.conf
[global]
logfile = /etc/tuxbox/config/oscam.log
emmlogdir = /etc/tuxbox/config/
maxlogsize = 1024
nice = -1
waitforcards = 1
clienttimeout = 600000

[dvbapi]
enabled = 1
user = local
boxtype = dreambox

[webif]
httpport = 19001
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11208
# Read more:

[account]
user = dvbapiau
uniq = 3
au = 1
group = 1,2,3,4,5

oscam.server
[reader]
label = hdplus02
protocol = internal
device = /dev/sci1
caid = 1843
ecmwhitelist = 1843:89
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 450
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2,0
auprovid = 003411

oscam.dvbapi
P: 1843 1
I: 1830
I: 09c4

LiveLog
  • 2016/01/10 20:06:24 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:24 1150B680 c (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:06:24 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:25 1150B680 c (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:06:25 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:25 1150B680 c (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:06:25 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:25 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (2 ms) by hdplus02
  • 2016/01/10 20:06:26 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:26 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:26 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:D5AAE2B1FDD547DC1359D6D7F1AC4383): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:27 1150B680 c (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:06:27 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (331 ms) by hdplus02
  • 2016/01/10 20:06:27 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (231 ms) by hdplus02
  • 2016/01/10 20:06:28 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:28 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:28 1150B680 c (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:06:28 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:29 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:29 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (1 ms) by hdplus02
  • 2016/01/10 20:06:29 1150B680 c (ecm) anonymous (1843@000000/0000/EF10/89:A3B9A73E4FE3D95D96202590542FB76B): not found (3 ms) by hdplus02
  • 2016/01/10 20:06:30 1150B680 c (-) -- Skipped 1 duplicated log lines --

Danke!
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

User in oscam.conf und oscam.user müssen gleich sein:

oscam.conf:
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
oscam.user:
[account]
user = local
uniq = 3
au = 1
group = 1,2,3,4,5

oscam.dvbapi:
Code:
P: 1843
P: 09C4
I: 0
 
Zuletzt bearbeitet:
AW: Oscam VU Solo 4K - HD02 - nix geht...

bei der oscam.dvbapi wird alles ignoriert @d2z

im DVBapi Abschnitt fehlt

au = 1

Auch verstehe ich nicht, warum die Solo 4K bzw. Oscam die Karte mit dem Reader für HD01 anspricht, angeblich im Slot unten, obwohl sie im oberen steckt.
wird diese jetzt über den richtigen Reader eingelesen?
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

für die HD02 wär auch 1843 richtig, also:
Code:
P: 1843
I: 0

wenn noch andere Caids vorhanden sind einfach mit einem P: vor dem I:0 einfügen
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

Danke für eure Hilfe.

Habe eure Änderungen eingefügt.

