OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"!!!

[netsrot]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

meinst du das funknetz ?
hab ich schon probiert bringt auch nix

gruß

 

[netsrot]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

würde das was bringen den WAN zu stoppen ?
ist der router dann noch erreichbar ?

 

[VDRDAU]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

@derdigge

Hallo,
erstmal erneuert ein fettes "Danke" für deine klasse Arbeit. Ohne dein Image wäre ein Oscam-Server für mich und sicherlich auch für viele andere undenkbar bis unmöglich gewesen. Many thanks !

Sicherlich schauen hier auch einige Leute rein, die noch keinen passenden Router besitzen. Und auf mittlerweile über 55 Seiten wird es auch langsam recht unübersichtlich, mal eben schnell rauszufinden, wer welche Hardware im Einsatz hat und welche Aussagen darüber getroffen werden können. Dein Einverständnis vorausgesetzt, würde ich also gerne einen zweiten Thread eröffnen, in Anlehnung an diesen, bzw. dein Image. Der sich allerdings nur mit der verwendeten Hardware beschäftigen soll. Rückmeldungen und Probleme zu den einzelnen Images bitte weiterhin hier in diesen Thread.

Dort könnte dann jeder beispielsweise nach folgendem Muster posten

TP-Link TL-WDR4300, USB-Smartmouse, Image vom ......., Ohne Reboot seit...., Besonderheiten, Anschaffungskosten, Kaufempfehlung, Positiv, Negativ

Wäre das sinnvoll, bzw. von Interesse ?

CU
VDRDAU

 

[derdigge]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

@VDRDAU

Das ist ne klasse Idee, Ich hatte schonmal das Thema Documentation angerissen.
Ich habe immer keine Zeit für sowas. Wenn ich denn mal am Computer bin, mache ich sowas :

serial_location=$(find $DEVPATH | grep serial)
logger $serial_location

if [ "${PRODUCT}" = "${CP210_PRODID}" ];then
        if [ "${ACTION}" = "add" ];then
       DEVICE_NAME=$(ls /sys/$DEVPATH | grep ttyUSB)
         if [ -z ${DEVICE_NAME} ];
            exit
         fi
                        ln -s /dev/$DEVICE_NAME /dev/${SYMLINK}
        fi

Das wird ein custom udev nur für FTDI devices, welches mit boardmitteln ohne udev funzt.
Dürfte heut nachmittag fertig sein . Das ganze kommt dann per Updateservice auf eure Geräte :]]

Aber mal im Ernst. Du kannst auch etwas in PDF machen. Was den Leuten immer probleme bereitet ist die integration in bestehendes netzwerk
oder wie mache ich einen port auf usw..... An oscam scheitert es seltenst!

@netsrot

Also wlan0 authenticated laut deinem log im 4 sekunden takt. Das könnte das Bild, welches du beschreibst, erklären.
Aber Ferndiagnosen sind immer schwierig!

 

[zottel-1977]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

Sorry hätte ja sein können, das irgendwer heute Nacht auch diese Probleme hatte, bzw hat. Da ja alles super lief und auf einmal kein Bild mehr da war und dieser Fehler kam.

