no matching reader

[dummernutzer2]

Hallo,

zu meiner Config

Raspberry PI B+
2x Easymouse

einmal HD01, die läuft mit der Config
die V14 würde ich gern freischalten, allerdings bekomme ich einen "no matching reader"

hier mal meine Configs:

oscam.conf

Spoiler

[global]
logfile = /usr/local/etc/oscam.log
clientmaxidle = 160
nice = -1
maxlogsize = 4000
emmlogdir = /home/pi/emm

[cache]

[cs357x]
port = 12XX5

[cccam]
port = 1XXXX
nodeid = B4F30CDA102B14FC
version = 2.1.4
reshare = 0
reshare_mode = 0

[webif]
httpport = 1234
httpuser = admin
httppwd = oscam
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

oscam.user

Spoiler

[account]
user = user1
pwd = pass1
caid = 098C,1830
au = 1
emmreassembly = 1
group = 1,2

oscam.server

Spoiler

[reader]
label = HDPLUS_DE_HD01
description = HD01
protocol = mouse
device = /dev/HD01
caid = 1830
boxkey = A....C
rsakey = B...5
detect = cd
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1

[reader]
label = V14
description = SkyDE
protocol = mouse
device = /dev/SkyDE
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 2
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

 

[4gx35]

AW: no matching reader

auf jeden fall erst mal emmlogdir zeile ganz entfernen

dann log vom oscam start an posten

 

[Rohrby]

AW: no matching reader

Cardmhz im V14 Reader fehlt

 

[dodo83]

AW: no matching reader

default wert, 357
da httpsavefullcfg auf 0 wird es ausgeblendet

 

[dummernutzer2]

AW: no matching reader

entsprechend abgeändert, allerdings immer noch der gleiche Fehler

Spoiler

2015/05/23 18:08:31 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75201
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [mouse] detect native nagra card
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [mouse] ready for requests
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [mouse] found card system nagra
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] ROM: D N A S P 1 4 2
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] REV: R e v G C 6
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] SER: ############
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] CAID: 1830
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 00 00
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] IRD ID: ############
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] active to: 2015/07/14 12:59
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] |id |tier |valid from |valid to |
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] +----+--------+------------+------------+
2015/05/23 18:08:32 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:08:32 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0064 |2011/01/18 |2012/01/19 |
2015/05/23 18:08:33 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/05/23 18:08:33 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0BEA |2014/09/09 |2015/09/24 |
2015/05/23 18:08:33 1C71E28 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:08:33 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75294
2015/05/23 18:08:34 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75199
2015/05/23 18:08:35 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75272
2015/05/23 18:08:37 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:08:37 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75207
2015/05/23 18:08:38 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75193
2015/05/23 18:08:39 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75196
2015/05/23 18:08:41 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:08:41 1C725E0 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:08:41 1C725E0 r (reader) V14 [mouse] card initializing error
2015/05/23 18:08:42 0 s (main) init for all local cards done
2015/05/23 18:08:42 0 s (emmcache) loaded 39 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
2015/05/23 18:08:42 0 s (emmcache) loaded 39 emmstat records from /tmp/.oscam/oscam.emmstat in 3 ms
2015/05/23 18:08:42 0 s (anticasc) anti cascading disabled
2015/05/23 18:08:42 1C7CE20 c (client) anonymous disconnected from 192.168.2.105
2015/05/23 18:08:47 1C78338 c (client) encrypted cccam-client 192.168.2.105 granted (user1, au=auto (2 reader))
2015/05/23 18:08:53 1C78338 c (ecm) user1 (098C&000000/0C20/006C/98:9.....0): rejected group (0 ms) (no matching reader)
2015/05/23 18:09:00 1C78338 c (ecm) user1 (098C&000000/0C20/006C/98:1......8): rejected group (0 ms) (no matching reader)

 

[dodo83]

AW: no matching reader

wie ist die Easymouse dazu eingestellt überhaupt?

 

[dummernutzer2]

AW: no matching reader

3,3 V Phoenix 3.58

also oben, unten, unten, unten

 

[dodo83]

AW: no matching reader

dann pass die MHZ der Einstellung des Reader an, also

mhz = 357

oder halt die Easymouse auf 6 MHZ einstellen

 

[dummernutzer2]

AW: no matching reader

Hab ich gemacht, Fehler bleibt gleich

 

[dodo83]

AW: no matching reader

was von beiden genau?
log posten ab start der oscam

wie stehen jetzt die Dip Schalter, Config dazu

 

[dummernutzer2]

AW: no matching reader

Bei der Easymouse hab ich die Einstellungen bei behalten und die

oscam.server

Spoiler

[reader]
label = HDPLUS_DE_HD01
description = HD01
protocol = mouse
device = /dev/HD01
caid = 1830
boxkey = A...C
rsakey = B...5
detect = cd
group = 1
emmcache = 1,2,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1

[reader]
label = V14
description = SkyDE
protocol = mouse
device = /dev/SkyDE
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Startlog

