Meine Quad - allgemeine Fragen und Erfahrungen

[Digitizer84]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ich teste es mit einer der kommenden Aufnahmen. Kann es aber auch evtl. daran liegen das er einfach nichts aufnimmt weil die Aufnahme startet bevor der Sender entschlüsselt wurde. Denn wie bereits geschrieben, muss nach dem Start aus dem Deep Standby erst gezapped werden damit die Pay Sender entschlüsselt werden.

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Es ist ein bisschen verworren. mal sollen die Treiber Schuld sein, mal ein Plugin wie das Seriestimer.

Jetzt teste mal die alten Treiber. Wenn es läuft, gut. Wenn nicht, kannst Du wieder auf die aktuellen gehen und testest mal Aufnahmen aus dem Standby. Bei mir klappt das einwandfrei, allerdings versetzte ich meine Box auch nie in den DeepStandby.

 

[Digitizer84]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ich auch nicht. Das macht die Box selber! Ich hatte das vor dem Neuflash mal über die Power Timer eingestellt. Da ging die Box nach 30 min im Standby in den Deep Standby.
Aber nun macht sie das von alleine. Wenn ich die Kiste morgends anwerfe dann fährt sie aus dem Deep hoch. Unter Power Timer ist nichts eingestellt aber evtl. hat er die Einstellung iwo noch gespeichert und führt es deswegen immer wieder aus.

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ja, das ist bestimmt noch irgendwo eine Option. Da gibts ja mehrere: "kurzer Druck auf Power Taste", was soll NACH einer Aufnahme passieren?, selbst bei EPGRefresh gibt es die Option "gehe in DeepStandby" nach einem Refresh.
Also da solltest Du in dem Fall mal die Optionen aufmerksam durchgehen, dazu die Plugins und schauen, was das Herunterfahren in den DeepStandby verursacht.

 

[cadking]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

kann man das eigentlich irgendwo fest einstellen was nach einer aufnahme passieren soll als es bei jeder immer von hand auf zb. "nichts" zu setzen? irgendwo ne versteckte einstell möglichkeit, beim standard omips2.1 ?
hab das schon immer vergeblich gesucht, weils nervt wenn man 10 aufnahmen gesondert ma kurz einspeichern will...

 

[Digitizer84]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Also unter epgrefresh ist die Option "in den standby gehen" verfügbar. Wenn ich die jetzt deaktviere dann bleibt de
Receiver doch nach der Aktualisierung nicht aus, sondern bleibt an. Oder irre ich mich da?

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ja. In den Standby gehen ist ja OK. Nur eben nicht DeepStandby. Dann ist es wohl ne andere Option

 

[Digitizer84]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Also eine deep standby Einstellung hab ich nicht im epgrefresh gefunden. Alle anderen Einstellungen hab ich durchsucht und nix gefunden.

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Irgendwas muss ja das ungewollte Herunterfahren in den Deepstandby verursachen. Ich kann Dir halt leider nicht sagen was, da ich nicht genau weiß was für Plugins Du hast und sicher nicht alle kenne.

Ich schau gerne mal in den allgemeinen Optionen nach. Hab halt openATV drauf.

 

[Batchman]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ich habe derzeit zwei "Unregelmäßigkeiten" mit der Box:
1. Wenn ich auf Ard-HD schalte (und nur dort), sehe ich neuerdings fast immer für rund 2-3s den OpenMIPS-Kreis oben links.
Bild&Ton läuft, aber für die Dauer des Kreises unbedienbar.
Stört eigentlich nicht, würde mich aber interessieren, ob das noch jemand hat
2.) Beim Klick auf "Software aktualisieren" bekomme ich immer einen GreenScreen. Falls jemand CrashLogs lesen kann, kann ichs hier ja mal posten. Mips ist Build von 30.11.13

...gesendet von meinem Taschenrechner mit Tapatalk....

