michisa8688
Ist oft hier
- Registriert
- 19. Juli 2014
- Beiträge
- 169
- Reaktionspunkte
- 4
- Punkte
- 38
Hallo, habe das gleiche Problem mit dem Fastmode. Meine Zeiten sind bei 190ms und somit viel zu hoch. Habe mir jetzt ne Easymouse2 geholt. Jetzt die Frage was muss ich alles ändern bei meinen Oscam configs damit die Karte über Usb eingang der eco+ erkannt wird?
Hier meine configs
oscam.server
oscam.conf
oscam.dvbapi
oscam.user
oscam.version
Und auf der Easymouse sind noch drei Kippschalter mit Volteinstellung usw. Welche einstellungen müssen da eingeschaltet werden.
Danke
Hab mal meine oscam.server so angepasst.
Die Easymouse hat er glaube ich gefunden nur wird die Karte nicht gefunden. Hier mal ein logauszug
was läuft da schief?
Hier meine configs
oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9848
# Read more:
[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00
oscam.conf
[global]
logfile = /var/log/oscam.log
usrfileflag = 1
maxlogsize = 4096
[cache]
[cccam]
port = *****
nodeid = B3B7F99110D6160E
version = 2.3.0
reshare = 0
[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
logfile = /var/log/oscam.log
usrfileflag = 1
maxlogsize = 4096
[cache]
[cccam]
port = *****
nodeid = B3B7F99110D6160E
version = 2.3.0
reshare = 0
[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
oscam.dvbapi
P: 0D05
P: 098C
I: 0
P: 098C
I: 0
oscam.user
[account]
user = lokal
au = V14
group = 1
[account]
user = User1
pwd = ********
au = V14
group = 1
user = lokal
au = V14
group = 1
[account]
user = User1
pwd = ********
au = V14
group = 1
oscam.version
Unix starttime: 1418222819
Starttime: 10.12.2014 15:46:59
Version: oscam-1.20-unstable_svn-r9848
Compiler: mipsel-unknown-linux-gnu-libusb
ConfigDir: /usr/keys/oscam_emu/
Web interface support: yes
LiveLog support: yes
jQuery support intern: no
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: no
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
serial: no
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stinger: no
Starttime: 10.12.2014 15:46:59
Version: oscam-1.20-unstable_svn-r9848
Compiler: mipsel-unknown-linux-gnu-libusb
ConfigDir: /usr/keys/oscam_emu/
Web interface support: yes
LiveLog support: yes
jQuery support intern: no
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: no
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
serial: no
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stinger: no
Und auf der Easymouse sind noch drei Kippschalter mit Volteinstellung usw. Welche einstellungen müssen da eingeschaltet werden.
Danke
Hab mal meine oscam.server so angepasst.
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9848
# Read more:
[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00
Die Easymouse hat er glaube ich gefunden nur wird die Karte nicht gefunden. Hier mal ein logauszug
2014/12/17 19:24:10 77700468 h V14 [mouse] Restarting reader
2014/12/17 19:24:10 77700468 h V14 [mouse] creating thread for device /dev/ttyUSB0
2014/12/17 19:24:10 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:10 77907560 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/12/17 19:24:10 54F1E0 c encrypted cccam-client **.**.**.**granted (User1, au=on (1 reader))
2014/12/17 19:24:10 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:12 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:12 54F1E0 c User1 (098C&000000/0C1F/0069/98:C3C846EFADECE0A904856D1CBB884746): rejected group (0 ms) (no matching reader)
2014/12/17 19:24:10 77700468 h V14 [mouse] creating thread for device /dev/ttyUSB0
2014/12/17 19:24:10 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:10 77907560 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/12/17 19:24:10 54F1E0 c encrypted cccam-client **.**.**.**granted (User1, au=on (1 reader))
2014/12/17 19:24:10 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:11 538990 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2014/12/17 19:24:12 538990 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/17 19:24:12 54F1E0 c User1 (098C&000000/0C1F/0069/98:C3C846EFADECE0A904856D1CBB884746): rejected group (0 ms) (no matching reader)
was läuft da schief?
Zuletzt bearbeitet von einem Moderator: