OSCAM unerklärbare Timeout´s

speckthehut · 23. Oktober 2012

Hallo!

So ein Thema gab es hier schon ein paar mal, doch gab es leider keine Problemlösung dazu. Deshalb hier ein neuer Thread von Mir.

Auf meiner HD01 (1830) und auf der Sky SAT (09C4) gibt es nach ein paar Tagen immer wieder Timeouts auf den Karten. Die kommen aus heiterem Himmel, so als wenn die Karte einfach mal eine Pause machen will. Lokal habe ich noch die Karten UM01 (1831), SKY UM (1722) und Redlight HD (0500) ohne Probleme am laufen. Alle Karten hingen bis eben noch an einem König USB Hub Passiv, doch habe ich jetzt zwei Easymäuse so an den Server gehanden, so das nur noch 3 Easymäuse Passiv am USB hängen.
Das ganze läuft Perfekt für bis zu 1 Woche. Danach muss ich schon einen kompletten Serverneustart machen um den Fehler für mehrere Tage auszuschließen.

Mein Server ist ein IGEL Thin Client mit 1 GB RAM und CF Card als Massenspeicher mit Debian.

Leider habe ich es versäumt ein Backup vom LOG zu machen und der Neustart vom Server hat die Daten verschluckt da sie im RAM waren. Nach möglichkeit reiche ich Sie nach. Doch da steht dann sowas wie: USER [TIME DATE] 31135151 Sky_V13 timeout 4700ms
Die Zeiten vorher waren alle funktionsfähig bei bis zu 120 ms

Derzeit gehen mir die Ideen aus was das verursachen könnte? Wird das doch an dem USB Hub liegen?! Oder ist da doch ein Hardwaredefekt die Ursache?
Meine configs:

OSCAM.conf

[global]
logfile = /var/log/ipc/OScam.log
clienttimeout = 4700
fallbacktimeout = 2600
clientmaxidle = 300
nice = 0
maxlogsize = 4096
cacheexwaittime = 300
lb_save = 5000
lb_savepath = /mnt/usb-stick/stat
failbantime = 10080
failbancount = 2

[cs357x]
port = xxxxx

[cs378x]
port = xxxxx

[cccam]
port = xxxxx
nodeid = xxxxx
version = 2.3.0
reshare = 2
ignorereshare = 1

[webif]
httpport = xxxxx
httpuser = xxxxx
httppwd = xxxxx
httpcss = /var/etc/maerklin_DEB_style.css
httphelplang = de
httprefresh = 15
httpallowed = 192.168.0.0-192.168.255.255

OSCAM.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7754
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = sky_um_i12
description = SKY Unitymedia I12 Vollabo
protocol = mouse
device = /dev/EASYMOUSE2-2
services = !um_negativ,!umbasic,sky-um,sky-um-hd,!sky-um-ppv,!sky-um-bb,!skywelt,!skyweltextra,!skyfilm,!skysport,!skybundesliga,!skyhd,!sky3d,!bluemovie,!skyselect,!skysonstige,!astra-hd,!orf,!austriasat,!hd+
boxkey = 1122334455667788
ecmwhitelist = 1722:93;1835:89
detect = cd
mhz = 600
cardmhz = 600
ident = 1722:000000;1835:000000,000401,001103
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 300
dropbadcws = 1

[reader]
label = sky_satellit_v13
description = Sky SAT V13
protocol = mouse
device = /dev/EASYMOUSE2-3
services = !um_negativ,!umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,skywelt,skyweltextra,skyfilm,skysport,skybundesliga,skyhd,sky3d,bluemovie,skyselect,skysonstige,astra-hd,!orf,!austriasat,!hd+,!redlight
caid = 09C4
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 09C4:46,58,90,95
detect = cd
mhz = 600
cardmhz = 357
ident = 09C4:000000
group = 4
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300
dropbadcws = 1
ndsversion = 2

[reader]
label = um01
description = Unitymedia UM01
protocol = mouse
device = /dev/EASYMOUSE2-1
services = !um_negativ,umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,!skywelt,!skyweltextra,!skyfilm,!skysport,!skybundesliga,!skyhd,!sky3d,!bluemovie,!skyselect,!skysonstige,!astra-hd,!orf,!austriasat,!hd+
caid = 1831
rsakey = Bxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
boxkey = Axxxxxxxxxxxxxxxx
detect = cd
mhz = 357
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 300
dropbadcws = 1

[reader]
label = um02_extern
protocol = cccam
device = xxxxxxxxxxxx
user = xxxxxxxx
password = xxxxxxxxx
caid = 1838
group = 3
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
audisabled = 1

[reader]
label = camd3_emu
description = Camd3 EMU
protocol = camd35
device = localhost,24110
user = xxxx
password = xxxxx
services = !um_negativ,!umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,!skywelt,!skyweltextra,!skyfilm,!skysport,!skybundesliga,!skyhd,!sky3d,!bluemovie,!skyselect,!skysonstige,!astra-hd,orf,austriasat,!hd+
reconnecttimeout = 20
caid = 0D05,0D95
group = 6
lb_weight = 200
audisabled = 1

[reader]
label = hd+
description = Weisse HD+ 1830
protocol = mouse
device = /dev/EASYMOUSE2-4
services = !um_negativ,!umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,!skywelt,!skyweltextra,!skyfilm,!skysport,!skybundesliga,!skyhd,!sky3d,!bluemovie,!skyselect,!skysonstige,!astra-hd,!orf,!austriasat,hd+,!redlight
caid = 1830
rsakey = Bxxxxxxxxxxxxxxxxxxxxxxxxxxx
boxkey = Axxxxxxxxxxxxxxx
ecmwhitelist = 1830:92
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 5
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 300

[reader]
label = redlight
description = Redlight 12
protocol = mouse
device = /dev/EASYMOUSE2-5
services = !um_negativ,!umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,!skywelt,!skyweltextra,!skyfilm,!skysport,!skybundesliga,!skyhd,!sky3d,!bluemovie,!skyselect,!skysonstige,!astra-hd,!orf,!austriasat,!hd+,redlight
caid = 0500
detect = cd
mhz = 368
cardmhz = 368
group = 7
emmcache = 1,3,2
lb_weight = 300

OSCAM.user (Einer der Problem User, doch es macht nicht nur wie hier die Golden Media 990 Box, sondern auch meine Dreambox

[account]
user = xxxxxxxxx
pwd = xxxxxxxxxx
caid = 09C4,0D05,0D95,1830,0500
keepalive = 1
group = 4,5,6,7,11,12
services = !um_negativ,!umbasic,!sky-um,!sky-um-hd,!sky-um-ppv,!sky-um-bb,skywelt,skyweltextra,skyfilm,skysport,skybundesliga,skyhd,sky3d,!bluemovie,!skyselect,skysonstige,!astra-hd,orf,austriasat,hd+,redlight
cccmaxhops = 5
cccignorereshare = 1

OSCAM.services

# oscam.services generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7563
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[um_negativ]
caid = 1831,1835,1838,1722
provid =
srvid = 4AAC,3331,332E,6210,3330,2B65,3B00,3718,372C,69E3,4AAA,565F,2B64,332D,332F,3335,3338,371F,3333,3334,2B66,372B,371E,4AAB,6217,371D,3AFD,3AFE,3AFF,371C,3B0C,3339,2F50,6211,3B03,3B02,6212,3B08,0018,3337,3716,3B04,3B05,3B07,3719,526D,526E,526F,5272,5270,5271,6DD0,42DA,69EA,5274,5273,71B5,71B6,69E9,759B,759C,6DCF,4E96,6606
[umbasic]
caid = 1831
provid =
srvid = 2F45,2F46,2F4A,2F47,2F49,2F48,2F4E,2F4D,2F4B,2F4F,2B60,5E2B,2B5E,42D8,4E94,5E2C,5E2A,71B4,3B06,5E2E,5E29,5E2D,5667,2B63,5E28,75A0,42DC,5A49,4E91,5E27,75A2,69DF,2F4C,5E25
[sky-um]
caid = 1722
provid = 000000
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0022,0024,0029,002A,002B,0032,0034,001E,003C,003D,003E,003F,0040,0041,0042,0043,0044,0096,0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00FD,0107,0111,011B,0125,012F,0139,0143,014D,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC,0201,0203,0204,0206,07FF,2EFE,4461,4462,6FF1,700A
[sky-um-hd]
caid = 1722,1835
provid = 000000
srvid = 797D,90F0,90ED,90EE,90EF
[sky-um-ppv]
caid = 1722
provid = 000000
srvid = 0045,0046,006A,006B,006F,0070,0071,0072,0082,0083,0084,00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141,0148,0159,0163,016D
[sky-um-bb]
caid = 1722
provid = 000000
srvid = 000F
[skywelt]
caid = 09C4
provid =
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0201,0206,007C,0076
[skyweltextra]
caid = 09C4
provid =
srvid = 0021,0023,0025,0026,0027,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,07FF,2EFE,3331,4461,4462,700A
[skyfilm]
caid = 09C4
provid =
srvid = 0008,0009,000A,000B,0014,0019,0029,002B,0203,0204
[skysport]
caid = 09C4
provid =
srvid = 0011,001E,00DD,00DE,00FD,0107,0111,011B,0125,012F,0139,0143,014D,016B,0175,00F1
[skybundesliga]
caid = 09C4
provid =
srvid = 00FC,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160
[skyhd]
caid = 09C4
provid =
srvid = 0077,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,0071,006A,006B,006C,0072,0070,006E,006F,0069,007C,0076,0074,6FB8,00F2
[sky3d]
caid = 1833,09C4
provid =
srvid = 0075
[bluemovie]
caid = 09C4
provid =
srvid = 0201,0159,0163,016D
[skyselect]
caid = 1833,09C4
provid =
srvid = 0012,0078,0079,00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141,014B
[skysonstige]
caid = 1833,09C4
provid =
srvid = 0045,0046
[astra-hd]
caid = 09C4
provid =
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273,5274,2E9A,1519,151A
[orf]
caid = 0D95,0D05
provid = 000000,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,3332,4E27
[austriasat]
caid = 0D05,0D95
provid = 000000,000010
srvid = 003E,0045,07FA,07FD,07FF,2EFE,4461,4462,6FEE,6FEF,6FF0,6FF3,6FFF,003B
[hd+]
caid = 1830
provid = 000000,003411
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273,5274,2E9A,1519,151A
[redlight]
caid = 0500
provid = FFF8F0,043800,041700
srvid = 000A,227B,35C0,35C1,35C2,35C3,35C4,35C6,35C7,35C8,3787,378A,378D,4223,4224,4225,43B3