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ja, hänge mal bitte den Crashlog an. Ich gebe den ggf. weiter wenn ich nicht schlau werde. Ist das noch OM 2.0 oder schon 2.1?

 

[Digitizer84]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

@mcmighty ich habe auch openatv drauf

Ich glaube ich habe es gefunden. Unter epgrefresh steht "nach epg Aktualisierung herunterfahren"
Wenn das an ist dann fährt erst danach in deep standby.

 

[Batchman]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ja, hänge mal bitte den Crashlog an. Ich gebe den ggf. weiter wenn ich nicht schlau werde. Ist das noch OM 2.0 oder schon 2.1?

Ist OE 2.1
Was heißt bei der Info "Hardware: Nicht verfügbar" ?

Du musst angemeldet sein, um Bilder zu sehen.

Wie hänge ich hier das Logfile an?

 

[McMighty]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Kannst einfach das txt File hier rein kopieren in Spoilern.
Oder als Anhang.

 

[Batchman]

AW: Meine Quad - allgemeine Fragen und Erfahrungen

Ja, hänge mal bitte den Crashlog an. Ich gebe den ggf. weiter wenn ich nicht schlau werde. Ist das noch OM 2.0 oder schon 2.1?

Gegen Schluß kommen ein paar Fehlermeldungen:
- ERROR reading section - Value too large for defined data type
- ERROR reading PES (fd=52) - Value too large for defined data type
- warning, skin is missing element hdfStatusPic in <class 'Plugins.SystemPlugins.SoftwareManager.plugin.UpdatePluginMenu'>
- ImportError: cannot import name CommitInfo
- getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !!

Spoiler

<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Di Dez 3 16:41:27 2013</crashdate>
<compiledate>Dec 1 2013</compiledate>
<contactemail>forum at www.openmips.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PLi-HD/skin.xml</skin>
<sourcedate>2013-11-30</sourcedate>
<branch>(no branch)</branch>
<rev>914d106</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>gigablue</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux gbquad 3.3.8-2.0 #1 SMP Mon Nov 4 05:22:15 CET 2013 mips GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline> ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=256M@512M console=ttyS0,115200n8</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<=!=[=C=D=A=T=A=[
Welcome to Openmips for %h
openmips 2.1 %h