Hier die Logs Systemprotokol

Spoiler

Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.440000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.450000] msgmni has been set to 56
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.460000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.470000] io scheduler noop registered
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.470000] io scheduler deadline registered (default)
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.470000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.510000] console [ttyS0] enabled, bootconsole disabled
Nov 18 10:42:03 OpenWrt kern.warn kernel: [ 0.530000] m25p80 spi0.0: found s25sl064a, expected m25p80
Nov 18 10:42:03 OpenWrt kern.info kernel: [ 0.530000] m25p80 spi0.0: s25sl064a (8192 Kbytes)
Nov 18 10:42:03 OpenWrt kern.notice kernel: [ 0.540000] 5 tp-link partitions found on MTD device spi0.0
Nov 18 10:42:03 OpenWrt kern.notice kernel: [ 0.540000] Creating 5 MTD partitions on "spi0.0":
Nov 18 10:42:03 OpenWrt kern.notice kernel: [ 0.550000] 0x000000000000-0x000000020000 : "u-boot"
Nov 18 10:42:03 OpenWrt kern.notice kernel: [ 0.560000] 0x000000020000-0x00000010b800 : "kernel"
Nov 18 10:42:04 OpenWrt kern.warn kernel: [ 0.560000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.570000] 0x00000010b800-0x0000007f0000 : "rootfs"
Nov 18 10:42:04 OpenWrt kern.warn kernel: [ 0.580000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.590000] mtd: partition "rootfs" set to be root filesystem
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 0.600000] mtd: partition "rootfs_data" created automatically, ofs=3C0000, len=430000
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.610000] 0x0000003c0000-0x0000007f0000 : "rootfs_data"
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.620000] 0x0000007f0000-0x000000800000 : "art"
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.620000] 0x000000020000-0x0000007f0000 : "firmware"
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 0.630000] Realtek RTL8366RB ethernet switch driver version 0.2.3
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 0.750000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 0.750000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 0.930000] rtl8366rb: probed
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 0.940000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 1.240000] TCP cubic registered
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 1.250000] NET: Registered protocol family 17
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 1.250000] Bridge firewalling registered
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 1.260000] 8021q: 802.1Q VLAN Support v1.8
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 1.270000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 1.270000] Freeing unused kernel memory: 212k freed
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 3.340000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 3.340000] eth0: link up (1000Mbps/Full duplex)
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 3.370000] Registered led device: tp-link:green:usb
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 3.370000] Registered led device: tp-link:green:system
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 3.370000] Registered led device: tp-link:green:qss
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 3.370000] Registered led device: tp-link:green:wlan
Nov 18 10:42:04 OpenWrt kern.notice kernel: [ 6.650000] JFFS2 notice: (437) jffs2_build_xattr_subsystem: complete building xattr subsystem, 22 of xdatum (0 unchecked, 21 orphan) and 31 of xref (0 dead, 21 orphan) found.
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 6.830000] eth0: link down
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.760000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.770000] Backport based on wireless-testing.git master-2012-09-07
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.780000] compat.git: wireless-testing.git
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.810000] cfg80211: Calling CRDA to update world regulatory domain
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.810000] cfg80211: World regulatory domain updated:
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.820000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.830000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.830000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.840000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.850000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 8.860000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.090000] usbcore: registered new interface driver usbfs
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.090000] usbcore: registered new interface driver hub
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.100000] usbcore: registered new device driver usb
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: EEPROM regdomain: 0x0
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: EEPROM indicates default country code should be used
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: doing EEPROM country->regdmn map search
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: country maps to regdmn code: 0x3a
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: Country alpha2 being used: US
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.560000] ath: Regpair used: 0x3a
Nov 18 10:42:04 OpenWrt kern.debug kernel: [ 9.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.570000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.580000] cfg80211: Calling CRDA for country: US
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.580000] cfg80211: Regulatory domain changed to country: US
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.600000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.610000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.620000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.630000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 9.990000] ehci-platform ehci-platform: Generic Platform EHCI Controller
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.000000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.040000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.060000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.060000] hub 1-0:1.0: USB hub found
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.070000] hub 1-0:1.0: 1 port detected
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.090000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.290000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.410000] usbcore: registered new interface driver usbserial