Die dmesg Ausgabe vom Server:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
[ 0.000000] 3 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f11f000 - 2f967354
[ 0.000000] ACPI: RSDP 000f4fd0 00014 (v00 CN700 )
[ 0.000000] ACPI: RSDT 3f6e3040 00028 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3f6e30c0 00074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3f6e3180 0454D (v01 CN700 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3f6e0000 00040
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
[ 0.000000] #4 [002f11f000 - 002f967354] RAMDISK ==> [002f11f000 - 002f967354]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d30b2] BRK ==> [00014cd000 - 00014d30b2]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6e0
[ 0.000000] On node 0 totalpages: 259695
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 33244 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:c08f0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=def49fda-bbd0-4ea1-802a-d03caf0286a4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f6e0)
[ 0.000000] Memory: 1015696k/1039232k available (2506k kernel code, 22456k reserved, 1326k data, 380k init, 134024k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.351 MHz processor.
[ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.70 BogoMIPS (lpj=3989404)
[ 0.008061] Security Framework initialized
[ 0.008076] SELinux: Disabled at boot.
[ 0.008095] Mount-cache hash table entries: 512
[ 0.008366] Initializing cgroup subsys ns
[ 0.008376] Initializing cgroup subsys cpuacct
[ 0.008388] Initializing cgroup subsys devices
[ 0.008396] Initializing cgroup subsys freezer
[ 0.008404] Initializing cgroup subsys net_cls
[ 0.008454] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008463] CPU: L2 Cache: 128K (64 bytes/line)
[ 0.008487] Performance Events:
[ 0.008497] Checking 'hlt' instruction... OK.
[ 0.024742] SMP alternatives: switching to UP code
[ 0.037949] Freeing SMP alternatives: 13k freed
[ 0.037985] ACPI: Core revision 20090903
[ 0.049007] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.050575] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.050583] weird, boot CPU (#0) not listed by the BIOS.
[ 0.050590] SMP motherboard not detected.
[ 0.050597] Local APIC not detected. Using dummy APIC emulation.
[ 0.050604] SMP disabled
[ 0.050907] Brought up 1 CPUs
[ 0.050916] Total of 1 processors activated (1994.70 BogoMIPS).
[ 0.050943] CPU0 attaching NULL sched-domain.
[ 0.051219] devtmpfs: initialized
[ 0.052548] regulator: core version 0.5
[ 0.052691] NET: Registered protocol family 16
[ 0.052917] ACPI: bus type pci registered
[ 0.061280] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=1
[ 0.061288] PCI: Using configuration type 1 for base access
[ 0.062362] bio: create slab <bio-0> at 0
[ 0.063781] ACPI: EC: Look up EC in DSDT
[ 0.078261] ACPI: Interpreter enabled
[ 0.078274] ACPI: (supports S0 S1 S4 S5)
[ 0.078343] ACPI: Using PIC for interrupt routing
[ 0.090822] ACPI: No dock devices found.
[ 0.091187] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.091297] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.091784] pci 0000:00:01.0: supports D1
[ 0.091881] pci 0000:00:0f.0: reg 20 io port: [0xeb00-0xeb0f]
[ 0.092028] pci 0000:00:10.0: reg 20 io port: [0xec00-0xec1f]
[ 0.092080] pci 0000:00:10.0: supports D1 D2
[ 0.092089] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092101] pci 0000:00:10.0: PME# disabled
[ 0.092175] pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
[ 0.092227] pci 0000:00:10.1: supports D1 D2
[ 0.092235] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092246] pci 0000:00:10.1: PME# disabled
[ 0.092320] pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
[ 0.092371] pci 0000:00:10.2: supports D1 D2
[ 0.092380] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092391] pci 0000:00:10.2: PME# disabled
[ 0.092465] pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
[ 0.092516] pci 0000:00:10.3: supports D1 D2
[ 0.092525] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092536] pci 0000:00:10.3: PME# disabled
[ 0.092588] pci 0000:00:10.4: reg 10 32bit mmio: [0xf6000000-0xf60000ff]
[ 0.092662] pci 0000:00:10.4: supports D1 D2
[ 0.092671] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092682] pci 0000:00:10.4: PME# disabled
[ 0.092774] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.092873] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.092949] pci 0000:00:11.5: supports D1 D2
[ 0.093006] pci 0000:00:12.0: reg 10 io port: [0xe400-0xe4ff]
[ 0.093023] pci 0000:00:12.0: reg 14 32bit mmio: [0xf6001000-0xf60010ff]
[ 0.093093] pci 0000:00:12.0: supports D1 D2
[ 0.093101] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093112] pci 0000:00:12.0: PME# disabled
[ 0.093199] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.093215] pci 0000:01:00.0: reg 14 32bit mmio: [0xf4000000-0xf4ffffff]
[ 0.093248] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.093292] pci 0000:01:00.0: supports D1 D2
[ 0.093359] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.093372] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.093390] pci_bus 0000:00: on NUMA node 0
[ 0.093405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.182232] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.182661] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.183096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 0.183471] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.183836] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.184204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.184558] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.184904] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.185200] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.185209] vgaarb: loaded
[ 0.185414] PCI: Using ACPI for IRQ routing
[ 0.185797] Switching to clocksource tsc
[ 0.188001] pnp: PnP ACPI init
[ 0.188001] ACPI: bus type pnp registered
[ 0.196192] pnp: PnP ACPI: found 11 devices
[ 0.196200] ACPI: ACPI bus type pnp unregistered
[ 0.196211] PnPBIOS: Disabled by ACPI PNP
[ 0.196244] system 00:00: iomem range 0xcda00-0xcffff has been reserved
[ 0.196257] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.196269] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.196281] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.196294] system 00:00: iomem range 0x3f6e0000-0x3f6fffff could not be reserved
[ 0.196307] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.196319] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.196332] system 00:00: iomem range 0x100000-0x3f6dffff could not be reserved
[ 0.196344] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.196357] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.196379] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.196390] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.196410] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.196421] system 00:03: ioport range 0x294-0x297 has been reserved
[ 0.231564] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.231573] pci 0000:00:01.0: IO window: disabled
[ 0.231587] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.231600] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.231630] pci 0000:00:01.0: setting latency timer to 64
[ 0.231645] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.231655] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.231666] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.231677] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.231781] NET: Registered protocol family 2
[ 0.232062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.233131] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.235572] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.236820] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.236830] TCP reno registered
[ 0.237082] NET: Registered protocol family 1
[ 0.237160] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.238273] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.238282] PCI: setting IRQ 11 as level-triggered
[ 0.238298] pci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.238330] pci 0000:00:10.0: PCI INT A disabled
[ 0.238356] pci 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.238383] pci 0000:00:10.1: PCI INT A disabled
[ 0.239246] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.239254] PCI: setting IRQ 10 as level-triggered
[ 0.239268] pci 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 0.239281] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10
[ 0.239322] pci 0000:00:10.2: PCI INT B disabled
[ 0.239348] pci 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 0.239359] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10
[ 0.239399] pci 0000:00:10.3: PCI INT B disabled
[ 0.240282] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.240294] pci 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.240341] pci 0000:00:10.4: PCI INT C disabled
[ 0.240354] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.240380] pci 0000:01:00.0: Boot video device
[ 0.240509] Unpacking initramfs...
[ 1.107199] Freeing initrd memory: 8480k freed
[ 1.122669] audit: initializing netlink socket (disabled)
[ 1.122700] type=2000 audit(1350980120.120:1): initialized
[ 1.134472] highmem bounce pool size: 64 pages
[ 1.134488] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.139207] VFS: Disk quotas dquot_6.5.2
[ 1.139410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.139621] msgmni has been set to 1739
[ 1.140216] alg: No test for stdrng (krng)
[ 1.140413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.140423] io scheduler noop registered
[ 1.140431] io scheduler anticipatory registered
[ 1.140438] io scheduler deadline registered
[ 1.140551] io scheduler cfq registered (default)
[ 1.141014] isapnp: Scanning for PnP cards...
[ 1.495198] isapnp: No Plug & Play device found
[ 1.498935] Linux agpgart interface v0.103
[ 1.499277] agpgart: Detected VIA VT3314 chipset
[ 1.509694] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.509784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.509943] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.510137] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.510758] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.511011] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.511400] PNP: No PS/2 controller found. Probing ports directly.
[ 1.511879] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.511901] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.512225] mice: PS/2 mouse device common for all mice
[ 1.512344] rtc_cmos 00:05: RTC can wake from S4
[ 1.512459] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.512501] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.512532] cpuidle: using governor ladder
[ 1.512539] cpuidle: using governor menu
[ 1.512551] No iBFT detected.
[ 1.513896] TCP cubic registered
[ 1.514392] NET: Registered protocol family 10
[ 1.517021] Mobile IPv6
[ 1.517030] NET: Registered protocol family 17
[ 1.517078] Using IPI No-Shortcut mode
[ 1.517310] PM: Resume from disk failed.
[ 1.517338] registered taskstats version 1
[ 1.517968] rtc_cmos 00:05: setting system clock to 2012-10-23 08:15:20 UTC (1350980120)
[ 1.518156] Initalizing network drop monitor service
[ 1.518231] Freeing unused kernel memory: 380k freed
[ 1.519079] Write protecting the kernel text: 2508k
[ 1.519161] Write protecting the kernel read-only data: 920k
[ 1.596399] udev[46]: starting version 164
[ 2.210216] SCSI subsystem initialized
[ 2.258939] usbcore: registered new interface driver usbfs
[ 2.259972] usbcore: registered new interface driver hub
[ 2.260655] usbcore: registered new device driver usb
[ 2.281466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.281559] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.281613] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.281694] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.281786] ehci_hcd 0000:00:10.4: irq 10, io mem 0xf6000000
[ 2.358150] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.358251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.358262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.358272] usb usb1: Product: EHCI Host Controller
[ 2.358281] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 2.358289] usb usb1: SerialNumber: 0000:00:10.4
[ 2.358566] usb usb1: configuration #1 chosen from 1 choice
[ 2.358666] hub 1-0:1.0: USB hub found
[ 2.358693] hub 1-0:1.0: 8 ports detected
[ 2.382894] libata version 3.00 loaded.
[ 2.389558] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.389724] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.389753] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.389804] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.389857] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
[ 2.389973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.389983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.389993] usb usb2: Product: UHCI Host Controller
[ 2.390001] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.390009] usb usb2: SerialNumber: 0000:00:10.0
[ 2.390512] usb usb2: configuration #1 chosen from 1 choice
[ 2.390715] hub 2-0:1.0: USB hub found
[ 2.390744] hub 2-0:1.0: 2 ports detected
[ 2.390915] uhci_hcd 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.390943] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.390968] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.391014] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
[ 2.391121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.391131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.391141] usb usb3: Product: UHCI Host Controller
[ 2.391149] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.391158] usb usb3: SerialNumber: 0000:00:10.1
[ 2.391563] usb usb3: configuration #1 chosen from 1 choice
[ 2.391756] hub 3-0:1.0: USB hub found
[ 2.391783] hub 3-0:1.0: 2 ports detected
[ 2.391944] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 2.391971] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.391996] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.392111] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e900
[ 2.392217] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.392227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.392237] usb usb4: Product: UHCI Host Controller
[ 2.392245] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.392253] usb usb4: SerialNumber: 0000:00:10.2
[ 2.392684] usb usb4: configuration #1 chosen from 1 choice
[ 2.392878] hub 4-0:1.0: USB hub found
[ 2.392906] hub 4-0:1.0: 2 ports detected
[ 2.393073] uhci_hcd 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 2.393101] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.393126] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.393173] uhci_hcd 0000:00:10.3: irq 10, io base 0x0000ea00
[ 2.393279] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.393289] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.393299] usb usb5: Product: UHCI Host Controller
[ 2.393308] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.393316] usb usb5: SerialNumber: 0000:00:10.3
[ 2.393729] usb usb5: configuration #1 chosen from 1 choice
[ 2.393926] hub 5-0:1.0: USB hub found
[ 2.393955] hub 5-0:1.0: 2 ports detected
[ 2.421691] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.421710] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 2.421817] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.454452] eth0: VIA Rhine II at 0x1e400, 00:e0:c5:4c:8d:54, IRQ 11.
[ 2.455180] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1.
[ 2.458740] pata_via 0000:00:0f.0: version 0.3.4
[ 2.458786] pata_via 0000:00:0f.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.458800] pata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
[ 2.466519] scsi0 : pata_via
[ 2.468972] scsi1 : pata_via
[ 2.476431] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xeb00 irq 14
[ 2.476445] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xeb08 irq 15
[ 2.644461] ata1.00: CFA: CF CARD, Ver6.04K, max UDMA/133
[ 2.644474] ata1.00: 15613920 sectors, multi 1: LBA48
[ 2.644527] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 2.652350] ata1.00: configured for UDMA/33
[ 2.652625] scsi 0:0:0:0: Direct-Access ATA CF CARD Ver6 PQ: 0 ANSI: 5
[ 2.668087] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.801493] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.801505] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.801514] usb 1-1: Product: USB2.0 Hub
[ 2.802815] usb 1-1: configuration #1 chosen from 1 choice
[ 2.803255] hub 1-1:1.0: USB hub found
[ 2.803618] hub 1-1:1.0: 4 ports detected
[ 2.861267] sd 0:0:0:0: [sda] 15613920 512-byte logical blocks: (7.99 GB/7.44 GiB)
[ 2.861389] sd 0:0:0:0: [sda] Write Protect is off
[ 2.861400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.861454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.861792] sda: sda1 sda2 < sda5 >
[ 2.866194] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.031191] PM: Starting manual resume from disk
[ 3.031205] PM: Resume from partition 8:5
[ 3.031211] PM: Checking hibernation image.
[ 3.032198] PM: Error -22 checking image file
[ 3.032205] PM: Resume from disk failed.
[ 3.092242] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[ 3.101168] kjournald starting. Commit interval 5 seconds
[ 3.101197] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.190769] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[ 3.190782] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.190793] usb 1-1.1: Product: FT232R USB UART
[ 3.190801] usb 1-1.1: Manufacturer: FTDI
[ 3.190808] usb 1-1.1: SerialNumber: A4008VDb
[ 3.191114] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.268411] usb 1-1.2: new full speed USB device using ehci_hcd and address 4
[ 3.366400] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[ 3.366414] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.366425] usb 1-1.2: Product: FT232R USB UART
[ 3.366433] usb 1-1.2: Manufacturer: FTDI
[ 3.366440] usb 1-1.2: SerialNumber: A400ZFD3
[ 3.366737] usb 1-1.2: configuration #1 chosen from 1 choice
[ 3.440453] usb 1-1.3: new full speed USB device using ehci_hcd and address 5
[ 3.541463] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[ 3.541477] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.541487] usb 1-1.3: Product: FT232R USB UART
[ 3.541495] usb 1-1.3: Manufacturer: FTDI
[ 3.541502] usb 1-1.3: SerialNumber: A4008VqB
[ 3.541799] usb 1-1.3: configuration #1 chosen from 1 choice
[ 3.616382] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
[ 3.709494] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
[ 3.709507] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.709518] usb 1-1.4: Product: USB2.0 Hub
[ 3.709797] usb 1-1.4: configuration #1 chosen from 1 choice
[ 3.710249] hub 1-1.4:1.0: USB hub found
[ 3.710612] hub 1-1.4:1.0: 4 ports detected
[ 3.750249] udev[276]: starting version 164
[ 3.984484] usb 1-1.4.1: new full speed USB device using ehci_hcd and address 7
[ 4.087132] usb 1-1.4.1: New USB device found, idVendor=0403, idProduct=6001
[ 4.087146] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.087156] usb 1-1.4.1: Product: FT232R USB UART
[ 4.087164] usb 1-1.4.1: Manufacturer: FTDI
[ 4.087172] usb 1-1.4.1: SerialNumber: A400ZGDE
[ 4.087471] usb 1-1.4.1: configuration #1 chosen from 1 choice
[ 4.160416] usb 1-1.4.3: new full speed USB device using ehci_hcd and address 8
[ 4.259321] usb 1-1.4.3: New USB device found, idVendor=0403, idProduct=6001
[ 4.259335] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.259346] usb 1-1.4.3: Product: FT232R USB UART
[ 4.259354] usb 1-1.4.3: Manufacturer: FTDI
[ 4.259361] usb 1-1.4.3: SerialNumber: A500CMTR
[ 4.259674] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 4.366154] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.803825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.803851] ACPI: Power Button [PWRB]
[ 4.804715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.804740] ACPI: Power Button [PWRF]
[ 4.864979] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.867147] Marking TSC unstable due to TSC halts in idle
[ 4.875170] processor LNXCPU:00: registered as cooling_device0
[ 4.884129] Switching to clocksource acpi_pm
[ 4.952609] usbcore: registered new interface driver usbserial
[ 4.953303] USB Serial support registered for generic
[ 4.954998] usbcore: registered new interface driver usbserial_generic
[ 4.955012] usbserial: USB Serial Driver core
[ 4.974642] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.007626] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.007696] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.022426] USB Serial support registered for FTDI USB Serial Device
[ 5.023410] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[ 5.023635] usb 1-1.1: Detected FT232RL
[ 5.023643] usb 1-1.1: Number of endpoints 2
[ 5.023652] usb 1-1.1: Endpoint 1 MaxPacketSize 64
[ 5.023660] usb 1-1.1: Endpoint 2 MaxPacketSize 64
[ 5.023668] usb 1-1.1: Setting MaxPacketSize 64
[ 5.024799] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.024859] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 5.029285] usb 1-1.2: Detected FT232RL
[ 5.029296] usb 1-1.2: Number of endpoints 2
[ 5.029305] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 5.029313] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 5.029321] usb 1-1.2: Setting MaxPacketSize 64
[ 5.031143] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 5.031217] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 5.032534] usb 1-1.3: Detected FT232RL
[ 5.032546] usb 1-1.3: Number of endpoints 2
[ 5.032555] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 5.032563] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 5.032571] usb 1-1.3: Setting MaxPacketSize 64
[ 5.036429] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB2
[ 5.036537] ftdi_sio 1-1.4.1:1.0: FTDI USB Serial Device converter detected
[ 5.038028] usb 1-1.4.1: Detected FT232RL
[ 5.038040] usb 1-1.4.1: Number of endpoints 2
[ 5.038048] usb 1-1.4.1: Endpoint 1 MaxPacketSize 64
[ 5.038057] usb 1-1.4.1: Endpoint 2 MaxPacketSize 64
[ 5.038065] usb 1-1.4.1: Setting MaxPacketSize 64
[ 5.040945] usb 1-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB3
[ 5.042028] ftdi_sio 1-1.4.3:1.0: FTDI USB Serial Device converter detected
[ 5.043622] usb 1-1.4.3: Detected FT232RL
[ 5.043635] usb 1-1.4.3: Number of endpoints 2
[ 5.043643] usb 1-1.4.3: Endpoint 1 MaxPacketSize 64
[ 5.043652] usb 1-1.4.3: Endpoint 2 MaxPacketSize 64
[ 5.043660] usb 1-1.4.3: Setting MaxPacketSize 64
[ 5.076805] usb 1-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB4
[ 5.077982] usbcore: registered new interface driver ftdi_sio
[ 5.077993] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 5.377103] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.449970] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 5.450138] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 6.619807] Adding 368632k swap on /dev/sda5. Priority:-1 extents:1 across:368632k
[ 17.024240] EXT3 FS on sda1, internal journal
[ 17.193121] loop: module loaded
[ 17.309953] w83627hf: Found W83697HF chip at 0x290
[ 17.914395] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