Log sieht jetzt so aus

  • 2016/01/10 20:35:07 00000000 s (main) System name = Linux
  • 2016/01/10 20:35:07 00000000 s (main) Host name = vusolo4k
  • 2016/01/10 20:35:07 00000000 s (main) Release = 3.14.28-1.8
  • 2016/01/10 20:35:07 00000000 s (main) Version = #1 SMP Wed Nov 25 06:05:46 CET 2015
  • 2016/01/10 20:35:07 00000000 s (main) Machine = armv7l
  • 2016/01/10 20:35:07 00000000 s (main) Stb model = dm8000
  • 2016/01/10 20:35:07 00000000 s (main) Stb vumodel = vusolo4k
  • 2016/01/10 20:35:07 00000000 s (main) Stb boxtype = vusolo4k
  • 2016/01/10 20:35:07 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 8607
  • 2016/01/10 20:35:07 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2016/01/10 20:35:07 00000000 s (main) signal handling initialized
  • 2016/01/10 20:35:07 00000000 s (reader) hdplus02 [internal] creating thread for device /dev/sci1
  • 2016/01/10 20:35:07 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2016/01/10 20:35:07 00000000 s (main) waiting for local card init
  • 2016/01/10 20:35:07 1E8EA882 r (reader) hdplus02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
  • 2016/01/10 20:35:07 1E8EA882 r (reader) hdplus02 [internal] Reader sci internal, detected box type: vusolo4k
  • 2016/01/10 20:35:07 2D728E53 h (webif) webif: decompressed 165763 bytes back into 394784 bytes
  • 2016/01/10 20:35:07 2D728E53 h (webif) HTTP Server running. ip=0.0.0.0 port=19001
  • 2016/01/10 20:35:08 1E8EA882 r (reader) hdplus02 [internal] card detected
  • 2016/01/10 20:35:09 1E8EA882 r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2016/01/10 20:35:09 1E8EA882 r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2016/01/10 20:35:09 1E8EA882 r (reader) hdplus02 [internal] Calculated work ETU is 7.11 us reader mhz = 450
  • 2016/01/10 20:35:12 1E8EA882 r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 3095531
  • 2016/01/10 20:35:13 1E8EA882 r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2016/01/10 20:35:13 1E8EA882 r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
  • 2016/01/10 20:35:14 1E8EA882 r (reader) hdplus02 [internal] detect native nagra card
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [internal] ready for requests
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [internal] found card system nagra
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] ROM: D N A S P 1 8 0
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] REV: M e r 0 0 0
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] SER: ############
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] CAID: 1843
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] Prv.ID: 00 00 34 11 (sysid)
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] Prv.ID: 00 00 00 00
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] IRD ID: ############
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] active to: 2012/06/19 12:59
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] -----------------------------------------
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] |id |tier |valid from |valid to |
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] +----+--------+------------+------------+
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] |8011|0066 |2011/04/28 |2012/04/28 |
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
  • 2016/01/10 20:35:15 1E8EA882 r (reader) hdplus02 [nagra] -----------------------------------------
  • 2016/01/10 20:35:16 00000000 s (main) init for all local cards done
  • 2016/01/10 20:35:16 00000000 s (emmcache) loaded 0 emmcache records from /usr/keys/oscam_atv/oscam.emmcache in 0 ms
  • 2016/01/10 20:35:16 00000000 s (emmcache) loaded 0 emmstat records from /usr/keys/oscam_atv/oscam.emmstat in 0 ms
  • 2016/01/10 20:35:16 00000000 s (anticasc) anti cascading disabled
  • 2016/01/10 20:35:16 7E65995F c (client) plain dvbapi-client granted (local, au=auto (1 reader))
  • 2016/01/10 20:35:16 7E65995F c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
  • 2016/01/10 20:35:16 7E65995F c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00ff length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0103 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0105 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0030 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 0106 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0107 length: 0)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in caPMT
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 serving srvid EF10 (1830@000000:EF10 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0060
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00ff length: 6)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0103 length: 12)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 10)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0105 length: 5)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0030 length: 10)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 0106 length: 14)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0107 length: 3)
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
  • 2016/01/10 20:35:18 7E65995F c (dvbapi) Demuxer 0 serving srvid EF10 (1830@000000:EF10 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0060
  • 2016/01/10 20:35:23 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:35:51 1E8EA882 r (-) -- Skipped 5 duplicated log lines --
  • 2016/01/10 20:35:51 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (626 ms)
  • 2016/01/10 20:35:52 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:35:55 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (610 ms)
  • 2016/01/10 20:35:56 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:35:59 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (597 ms)
  • 2016/01/10 20:36:01 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:03 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=2: written (588 ms)
  • 2016/01/10 20:36:06 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:07 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=2: written (602 ms)
  • 2016/01/10 20:36:10 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:11 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (586 ms)
  • 2016/01/10 20:36:15 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:15 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=3: written (589 ms)
  • 2016/01/10 20:36:19 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=3: written (605 ms)
  • 2016/01/10 20:36:20 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:23 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (585 ms)
  • 2016/01/10 20:36:25 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:35 1E8EA882 r (-) -- Skipped 2 duplicated log lines --
  • 2016/01/10 20:36:35 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (590 ms)
  • 2016/01/10 20:36:39 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:47 1E8EA882 r (-) -- Skipped 1 duplicated log lines --
  • 2016/01/10 20:36:47 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (587 ms)
  • 2016/01/10 20:36:48 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2016/01/10 20:36:59 1E8EA882 r (-) -- Skipped 2 duplicated log lines --
  • 2016/01/10 20:36:59 1E8EA882 r (reader) hdplus02 [nagra] local emmtype=global, len=139 (hex: 0x8B), cnt=1: written (588 ms)
  • 2016/01/10 20:37:03 7E65995F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

richtige Caid eingetragen, bzw. die oscam.dvbapi ist jetzt richtig?
den laut log wird die Karte nicht direkt angesprochen, EMM kommen aber an...
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

Danke in der oscam.dvbapi steht jetzt nur noch

P: 1843
I: 0

Muss da eine 1 bei der P Zeile dahinter für die Aktivierung?

Log sieht jetzt so aus:
  • 2016/01/10 20:46:37 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:37 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:38 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (343 ms) by hdplus02
  • 2016/01/10 20:46:38 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:38 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:38 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (61 ms) by hdplus02
  • 2016/01/10 20:46:39 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:39 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:39 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:40 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:40 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:40 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:41 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:41 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:41 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:42 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:42 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:42 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:43 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:43 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:43 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:44 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:44 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:44 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:45 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:45 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
  • 2016/01/10 20:46:45 7E65995F c (ecm) local (1843@000000/0000/EF10/89:3598A43FA489BD3FBC9FD3DAF0B06A13): not found (1 ms) by hdplus02
  • 2016/01/10 20:46:46 7E65995F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
  • 2016/01/10 20:46:46 7E65995F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF

Ja, Server ist neu gestartet worden.
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

Danke, JUHUUUUUUUUUUUUUUUUUUU, ich hab ein Bild ....

Soll ich die P:09C4 noch einsetzen und wofür V14? Sorry, dumme Frage...
 
AW: Oscam VU Solo 4K - HD02 - nix geht...

Soll ich die P:09C4 noch einsetzen und wofür V14? Sorry, dumme Frage...

Nur, wenn Du die V14 Sky Karte hast.
Da Du sie in der oscam.dvbapi drin stehen hattest, ging ich davon aus, dass Du die Karte auch hast.
Wenn Du sie nicht hast, lass alles, wie es ist.
 
Zurück
Oben