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.410000] USB Serial support registered for generic
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.440000] usb 1-1: new full-speed USB device number 2 using ehci-platform
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.600000] usbcore: registered new interface driver usbserial_generic
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.610000] usbserial: USB Serial Driver core
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.630000] USB Serial support registered for FTDI USB Serial Device
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.640000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.640000] usb 1-1: Detected FT232RL
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.650000] usb 1-1: Number of endpoints 2
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.650000] usb 1-1: Endpoint 1 MaxPacketSize 16384
Nov 18 10:42:04 OpenWrt kern.info kernel: [ 10.660000] usb 1-1: Endpoint 2 MaxPacketSize 16384
Nov 18 10:42:05 OpenWrt kern.debug kernel: [ 13.460000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Nov 18 10:42:05 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Nov 18 10:42:05 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Nov 18 10:42:05 OpenWrt daemon.notice netifd: wan (620): udhcpc (v1.19.4) started
Nov 18 10:42:06 OpenWrt daemon.notice netifd: wan (620): Sending discover...
Nov 18 10:42:06 OpenWrt kern.info kernel: [ 13.760000] eth0: link up (1000Mbps/Full duplex)
Nov 18 10:42:06 OpenWrt kern.info kernel: [ 13.770000] device eth0.1 entered promiscuous mode
Nov 18 10:42:06 OpenWrt kern.info kernel: [ 13.770000] device eth0 entered promiscuous mode
Nov 18 10:42:06 OpenWrt kern.info kernel: [ 13.800000] br-lan: port 1(eth0.1) entered forwarding state
Nov 18 10:42:06 OpenWrt kern.info kernel: [ 13.800000] br-lan: port 1(eth0.1) entered forwarding state
Nov 18 10:42:06 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Nov 18 10:42:07 OpenWrt kern.info kernel: [ 15.800000] br-lan: port 1(eth0.1) entered forwarding state
Nov 18 10:42:09 OpenWrt daemon.notice netifd: wan (620): Sending discover...
Nov 18 10:42:09 OpenWrt daemon.notice netifd: wan (620): Sending select for 95.222.63.70...
Nov 18 10:42:09 OpenWrt kern.info kernel: [ 17.710000] device wlan0 entered promiscuous mode
Nov 18 10:42:09 OpenWrt daemon.notice netifd: wan (620): Lease of 95.222.63.70 obtained, lease time 1870
Nov 18 10:42:09 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Nov 18 10:42:09 OpenWrt daemon.notice netifd: Interface 'wan' is now up
Nov 18 10:42:10 OpenWrt kern.info kernel: [ 18.710000] br-lan: port 2(wlan0) entered forwarding state
Nov 18 10:42:10 OpenWrt kern.info kernel: [ 18.710000] br-lan: port 2(wlan0) entered forwarding state
Nov 18 10:42:11 OpenWrt user.notice ifup: Allowing Router Advertisements on wan (eth0.2)
Nov 18 10:42:12 OpenWrt kern.info kernel: [ 20.710000] br-lan: port 2(wlan0) entered forwarding state
Nov 18 10:42:14 OpenWrt user.info sysinit: Loading defaults
Nov 18 10:42:14 OpenWrt user.info sysinit: Loading synflood protection
Nov 18 10:42:14 OpenWrt user.info sysinit: Adding custom chains
Nov 18 10:42:15 OpenWrt user.info sysinit: Loading zones
Nov 18 10:42:16 OpenWrt user.info sysinit: Loading forwardings
Nov 18 10:42:16 OpenWrt user.info sysinit: Loading rules
Nov 18 10:42:16 OpenWrt user.info sysinit: Loading redirects
Nov 18 10:42:16 OpenWrt user.info sysinit: Loading includes
Nov 18 10:42:16 OpenWrt user.info sysinit: Optimizing conntrack
Nov 18 10:42:16 OpenWrt user.info sysinit: Loading interfaces
Nov 18 10:42:16 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Nov 18 10:42:17 OpenWrt user.info firewall: adding wan (eth0.2) to zone wan
Nov 18 10:42:19 OpenWrt authpriv.info dropbear[1602]: Running in background
Nov 18 10:42:21 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Nov 18 10:42:21 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: started, version 2.62 cachesize 150
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq-dhcp[1653]: DHCP, IP range 192.168.0.100 -- 192.168.0.249, lease time 12h
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: using local addresses only for domain lan
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: reading /tmp/resolv.conf.auto
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: using nameserver 80.69.100.182#53
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: using nameserver 80.69.100.174#53
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: using local addresses only for domain lan
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq[1653]: read /etc/hosts - 1 addresses
Nov 18 10:42:24 OpenWrt daemon.info dnsmasq-dhcp[1653]: read /etc/ethers - 0 addresses
Nov 18 10:42:24 OpenWrt user.info sysinit: setting up led USB
Nov 18 10:42:24 OpenWrt user.info sysinit: setting up led WLAN
Nov 18 10:42:25 OpenWrt user.info sysinit: tail: can't open '/tmp/oscam.log': No such file or directory
Nov 18 10:42:25 OpenWrt user.info sysinit: tail: no files
Nov 18 10:42:25 OpenWrt user.info sysinit: Oscam wird gestartet!
Nov 18 10:42:28 OpenWrt user.info sysinit: Oscam wurde erfolgreich gestartet!
Nov 18 10:42:28 OpenWrt user.notice root: Oscam wurde erfolgreich gestartet!
Nov 18 10:42:28 OpenWrt user.info sysinit: Watchdog: Watchdog ist deaktiviert in /etc/config/oscam/oscam.watchdog. ( watchdog = 1 zum aktivieren )
Nov 18 10:42:28 OpenWrt user.notice root: Watchdog: Watchdog ist deaktiviert in /etc/config/oscam/oscam.watchdog. ( watchdog = 1 zum aktivieren )
Nov 18 10:43:00 OpenWrt daemon.info hostapd: wlan0: STA 04:f7:e4:ca:24:f0 IEEE 802.11: authenticated
Nov 18 10:43:00 OpenWrt daemon.info hostapd: wlan0: STA 04:f7:e4:ca:24:f0 IEEE 802.11: associated (aid 1)
Nov 18 10:43:00 OpenWrt daemon.info hostapd: wlan0: STA 04:f7:e4:ca:24:f0 WPA: pairwise key handshake completed (RSN)
Nov 18 10:43:00 OpenWrt daemon.info dnsmasq-dhcp[1653]: DHCPREQUEST(br-lan) 192.168.0.162 04:f7:e4:ca:24:f0
Nov 18 10:43:00 OpenWrt daemon.info dnsmasq-dhcp[1653]: DHCPACK(br-lan) 192.168.0.162 04:f7:e4:ca:24:f0 Yvonnes-iPhone
Nov 18 10:43:27 OpenWrt daemon.info hostapd: wlan0: STA 98:b8:e3:66:5b:35 IEEE 802.11: authenticated
Nov 18 10:43:27 OpenWrt daemon.info hostapd: wlan0: STA 98:b8:e3:66:5b:35 IEEE 802.11: associated (aid 2)
Nov 18 10:43:27 OpenWrt daemon.info hostapd: wlan0: STA 98:b8:e3:66:5b:35 WPA: pairwise key handshake completed (RSN)
Nov 18 10:43:27 OpenWrt daemon.info dnsmasq-dhcp[1653]: DHCPREQUEST(br-lan) 192.168.0.151 98:b8:e3:66:5b:35
Nov 18 10:43:27 OpenWrt daemon.info dnsmasq-dhcp[1653]: DHCPACK(br-lan) 192.168.0.151 98:b8:e3:66:5b:35 Zottels-iPhone