]=]=>
</imageissue>
</image>
<software>
<enigma2software>
<=!=[=C=D=A=T=A=[
enigma2 - 2.8+git11724+914d106-r129
enigma2-fonts - 2010.11.14-r129
enigma2-meta - 2.8+git11724+914d106-r129
enigma2-plugin-drivers-network-usb-asix - 1.0-r1
enigma2-plugin-drivers-network-usb-ath9k-htc - 1.0-r1
enigma2-plugin-drivers-network-usb-ax88179-178a - 1.0-r1
enigma2-plugin-drivers-network-usb-carl9170 - 1.0-r1
enigma2-plugin-drivers-network-usb-r8712u - 1.0-r2
enigma2-plugin-drivers-network-usb-rt2500 - 1.0-r1
enigma2-plugin-drivers-network-usb-rt2800 - 1.0-r1
enigma2-plugin-drivers-network-usb-rt3573 - 1.0-r1
enigma2-plugin-drivers-network-usb-rt5572 - 1.0-r1
enigma2-plugin-drivers-network-usb-rt73 - 1.0-r2
enigma2-plugin-drivers-network-usb-rtl8187 - 1.0-r1
enigma2-plugin-drivers-network-usb-rtl8192cu - 1.0-r1
enigma2-plugin-drivers-network-usb-smsc75xx - 1.0-r2
enigma2-plugin-drivers-network-usb-zd1211rw - 1.0-r1
enigma2-plugin-drivers-usbserial - 1.0-r0
enigma2-plugin-extensions-audiosync - git5441+5c9edca-r38
enigma2-plugin-extensions-autotimer - git5441+5c9edca-r38
enigma2-plugin-extensions-bitrate - 2.0+git7+710f49f-r1
enigma2-plugin-extensions-cccaminfo - svn-2940-r0-OE2.0
enigma2-plugin-extensions-cutlisteditor - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-dvdplayer - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-epgsearch - git5441+5c9edca-r38
enigma2-plugin-extensions-gbaspectratioswitch - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-graphmultiepg - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-hbbtv - 2.0
enigma2-plugin-extensions-mediaplayer - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-mediaportal - 4.9.2+git2165+4fcf2d1-r0
enigma2-plugin-extensions-mediascanner - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-moviecut - git5441+5c9edca-r38
enigma2-plugin-extensions-openwebif - 0.1+git712+d0a5bad-r47.72
enigma2-plugin-extensions-pictureplayer - 2.8+git11724+914d106-r129
enigma2-plugin-extensions-ppanel - 2.0+git9+4ce6ca5-r0
enigma2-plugin-extensions-weatherplugin - git5441+5c9edca-r38
enigma2-plugin-extensions-zaphistorybrowser - git5441+5c9edca-r38
enigma2-plugin-pli-softcamsetup - 1.0+git120+3b24db7-r9
enigma2-plugin-skins-omblack - 1.0+git13+d64f942-r2
enigma2-plugin-skins-pli-hd - 0.1+git601+4b649d4-r0
enigma2-plugin-softcams-cccam - 2.3.0-r0
enigma2-plugin-softcams-cccam221 - 2.2.1-r0
enigma2-plugin-softcams-oscam-stable-cs - 1.10-r0
enigma2-plugin-softcams-scam - 3.60
enigma2-plugin-systemplugins-autobouquetsmaker - git577+b302583-r89
enigma2-plugin-systemplugins-autoresolution - git5441+5c9edca-r38
enigma2-plugin-systemplugins-blindscan - git577+b302583-r89
enigma2-plugin-systemplugins-commoninterfaceassignment - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-devicemanager - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-fastscan - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-hdmicec - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-hotplug - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-mphelp - git5441+5c9edca-r38
enigma2-plugin-systemplugins-networkbrowser - git5441+5c9edca-r38
enigma2-plugin-systemplugins-networkwizard - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-osd3dsetup - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-positionersetup - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-satfinder - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-skinselector - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-softwaremanager - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-swapmanager - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-toolkit - git5441+5c9edca-r38
enigma2-plugin-systemplugins-vfdcontrol - git577+b302583-r89
enigma2-plugin-systemplugins-videoenhancement - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-videomode - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-videotune - 2.8+git11724+914d106-r129
enigma2-plugin-systemplugins-wirelesslan - 2.8+git11724+914d106-r129
enigma2-plugins - git5441+5c9edca-r38
enigma2-plugins-meta - git5441+5c9edca-r38
enigma2-skins-meta - experimental-git394+472e9d9-r4
]=]=>
</enigma2software>
<xtrendsoftware>
<=!=[=C=D=A=T=A=[
]=]=>
</xtrendsoftware>
<gstreamersoftware>
<=!=[=C=D=A=T=A=[
gst-plugin-dvbmediasink - 0.10.0+git22+cf49bb0-r16
gst-plugin-libxt - 0.10.0+git4+568b515-r0
gst-plugin-subsink - 0.10.0+git5+0cb20d6-r1