syslog vom Server

Oct 23 10:15:38 Server kernel: imklog 4.6.4, log source = /proc/kmsg started.
Oct 23 10:15:38 Server rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="985" x-info="http://www.rsyslog.com"] (re)start
Oct 23 10:15:38 Server kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 23 10:15:38 Server kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 23 10:15:38 Server kernel: [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
Oct 23 10:15:38 Server kernel: [ 0.000000] KERNEL supported cpus:
Oct 23 10:15:38 Server kernel: [ 0.000000] Intel GenuineIntel
Oct 23 10:15:38 Server kernel: [ 0.000000] AMD AuthenticAMD
Oct 23 10:15:38 Server kernel: [ 0.000000] NSC Geode by NSC
Oct 23 10:15:38 Server kernel: [ 0.000000] Cyrix CyrixInstead
Oct 23 10:15:38 Server kernel: [ 0.000000] Centaur CentaurHauls
Oct 23 10:15:38 Server kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 23 10:15:38 Server kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 23 10:15:38 Server kernel: [ 0.000000] UMC UMC UMC UMC
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
Oct 23 10:15:38 Server kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 23 10:15:38 Server kernel: [ 0.000000] DMI 2.3 present.
Oct 23 10:15:38 Server kernel: [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Oct 23 10:15:38 Server kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 23 10:15:38 Server kernel: [ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000
Oct 23 10:15:38 Server kernel: [ 0.000000] MTRR default type: uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] MTRR fixed ranges enabled:
Oct 23 10:15:38 Server kernel: [ 0.000000] 00000-9FFFF write-back
Oct 23 10:15:38 Server kernel: [ 0.000000] A0000-BFFFF uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] C0000-CCFFF write-protect
Oct 23 10:15:38 Server kernel: [ 0.000000] CD000-EFFFF uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] F0000-F7FFF write-through
Oct 23 10:15:38 Server kernel: [ 0.000000] F8000-F8FFF uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] F9000-FFFFF write-through
Oct 23 10:15:38 Server kernel: [ 0.000000] MTRR variable ranges enabled:
Oct 23 10:15:38 Server kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back
Oct 23 10:15:38 Server kernel: [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
Oct 23 10:15:38 Server kernel: [ 0.000000] 3 base 03F700000 mask FFFF00000 uncachable
Oct 23 10:15:38 Server kernel: [ 0.000000] 4 disabled
Oct 23 10:15:38 Server kernel: [ 0.000000] 5 disabled
Oct 23 10:15:38 Server kernel: [ 0.000000] 6 disabled
Oct 23 10:15:38 Server kernel: [ 0.000000] 7 disabled
Oct 23 10:15:38 Server kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 23 10:15:38 Server kernel: [ 0.000000] initial memory mapped : 0 - 01800000
Oct 23 10:15:38 Server kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
Oct 23 10:15:38 Server kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Oct 23 10:15:38 Server kernel: [ 0.000000] 0000400000 - 0037000000 page 2M
Oct 23 10:15:38 Server kernel: [ 0.000000] 0037000000 - 00373fe000 page 4k
Oct 23 10:15:38 Server kernel: [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
Oct 23 10:15:38 Server kernel: [ 0.000000] RAMDISK: 2f11f000 - 2f967354
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: RSDP 000f4fd0 00014 (v00 CN700 )
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: RSDT 3f6e3040 00028 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: FACP 3f6e30c0 00074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: DSDT 3f6e3180 0454D (v01 CN700 AWRDACPI 00001000 MSFT 0100000E)
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: FACS 3f6e0000 00040
Oct 23 10:15:38 Server kernel: [ 0.000000] 130MB HIGHMEM available.
Oct 23 10:15:38 Server kernel: [ 0.000000] 883MB LOWMEM available.
Oct 23 10:15:38 Server kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Oct 23 10:15:38 Server kernel: [ 0.000000] low ram: 0 - 373fe000
Oct 23 10:15:38 Server kernel: [ 0.000000] node 0 low ram: 00000000 - 373fe000
Oct 23 10:15:38 Server kernel: [ 0.000000] node 0 bootmap 00012000 - 00018e80
Oct 23 10:15:38 Server kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #3 [0001000000 - 00014ccd0c] TEXT DATA BSS ==> [0001000000 - 00014ccd0c]
Oct 23 10:15:38 Server kernel: [ 0.000000] #4 [002f11f000 - 002f967354] RAMDISK ==> [002f11f000 - 002f967354]
Oct 23 10:15:38 Server kernel: [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #6 [00014cd000 - 00014d30b2] BRK ==> [00014cd000 - 00014d30b2]
Oct 23 10:15:38 Server kernel: [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
Oct 23 10:15:38 Server kernel: [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Oct 23 10:15:38 Server kernel: [ 0.000000] Zone PFN ranges:
Oct 23 10:15:38 Server kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Oct 23 10:15:38 Server kernel: [ 0.000000] Normal 0x00001000 -> 0x000373fe
Oct 23 10:15:38 Server kernel: [ 0.000000] HighMem 0x000373fe -> 0x0003f6e0
Oct 23 10:15:38 Server kernel: [ 0.000000] Movable zone start PFN for each node
Oct 23 10:15:38 Server kernel: [ 0.000000] early_node_map[2] active PFN ranges
Oct 23 10:15:38 Server kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Oct 23 10:15:38 Server kernel: [ 0.000000] 0: 0x00000100 -> 0x0003f6e0
Oct 23 10:15:38 Server kernel: [ 0.000000] On node 0 totalpages: 259695
Oct 23 10:15:38 Server kernel: [ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
Oct 23 10:15:38 Server kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Oct 23 10:15:38 Server kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 23 10:15:38 Server kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
Oct 23 10:15:38 Server kernel: [ 0.000000] Normal zone: 1736 pages used for memmap
Oct 23 10:15:38 Server kernel: [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
Oct 23 10:15:38 Server kernel: [ 0.000000] HighMem zone: 262 pages used for memmap
Oct 23 10:15:38 Server kernel: [ 0.000000] HighMem zone: 33244 pages, LIFO batch:7
Oct 23 10:15:38 Server kernel: [ 0.000000] Using APIC driver default
Oct 23 10:15:38 Server kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Oct 23 10:15:38 Server kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
Oct 23 10:15:38 Server kernel: [ 0.000000] No local APIC present or hardware disabled
Oct 23 10:15:38 Server kernel: [ 0.000000] APIC: disable apic facility
Oct 23 10:15:38 Server kernel: [ 0.000000] nr_irqs_gsi: 16
Oct 23 10:15:38 Server kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 23 10:15:38 Server kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 23 10:15:38 Server kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 23 10:15:38 Server kernel: [ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:c08f0000)
Oct 23 10:15:38 Server kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Oct 23 10:15:38 Server kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
Oct 23 10:15:38 Server kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304
Oct 23 10:15:38 Server kernel: [ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
Oct 23 10:15:38 Server kernel: [ 0.000000] pcpu-alloc: [0] 0
Oct 23 10:15:38 Server kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
Oct 23 10:15:38 Server kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=def49fda-bbd0-4ea1-802a-d03caf0286a4 ro quiet
Oct 23 10:15:38 Server kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Oct 23 10:15:38 Server kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 23 10:15:38 Server kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 23 10:15:38 Server kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 23 10:15:38 Server kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 23 10:15:38 Server kernel: [ 0.000000] Initializing CPU#0
Oct 23 10:15:38 Server kernel: [ 0.000000] Initializing HighMem for node 0 (000373fe:0003f6e0)
Oct 23 10:15:38 Server kernel: [ 0.000000] Memory: 1015696k/1039232k available (2506k kernel code, 22456k reserved, 1326k data, 380k init, 134024k highmem)
Oct 23 10:15:38 Server kernel: [ 0.000000] virtual kernel memory layout:
Oct 23 10:15:38 Server kernel: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
Oct 23 10:15:38 Server kernel: [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
Oct 23 10:15:38 Server kernel: [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Oct 23 10:15:38 Server kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Oct 23 10:15:38 Server kernel: [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
Oct 23 10:15:38 Server kernel: [ 0.000000] .data : 0xc1272b9b - 0xc13be4c4 (1326 kB)
Oct 23 10:15:38 Server kernel: [ 0.000000] .text : 0xc1000000 - 0xc1272b9b (2506 kB)
Oct 23 10:15:38 Server kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 23 10:15:38 Server kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Oct 23 10:15:38 Server kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 23 10:15:38 Server kernel: [ 0.000000] NR_IRQS:1280
Oct 23 10:15:38 Server kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 23 10:15:38 Server kernel: [ 0.000000] console [tty0] enabled
Oct 23 10:15:38 Server kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 23 10:15:38 Server kernel: [ 0.000000] Detected 997.351 MHz processor.
Oct 23 10:15:38 Server kernel: [ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.70 BogoMIPS (lpj=3989404)
Oct 23 10:15:38 Server kernel: [ 0.008061] Security Framework initialized
Oct 23 10:15:38 Server kernel: [ 0.008076] SELinux: Disabled at boot.
Oct 23 10:15:38 Server kernel: [ 0.008095] Mount-cache hash table entries: 512
Oct 23 10:15:38 Server kernel: [ 0.008366] Initializing cgroup subsys ns
Oct 23 10:15:38 Server kernel: [ 0.008376] Initializing cgroup subsys cpuacct
Oct 23 10:15:38 Server kernel: [ 0.008388] Initializing cgroup subsys devices
Oct 23 10:15:38 Server kernel: [ 0.008396] Initializing cgroup subsys freezer
Oct 23 10:15:38 Server kernel: [ 0.008404] Initializing cgroup subsys net_cls
Oct 23 10:15:38 Server kernel: [ 0.008454] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 23 10:15:38 Server kernel: [ 0.008463] CPU: L2 Cache: 128K (64 bytes/line)
Oct 23 10:15:38 Server kernel: [ 0.008487] Performance Events:
Oct 23 10:15:38 Server kernel: [ 0.008497] Checking 'hlt' instruction... OK.
Oct 23 10:15:38 Server kernel: [ 0.024742] SMP alternatives: switching to UP code
Oct 23 10:15:38 Server kernel: [ 0.037949] Freeing SMP alternatives: 13k freed
Oct 23 10:15:38 Server kernel: [ 0.037985] ACPI: Core revision 20090903
Oct 23 10:15:38 Server kernel: [ 0.049007] ACPI: setting ELCR to 0200 (from 0e20)
Oct 23 10:15:38 Server kernel: [ 0.050575] Enabling APIC mode: Flat. Using 0 I/O APICs
Oct 23 10:15:38 Server kernel: [ 0.050583] weird, boot CPU (#0) not listed by the BIOS.
Oct 23 10:15:38 Server kernel: [ 0.050590] SMP motherboard not detected.
Oct 23 10:15:38 Server kernel: [ 0.050597] Local APIC not detected. Using dummy APIC emulation.
Oct 23 10:15:38 Server kernel: [ 0.050604] SMP disabled
Oct 23 10:15:38 Server kernel: [ 0.050907] Brought up 1 CPUs
Oct 23 10:15:38 Server kernel: [ 0.050916] Total of 1 processors activated (1994.70 BogoMIPS).
Oct 23 10:15:38 Server kernel: [ 0.050943] CPU0 attaching NULL sched-domain.
Oct 23 10:15:38 Server kernel: [ 0.051219] devtmpfs: initialized
Oct 23 10:15:38 Server kernel: [ 0.052548] regulator: core version 0.5
Oct 23 10:15:38 Server kernel: [ 0.052691] NET: Registered protocol family 16
Oct 23 10:15:38 Server kernel: [ 0.052917] ACPI: bus type pci registered
Oct 23 10:15:38 Server kernel: [ 0.061280] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=1
Oct 23 10:15:38 Server kernel: [ 0.061288] PCI: Using configuration type 1 for base access
Oct 23 10:15:38 Server kernel: [ 0.062362] bio: create slab <bio-0> at 0
Oct 23 10:15:38 Server kernel: [ 0.063781] ACPI: EC: Look up EC in DSDT
Oct 23 10:15:38 Server kernel: [ 0.078261] ACPI: Interpreter enabled
Oct 23 10:15:38 Server kernel: [ 0.078274] ACPI: (supports S0 S1 S4 S5)
Oct 23 10:15:38 Server kernel: [ 0.078343] ACPI: Using PIC for interrupt routing
Oct 23 10:15:38 Server kernel: [ 0.090822] ACPI: No dock devices found.
Oct 23 10:15:38 Server kernel: [ 0.091187] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 23 10:15:38 Server kernel: [ 0.091297] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
Oct 23 10:15:38 Server kernel: [ 0.091784] pci 0000:00:01.0: supports D1
Oct 23 10:15:38 Server kernel: [ 0.091881] pci 0000:00:0f.0: reg 20 io port: [0xeb00-0xeb0f]
Oct 23 10:15:38 Server kernel: [ 0.092028] pci 0000:00:10.0: reg 20 io port: [0xec00-0xec1f]
Oct 23 10:15:38 Server kernel: [ 0.092080] pci 0000:00:10.0: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.092089] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.092101] pci 0000:00:10.0: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.092175] pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f]
Oct 23 10:15:38 Server kernel: [ 0.092227] pci 0000:00:10.1: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.092235] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.092246] pci 0000:00:10.1: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.092320] pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f]
Oct 23 10:15:38 Server kernel: [ 0.092371] pci 0000:00:10.2: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.092380] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.092391] pci 0000:00:10.2: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.092465] pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f]
Oct 23 10:15:38 Server kernel: [ 0.092516] pci 0000:00:10.3: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.092525] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.092536] pci 0000:00:10.3: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.092588] pci 0000:00:10.4: reg 10 32bit mmio: [0xf6000000-0xf60000ff]
Oct 23 10:15:38 Server kernel: [ 0.092662] pci 0000:00:10.4: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.092671] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.092682] pci 0000:00:10.4: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.092774] HPET not enabled in BIOS. You might try hpet=force boot option
Oct 23 10:15:38 Server kernel: [ 0.092873] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
