Risolto mgcam e schermo nero

Dieses Thema im Forum "Altri" wurde erstellt von jimmypage, 25. Oktober 2013.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    ciao a tutti

    ho installato la mgcamd 1.38 sul mio azbox,
    parte tranquillamente, si connette al mio server casalingo, ma ho schermo nero,
    eppure dalle info risulta attiva e sta decodificando, anche dal server risulta attiva.

    dato che è la prima volta che uso mgcamd giusto per provare ho messo queste config che ho trovato in rete;
    mg.cfg
    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 02 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 01 } 0x12c0

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    # 32 cccamd netclient, card list saved as /tmp/cccamd.info
    # (ECM only, supported server version up to 2.1.1, later not work)
    G: { 33 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 05 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 04 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-******
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    # 08 stapi/kathrein
    # 09 stapi/ipbox
    # 11 stapi/openbox
    B: { 00 }

    # map all 180x nagra caids to 1801
    # default is 01
    F: { 00 }

    newcamd.list
    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000
    CWS = mio dns 51500 user passy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1

    ps.
    ho rpovato a cambiare G: { 33 } in G: { 01 } ma stesso risultato
     
    Zuletzt bearbeitet: 25. Oktober 2013
    #1
  2. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.240
    Punkte für Erfolge:
    113
    AW: mgcam e schermo nero

    Prova a mettere cosi: CWS = mio dns 51500 user passy 0102030405060708091011121314 lan server1
     
    #2
  3. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: mgcam e schermo nero

    grazie meister sempre puntuale.
    purtroppo il problema non si è risolto.
    ho provato anche con una cline, ma stessa cosa, è in linea gli ecm salgono ma non ho visione.
     
    #3
  4. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.240
    Punkte für Erfolge:
    113
    AW: mgcam e schermo nero

    Prova a mettere questa config:

    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 03 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 00 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    # 32 cccamd netclient, card list saved as /tmp/cccamd.info
    # (ECM only, supported server version up to 2.1.1, later not work)
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 06 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 02 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } root newcs

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 07 } 127.0.0.1 28007 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 01 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-******
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    # 08 stapi/kathrein
    # 09 stapi/ipbox
    # 11 stapi/openbox
    B: { 06 }

    # map all 180x nagra caids to 1801
    # default is 01
    F: { 00 }
     
    #4
  5. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: mgcam e schermo nero

    si meister questa configurazione va benissimo, grazie.
     
    #5
Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.