gst-plugins-bad - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-cdxaparse - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-faad - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-fragmented - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-mms - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-mpegdemux - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-rtmp - 0.10.23.1+git12256+0518367-r9
gst-plugins-bad-vcdsrc - 0.10.23.1+git12256+0518367-r9
gst-plugins-base - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-alsa - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-app - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-audioconvert - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-audioresample - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-decodebin - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-decodebin2 - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-ogg - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-playbin - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-subparse - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-typefindfunctions - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-base-vorbis - 0.10.36.1+git10189+1e1e6ea-r13
gst-plugins-good - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-apetag - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-audioparsers - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-autodetect - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-avi - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-flac - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-flv - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-icydemux - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-id3demux - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-isomp4 - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-matroska - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-rtp - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-rtpmanager - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-rtsp - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-souphttpsrc - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-udp - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-good-wavparse - 0.10.31.1+git10791+5af6f5b-r14
gst-plugins-ugly - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-amrnb - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-amrwbdec - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-asf - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-cdio - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-dvdsub - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-mad - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git4640+5ddd97f-r9
gst-plugins-ugly-mpegstream - 0.10.19.1+git4640+5ddd97f-r9
gstreamer - 0.10.36.1+git12096+76fc67b-r8
]=]=>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
q 12669500, hor, pos 192, sr 22000000, fec 4
try to add 192 12669500 22000000 1 4 1
update
already in todo list
TSID: 0457 ONID: 0001
SAT DVB-S freq 12603750, vert, pos 192, sr 22000000, fec 4
try to add 192 12603750 22000000 0 4 0
update
already in todo list
TSID: 03f0 ONID: 0001
SAT DVB-S freq 11317500, hor, pos 192, sr 22000000, fec 4
try to add 192 11317500 22000000 1 4 1
update
already in todo list
TSID: 0402 ONID: 0001
SAT DVB-S freq 11597000, hor, pos 192, sr 22000000, fec 4
try to add 192 11597000 22000000 1 4 1
update
already in todo list
TSID: 040e ONID: 0001
SAT DVB-S freq 11038000, hor, pos 192, sr 22000000, fec 4
try to add 192 11038000 22000000 1 4 1
update
already in todo list
TSID: 0416 ONID: 0001
SAT DVB-S freq 11156000, hor, pos 192, sr 22000000, fec 4
try to add 192 11156000 22000000 1 4 1
update
already in todo list
TSID: 04ff ONID: 0001
SAT DVB-S freq 11992500, vert, pos 192, sr 27500000, fec 3
try to add 192 11992500 27500000 0 3 1
update
already in todo list
TSID: 045d ONID: 0001
SAT DVB-S freq 12692250, vert, pos 192, sr 22000000, fec 4
try to add 192 12692250 22000000 0 4 1
update
already in todo list
TSID: 045a ONID: 0001
SAT DVB-S freq 12640000, hor, pos 192, sr 22000000, fec 4
try to add 192 12640000 22000000 1 4 1
update
already in todo list
TSID: 0408 ONID: 0001
SAT DVB-S freq 11685500, hor, pos 192, sr 22000000, fec 4
try to add 192 11685500 22000000 1 4 1
update
already in todo list
TSID: 0456 ONID: 0001
SAT DVB-S freq 12580990, hor, pos 192, sr 22000000, fec 2
try to add 192 12580990 22000000 1 2 1
update
already in todo list
TSID: 040a ONID: 0001
SAT DVB-S freq 10979000, hor, pos 192, sr 22000000, fec 4
try to add 192 10979000 22000000 1 4 1
update
already in todo list