Oct 23 10:15:38 Server kernel: [ 0.092949] pci 0000:00:11.5: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.093006] pci 0000:00:12.0: reg 10 io port: [0xe400-0xe4ff]
Oct 23 10:15:38 Server kernel: [ 0.093023] pci 0000:00:12.0: reg 14 32bit mmio: [0xf6001000-0xf60010ff]
Oct 23 10:15:38 Server kernel: [ 0.093093] pci 0000:00:12.0: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.093101] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 23 10:15:38 Server kernel: [ 0.093112] pci 0000:00:12.0: PME# disabled
Oct 23 10:15:38 Server kernel: [ 0.093199] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
Oct 23 10:15:38 Server kernel: [ 0.093215] pci 0000:01:00.0: reg 14 32bit mmio: [0xf4000000-0xf4ffffff]
Oct 23 10:15:38 Server kernel: [ 0.093248] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
Oct 23 10:15:38 Server kernel: [ 0.093292] pci 0000:01:00.0: supports D1 D2
Oct 23 10:15:38 Server kernel: [ 0.093359] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
Oct 23 10:15:38 Server kernel: [ 0.093372] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff]
Oct 23 10:15:38 Server kernel: [ 0.093390] pci_bus 0000:00: on NUMA node 0
Oct 23 10:15:38 Server kernel: [ 0.093405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 23 10:15:38 Server kernel: [ 0.182232] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
Oct 23 10:15:38 Server kernel: [ 0.182661] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
Oct 23 10:15:38 Server kernel: [ 0.183096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
Oct 23 10:15:38 Server kernel: [ 0.183471] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 23 10:15:38 Server kernel: [ 0.183836] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 23 10:15:38 Server kernel: [ 0.184204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 23 10:15:38 Server kernel: [ 0.184558] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 23 10:15:38 Server kernel: [ 0.184904] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 23 10:15:38 Server kernel: [ 0.185200] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 23 10:15:38 Server kernel: [ 0.185209] vgaarb: loaded
Oct 23 10:15:38 Server kernel: [ 0.185414] PCI: Using ACPI for IRQ routing
Oct 23 10:15:38 Server kernel: [ 0.185797] Switching to clocksource tsc
Oct 23 10:15:38 Server kernel: [ 0.188001] pnp: PnP ACPI init
Oct 23 10:15:38 Server kernel: [ 0.188001] ACPI: bus type pnp registered
Oct 23 10:15:38 Server kernel: [ 0.196192] pnp: PnP ACPI: found 11 devices
Oct 23 10:15:38 Server kernel: [ 0.196200] ACPI: ACPI bus type pnp unregistered
Oct 23 10:15:38 Server kernel: [ 0.196211] PnPBIOS: Disabled by ACPI PNP
Oct 23 10:15:38 Server kernel: [ 0.196244] system 00:00: iomem range 0xcda00-0xcffff has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196257] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196269] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196281] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196294] system 00:00: iomem range 0x3f6e0000-0x3f6fffff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196307] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196319] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196332] system 00:00: iomem range 0x100000-0x3f6dffff could not be reserved
Oct 23 10:15:38 Server kernel: [ 0.196344] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196357] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196379] system 00:02: ioport range 0x400-0x47f has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196390] system 00:02: ioport range 0x500-0x50f has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196410] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Oct 23 10:15:38 Server kernel: [ 0.196421] system 00:03: ioport range 0x294-0x297 has been reserved
Oct 23 10:15:38 Server kernel: [ 0.231564] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 23 10:15:38 Server kernel: [ 0.231573] pci 0000:00:01.0: IO window: disabled
Oct 23 10:15:38 Server kernel: [ 0.231587] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff
Oct 23 10:15:38 Server kernel: [ 0.231600] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf3ffffff
Oct 23 10:15:38 Server kernel: [ 0.231630] pci 0000:00:01.0: setting latency timer to 64
Oct 23 10:15:38 Server kernel: [ 0.231645] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Oct 23 10:15:38 Server kernel: [ 0.231655] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Oct 23 10:15:38 Server kernel: [ 0.231666] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff]
Oct 23 10:15:38 Server kernel: [ 0.231677] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf3ffffff]
Oct 23 10:15:38 Server kernel: [ 0.231781] NET: Registered protocol family 2
Oct 23 10:15:38 Server kernel: [ 0.232062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 23 10:15:38 Server kernel: [ 0.233131] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 23 10:15:38 Server kernel: [ 0.235572] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 23 10:15:38 Server kernel: [ 0.236820] TCP: Hash tables configured (established 131072 bind 65536)
Oct 23 10:15:38 Server kernel: [ 0.236830] TCP reno registered
Oct 23 10:15:38 Server kernel: [ 0.237082] NET: Registered protocol family 1
Oct 23 10:15:38 Server kernel: [ 0.237160] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Oct 23 10:15:38 Server kernel: [ 0.238273] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Oct 23 10:15:38 Server kernel: [ 0.238282] PCI: setting IRQ 11 as level-triggered
Oct 23 10:15:38 Server kernel: [ 0.238298] pci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 0.238330] pci 0000:00:10.0: PCI INT A disabled
Oct 23 10:15:38 Server kernel: [ 0.238356] pci 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 0.238383] pci 0000:00:10.1: PCI INT A disabled
Oct 23 10:15:38 Server kernel: [ 0.239246] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 23 10:15:38 Server kernel: [ 0.239254] PCI: setting IRQ 10 as level-triggered
Oct 23 10:15:38 Server kernel: [ 0.239268] pci 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 0.239281] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10
Oct 23 10:15:38 Server kernel: [ 0.239322] pci 0000:00:10.2: PCI INT B disabled
Oct 23 10:15:38 Server kernel: [ 0.239348] pci 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 0.239359] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10
Oct 23 10:15:38 Server kernel: [ 0.239399] pci 0000:00:10.3: PCI INT B disabled
Oct 23 10:15:38 Server kernel: [ 0.240282] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Oct 23 10:15:38 Server kernel: [ 0.240294] pci 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 0.240341] pci 0000:00:10.4: PCI INT C disabled
Oct 23 10:15:38 Server kernel: [ 0.240354] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
Oct 23 10:15:38 Server kernel: [ 0.240380] pci 0000:01:00.0: Boot video device
Oct 23 10:15:38 Server kernel: [ 0.240509] Unpacking initramfs...
Oct 23 10:15:38 Server kernel: [ 1.107199] Freeing initrd memory: 8480k freed
Oct 23 10:15:38 Server kernel: [ 1.122669] audit: initializing netlink socket (disabled)
Oct 23 10:15:38 Server kernel: [ 1.122700] type=2000 audit(1350980120.120:1): initialized
Oct 23 10:15:38 Server kernel: [ 1.134472] highmem bounce pool size: 64 pages
Oct 23 10:15:38 Server kernel: [ 1.134488] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Oct 23 10:15:38 Server kernel: [ 1.139207] VFS: Disk quotas dquot_6.5.2
Oct 23 10:15:38 Server kernel: [ 1.139410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 23 10:15:38 Server kernel: [ 1.139621] msgmni has been set to 1739
Oct 23 10:15:38 Server kernel: [ 1.140216] alg: No test for stdrng (krng)
Oct 23 10:15:38 Server kernel: [ 1.140413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 23 10:15:38 Server kernel: [ 1.140423] io scheduler noop registered
Oct 23 10:15:38 Server kernel: [ 1.140431] io scheduler anticipatory registered
Oct 23 10:15:38 Server kernel: [ 1.140438] io scheduler deadline registered
Oct 23 10:15:38 Server kernel: [ 1.140551] io scheduler cfq registered (default)
Oct 23 10:15:38 Server kernel: [ 1.141014] isapnp: Scanning for PnP cards...
Oct 23 10:15:38 Server kernel: [ 1.495198] isapnp: No Plug & Play device found
Oct 23 10:15:38 Server kernel: [ 1.498935] Linux agpgart interface v0.103
Oct 23 10:15:38 Server kernel: [ 1.499277] agpgart: Detected VIA VT3314 chipset
Oct 23 10:15:38 Server kernel: [ 1.509694] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Oct 23 10:15:38 Server kernel: [ 1.509784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 23 10:15:38 Server kernel: [ 1.509943] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 23 10:15:38 Server kernel: [ 1.510137] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 23 10:15:38 Server kernel: [ 1.510758] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 23 10:15:38 Server kernel: [ 1.511011] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 23 10:15:38 Server kernel: [ 1.511400] PNP: No PS/2 controller found. Probing ports directly.
Oct 23 10:15:38 Server kernel: [ 1.511879] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 23 10:15:38 Server kernel: [ 1.511901] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 23 10:15:38 Server kernel: [ 1.512225] mice: PS/2 mouse device common for all mice
Oct 23 10:15:38 Server kernel: [ 1.512344] rtc_cmos 00:05: RTC can wake from S4
Oct 23 10:15:38 Server kernel: [ 1.512459] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Oct 23 10:15:38 Server kernel: [ 1.512501] rtc0: alarms up to one year, y3k, 242 bytes nvram
Oct 23 10:15:38 Server kernel: [ 1.512532] cpuidle: using governor ladder
Oct 23 10:15:38 Server kernel: [ 1.512539] cpuidle: using governor menu
Oct 23 10:15:38 Server kernel: [ 1.512551] No iBFT detected.
Oct 23 10:15:38 Server kernel: [ 1.513896] TCP cubic registered
Oct 23 10:15:38 Server kernel: [ 1.514392] NET: Registered protocol family 10
Oct 23 10:15:38 Server kernel: [ 1.517021] Mobile IPv6
Oct 23 10:15:38 Server kernel: [ 1.517030] NET: Registered protocol family 17
Oct 23 10:15:38 Server kernel: [ 1.517078] Using IPI No-Shortcut mode
Oct 23 10:15:38 Server kernel: [ 1.517310] PM: Resume from disk failed.
Oct 23 10:15:38 Server kernel: [ 1.517338] registered taskstats version 1
Oct 23 10:15:38 Server kernel: [ 1.517968] rtc_cmos 00:05: setting system clock to 2012-10-23 08:15:20 UTC (1350980120)
Oct 23 10:15:38 Server kernel: [ 1.518156] Initalizing network drop monitor service
Oct 23 10:15:38 Server kernel: [ 1.518231] Freeing unused kernel memory: 380k freed
Oct 23 10:15:38 Server kernel: [ 1.519079] Write protecting the kernel text: 2508k
Oct 23 10:15:38 Server kernel: [ 1.519161] Write protecting the kernel read-only data: 920k
Oct 23 10:15:38 Server kernel: [ 1.596399] udev[46]: starting version 164
Oct 23 10:15:38 Server kernel: [ 2.210216] SCSI subsystem initialized
Oct 23 10:15:38 Server kernel: [ 2.258939] usbcore: registered new interface driver usbfs
Oct 23 10:15:38 Server kernel: [ 2.259972] usbcore: registered new interface driver hub
Oct 23 10:15:38 Server kernel: [ 2.260655] usbcore: registered new device driver usb
Oct 23 10:15:38 Server kernel: [ 2.281466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 23 10:15:38 Server kernel: [ 2.281559] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 2.281613] ehci_hcd 0000:00:10.4: EHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.281694] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Oct 23 10:15:38 Server kernel: [ 2.281786] ehci_hcd 0000:00:10.4: irq 10, io mem 0xf6000000
Oct 23 10:15:38 Server kernel: [ 2.358150] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
Oct 23 10:15:38 Server kernel: [ 2.358251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 23 10:15:38 Server kernel: [ 2.358262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 23 10:15:38 Server kernel: [ 2.358272] usb usb1: Product: EHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.358281] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Oct 23 10:15:38 Server kernel: [ 2.358289] usb usb1: SerialNumber: 0000:00:10.4
Oct 23 10:15:38 Server kernel: [ 2.358566] usb usb1: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.358666] hub 1-0:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.358693] hub 1-0:1.0: 8 ports detected
Oct 23 10:15:38 Server kernel: [ 2.382894] libata version 3.00 loaded.
Oct 23 10:15:38 Server kernel: [ 2.389558] uhci_hcd: USB Universal Host Controller Interface driver
Oct 23 10:15:38 Server kernel: [ 2.389724] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 2.389753] uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.389804] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Oct 23 10:15:38 Server kernel: [ 2.389857] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000ec00
Oct 23 10:15:38 Server kernel: [ 2.389973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Oct 23 10:15:38 Server kernel: [ 2.389983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 23 10:15:38 Server kernel: [ 2.389993] usb usb2: Product: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.390001] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 23 10:15:38 Server kernel: [ 2.390009] usb usb2: SerialNumber: 0000:00:10.0
Oct 23 10:15:38 Server kernel: [ 2.390512] usb usb2: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.390715] hub 2-0:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.390744] hub 2-0:1.0: 2 ports detected
Oct 23 10:15:38 Server kernel: [ 2.390915] uhci_hcd 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 2.390943] uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.390968] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Oct 23 10:15:38 Server kernel: [ 2.391014] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e800
Oct 23 10:15:38 Server kernel: [ 2.391121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Oct 23 10:15:38 Server kernel: [ 2.391131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 23 10:15:38 Server kernel: [ 2.391141] usb usb3: Product: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.391149] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 23 10:15:38 Server kernel: [ 2.391158] usb usb3: SerialNumber: 0000:00:10.1