Kernelprotokol

Spoiler

[ 0.000000] Linux version 3.3.8 (derdigge@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #25 Sat Nov 17 11:24:44 CET 2012
[ 0.000000] MyLoader: sysp=aaaaaaa2, boardp=aaaaaaaa, parts=aaaaaaaa
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9132 rev 2
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00002000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00002000
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802ef060, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 29008k/32768k available (2208k kernel code, 3760k reserved, 413k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 21 on device: ath79
[ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND
[ 0.360000] bio: create slab <bio-0> at 0
[ 0.370000] Switching to clocksource MIPS
[ 0.380000] NET: Registered protocol family 2
[ 0.380000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.380000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.390000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.400000] TCP reno registered
[ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] NET: Registered protocol family 1
[ 0.420000] PCI: CLS 0 bytes, default 32
[ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.440000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.450000] msgmni has been set to 56
[ 0.460000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.470000] io scheduler noop registered
[ 0.470000] io scheduler deadline registered (default)
[ 0.470000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.510000] console [ttyS0] enabled, bootconsole disabled
[ 0.530000] m25p80 spi0.0: found s25sl064a, expected m25p80
[ 0.530000] m25p80 spi0.0: s25sl064a (8192 Kbytes)
[ 0.540000] 5 tp-link partitions found on MTD device spi0.0
[ 0.540000] Creating 5 MTD partitions on "spi0.0":
[ 0.550000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.560000] 0x000000020000-0x00000010b800 : "kernel"
[ 0.560000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.570000] 0x00000010b800-0x0000007f0000 : "rootfs"
[ 0.580000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.590000] mtd: partition "rootfs" set to be root filesystem
[ 0.600000] mtd: partition "rootfs_data" created automatically, ofs=3C0000, len=430000
[ 0.610000] 0x0000003c0000-0x0000007f0000 : "rootfs_data"
[ 0.620000] 0x0000007f0000-0x000000800000 : "art"
[ 0.620000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.630000] Realtek RTL8366RB ethernet switch driver version 0.2.3
[ 0.750000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
[ 0.750000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
[ 0.930000] rtl8366rb: probed
[ 0.940000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.240000] TCP cubic registered
[ 1.250000] NET: Registered protocol family 17
[ 1.250000] Bridge firewalling registered
[ 1.260000] 8021q: 802.1Q VLAN Support v1.8
[ 1.270000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.270000] Freeing unused kernel memory: 212k freed
[ 3.340000] ar71xx: pll_reg 0xb8050014: 0x1a000000
[ 3.340000] eth0: link up (1000Mbps/Full duplex)
[ 3.370000] Registered led device: tp-link:green:usb
[ 3.370000] Registered led device: tp-link:green:system
[ 3.370000] Registered led device: tp-link:green:qss
[ 3.370000] Registered led device: tp-link:green:wlan
[ 6.650000] JFFS2 notice: (437) jffs2_build_xattr_subsystem: complete building xattr subsystem, 22 of xdatum (0 unchecked, 21 orphan) and 31 of xref (0 dead, 21 orphan) found.
[ 6.830000] eth0: link down
[ 8.760000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 8.770000] Backport based on wireless-testing.git master-2012-09-07
[ 8.780000] compat.git: wireless-testing.git
[ 8.810000] cfg80211: Calling CRDA to update world regulatory domain
[ 8.810000] cfg80211: World regulatory domain updated:
[ 8.820000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.830000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.830000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.840000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.850000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.860000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.090000] usbcore: registered new interface driver usbfs
[ 9.090000] usbcore: registered new interface driver hub
[ 9.100000] usbcore: registered new device driver usb
[ 9.560000] ath: EEPROM regdomain: 0x0
[ 9.560000] ath: EEPROM indicates default country code should be used
[ 9.560000] ath: doing EEPROM country->regdmn map search
[ 9.560000] ath: country maps to regdmn code: 0x3a
[ 9.560000] ath: Country alpha2 being used: US
[ 9.560000] ath: Regpair used: 0x3a
[ 9.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.570000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
[ 9.580000] cfg80211: Calling CRDA for country: US
[ 9.580000] cfg80211: Regulatory domain changed to country: US
[ 9.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 9.600000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 9.610000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.620000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.630000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 9.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.990000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 10.000000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.040000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 10.060000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 10.060000] hub 1-0:1.0: USB hub found
[ 10.070000] hub 1-0:1.0: 1 port detected
[ 10.090000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
[ 10.290000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.410000] usbcore: registered new interface driver usbserial
[ 10.410000] USB Serial support registered for generic
[ 10.440000] usb 1-1: new full-speed USB device number 2 using ehci-platform
[ 10.600000] usbcore: registered new interface driver usbserial_generic
[ 10.610000] usbserial: USB Serial Driver core
[ 10.630000] USB Serial support registered for FTDI USB Serial Device
[ 10.640000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 10.640000] usb 1-1: Detected FT232RL
[ 10.650000] usb 1-1: Number of endpoints 2
[ 10.650000] usb 1-1: Endpoint 1 MaxPacketSize 16384
[ 10.660000] usb 1-1: Endpoint 2 MaxPacketSize 16384
[ 10.660000] usb 1-1: Setting MaxPacketSize 64
[ 10.670000] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 10.680000] usbcore: registered new interface driver ftdi_sio
[ 10.680000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 13.460000] ar71xx: pll_reg 0xb8050014: 0x1a000000
[ 13.760000] eth0: link up (1000Mbps/Full duplex)
[ 13.770000] device eth0.1 entered promiscuous mode
[ 13.770000] device eth0 entered promiscuous mode
[ 13.800000] br-lan: port 1(eth0.1) entered forwarding state
[ 13.800000] br-lan: port 1(eth0.1) entered forwarding state
[ 15.800000] br-lan: port 1(eth0.1) entered forwarding state
[ 17.710000] device wlan0 entered promiscuous mode
[ 18.710000] br-lan: port 2(wlan0) entered forwarding state
[ 18.710000] br-lan: port 2(wlan0) entered forwarding state
[ 20.710000] br-lan: port 2(wlan0) entered forwarding state

Oscam.log

Spoiler

WATCHDOG KILLED Oscam
2012/11/18 10:42:26 0 s starting thread log_list_thread
2012/11/18 10:42:26 0 s log_list_thread thread started