Spoiler

2015/05/23 18:48:05 1C71C88 r (reader) HDPLUS_DE_HD01 [mouse] Card responded ok for ifsd request of 251
2015/05/23 18:48:06 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75185
2015/05/23 18:48:06 1C71C88 r (reader) HDPLUS_DE_HD01 [mouse] detect native nagra card
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [mouse] ready for requests
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [mouse] found card system nagra
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] ROM: D N A S P 1 4 2
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] REV: R e v G C 6
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] SER: ############
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] CAID: 1830
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 00 00
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] IRD ID: ############
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] active to: 2015/07/14 12:59
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] |id |tier |valid from |valid to |
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] +----+--------+------------+------------+
2015/05/23 18:48:07 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0064 |2011/01/18 |2012/01/19 |
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0BEA |2014/09/09 |2015/09/24 |
2015/05/23 18:48:07 1C71C88 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:48:08 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75239
2015/05/23 18:48:09 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75203
2015/05/23 18:48:10 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75369
2015/05/23 18:48:11 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:48:12 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75299
2015/05/23 18:48:13 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75285
2015/05/23 18:48:14 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75343
2015/05/23 18:48:15 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:48:16 1C725E0 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:48:16 1C725E0 r (reader) V14 [mouse] card initializing error
2015/05/23 18:48:16 0 s (main) init for all local cards done
2015/05/23 18:48:16 0 s (emmcache) loaded 39 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
2015/05/23 18:48:16 0 s (emmcache) loaded 39 emmstat records from /tmp/.oscam/oscam.emmstat in 3 ms
2015/05/23 18:48:16 0 s (anticasc) anti cascading disabled
2015/05/23 18:48:16 1C7CCF0 c (client) anonymous disconnected from 192.168.2.105
2015/05/23 18:48:22 1C78218 c (client) encrypted cccam-client 192.168.2.105 granted (user1, au=auto (2 reader))
2015/05/23 18:48:27 1C78218 c (ecm) user1 (098C&000000/0C20/006C/98:5.....5): rejected group (1 ms) (no matching reader)

 

[dodo83]

AW: no matching reader

dann stell mal bitte die Easymouse auf:
oben unten oben oben

und im Reader:
mhz = 600

neu starten

 

[dummernutzer2]

AW: no matching reader

Entsprechend umgestellt

log sieht ähnlich aus!

Spoiler

2015/05/23 18:55:04 1C71CF0 r (reader) HDPLUS_DE_HD01 [mouse] Card responded ok for ifsd request of 251
2015/05/23 18:55:04 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75225
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [mouse] detect native nagra card
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [mouse] ready for requests
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [mouse] found card system nagra
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] ROM: D N A S P 1 4 2
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] REV: R e v G C 6
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] SER: ############
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] CAID: 1830
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/05/23 18:55:05 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] Prv.ID: 00 00 00 00
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] IRD ID: ############
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] active to: 2015/07/14 12:59
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] |id |tier |valid from |valid to |
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] +----+--------+------------+------------+
2015/05/23 18:55:06 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0064 |2011/01/18 |2012/01/19 |
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] |8011|0BEA |2014/09/09 |2015/09/24 |
2015/05/23 18:55:06 1C71CF0 r (reader) HDPLUS_DE_HD01 [nagra] -----------------------------------------
2015/05/23 18:55:06 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75363
2015/05/23 18:55:07 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75229
2015/05/23 18:55:09 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75202
2015/05/23 18:55:10 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:55:10 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75358
2015/05/23 18:55:11 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75197
2015/05/23 18:55:13 1C725E0 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75237
2015/05/23 18:55:14 1C725E0 r (reader) V14 [mouse] Error activating card.
2015/05/23 18:55:14 1C725E0 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/23 18:55:14 1C725E0 r (reader) V14 [mouse] card initializing error
2015/05/23 18:55:15 0 s (main) init for all local cards done
2015/05/23 18:55:15 0 s (emmcache) loaded 39 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
2015/05/23 18:55:15 0 s (emmcache) loaded 39 emmstat records from /tmp/.oscam/oscam.emmstat in 3 ms
2015/05/23 18:55:15 0 s (anticasc) anti cascading disabled
2015/05/23 18:55:15 1C7DF38 c (client) anonymous disconnected from 192.168.2.105
2015/05/23 18:55:20 1C78658 c (client) encrypted cccam-client 192.168.2.105 granted (user1, au=auto (2 reader))
2015/05/23 18:55:21 1C78658 c (ecm) user1 (098C&000000/0C20/006C/98:C...3): rejected group (0 ms) (no matching reader)

- - - - - - - - - -

hab CardMhz auch auf 600 gestellt jetzt wieder auf 357 und es läuft! DANKE

wo speichert der Raspberry jetzt das EMM-Log?

 

[dodo83]

AW: no matching reader

im Config Ordner wenn nichts unter EMMLOGDIR steht

 

[Rohrby]

AW: no matching reader

emmlogdir = /home/pi/emm
Normal hier aber ich glaube das passt nicht richtig. Schau mal ob dort die Datei erstellt wird ansonsten lösch die Zeile raus und starte neu. Dann wird die Datei dort hin geschrieben wo deine configs liegen