Oct 23 10:15:38 Server kernel: [ 2.391563] usb usb3: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.391756] hub 3-0:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.391783] hub 3-0:1.0: 2 ports detected
Oct 23 10:15:38 Server kernel: [ 2.391944] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 2.391971] uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.391996] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Oct 23 10:15:38 Server kernel: [ 2.392111] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000e900
Oct 23 10:15:38 Server kernel: [ 2.392217] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Oct 23 10:15:38 Server kernel: [ 2.392227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 23 10:15:38 Server kernel: [ 2.392237] usb usb4: Product: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.392245] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 23 10:15:38 Server kernel: [ 2.392253] usb usb4: SerialNumber: 0000:00:10.2
Oct 23 10:15:38 Server kernel: [ 2.392684] usb usb4: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.392878] hub 4-0:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.392906] hub 4-0:1.0: 2 ports detected
Oct 23 10:15:38 Server kernel: [ 2.393073] uhci_hcd 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 2.393101] uhci_hcd 0000:00:10.3: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.393126] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Oct 23 10:15:38 Server kernel: [ 2.393173] uhci_hcd 0000:00:10.3: irq 10, io base 0x0000ea00
Oct 23 10:15:38 Server kernel: [ 2.393279] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Oct 23 10:15:38 Server kernel: [ 2.393289] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 23 10:15:38 Server kernel: [ 2.393299] usb usb5: Product: UHCI Host Controller
Oct 23 10:15:38 Server kernel: [ 2.393308] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 23 10:15:38 Server kernel: [ 2.393316] usb usb5: SerialNumber: 0000:00:10.3
Oct 23 10:15:38 Server kernel: [ 2.393729] usb usb5: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.393926] hub 5-0:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.393955] hub 5-0:1.0: 2 ports detected
Oct 23 10:15:38 Server kernel: [ 2.421691] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 23 10:15:38 Server kernel: [ 2.421710] via-rhine: Broken BIOS detected, avoid_D3 enabled.
Oct 23 10:15:38 Server kernel: [ 2.421817] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 2.454452] eth0: VIA Rhine II at 0x1e400, 00:e0:c5:4c:8d:54, IRQ 11.
Oct 23 10:15:38 Server kernel: [ 2.455180] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1.
Oct 23 10:15:38 Server kernel: [ 2.458740] pata_via 0000:00:0f.0: version 0.3.4
Oct 23 10:15:38 Server kernel: [ 2.458786] pata_via 0000:00:0f.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Oct 23 10:15:38 Server kernel: [ 2.458800] pata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
Oct 23 10:15:38 Server kernel: [ 2.466519] scsi0 : pata_via
Oct 23 10:15:38 Server kernel: [ 2.468972] scsi1 : pata_via
Oct 23 10:15:38 Server kernel: [ 2.476431] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xeb00 irq 14
Oct 23 10:15:38 Server kernel: [ 2.476445] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xeb08 irq 15
Oct 23 10:15:38 Server kernel: [ 2.644461] ata1.00: CFA: CF CARD, Ver6.04K, max UDMA/133
Oct 23 10:15:38 Server kernel: [ 2.644474] ata1.00: 15613920 sectors, multi 1: LBA48
Oct 23 10:15:38 Server kernel: [ 2.644527] ata1.00: limited to UDMA/33 due to 40-wire cable
Oct 23 10:15:38 Server kernel: [ 2.652350] ata1.00: configured for UDMA/33
Oct 23 10:15:38 Server kernel: [ 2.652625] scsi 0:0:0:0: Direct-Access ATA CF CARD Ver6 PQ: 0 ANSI: 5
Oct 23 10:15:38 Server kernel: [ 2.668087] usb 1-1: new high speed USB device using ehci_hcd and address 2
Oct 23 10:15:38 Server kernel: [ 2.801493] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Oct 23 10:15:38 Server kernel: [ 2.801505] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 23 10:15:38 Server kernel: [ 2.801514] usb 1-1: Product: USB2.0 Hub
Oct 23 10:15:38 Server kernel: [ 2.802815] usb 1-1: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 2.803255] hub 1-1:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 2.803618] hub 1-1:1.0: 4 ports detected
Oct 23 10:15:38 Server kernel: [ 2.861267] sd 0:0:0:0: [sda] 15613920 512-byte logical blocks: (7.99 GB/7.44 GiB)
Oct 23 10:15:38 Server kernel: [ 2.861389] sd 0:0:0:0: [sda] Write Protect is off
Oct 23 10:15:38 Server kernel: [ 2.861400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 23 10:15:38 Server kernel: [ 2.861454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 23 10:15:38 Server kernel: [ 2.861792] sda: sda1 sda2 < sda5 >
Oct 23 10:15:38 Server kernel: [ 2.866194] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 23 10:15:38 Server kernel: [ 3.031191] PM: Starting manual resume from disk
Oct 23 10:15:38 Server kernel: [ 3.031205] PM: Resume from partition 8:5
Oct 23 10:15:38 Server kernel: [ 3.031211] PM: Checking hibernation image.
Oct 23 10:15:38 Server kernel: [ 3.032198] PM: Error -22 checking image file
Oct 23 10:15:38 Server kernel: [ 3.032205] PM: Resume from disk failed.
Oct 23 10:15:38 Server kernel: [ 3.092242] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
Oct 23 10:15:38 Server kernel: [ 3.101168] kjournald starting. Commit interval 5 seconds
Oct 23 10:15:38 Server kernel: [ 3.101197] EXT3-fs: mounted filesystem with ordered data mode.
Oct 23 10:15:38 Server kernel: [ 3.190769] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:15:38 Server kernel: [ 3.190782] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:15:38 Server kernel: [ 3.190793] usb 1-1.1: Product: FT232R USB UART
Oct 23 10:15:38 Server kernel: [ 3.190801] usb 1-1.1: Manufacturer: FTDI
Oct 23 10:15:38 Server kernel: [ 3.190808] usb 1-1.1: SerialNumber: A4008VDb
Oct 23 10:15:38 Server kernel: [ 3.191114] usb 1-1.1: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 3.268411] usb 1-1.2: new full speed USB device using ehci_hcd and address 4
Oct 23 10:15:38 Server kernel: [ 3.366400] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:15:38 Server kernel: [ 3.366414] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:15:38 Server kernel: [ 3.366425] usb 1-1.2: Product: FT232R USB UART
Oct 23 10:15:38 Server kernel: [ 3.366433] usb 1-1.2: Manufacturer: FTDI
Oct 23 10:15:38 Server kernel: [ 3.366440] usb 1-1.2: SerialNumber: A400ZFD3
Oct 23 10:15:38 Server kernel: [ 3.366737] usb 1-1.2: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 3.440453] usb 1-1.3: new full speed USB device using ehci_hcd and address 5
Oct 23 10:15:38 Server kernel: [ 3.541463] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:15:38 Server kernel: [ 3.541477] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:15:38 Server kernel: [ 3.541487] usb 1-1.3: Product: FT232R USB UART
Oct 23 10:15:38 Server kernel: [ 3.541495] usb 1-1.3: Manufacturer: FTDI
Oct 23 10:15:38 Server kernel: [ 3.541502] usb 1-1.3: SerialNumber: A4008VqB
Oct 23 10:15:38 Server kernel: [ 3.541799] usb 1-1.3: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 3.616382] usb 1-1.4: new high speed USB device using ehci_hcd and address 6
Oct 23 10:15:38 Server kernel: [ 3.709494] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608
Oct 23 10:15:38 Server kernel: [ 3.709507] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 23 10:15:38 Server kernel: [ 3.709518] usb 1-1.4: Product: USB2.0 Hub
Oct 23 10:15:38 Server kernel: [ 3.709797] usb 1-1.4: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 3.710249] hub 1-1.4:1.0: USB hub found
Oct 23 10:15:38 Server kernel: [ 3.710612] hub 1-1.4:1.0: 4 ports detected
Oct 23 10:15:38 Server kernel: [ 3.750249] udev[276]: starting version 164
Oct 23 10:15:38 Server kernel: [ 3.984484] usb 1-1.4.1: new full speed USB device using ehci_hcd and address 7
Oct 23 10:15:38 Server kernel: [ 4.087132] usb 1-1.4.1: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:15:38 Server kernel: [ 4.087146] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:15:38 Server kernel: [ 4.087156] usb 1-1.4.1: Product: FT232R USB UART
Oct 23 10:15:38 Server kernel: [ 4.087164] usb 1-1.4.1: Manufacturer: FTDI
Oct 23 10:15:38 Server kernel: [ 4.087172] usb 1-1.4.1: SerialNumber: A400ZGDE
Oct 23 10:15:38 Server kernel: [ 4.087471] usb 1-1.4.1: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 4.160416] usb 1-1.4.3: new full speed USB device using ehci_hcd and address 8
Oct 23 10:15:38 Server kernel: [ 4.259321] usb 1-1.4.3: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:15:38 Server kernel: [ 4.259335] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:15:38 Server kernel: [ 4.259346] usb 1-1.4.3: Product: FT232R USB UART
Oct 23 10:15:38 Server kernel: [ 4.259354] usb 1-1.4.3: Manufacturer: FTDI
Oct 23 10:15:38 Server kernel: [ 4.259361] usb 1-1.4.3: SerialNumber: A500CMTR
Oct 23 10:15:38 Server kernel: [ 4.259674] usb 1-1.4.3: configuration #1 chosen from 1 choice
Oct 23 10:15:38 Server kernel: [ 4.366154] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 23 10:15:38 Server kernel: [ 4.803825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Oct 23 10:15:38 Server kernel: [ 4.803851] ACPI: Power Button [PWRB]
Oct 23 10:15:38 Server kernel: [ 4.804715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 23 10:15:38 Server kernel: [ 4.804740] ACPI: Power Button [PWRF]
Oct 23 10:15:38 Server kernel: [ 4.864979] input: PC Speaker as /devices/platform/pcspkr/input/input2
Oct 23 10:15:38 Server kernel: [ 4.867147] Marking TSC unstable due to TSC halts in idle
Oct 23 10:15:38 Server kernel: [ 4.875170] processor LNXCPU:00: registered as cooling_device0
Oct 23 10:15:38 Server kernel: [ 4.884129] Switching to clocksource acpi_pm
Oct 23 10:15:38 Server kernel: [ 4.952609] usbcore: registered new interface driver usbserial
Oct 23 10:15:38 Server kernel: [ 4.953303] USB Serial support registered for generic
Oct 23 10:15:38 Server kernel: [ 4.954998] usbcore: registered new interface driver usbserial_generic
Oct 23 10:15:38 Server kernel: [ 4.955012] usbserial: USB Serial Driver core
Oct 23 10:15:38 Server kernel: [ 4.974642] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 23 10:15:38 Server kernel: [ 5.007626] parport_pc 00:0a: reported by Plug and Play ACPI
Oct 23 10:15:38 Server kernel: [ 5.007696] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 23 10:15:38 Server kernel: [ 5.022426] USB Serial support registered for FTDI USB Serial Device
Oct 23 10:15:38 Server kernel: [ 5.023410] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
Oct 23 10:15:38 Server kernel: [ 5.023635] usb 1-1.1: Detected FT232RL
Oct 23 10:15:38 Server kernel: [ 5.023643] usb 1-1.1: Number of endpoints 2
Oct 23 10:15:38 Server kernel: [ 5.023652] usb 1-1.1: Endpoint 1 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.023660] usb 1-1.1: Endpoint 2 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.023668] usb 1-1.1: Setting MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.024799] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
Oct 23 10:15:38 Server kernel: [ 5.024859] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Oct 23 10:15:38 Server kernel: [ 5.029285] usb 1-1.2: Detected FT232RL
Oct 23 10:15:38 Server kernel: [ 5.029296] usb 1-1.2: Number of endpoints 2
Oct 23 10:15:38 Server kernel: [ 5.029305] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.029313] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.029321] usb 1-1.2: Setting MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.031143] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
Oct 23 10:15:38 Server kernel: [ 5.031217] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Oct 23 10:15:38 Server kernel: [ 5.032534] usb 1-1.3: Detected FT232RL
Oct 23 10:15:38 Server kernel: [ 5.032546] usb 1-1.3: Number of endpoints 2
Oct 23 10:15:38 Server kernel: [ 5.032555] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.032563] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.032571] usb 1-1.3: Setting MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.036429] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB2
Oct 23 10:15:38 Server kernel: [ 5.036537] ftdi_sio 1-1.4.1:1.0: FTDI USB Serial Device converter detected
Oct 23 10:15:38 Server kernel: [ 5.038028] usb 1-1.4.1: Detected FT232RL
Oct 23 10:15:38 Server kernel: [ 5.038040] usb 1-1.4.1: Number of endpoints 2
Oct 23 10:15:38 Server kernel: [ 5.038048] usb 1-1.4.1: Endpoint 1 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.038057] usb 1-1.4.1: Endpoint 2 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.038065] usb 1-1.4.1: Setting MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.040945] usb 1-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB3
Oct 23 10:15:38 Server kernel: [ 5.042028] ftdi_sio 1-1.4.3:1.0: FTDI USB Serial Device converter detected
Oct 23 10:15:38 Server kernel: [ 5.043622] usb 1-1.4.3: Detected FT232RL
Oct 23 10:15:38 Server kernel: [ 5.043635] usb 1-1.4.3: Number of endpoints 2
Oct 23 10:15:38 Server kernel: [ 5.043643] usb 1-1.4.3: Endpoint 1 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.043652] usb 1-1.4.3: Endpoint 2 MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.043660] usb 1-1.4.3: Setting MaxPacketSize 64
Oct 23 10:15:38 Server kernel: [ 5.076805] usb 1-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB4
Oct 23 10:15:38 Server kernel: [ 5.077982] usbcore: registered new interface driver ftdi_sio
Oct 23 10:15:38 Server kernel: [ 5.077993] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
Oct 23 10:15:38 Server kernel: [ 5.377103] Error: Driver 'pcspkr' is already registered, aborting...
Oct 23 10:15:38 Server kernel: [ 5.449970] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 23 10:15:38 Server kernel: [ 5.450138] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Oct 23 10:15:38 Server kernel: [ 6.619807] Adding 368632k swap on /dev/sda5. Priority:-1 extents:1 across:368632k
Oct 23 10:15:38 Server kernel: [ 17.024240] EXT3 FS on sda1, internal journal
Oct 23 10:15:38 Server kernel: [ 17.193121] loop: module loaded
Oct 23 10:15:38 Server kernel: [ 17.309953] w83627hf: Found W83697HF chip at 0x290
Oct 23 10:15:38 Server kernel: [ 17.914395] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Oct 23 10:15:38 Server acpid: starting up with netlink and the input layer
Oct 23 10:15:38 Server acpid: 4 rules loaded
Oct 23 10:15:38 Server acpid: waiting for events: event logging is off
Oct 23 10:15:38 Server LCD4Linux[1009]: drv_init(DPF) failed: no such driver
Oct 23 10:15:39 Server /usr/sbin/cron[1064]: (CRON) INFO (pidfile fd = 3)
Oct 23 10:15:39 Server /usr/sbin/cron[1071]: (CRON) STARTUP (fork ok)
Oct 23 10:15:39 Server /usr/sbin/cron[1071]: (CRON) INFO (Running @reboot jobs)
Oct 23 10:15:41 Server acpid: client connected from 1128[106:107]
Oct 23 10:15:41 Server acpid: 1 client rule loaded
Oct 23 10:15:45 Server kernel: [ 26.293661] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 23 10:15:45 Server laptop-mode: enabled, not active
Oct 23 10:15:51 Server ntpdate[811]: step time server 83.141.17.10 offset 5.692620 sec
Oct 23 10:15:52 Server kernel: [ 28.104041] eth0: no IPv6 routers present
Oct 23 10:15:58 Server kernel: [ 33.641215] oscam.x86[1565]: segfault at b740e001 ip 080d8695 sp b740d020 error 4 in oscam.x86[8048000+e6000]
Oct 23 10:16:07 Server /USR/SBIN/CRON[1579]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:16:07 Server /USR/SBIN/CRON[1580]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:16:14 Server kernel: [ 49.653223] oscam.x86[1626]: segfault at b740b001 ip 080d8695 sp b740a020 error 4 in oscam.x86[8048000+e6000]
Oct 23 10:17:01 Server /USR/SBIN/CRON[1673]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 23 10:17:01 Server /USR/SBIN/CRON[1674]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:17:01 Server /USR/SBIN/CRON[1675]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:17:08 Server kernel: [ 103.949209] oscam.x86[1722]: segfault at b73d0001 ip 080d8695 sp b73cf020 error 4 in oscam.x86[8048000+e6000]
Oct 23 10:17:46 Server /usr/sbin/cron[1899]: (CRON) INFO (pidfile fd = 3)
Oct 23 10:17:46 Server /usr/sbin/cron[1900]: (CRON) STARTUP (fork ok)
Oct 23 10:17:46 Server /usr/sbin/cron[1900]: (CRON) INFO (Skipping @reboot jobs -- not system startup)
Oct 23 10:18:01 Server /USR/SBIN/CRON[1937]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:18:01 Server /USR/SBIN/CRON[1938]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:19:01 Server /USR/SBIN/CRON[2361]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:19:01 Server /USR/SBIN/CRON[2362]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:20:01 Server /USR/SBIN/CRON[2782]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:20:01 Server /USR/SBIN/CRON[2783]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:21:01 Server /USR/SBIN/CRON[3188]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:21:01 Server /USR/SBIN/CRON[3189]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:22:02 Server /USR/SBIN/CRON[3583]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:22:02 Server /USR/SBIN/CRON[3584]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:23:01 Server /USR/SBIN/CRON[3987]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:23:01 Server /USR/SBIN/CRON[3988]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:24:01 Server /USR/SBIN/CRON[4391]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:24:01 Server /USR/SBIN/CRON[4392]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:25:01 Server /USR/SBIN/CRON[4813]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:25:01 Server /USR/SBIN/CRON[4814]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:26:01 Server /USR/SBIN/CRON[5195]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:26:01 Server /USR/SBIN/CRON[5196]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:27:02 Server /USR/SBIN/CRON[5562]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:27:02 Server /USR/SBIN/CRON[5563]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:28:01 Server /USR/SBIN/CRON[5937]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:28:01 Server /USR/SBIN/CRON[5938]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:29:01 Server /USR/SBIN/CRON[6314]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:29:01 Server /USR/SBIN/CRON[6315]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:30:01 Server /USR/SBIN/CRON[6687]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:30:01 Server /USR/SBIN/CRON[6688]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:31:01 Server /USR/SBIN/CRON[7064]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:31:01 Server /USR/SBIN/CRON[7065]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:32:02 Server /USR/SBIN/CRON[7441]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:32:02 Server /USR/SBIN/CRON[7442]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:33:01 Server /USR/SBIN/CRON[7801]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:33:01 Server /USR/SBIN/CRON[7802]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:34:01 Server /USR/SBIN/CRON[8182]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:34:01 Server /USR/SBIN/CRON[8183]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:34:37 Server kernel: [ 1152.336440] usb 1-1.2: USB disconnect, address 4
Oct 23 10:34:37 Server kernel: [ 1152.339902] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Oct 23 10:34:37 Server kernel: [ 1152.341321] ftdi_sio 1-1.2:1.0: device disconnected
Oct 23 10:34:46 Server kernel: [ 1161.416073] usb 4-1: new full speed USB device using uhci_hcd and address 2
Oct 23 10:34:46 Server kernel: [ 1161.606802] usb 4-1: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:34:46 Server kernel: [ 1161.606815] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:34:46 Server kernel: [ 1161.606826] usb 4-1: Product: FT232R USB UART
Oct 23 10:34:46 Server kernel: [ 1161.606834] usb 4-1: Manufacturer: FTDI
Oct 23 10:34:46 Server kernel: [ 1161.606841] usb 4-1: SerialNumber: A400ZFD3
Oct 23 10:34:46 Server kernel: [ 1161.609693] usb 4-1: configuration #1 chosen from 1 choice
Oct 23 10:34:46 Server kernel: [ 1161.616963] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
Oct 23 10:34:46 Server kernel: [ 1161.617075] usb 4-1: Detected FT232RL
Oct 23 10:34:46 Server kernel: [ 1161.617083] usb 4-1: Number of endpoints 2
Oct 23 10:34:46 Server kernel: [ 1161.617091] usb 4-1: Endpoint 1 MaxPacketSize 64
Oct 23 10:34:46 Server kernel: [ 1161.617100] usb 4-1: Endpoint 2 MaxPacketSize 64
Oct 23 10:34:46 Server kernel: [ 1161.617108] usb 4-1: Setting MaxPacketSize 64
Oct 23 10:34:46 Server kernel: [ 1161.618176] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB5
Oct 23 10:35:01 Server /USR/SBIN/CRON[8549]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:35:01 Server /USR/SBIN/CRON[8550]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:35:06 Server kernel: [ 1181.504368] usb 1-1.3: USB disconnect, address 5
Oct 23 10:35:06 Server kernel: [ 1181.507624] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Oct 23 10:35:06 Server kernel: [ 1181.508949] ftdi_sio 1-1.3:1.0: device disconnected
Oct 23 10:35:17 Server kernel: [ 1192.544059] usb 4-2: new full speed USB device using uhci_hcd and address 3
Oct 23 10:35:17 Server kernel: [ 1192.738930] usb 4-2: New USB device found, idVendor=0403, idProduct=6001
Oct 23 10:35:17 Server kernel: [ 1192.738944] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 23 10:35:17 Server kernel: [ 1192.738954] usb 4-2: Product: FT232R USB UART
Oct 23 10:35:17 Server kernel: [ 1192.738962] usb 4-2: Manufacturer: FTDI
Oct 23 10:35:17 Server kernel: [ 1192.738969] usb 4-2: SerialNumber: A4008VqB
Oct 23 10:35:17 Server kernel: [ 1192.741600] usb 4-2: configuration #1 chosen from 1 choice
Oct 23 10:35:17 Server kernel: [ 1192.749090] ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected
Oct 23 10:35:17 Server kernel: [ 1192.749173] usb 4-2: Detected FT232RL
Oct 23 10:35:17 Server kernel: [ 1192.749181] usb 4-2: Number of endpoints 2
Oct 23 10:35:17 Server kernel: [ 1192.749189] usb 4-2: Endpoint 1 MaxPacketSize 64
Oct 23 10:35:17 Server kernel: [ 1192.749198] usb 4-2: Endpoint 2 MaxPacketSize 64
Oct 23 10:35:17 Server kernel: [ 1192.749206] usb 4-2: Setting MaxPacketSize 64
Oct 23 10:35:17 Server kernel: [ 1192.750259] usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB6
Oct 23 10:36:01 Server /USR/SBIN/CRON[8824]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:36:01 Server /USR/SBIN/CRON[8825]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:37:01 Server /USR/SBIN/CRON[9142]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:37:01 Server /USR/SBIN/CRON[9143]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:38:01 Server /USR/SBIN/CRON[9513]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:38:01 Server /USR/SBIN/CRON[9514]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:39:01 Server /USR/SBIN/CRON[9886]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:39:01 Server /USR/SBIN/CRON[9887]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete)
Oct 23 10:39:01 Server /USR/SBIN/CRON[9888]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:40:01 Server /USR/SBIN/CRON[10253]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:40:01 Server /USR/SBIN/CRON[10254]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:41:01 Server /USR/SBIN/CRON[10612]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:41:01 Server /USR/SBIN/CRON[10613]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:42:01 Server /USR/SBIN/CRON[10962]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:42:01 Server /USR/SBIN/CRON[10963]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:43:01 Server /USR/SBIN/CRON[11317]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:43:01 Server /USR/SBIN/CRON[11318]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:44:01 Server /USR/SBIN/CRON[11701]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:44:01 Server /USR/SBIN/CRON[11702]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:45:01 Server /USR/SBIN/CRON[12062]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:45:01 Server /USR/SBIN/CRON[12063]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:46:01 Server /USR/SBIN/CRON[12412]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:46:01 Server /USR/SBIN/CRON[12413]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:47:01 Server /USR/SBIN/CRON[12766]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:47:01 Server /USR/SBIN/CRON[12767]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:48:01 Server /USR/SBIN/CRON[13123]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:48:01 Server /USR/SBIN/CRON[13124]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:49:01 Server /USR/SBIN/CRON[13489]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:49:01 Server /USR/SBIN/CRON[13490]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:50:01 Server /USR/SBIN/CRON[13849]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:50:01 Server /USR/SBIN/CRON[13850]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:51:01 Server /USR/SBIN/CRON[14206]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:51:01 Server /USR/SBIN/CRON[14207]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:52:01 Server /USR/SBIN/CRON[14564]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:52:01 Server /USR/SBIN/CRON[14565]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:53:01 Server /USR/SBIN/CRON[14921]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:53:01 Server /USR/SBIN/CRON[14922]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:54:01 Server /USR/SBIN/CRON[15284]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:54:01 Server /USR/SBIN/CRON[15285]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:55:01 Server /USR/SBIN/CRON[15641]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:55:01 Server /USR/SBIN/CRON[15642]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:56:01 Server /USR/SBIN/CRON[15990]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:56:01 Server /USR/SBIN/CRON[15991]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:57:01 Server /USR/SBIN/CRON[16348]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:57:01 Server /USR/SBIN/CRON[16349]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:58:01 Server /USR/SBIN/CRON[16686]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:58:01 Server /USR/SBIN/CRON[16687]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 10:59:01 Server /USR/SBIN/CRON[17029]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 10:59:01 Server /USR/SBIN/CRON[17030]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:00:01 Server /USR/SBIN/CRON[17366]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:00:01 Server /USR/SBIN/CRON[17367]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:01:01 Server /USR/SBIN/CRON[17699]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:01:01 Server /USR/SBIN/CRON[17700]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:02:01 Server /USR/SBIN/CRON[18037]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:02:01 Server /USR/SBIN/CRON[18038]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:03:01 Server /USR/SBIN/CRON[18380]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:03:01 Server /USR/SBIN/CRON[18381]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:04:01 Server /USR/SBIN/CRON[18717]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:04:01 Server /USR/SBIN/CRON[18718]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:05:01 Server /USR/SBIN/CRON[19058]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:05:01 Server /USR/SBIN/CRON[19059]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:06:01 Server /USR/SBIN/CRON[19388]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:06:01 Server /USR/SBIN/CRON[19389]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:07:01 Server /USR/SBIN/CRON[19733]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:07:01 Server /USR/SBIN/CRON[19734]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))
Oct 23 11:08:01 Server /USR/SBIN/CRON[20077]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 23 11:08:01 Server /USR/SBIN/CRON[20078]: (root) CMD (/var/emu/script/camd3-watchdog.sh #Teste ob Camd3 laeuft (jede Minute))

OSCAM.log vom start

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Oct 23 10:17:45 2012
-------------------------------------------------------------------------------
2012/10/23 10:17:45 0 s starting thread log_list_thread
2012/10/23 10:17:45 0 s log_list_thread thread started
2012/10/23 10:17:45 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7754 (i486-linux-gnu)
2012/10/23 10:17:45 0 s version=1.20-unstable_svn, build #7754, system=i486-linux-gnu, nice=0
2012/10/23 10:17:45 0 s client max. idle=300 sec, debug level=0, filter_sensitive=1
2012/10/23 10:17:45 0 s max. logsize=4096 Kb, loghistorysize=4096 bytes
2012/10/23 10:17:45 0 s client timeout=4700 ms, fallback timeout=2600 ms, cache delay=0 ms
2012/10/23 10:17:45 0 s services reloaded: 0 services freed, 21 services loaded, rejected 0
2012/10/23 10:17:45 0 s userdb reloaded: 15 accounts loaded, 0 expired, 0 disabled
2012/10/23 10:17:45 0 s signal handling initialized (type=sysv)
2012/10/23 10:17:45 0 s 290 service-id's loaded in 2ms
2012/10/23 10:17:45 0 s oscam.tiers loading failed
2012/10/23 10:17:45 0 s 6 provid's loaded
2012/10/23 10:17:45 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2012/10/23 10:17:45 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2012/10/23 10:17:45 0 s ERROR: Cannot open file "/var/etc/oscam.whitelist" (errno=2 No such file or directory)
2012/10/23 10:17:45 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s monitor: disabled
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s camd35: initialized (fd=5, port=xxxxx)
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s cs378x: initialized (fd=6, port=xxx)
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s newcamd: disabled
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s cccam: initialized (fd=7, port=xxxxxxxx, crypted)
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s pandora: disabled
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s csp: disabled
2012/10/23 10:17:45 0 s Starting listener 0
2012/10/23 10:17:45 0 s radegast: disabled
2012/10/23 10:17:45 0 s starting thread http
2012/10/23 10:17:45 0 s http thread started
2012/10/23 10:17:45 0 s starting thread reader check
2012/10/23 10:17:45 0 s reader check thread started
2012/10/23 10:17:45 0 s starting thread check
2012/10/23 10:17:45 0 s check thread started
2012/10/23 10:17:45 0 s sky_um_i12 [mouse] creating thread for device /dev/EASYMOUSE2-2
2012/10/23 10:17:45 0 s sky_satellit_v13 [mouse] creating thread for device /dev/EASYMOUSE2-3
2012/10/23 10:17:45 0 s um01 [mouse] creating thread for device /dev/EASYMOUSE2-1
2012/10/23 10:17:45 0 s um02_extern [cccam] creating thread for device xxxxxxxxxxxx
2012/10/23 10:17:45 0 s camd3_emu [camd35] creating thread for device localhost
2012/10/23 10:17:45 0 s hd+ [mouse] creating thread for device /dev/EASYMOUSE2-4
2012/10/23 10:17:46 0 s redlight [mouse] creating thread for device /dev/EASYMOUSE2-5
2012/10/23 10:17:46 0 s cacheex3-1 [cccam] creating thread for device xxxxxxxxxxx
2012/10/23 10:17:46 0 s um02_extern_2 [cccam] creating thread for device xxxxxxxxxxx
2012/10/23 10:17:46 0 s waiting for local card init
2012/10/23 10:17:46 8EB3138 h HTTP Server listening on port xxxxxxxxx
2012/10/23 10:17:46 8EB00A8 p camd35 proxy localhost:xxxxxxxxxx
2012/10/23 10:17:46 8EB00A8 p camd3_emu [camd35] proxy initialized, server localhost:xxxxxxxxxx
2012/10/23 10:17:46 8EAE860 p dynolu.no-ip.info: resolved ip=xxxxxxxxxxxx
2012/10/23 10:17:46 8EAE860 p um02_extern [cccam] connecting to xxxxxxxxxxxx:xxxxxxxx
2012/10/23 10:17:46 8EB86B8 p my-ovpn.dyndns.org: resolved ip=xxxxxxxxx
2012/10/23 10:17:46 8EB86B8 p cacheex3-1 [cccam] connecting to xxxxxxxxxxx:xxxxxxxxx
2012/10/23 10:17:46 8EBA000 p mkwiat.dyndns-server.com: resolved ip=xxxxxxxxxx
2012/10/23 10:17:46 8EBA000 p um02_extern_2 [cccam] connecting to xxxxxxxxxxxxxxxx
2012/10/23 10:17:46 8EB86B8 p cacheex3-1 [cccam] proxy initialized, server xxxxxxxxxxxxx
2012/10/23 10:17:46 8EBA000 p um02_extern_2 [cccam] proxy initialized, server xxxxxxxxxxx
2012/10/23 10:17:46 8EAE860 p um02_extern [cccam] proxy initialized, server xxxxxxxxxxxxxx
2012/10/23 10:17:48 8EB6DE0 r redlight [mouse] Reader initialized (device=/dev/EASYMOUSE2-5, detect=cd, mhz=368, cardmhz=368)
2012/10/23 10:17:48 8EA4BE8 r sky_satellit_v13 [mouse] Reader initialized (device=/dev/EASYMOUSE2-3, detect=cd, mhz=600, cardmhz=357)
2012/10/23 10:17:48 8EAD018 r um01 [mouse] Reader initialized (device=/dev/EASYMOUSE2-1, detect=cd, mhz=357, cardmhz=368)
2012/10/23 10:17:48 8EB5598 r hd+ [mouse] Reader initialized (device=/dev/EASYMOUSE2-4, detect=cd, mhz=368, cardmhz=368)
2012/10/23 10:17:48 8EA3278 r sky_um_i12 [mouse] Reader initialized (device=/dev/EASYMOUSE2-2, detect=cd, mhz=600, cardmhz=600)
2012/10/23 10:17:48 8EB5598 r hd+ [mouse] card detected
2012/10/23 10:17:48 8EB6DE0 r redlight [mouse] card detected
2012/10/23 10:17:48 8EAD018 r um01 [mouse] card detected
2012/10/23 10:17:48 8EA4BE8 r sky_satellit_v13 [mouse] card detected
2012/10/23 10:17:48 8EA3278 r sky_um_i12 [mouse] card detected
2012/10/23 10:17:53 8EB6DE0 r redlight [mouse] ATR: xxxxxxxxxxxxxxx
2012/10/23 10:17:53 8EA4BE8 r sky_satellit_v13 [mouse] ATR:xxxxxxxxxxxxx
2012/10/23 10:17:53 8EA3278 r sky_um_i12 [mouse] ATR: xxxxxxxxxxxxxxxx
2012/10/23 10:17:53 8EAD018 r um01 [mouse] ATR: xxxxxxxxxxxxxxxxxx
2012/10/23 10:17:53 8EB5598 r hd+ [mouse] ATR: xxxxxxxxxxxxx
2012/10/23 10:17:54 8EA3278 r sky_um_i12 [mouse] Cardfrequency advertised by ATR is 6 Mhz, set clock of readerdevice to 6.00 Mhz as specified by user in reader MHZ setting
2012/10/23 10:17:54 8EA4BE8 r sky_satellit_v13 [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 6.00 Mhz as specified by user in reader MHZ setting
2012/10/23 10:17:54 8EAD018 r um01 [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.57 Mhz as specified by user in reader MHZ setting
2012/10/23 10:17:54 8EAD018 r um01 [mouse] Card responded ok for ifsd request of 251
2012/10/23 10:17:55 8EB5598 r hd+ [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/10/23 10:17:55 8EB5598 r hd+ [mouse] Card responded ok for ifsd request of 251
2012/10/23 10:17:55 8EA3278 r sky_um_i12 [mouse] detect irdeto tunneled nagra card
2012/10/23 10:17:55 8EA3278 r sky_um_i12 [mouse] no rsa key configured -> using irdeto mode
2012/10/23 10:17:55 8EA3278 r sky_um_i12 [mouse] detect irdeto card
2012/10/23 10:17:55 8EA3278 r sky_um_i12 [mouse] caid: 1722, acs: 3.84, country code: TEL
2012/10/23 10:17:55 8EA3278 r sky_um_i12 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2012/10/23 10:17:55 8EB6DE0 r redlight [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/10/23 10:17:55 8EAD018 r um01 [mouse] detect native nagra card
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [mouse] Card type: P1TV
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [mouse] Rom version: 10A7
2012/10/23 10:17:56 8EAD018 r um01 [mouse] type: NAGRA, caid: 1831, IRD ID: ############
2012/10/23 10:17:56 8EAD018 r um01 [mouse] ProviderID: 00 00 04 01
2012/10/23 10:17:56 8EAD018 r um01 [mouse] active to: 2013/01/16 11:59
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] detect native nagra card
2012/10/23 10:17:56 8EAD018 r um01 [mouse] -----------------------------------------
2012/10/23 10:17:56 8EAD018 r um01 [mouse] |id |tier |valid from |valid to |
2012/10/23 10:17:56 8EAD018 r um01 [mouse] +----+--------+------------+------------+
2012/10/23 10:17:56 8EAD018 r um01 [mouse] |xxxx|xxxx |2012/07/17 |2013/01/16 |
2012/10/23 10:17:56 8EAD018 r um01 [mouse] |xxxx|xxxx |2008/05/28 |2009/09/04 |
2012/10/23 10:17:56 8EAD018 r um01 [mouse] -----------------------------------------
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] type: NAGRA, caid: 1830, IRD ID: ############
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] ProviderID: xxxxxxxxxxx
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] active to: 2012/12/14 11:59
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [mouse] found card system videoguard2
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [videoguard2] card detected
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2012/10/23 10:17:56 8EA4BE8 r sky_satellit_v13 [mouse] Doing fast reset
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] -----------------------------------------
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] |id |tier |valid from |valid to |
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] +----+--------+------------+------------+
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] |xxxx|xxxx |2012/08/18 |2013/08/19 |
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] |xxxx|xxxx |1992/01/01 |1993/01/01 |
2012/10/23 10:17:56 8EB5598 r hd+ [mouse] -----------------------------------------
2012/10/23 10:17:56 8EAD018 r um01 [mouse] found card system nagra
2012/10/23 10:17:56 8EAD018 r um01 [nagra] ROM: D N A S P 1 1 0
2012/10/23 10:17:56 8EAD018 r um01 [nagra] REV: R e v A 2 2
2012/10/23 10:17:56 8EAD018 r um01 [nagra] SER: ############
2012/10/23 10:17:56 8EAD018 r um01 [nagra] CAID: 1831
2012/10/23 10:17:56 8EAD018 r um01 [nagra] Prv.ID: xxxxxxx (sysid)
2012/10/23 10:17:56 8EAD018 r um01 [nagra] Prv.ID: xxxxx
2012/10/23 10:17:56 8EAD018 r um01 [nagra] Prv.ID: xxxxxx
2012/10/23 10:17:56 8EAD018 r um01 [nagra] ready for requests
2012/10/23 10:17:57 8EB5598 r hd+ [mouse] found card system nagra
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] ROM: xxxx
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] REV: xxxx
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] SER: ############
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] CAID: 1830
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] Prv.ID: xxxx (sysid)
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] Prv.ID: xxxx
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] Prv.ID:xxxx
2012/10/23 10:17:57 8EB5598 r hd+ [nagra] ready for requests
2012/10/23 10:17:57 8EB6DE0 r redlight [mouse] using ecm #60d for long viaccess ecm
2012/10/23 10:17:57 8EB6DE0 r redlight [mouse] type: Viaccess (standard atr), caid: 0500, serial: ##########
2012/10/23 10:17:57 8EB6DE0 r redlight [mouse] providers: 2 (FFF8F0,043800)
2012/10/23 10:17:57 8EB6DE0 r redlight [mouse] ready for requests
2012/10/23 10:17:57 8EB6DE0 r redlight [mouse] found card system viaccess
2012/10/23 10:17:57 8EB6DE0 r redlight [viaccess] card detected
2012/10/23 10:17:57 8EB6DE0 r redlight [viaccess] serial: ##########
2012/10/23 10:17:57 8EB6DE0 r redlight [viaccess] provider: 1, id: ######################, sa: ########, geo: empty
2012/10/23 10:17:58 8EB6DE0 r redlight [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF
2012/10/23 10:17:58 8EB6DE0 r redlight [viaccess] class: 02, expiry date: 2012/09/25 - 2013/03/23
2012/10/23 10:17:58 8EA3278 r sky_um_i12 [mouse] active providers: 2 (000000,000000)
2012/10/23 10:17:58 8EA3278 r sky_um_i12 [mouse] found card system irdeto
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] entitlements for provider: 2, id: 000000
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05FB, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05DD, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05DF, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 00F0, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 000F, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05E7, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 04CE, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 7D23, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05DE, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05E8, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 05F1, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 0605, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] chid: 7D27, date: 2012/03/08 - 2012/11/17
2012/10/23 10:17:59 8EA3278 r sky_um_i12 [irdeto] ready for requests
2012/10/23 10:18:00 8EA4BE8 r sky_satellit_v13 [mouse] ATR: xxxxxxxxxxxxxxxxxxxx
2012/10/23 10:18:02 8EA4BE8 r sky_satellit_v13 [mouse] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 6.00 Mhz as specified by user in reader MHZ setting
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] Card type: P1TV
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] Rom version: xxxxxxxx
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] parental lock setting: FF FF FF FF
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] type: VideoGuard Sky Germany (09C4) FastMode, caid: 09C4
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] ready for requests
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [mouse] found card system videoguard2
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [videoguard2] card detected
2012/10/23 10:18:03 8EA4BE8 r sky_satellit_v13 [videoguard2] type: VideoGuard Sky Germany (09C4) FastMode
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0046, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0056, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0057, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0058, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 005a, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0065, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0066, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0067, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0068, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0069, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006a, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006b, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006c, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006d, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006e, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 006f, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 007b, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 007d, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 0081, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 008e, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00c0, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00c7, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00c8, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00c9, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00ca, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00cb, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00f3, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00fa, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:04 8EA4BE8 r sky_satellit_v13 [videoguard2] tier: 00ff, expiry date: 2013/02/03-00:01:00
2012/10/23 10:18:07 0 s init for all local cards done
2012/10/23 10:18:07 0 s anti cascading disabled