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Nov 18 10:42:26 2012
-------------------------------------------------------------------------------
2012/11/18 10:42:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mips-openwrt-linux-uclibc-ssl-libusb-pcsc)
2012/11/18 10:42:26 0 s version=1.20-unstable_svn, build #7936, system=mips-openwrt-linux-uclibc-ssl-libusb-pcsc, nice=-1
2012/11/18 10:42:26 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/11/18 10:42:26 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2012/11/18 10:42:26 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/18 10:42:26 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2012/11/18 10:42:26 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2012/11/18 10:42:26 0 s signal handling initialized (type=sysv)
2012/11/18 10:42:26 0 s oscam.srvid loading failed, old format
2012/11/18 10:42:26 0 s oscam.tiers loading failed
2012/11/18 10:42:26 0 s oscam.provid loading failed, wrong format?
2012/11/18 10:42:26 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.guess" (errno=2 No such file or directory)
2012/11/18 10:42:26 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.ird" (errno=2 No such file or directory)
2012/11/18 10:42:26 0 s 0 entries read from oscam.whitelist
2012/11/18 10:42:26 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.cacheex" (errno=2 No such file or directory)
2012/11/18 10:42:26 0 s Starting listener 0
2012/11/18 10:42:26 0 s camd35: disabled
2012/11/18 10:42:26 0 s Starting listener 0
2012/11/18 10:42:26 0 s cs378x: disabled
2012/11/18 10:42:26 0 s Starting listener 0
2012/11/18 10:42:26 0 s newcamd: initialized (fd=5, port=50001, ip=192.168.0.1, crypted)
2012/11/18 10:42:26 0 s -> CAID: 09C4 PROVID: 000000
2012/11/18 10:42:26 0 s Starting listener 0
2012/11/18 10:42:26 0 s cccam: initialized (fd=6, port=12500, ip=192.168.0.1, crypted)
2012/11/18 10:42:26 0 s Starting listener 0
2012/11/18 10:42:26 0 s csp: disabled
2012/11/18 10:42:26 0 s starting thread http
2012/11/18 10:42:26 0 s http thread started
2012/11/18 10:42:26 0 s starting thread reader check
2012/11/18 10:42:26 0 s reader check thread started
2012/11/18 10:42:26 0 s starting thread check
2012/11/18 10:42:26 0 s check thread started
2012/11/18 10:42:26 0 s v13 [mouse] creating thread for device /dev/ttyUSB0
2012/11/18 10:42:26 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/11/18 10:42:26 0 s waiting for local card init
2012/11/18 10:42:26 731548 h HTTP Server listening on port 6520
2012/11/18 10:42:26 72FD00 r v13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/11/18 10:42:27 72FD00 r v13 [mouse] card detected
2012/11/18 10:42:28 72FD00 r v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/11/18 10:42:28 72FD00 r v13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2012/11/18 10:42:28 72FD00 r v13 [mouse] Calculated work ETU is 104.20 us
2012/11/18 10:42:28 72FD00 r v13 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/11/18 10:42:29 72FD00 r v13 [mouse] Card type: P1TV
2012/11/18 10:42:29 72FD00 r v13 [mouse] Rom version: 10A7
2012/11/18 10:42:30 72FD00 r v13 [mouse] parental lock setting: FF FF FF FF
2012/11/18 10:42:30 72FD00 r v13 [mouse] type: VideoGuard Sky Germany (09C4), caid: 09C4
2012/11/18 10:42:30 72FD00 r v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/11/18 10:42:30 72FD00 r v13 [mouse] ready for requests
2012/11/18 10:42:30 72FD00 r v13 [mouse] found card system videoguard2
2012/11/18 10:42:30 72FD00 r v13 [videoguard2] card detected
2012/11/18 10:42:30 72FD00 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2012/11/18 10:43:02 72FD00 r v13 [videoguard2] tier: 0046, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:02 72FD00 r v13 [videoguard2] tier: 005a, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:02 72FD00 r v13 [videoguard2] tier: 007b, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:02 72FD00 r v13 [videoguard2] tier: 007d, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 0081, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 008e, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00c0, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00c7, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00c8, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00c9, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00ca, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00cb, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00f3, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00fa, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:03 72FD00 r v13 [videoguard2] tier: 00ff, expiry date: 2012/11/17-00:01:00
2012/11/18 10:43:12 0 s init for all local cards done
2012/11/18 10:43:12 0 s anti cascading disabled
2012/11/18 10:43:12 749AE8 c encrypted cccam-client 192.168.0.117 granted (uno, au=off)
2012/11/18 10:43:12 74B330 c encrypted cccam-client 192.168.0.154 granted (user, au=off)
2012/11/18 10:43:12 7482A0 c anonymous disconnected from xxxxxxxxxxxxx
2012/11/18 10:43:12 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:43:12 745210 c anonymous disconnected from 192.168.0.154
2012/11/18 10:43:12 7439C8 c anonymous disconnected from xxxxxxxxxxxxx
2012/11/18 10:43:12 742180 c anonymous disconnected from 192.168.0.117
2012/11/18 10:43:12 740938 c anonymous disconnected from 192.168.0.154
2012/11/18 10:43:12 73F0F0 c anonymous disconnected from xxxxxxxxxxxxxx
2012/11/18 10:43:14 75BEA0 c encrypted cccam-client 88.76.170.119 granted (kevin, au=off)
2012/11/18 10:43:14 72FD00 r v13 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/18 10:43:14 74B330 c starting thread housekeeping lb stats
2012/11/18 10:43:14 74B330 c housekeeping lb stats thread started
2012/11/18 10:43:14 74B330 c user (09C4&000000/0000/0076/B3:02AF): not found (497 ms) by v13
2012/11/18 10:43:16 74B330 c user (09C4&000000/0000/0076/B3:02AF): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:18 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:43:18 72FD00 r v13 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/11/18 10:43:18 749AE8 c uno (09C4&000000/0000/EF75/B3:CE4E): not found (472 ms) by v13
2012/11/18 10:43:19 74B330 c user (09C4&000000/0000/0076/B39D1): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:25 0 --- Skipped 7 duplicated log lines ---