TSID: 0424 ONID: 0001
SAT DVB-S freq 10876500, hor, pos 192, sr 22000000, fec 4
try to add 192 10876500 22000000 1 4 1
update
already in todo list
TSID: 0430 ONID: 0001
SAT DVB-S freq 11856000, hor, pos 192, sr 27500000, fec 3
try to add 192 11856000 27500000 1 3 1
update
already in todo list
TSID: 0412 ONID: 0001
SAT DVB-S freq 11097000, hor, pos 192, sr 22000000, fec 4
try to add 192 11097000 22000000 1 4 1
update
already in todo list
TSID: 041e ONID: 0001
SAT DVB-S freq 10788000, hor, pos 192, sr 22000000, fec 4
try to add 192 10788000 22000000 1 4 1
successfully scanned
TSID: 03fc ONID: 0001
SAT DVB-S freq 11508500, hor, pos 192, sr 22000000, fec 4
try to add 192 11508500 22000000 1 4 1
update
already in todo list
TSID: 0422 ONID: 0001
SAT DVB-S freq 10847000, hor, pos 192, sr 22000000, fec 4
try to add 192 10847000 22000000 1 4 1
successfully scanned
TSID: 0420 ONID: 0001
SAT DVB-S freq 10817500, hor, pos 192, sr 22000000, fec 4
try to add 192 10817500 22000000 1 4 1
successfully scanned
TSID: 045b ONID: 0001
SAT DVB-S freq 12662750, vert, pos 192, sr 22000000, fec 4
try to add 192 12662750 22000000 0 4 1
update
already in todo list
TSID: 0427 ONID: 0001
SAT DVB-S freq 10920750, vert, pos 192, sr 22000000, fec 4
try to add 192 10920750 22000000 0 4 1
update
already in todo list
TSID: 03fa ONID: 0001
SAT DVB-S freq 11479000, hor, pos 192, sr 22000000, fec 4
try to add 192 11479000 22000000 1 4 1
update
already in todo list
TSID: 0445 ONID: 0001
SAT DVB-S freq 12265500, vert, pos 192, sr 27500000, fec 3
try to add 192 12265500 27500000 0 3 1
update
already in todo list
TSID: 0407 ONID: 0001
SAT DVB-S freq 11670750, vert, pos 192, sr 22000000, fec 4
try to add 192 11670750 22000000 0 4 1
update
already in todo list
TSID: 0452 ONID: 0001
SAT DVB-S freq 12522000, hor, pos 192, sr 22000000, fec 2
try to add 192 12522000 22000000 1 2 0
update
already in todo list
TSID: 03fe ONID: 0001
SAT DVB-S freq 11538000, hor, pos 192, sr 22000000, fec 4
try to add 192 11538000 22000000 1 4 1
update
already in todo list
TSID: 044e ONID: 0001
SAT DVB-S freq 12441000, hor, pos 192, sr 27500000, fec 3
try to add 192 12441000 27500000 1 3 1
really add
TSID: 043c ONID: 0001
SAT DVB-S freq 12090000, hor, pos 192, sr 27500000, fec 3
try to add 192 12090000 27500000 1 3 1
really add
TSID: 0440 ONID: 0001
SAT DVB-S freq 12168000, hor, pos 192, sr 27500000, fec 3
try to add 192 12168000 27500000 1 3 1
really add
TSID: 0431 ONID: 0001
SAT DVB-S freq 12109500, vert, pos 192, sr 27500000, fec 3
try to add 192 12109500 27500000 0 3 1
update
already in todo list
TSID: 0458 ONID: 0001
SAT DVB-S freq 12610500, hor, pos 192, sr 22000000, fec 4
try to add 192 12610500 22000000 1 4 1
update
already in todo list
TSID: 045e ONID: 0001
SAT DVB-S freq 12699000, hor, pos 192, sr 22000000, fec 4
try to add 192 12699000 22000000 1 4 1
update
already in todo list
TSID: 0460 ONID: 0001
SAT DVB-S freq 12728500, hor, pos 192, sr 22000000, fec 4
try to add 192 12728500 22000000 1 4 1
update
already in todo list
channel done!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12168000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1568 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
[SEC] set dynamic current limiting
eHdmiCEC: received message
eHdmiCEC: received message 83
eHdmiCEC: send message 84 10 00 03
eHdmiCEC: received message 84 40 00 04
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
eHdmiCEC: received message 8C
eHdmiCEC: send message 87 00 00 00
(0)fe event: status 0, inversion off, m_tuning 5
(0)fe event: status 1, inversion off, m_tuning 6
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12090000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1490 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
eHdmiCEC: received message 8C
eHdmiCEC: send message 87 00 00 00
[SEC] set dynamic current limiting
(0)fe event: status 0, inversion off, m_tuning 5
(0)fe event: status 1, inversion off, m_tuning 6
eHdmiCEC: received message A0 00 00 39 02
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12441000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1841 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
[SEC] set dynamic current limiting
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
eHdmiCEC: received message A0
eHdmiCEC: received message 9F
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12343500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1743 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
[SEC] set dynamic current limiting