Na, ich hoffe ihr könnt mir Helfen!

Michibata · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Ich würde den Usern nich so viel cccammaxhops geben. Auch das keepalive ist bei den Usern unnötig. Die Verbindung muss nicht zwangsweise offen gehalten werden.
Hast du kürzlich neue Klienten dazu bekommen?

speckthehut · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Ja habe zwei neue OSCAM Clienten dazu bekommen. Alle mit der selben config und mit OSCAM Version 59xx. Meine Dreambox hat die OSCAM version 7291, doch machen alle den selben Fehler. Die Hops werde ich noch einstellen. Danke Dir

hot chili · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Die Timeouts werden negative Sids sein.
Du hast damit ja schon gut angefangen, ggf fehlen noch ein paar,
bzw der CAID 09c4 fehlt ggf auch in einigen Negativen

speckthehut · 23. Oktober 2012

Das glaub ich nicht so recht da derer jeweilige Client dann auch freezer bekommt.
Ob sowas zustande gekommen ist weil ich 5 Reader passiv am Hub hängen hatte?

hot chili · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

ja das ist klar, der kommt über die Zeit.
kannst den Timeout denn erkennen als Sid.

Unter Reader- show loadbalancer statistik

szonic · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Timeouts kommen (fast immer) von fehlerhaften Configs.
Also fange damit an die services zu kontrollieren, den LB zu resetten.

Vielleicht nimmst Du die services mal raus, Möglichkeiten gibt es viele.
Ich tippe auf die Kombie zwischen services und LB.

Grüsse
szonic

hwmmc · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Vllt. liegt es aber auch beim Share-Partner und den seine Configs.

speckthehut · 23. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Hallo zusammen!

Endlich Feierabend!

Der fehler trat heute wieder auf, diemal mit meinem Eigenen Reciever einer Dreambox 7020 HD

2012/10/23 18:25:57 8F12808 c encrypted camd35-client 192.168.1.101 granted (Dreambox7020HD, au=on (5 reader))
2012/10/23 18:25:57 8F12808 c Dreambox7020HD emm-request sent (reader=sky_satellit_v13, caid=09C4, auprovid=000000)
2012/10/23 18:25:57 8F12808 c Dreambox7020HD (09C4&000000/0000/0024/90:BA90): found (116 ms) by sky_satellit_v13
2012/10/23 18:25:58 8F8FA28 c xxxx (1722&000000/0000/0009/93:0759): found (548 ms) by sky_um_i12
2012/10/23 18:25:59 8F12808 c Dreambox7020HD (09C4&000000/0000/0024/90:329E): found (116 ms) by sky_satellit_v13
2012/10/23 18:26:03 8EEE268 c xxxxx (1722&000000/0000/00DD/93:1763): found (544 ms) by sky_um_i12
2012/10/23 18:26:06 8F34018 c xxxxx (1831&000000/0000/2F47/4A:4B3F): found (156 ms) by um01
2012/10/23 18:26:08 8F8FA28 c xxxxxxxxx (1722&000000/0000/0009/93:B740): found (546 ms) by sky_um_i12
2012/10/23 18:26:09 8F12808 c Dreambox7020HD (09C4&000000/0000/0024/90:8CE5): found (117 ms) by sky_satellit_v13
2012/10/23 18:26:13 8EEE268 c xxxxxxx (1722&000000/0000/00DD/93:66E7): found (546 ms) by sky_um_i12
2012/10/23 18:26:16 8F34018 c xxxxxxxx (1831&000000/0000/2F47/4A:7D40): found (154 ms) by um01
2012/10/23 18:26:18 8EB5598 r hd+ [nagra] T1 Resync command error, trying to reactivate!
2012/10/23 18:26:18 8F8FA28 c xxxxx (1722&000000/0000/0009/93:2FFF): found (548 ms) by sky_um_i12
2012/10/23 18:26:20 8F12808 c Dreambox7020HD emm-request sent (reader=hd+, caid=1830, auprovid=003411)
2012/10/23 18:26:20 8F12808 c Dreambox7020HD (1830&000000/0000/EF10/92:4433): timeout (4700 ms) by hd+
2012/10/23 18:26:23 8EB5598 r hd+ [nagra] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2012/10/23 18:26:23 8EEE268 c xxxxxx (1722&000000/0000/00DD/93:14A1): found (547 ms) by sky_um_i12
2012/10/23 18:26:24 8F12808 c Dreambox7020HD (1830&000000/0000/EF10/92:5C44): timeout (4700 ms) by hd+

2012/10/23 18:26:24 8EB5598 r hd+ [nagra] Cardfrequency advertised by ATR is 5 Mhz, set clock of readerdevice to 3.68 Mhz as specified by user in reader MHZ setting
2012/10/23 18:26:24 8EB5598 r hd+ [nagra] Card responded ok for ifsd request of 251
2012/10/23 18:26:24 8EB5598 r dropping client data for hd+ time 6s

Danach ist es wieder hell! Dr Senderauf "EF10" ist auch völlig korrekt! Habe hier im Board gelesen das bei dem Fehler wohl die 6xxx Versionen von OSCAM laufen sollen. Vor ein paar Monaten hatte ich die 6950 er Version am laufen gehabt und Wochenlang keinen neustart von OSCAM machen müssen. Da werd ich denk ich mal drauf zurück gehen. Nur Schade das da glaub ich CacheEx nicht mehr so pralle ist.
Oder was meint ihr? Jetzt ist ja endlich ein Logeintrag mit dem Fehler vorhanden

Nur den selben Fehler macht ja auch die V13 von Mir

Nur so einen Fehler hatte ich heute "noch" nicht.

szonic · 24. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

@hwmmc:
Da der TE beschreibt in #3 das seine Dream auch den Fehler produziert, würde ich erstmal "zu Hause" nach dem rechten sehen.
Natürlich hast Du recht, auch die Clienten können schlecht konfiguriert haben!

speckthehut schrieb:
.... Meine Dreambox hat die OSCAM version 7291, doch machen alle den selben Fehler.....

breitflansch · 24. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Talk [nagra] T1 Resync command error, trying to reactivate!!

speckthehut · 24. Oktober 2012

AW: OSCAM unerklärbare Timeout´s

Hallo!

Heute war mal sowas wie ein totalausfall auf der V13 und der HD01...

Jetzt habe ich die ECM Whitelist komplett rausgenommen, und siehe da es werde Hell! Was mir aufgefallen ist das im WebIF steht

ECM filtered by Head / Len. Und für Len steht da 126!

Kann es sein das die da an den längen der ECM´s rumspielen?!

Aber mal gucken, bis jetzt läuft es wieder Perfekt. Mal gucken ob es auch so bleibt

Fahre jetzt übrigens die OSCAM Ver. 7797

EDIT:

Wenn wir gerade beim Thema sind. In der ECM Whitelist hatte ich stehen: 09C4:46,58,90,95
Doch beim Streamboard steht da: 51,63,9B,A0 / 51 = Blue Movie / 63 = HD+ / 9B = Sky / A0 -> Live Event's (Sky)

Da haben wir wohl schon den Salat!

Doch warum sich die HD01 verabschiedet hatte bzw. nur ab und an mal lief ist mir nicht klar. Da wird noch was Arbeit für nötig sein...

Hier mal ein paar Auszüge aus dem LOG

[h=1](09C4&000000/0000/006A/9B:32B2): rejected group (0 ms) (0/0/0/0) (no matching reader) <---- Wie man sieht ist der ECM 9B, was ich nciht in der Whitelist hatte[/h](09C4&000000/0000/EF11/63:6BE6): rejected group (1 ms) (0/0/0/0) (no matching reader) <--- ECM 63

Nur geht es mir einfach nicht auf wieso die HD01 Probleme macht. Vor allem seh ich nichts im LOG!

Woopser · 24. Oktober 2012

Die ecm Länge der v13 wurde heute geändert. Alle die ecm whitelist aktiv haben oder hatten bei denen ist es dunkel. Neue Werte rein und es läuft wieder oder ecm whitelist erstmal raus nehmen !

Sent from my iPhone using Tapatalk

Suche

Suche

OSCAM unerklärbare Timeout´s

speckthehut

Hacker

Michibata

Ist oft hier

speckthehut

Hacker

hot chili

Power Elite User

speckthehut

Hacker

hot chili

Power Elite User

szonic

hwmmc

DEB König

speckthehut

Hacker

szonic

breitflansch

Hacker

speckthehut

Hacker

Woopser

Stamm User

Ähnliche Themen

Spenden Unterstützung