2012/11/18 10:43:25 74B330 c user (09C4&000000/0000/0076/B3:8578): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:32 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:43:32 74B330 c user (09C4&000000/0000/0076/B3:C33D): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:41 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:43:41 74B330 c user (09C4&000000/0000/0076/B3:291C): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:52 74B330 c user (09C4&000000/0000/0076/B3:E144): rejected group (1 ms) (no matching reader)
2012/11/18 10:43:53 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:43:53 74B330 c user (09C4&000000/0000/0076/B3:5C24): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:01 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:44:01 74B330 c user (09C4&000000/0000/0076/B3:8F51): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:07 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:44:07 74B330 c user (09C4&000000/0000/0076/B3:8290): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:16 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:44:16 74B330 c user (09C4&000000/0000/0076/B3:762D): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:18 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:44:18 749AE8 c uno (09C4&000000/0000/EF75/B3:9123): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:19 74B330 c user (09C4&000000/0000/0076/B3:762D): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:22 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:44:22 74B330 c user (09C4&000000/0000/0076/B3:C3B1): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:25 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:44:25 749AE8 c uno (09C4&000000/0000/EF75/B3:2892): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:25 74B330 c user (09C4&000000/0000/0076/B3:C3B1): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:29 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:44:29 74B330 c user (09C4&000000/0000/0076/B3:ABCD): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:32 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:44:32 749AE8 c uno (09C4&000000/0000/EF75/B3:695D): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:33 74B330 c user (09C4&000000/0000/0076/B3:ABCD): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:36 74B330 c user (09C4&000000/0000/0076/B3:E9C9): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:42 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:44:42 74B330 c user (09C4&000000/0000/0076/B3:71AD): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:49 0 --- Skipped 5 duplicated log lines ---
2012/11/18 10:44:49 74B330 c user (09C4&000000/0000/0076/B3:96B2): rejected group (1 ms) (no matching reader)
2012/11/18 10:44:57 0 --- Skipped 7 duplicated log lines ---
2012/11/18 10:44:57 74B330 c user (09C4&000000/0000/0076/B3:8C51): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:03 0 --- Skipped 6 duplicated log lines ---
2012/11/18 10:45:03 74B330 c user (09C4&000000/0000/0076/B3:2B80): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:10 0 --- Skipped 6 duplicated log lines ---
2012/11/18 10:45:10 74B330 c user (09C4&000000/0000/0076/B3:B0C0): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:17 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:45:17 74B330 c user (09C4&000000/0000/0076/B3:7F55): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:25 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:45:25 74B330 c user (09C4&000000/0000/0076/B3:F1D7): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:31 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:45:31 74B330 c user (09C4&000000/0000/0076/B3:CC15): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:38 0 --- Skipped 5 duplicated log lines ---
2012/11/18 10:45:38 74B330 c user (09C4&000000/0000/0076/B3:450A): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:45 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:45:45 74B330 c user (09C4&000000/0000/0076/B3:9C9B): rejected group (1 ms) (no matching reader)
2012/11/18 10:45:54 0 --- Skipped 6 duplicated log lines ---
2012/11/18 10:45:54 74B330 c user (09C4&000000/0000/0076/B3:99E4): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:01 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:46:01 74B330 c user (09C4&000000/0000/0076/B3:2EC5): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:08 0 --- Skipped 1 duplicated log lines ---
2012/11/18 10:46:08 74B330 c user (09C4&000000/0000/0076/B3:7B57): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:08 749AE8 c uno (09C4&000000/0000/EF75/B3:AA22): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:09 74B330 c user (09C4&000000/0000/0076/B3:7B57): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:13 74B330 c user (09C4&000000/0000/0076/B3:3C9E): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:21 0 --- Skipped 6 duplicated log lines ---
2012/11/18 10:46:21 74B330 c user (09C4&000000/0000/0076/B3:C2E8): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:27 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:46:27 74B330 c user (09C4&000000/0000/0076/B3:2975): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:35 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:46:35 74B330 c user (09C4&000000/0000/0076/B3:BA70): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:44 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:46:44 74B330 c user (09C4&000000/0000/0076/B3:1EF1): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:50 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:46:50 74B330 c user (09C4&000000/0000/0076/B3:E7F5): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:57 0 --- Skipped 6 duplicated log lines ---
2012/11/18 10:46:57 74B330 c user (09C4&000000/0000/0076/B3:32F2): rejected group (1 ms) (no matching reader)
2012/11/18 10:46:59 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:46:59 749AE8 c uno (09C4&000000/0000/EF75/B3:FFB0): rejected group (1 ms) (no matching reader)
2012/11/18 10:47:00 74B330 c user (09C4&000000/0000/0076/B3:32F2): rejected group (1 ms) (no matching reader)
2012/11/18 10:47:02 0 --- Skipped 3 duplicated log lines ---
2012/11/18 10:47:02 74B330 c user (09C4&000000/0000/0076/B3:C662): rejected group (1 ms) (no matching reader)
2012/11/18 10:47:06 0 --- Skipped 4 duplicated log lines ---
2012/11/18 10:47:06 749AE8 c uno (09C4&000000/0000/EF75/B3:B8E7): rejected group (1 ms) (no matching reader)
2012/11/18 10:47:07 74B330 c user (09C4&000000/0000/0076/B3:C662): rejected group (1 ms) (no matching reader)
2012/11/18 10:47:10 0 --- Skipped 2 duplicated log lines ---
2012/11/18 10:47:10 74B330 c user (09C4&000000/0000/0076/B3:05C0): rejected group (1 ms) (no matching reader)