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
eHdmiCEC: received message 9F
(0)fe event: status 0, inversion off, m_tuning 5
(0)fe event: status 1, inversion off, m_tuning 6
(0)fe event: status 0, inversion off, m_tuning 7
(0)fe event: status 1, inversion off, m_tuning 8
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12207000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1607 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
[SEC] set dynamic current limiting
eHdmiCEC: received message 46
eHdmiCEC: send message 47 67 62 71 75 61 64
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12129000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1529 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
[SEC] set dynamic current limiting
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
(0)fe event: status 0, inversion off, m_tuning 5
(0)fe event: status 1, inversion off, m_tuning 6
OURSTATE: failed, fatal
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12012000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1412 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1, inversion off, m_tuning 4
[SEC] set dynamic current limiting
(0)fe event: status 0, inversion off, m_tuning 5
(0)fe event: status 1, inversion off, m_tuning 6
(0)fe event: status 0, inversion off, m_tuning 7
(0)fe event: status 1, inversion off, m_tuning 8
action -> SetupActions cancel
*** warning *** scan was not finished!
(0)fe event: status 0, inversion off, m_tuning 9
(0)fe event: status 1, inversion off, m_tuning 10
action -> SetupActions cancel
playing 1:0:19:283D:3FB:1:C00000:0:0:0:
not pauseable.
not pauseable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
allocate channel.. 03fb:0001
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1743 mhz
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 0
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x71f3b160 running
[eEPGCache] channel 0x71f3b160 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0
allocate demux
decoder state: play, vpid=5101, apid=5102
DMX_SET_PES_FILTER(0x13ed) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x13ee) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x13ed) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x13f0) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
Send OK!! : OP_HBBTV_UNLOAD_AIT
[AutoRes] service changed
[eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
PATready
use pmtpid 13ec for service_id 283d
action -> OkCancelActions cancel
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
Rds PID 13f4 detected ? ! ?
have 1 video stream(s) (13ed), and 3 audio stream(s) (13ee, 13ef, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
decoder state: play, vpid=5101, apid=5102
Rds PID 13f4 detected ? ! ?
Send OK!! : OP_HBBTV_UNLOAD_AIT
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
Send OK!! : OP_HBBTV_UNLOAD_AIT
[AutoRes] determineContent
sdt update done!
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 16:41:12
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
Send OK!! : OP_HBBTV_UNLOAD_AIT
[EPGC] start caching events(1386085273)
AITready
Set Channel Info >> sid : 0, onid : 0, tsid : 0, name : , orgid : 0
main thread is non-idle! display spinner!
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
Name : HBBTV Das Erste Heiter bis Toedlich
URL :

Sie müssen registriert sein, um Links zu sehen.

OrgID : 19
AppID : 51
Control Code : 2
Profile Code : 0

Set Channel Info >> sid : 283D, onid : 1, tsid : 3FB, name : Das Erste HD, orgid : 19
ERROR reading section - Value too large for defined data type

poll: unhandled POLLERR/HUP/NVAL for fd 32(8)
ERROR reading PES (fd=52) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 52(8)
[EPGC] nownext finished(1386085281)
OCready
action -> OkCancelActions ok
okbuttonClick
building menu entries
warning, skin is missing element hdfStatusPic in <class 'Plugins.SystemPlugins.SoftwareManager.plugin.UpdatePluginMenu'>
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "/usr/lib/enigma2/python/Screens/Menu.py", line 50, in okbuttonClick
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Screens/Menu.py", line 63, in runScreen
File "<string>", line 1, in <module>
File "/usr/lib/enigma2/python/Screens/SoftwareUpdate.py", line 5, in <module>
ImportError: cannot import name CommitInfo
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x73a7d350>>,('OkCancelActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
</enigma2crashlog>
</crashlogs>
</openpli>