Oscam Config

Spoiler

[global]
serverip = 192.168.0.1
usrfile =
mailfile =
logfile = /tmp/oscam.log;stdout
cwlogdir =
emmlogdir =
disablelog = 0
disableuserfile = 1
disablemail = 1
loghistorysize = 4096
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 360
failbancount = 3
cachedelay = 0
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = -1
serialreadertimeout = 1500
suppresscmd08 = 0
maxlogsize = 512
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
dropdups = 0
lb_mode = 1
lb_save = 150
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_savepath =
lb_stat_cleanup = 336
lb_use_locking = 0
lb_reopen_mode = 0
lb_max_readers = 0
lb_auto_betatunnel = 1
resolvegethostbyname = 0

[webif]
HttpPort = xxxx
HttpUser = xxxxxxxxxxxxxxxxx
HttpPWD = xxxxxxxxxxxxxxxxx
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.0.255
HttpReadOnly = 0
httphelplang = de

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi

[newcamd]
Key = 0102030405060708091011121314
Port = 50001@09C4:000000

[cccam]
Port = xxxxxx
Reshare = 2
keepconnected = 1
Ignorereshare = 0
Version = 2.2.1
Stealth = 0

Oscam Server

Spoiler

[reader]
label = v13
enable = 1
protocol = mouse
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = sky
smargopatch = 1
caid = 09C4
boxid = 12345678
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
lb_weight = 100
deprecated = 1
auprovid = 000001
#ins7e11 = 15
ndsversion = 2

Oscam.user

Spoiler

[account]
user = usersky
pwd = passsky
disabled = 0
expdate =
allowedtimeframe =
group = 1
#hostname = brummi-zottel.no-ip.org
uniq = 0
sleep = 0
monlevel = 2
au = 1
services = skyall,hdplus_v13
caid =
betatunnel =
ident =
chid =
suppresscmd08 = 0
cccmaxhops = 1
cccreshare = 2
sleepsend = 0
failban = 0
keepalive = 1
numusers = 0
penalty = 0

[account]
user = user
pwd = pass
group = 1
au = sky
caid = 09C4

[account]
user = uno
pwd = uno
group = 1
au = sky
caid = 09C4

Hoffe ich habe jetzt alles.

Gruß
Zottel

 

[derdigge]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

du hast nen smargo nehme ich an?

Falls ja ist deine oscam.server - totaly gay

Spoiler

[reader]
label = v13
enable = 1
protocol = mouse < ändern - RTFM -

Sie müssen registriert sein, um Links zu sehen.

device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = sky
smargopatch = 1 < raus damit
caid = 09C4
boxid = 12345678
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
lb_weight = 100
deprecated = 1
auprovid = 000001
#ins7e11 = 15
ndsversion = 2

 

[robberburn]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

versuch mal das Ganze ohne Services

nagra_read raus ist ne NDS Karte

 

[zottel-1977]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

Sorry vergessen bei zu schreiben, habe ne Easymouse2

 

[robberburn]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

oscam.server


[reader]
label = V13
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
ndsversion = 2

 

[zottel-1977]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

Hallo @ robberburn

Hat leider nichts gebracht

 

[robberburn]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum &quot;Gleichessen&quot;

Check mal die Dip-Schalter an der Easymouse2

[TABLE="class: wikitable sortable jquery-tablesorter"]
[TR]
[TD]V13 [/TD]
[TD] 3,3[/TD]
[TD] phoenix[/TD]
[TD] 3.58[/TD]
[/TR]
[/TABLE]



Mach mal user account erstmal alle so

[account]
user = username
pwd = password
group = 1
caid = 09C4

- - - Aktualisiert - - -

und dann mal oscam neustarten und logfile posten

 

[robberburn]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

die oscam hat keinen dvbapi support

 

[zottel-1977]

AW: OScam für etliche Router mit USB port, fix und fertig verpackt! Zum "Gleichessen"

Hab nochmal ne frage dazu.

In der Oscam.log steht ja, da er die karte erkannt hat. Ich bin jetzt einfach mal hingegangen und habe die Karte in meinem VU+ Uno gesteckt und da habe ich auch kein Bild bekommen. Da ich aber den Original Receiver nicht habe, steht beim schwager, kann ich nicht schauen, ob die vielleicht, die freischaltung deaktiviert haben. kann ich mir auch auf dem Uno eine freischaltung schicken lassen?

Hier der Oscam.logfile nach änderung und neustart

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Nov 18 12:42:14 2012
-------------------------------------------------------------------------------
2012/11/18 12:42:14 0 s starting thread log_list_thread
2012/11/18 12:42:14 0 s log_list_thread thread started
2012/11/18 12:42:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7936 (mips-openwrt-linux-uclibc-ssl-libusb-pcsc)
2012/11/18 12:42:14 0 s version=1.20-unstable_svn, build #7936, system=mips-openwrt-linux-uclibc-ssl-libusb-pcsc, nice=-1
2012/11/18 12:42:14 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/11/18 12:42:14 0 s max. logsize=512 Kb, loghistorysize=4096 bytes
2012/11/18 12:42:14 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/11/18 12:42:14 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2012/11/18 12:42:14 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2012/11/18 12:42:14 0 s signal handling initialized (type=sysv)
2012/11/18 12:42:14 0 s oscam.srvid loading failed, old format
2012/11/18 12:42:14 0 s oscam.tiers loading failed
2012/11/18 12:42:14 0 s oscam.provid loading failed, wrong format?
2012/11/18 12:42:14 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.guess" (errno=2 No such file or directory)
2012/11/18 12:42:14 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.ird" (errno=2 No such file or directory)
2012/11/18 12:42:14 0 s 0 entries read from oscam.whitelist
2012/11/18 12:42:14 0 s ERROR: Cannot open file "/etc/config/oscam/oscam.cacheex" (errno=2 No such file or directory)
2012/11/18 12:42:14 0 s Starting listener 0
2012/11/18 12:42:14 0 s camd35: disabled
2012/11/18 12:42:14 0 s Starting listener 0
2012/11/18 12:42:14 0 s cs378x: disabled
2012/11/18 12:42:14 0 s Starting listener 0
2012/11/18 12:42:14 0 s newcamd: initialized (fd=5, port=50001, ip=192.168.0.1, crypted)
2012/11/18 12:42:14 0 s -> CAID: 09C4 PROVID: 000000
2012/11/18 12:42:14 0 s Starting listener 0
2012/11/18 12:42:14 0 s cccam: initialized (fd=6, port=12500, ip=192.168.0.1, crypted)
2012/11/18 12:42:14 0 s Starting listener 0
2012/11/18 12:42:14 0 s csp: disabled
2012/11/18 12:42:14 0 s starting thread http
2012/11/18 12:42:14 0 s http thread started
2012/11/18 12:42:14 0 s starting thread reader check
2012/11/18 12:42:14 0 s reader check thread started
2012/11/18 12:42:14 0 s starting thread check
2012/11/18 12:42:14 0 s check thread started
2012/11/18 12:42:14 0 s v13 [mouse] creating thread for device /dev/ttyUSB0
2012/11/18 12:42:14 0 s waiting for local card init
2012/11/18 12:42:14 B4DD00 h HTTP Server listening on port 6520
2012/11/18 12:42:14 B4B020 r v13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/11/18 12:42:15 B4B020 r v13 [mouse] card detected
2012/11/18 12:42:17 B4B020 r v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2012/11/18 12:42:17 B4B020 r v13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2012/11/18 12:42:17 B4B020 r v13 [mouse] Setting baudrate to 153600 bps
2012/11/18 12:42:17 B4B020 r v13 [mouse] Calculated work ETU is 6.51 us
2012/11/18 12:42:17 B4B020 r v13 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/11/18 12:42:18 B4B020 r v13 [mouse] Card type: P1TV
2012/11/18 12:42:18 B4B020 r v13 [mouse] Rom version: 10A7
2012/11/18 12:42:18 B4B020 r v13 [mouse] parental lock setting: FF FF FF FF
2012/11/18 12:42:18 B4B020 r v13 [mouse] type: VideoGuard Sky Germany (09C4) FastMode, caid: 09C4
2012/11/18 12:42:18 B4B020 r v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2012/11/18 12:42:18 B4B020 r v13 [mouse] ready for requests
2012/11/18 12:42:18 B4B020 r v13 [mouse] found card system videoguard2
2012/11/18 12:42:18 B4B020 r v13 [videoguard2] card detected
2012/11/18 12:42:18 B4B020 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4) FastMode
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 0046, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 005a, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 007b, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 007d, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 0081, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 008e, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00c0, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00c7, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00c8, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00c9, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00ca, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00cb, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00f3, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00fa, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:19 B4B020 r v13 [videoguard2] tier: 00ff, expiry date: 2012/11/17-00:01:00
2012/11/18 12:42:22 0 s init for all local cards done
2012/11/18 12:42:22 0 s anti cascading disabled
2012/11/18 12:42:22 B612F8 c encrypted cccam-client 192.168.0.117 granted (uno, au=off)
2012/11/18 12:42:22 B5E268 c anonymous disconnected from xxxxxxxxxx
2012/11/18 12:42:22 B62B40 c encrypted cccam-client xxxxxxxxxxxx granted (kevin, au=off)
2012/11/18 12:42:24 B5FAB0 c anonymous disconnected from 192.168.0.154
2012/11/18 12:42:26 B6D8A8 c encrypted cccam-client 192.168.0.154 granted (user, au=off)
2012/11/18 12:42:28 B6D8A8 c user (09C4&000000/0000/000E/B3:3600): rejected group (1 ms) (no matching reader)
2012/11/18 12:42:37 0 --- Skipped 8 duplicated log lines ---
2012/11/18 12:42:37 B6D8A8 c user (09C4&000000/0000/000E/B3:2499): rejected group (1 ms) (no matching reader)
2012/11/18 12:42:42 0 --- Skipped 3 duplicated log lines ---
2012/11/18 12:42:42 B6D8A8 c user (09C4&000000/0000/000E/B3:5EED): rejected group (1 ms) (no matching reader)
2012/11/18 12:42:50 0 --- Skipped 6 duplicated log lines ---
2012/11/18 12:42:50 B6D8A8 c user (09C4&000000/0000/000E/B3:4E58): rejected group (1 ms) (no matching reader)
2012/11/18 12:42:59 0 --- Skipped 1 duplicated log lines ---
2012/11/18 12:42:59 B6D8A8 c user (09C4&000000/0000/000E/B3:7AA1): rejected group (1 ms) (no matching reader)
2012/11/18 12:43:05 0 --- Skipped 1 duplicated log lines ---
2012/11/18 12:43:05 B6D8A8 c user (09C4&000000/0000/000E/B3:1ED1): rejected group (1 ms) (no matching reader)
2012/11/18 12:43:12 0 --- Skipped 4 duplicated log lines ---
2012/11/18 12:43:12 B6D8A8 c user (09C4&000000/0000/000E/B3:657F): rejected group (1 ms) (no matching reader)
2012/11/18 12:43:18 0 --- Skipped 3 duplicated log lines ---
2012/11/18 12:43:18 B6D8A8 c user (09C4&000000/0000/000E/B3:F6A8): rejected group (1 ms) (no matching reader)

 

[robberburn]

AW: OScam für etliche Router mit USB port,

So nun erzähl mal wo und was der Server ist und was die clients, und mit was gelesen wird.

 

[zottel-1977]

AW: OScam für etliche Router mit USB port,

Als Server nutze ich den TP Link WR 1043ND mit dem aktuellen Image vom 16.11.2012. Die Clients sind einmal mein VU+ UNo Receiver und Ariva 102e, mein Lesegerät ist eine Easymouse2 die natürlich an dem Router hängt. hoffe du meints das.