Laber Thema zu: (Erst) Freischaltung der "neuen" V14 mit OScam MIT sky Hardware

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

ist doch schonmal ein kleiner Erfolg:emoticon-0142-happy

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

chinook66 - Wir wissen nicht in welchem SCI Du welche Karte eingeschoben hast, dass musst Du entsprechend dann auch konfigurieren: dev/sci0 oder dev/sci1 aber für jeden Schacht/Karte anders!

 

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

ich gehe mal davon aus sci0 ist der obere Schacht?!?

 

[Dre@mON]

AW: Freischaltung der "neuen" V14 mit OScam

Bei meiner Dreambox ist unten sci0 und oben sci1.

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

Rate mal mit Rosenthal ...

 

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

ich denke so siehts besser aus......und jetzt heißt es warten?
oder muß ich noch was anderes machen?

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri May 15 17:40:07 2015
-------------------------------------------------------------------------------
2015/05/15 17:40:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10604 (mipsel-unknown-linux-gnu-libusb)
2015/05/15 17:40:07 0 s (main) System name = Linux
2015/05/15 17:40:07 0 s (main) Host name = dm800se
2015/05/15 17:40:07 0 s (main) Release = 3.2-dm800se
2015/05/15 17:40:07 0 s (main) Version = #1 SMP Fri Jun 6 18:01:34 CEST 2014
2015/05/15 17:40:07 0 s (main) Machine = mips
2015/05/15 17:40:07 0 s (main) Stb model = dm800se
2015/05/15 17:40:07 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 739
2015/05/15 17:40:07 0 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/05/15 17:40:07 0 s [Emu] oscam-emu version 713
2015/05/15 17:40:07 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/05/15 17:40:07 0 s (main) signal handling initialized
2015/05/15 17:40:07 0 s (config) 775 service-id's loaded in 23 ms
2015/05/15 17:40:07 0 s (config) 4 provid's loaded
2015/05/15 17:40:07 0 s (net) monitor: initialized (fd=6, port=988)
2015/05/15 17:40:07 0 s (net) cccam: initialized (fd=7, port=14141)
2015/05/15 17:40:07 0 s (reader) hd01 [internal] creating thread for device /dev/sci1
2015/05/15 17:40:07 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/15 17:40:07 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/15 17:40:07 0 s (main) waiting for local card init
2015/05/15 17:40:07 77300ED0 r key file not found in: /var/tuxbox/config
2015/05/15 17:40:07 77300ED0 r reading key file: /var/keys/SoftCam.Key
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] Reader sci internal, detected box type: dm800se
2015/05/15 17:40:07 6E4048 h (webif) webif: decompressed 159358 bytes back into 381788 bytes
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] card detected
2015/05/15 17:40:07 6E4048 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2015/05/15 17:40:08 77300ED0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/15 17:40:08 77300ED0 r (reader) emulator [emu] card detected
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Calculated work ETU is 3200.00 us reader mhz = 1
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75269
2015/05/15 17:40:09 77300ED0 r (reader) emulator [emu] found card system emu
2015/05/15 17:40:09 77300ED0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/15 17:40:09 77300ED0 r key file not found in: /var/tuxbox/config
2015/05/15 17:40:09 77300ED0 r reading key file: /var/keys/SoftCam.Key
2015/05/15 17:40:10 77300A00 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->mhz)

[/QUOTE]

- - - - - - - - - -

ich denke so siehts besser aus......und jetzt heißt es warten?
oder muß ich noch was anderes machen?

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri May 15 17:40:07 2015
-------------------------------------------------------------------------------
2015/05/15 17:40:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10604 (mipsel-unknown-linux-gnu-libusb)
2015/05/15 17:40:07 0 s (main) System name = Linux
2015/05/15 17:40:07 0 s (main) Host name = dm800se
2015/05/15 17:40:07 0 s (main) Release = 3.2-dm800se
2015/05/15 17:40:07 0 s (main) Version = #1 SMP Fri Jun 6 18:01:34 CEST 2014
2015/05/15 17:40:07 0 s (main) Machine = mips
2015/05/15 17:40:07 0 s (main) Stb model = dm800se
2015/05/15 17:40:07 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 739
2015/05/15 17:40:07 0 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/05/15 17:40:07 0 s [Emu] oscam-emu version 713
2015/05/15 17:40:07 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/05/15 17:40:07 0 s (main) signal handling initialized
2015/05/15 17:40:07 0 s (config) 775 service-id's loaded in 23 ms
2015/05/15 17:40:07 0 s (config) 4 provid's loaded
2015/05/15 17:40:07 0 s (net) monitor: initialized (fd=6, port=988)
2015/05/15 17:40:07 0 s (net) cccam: initialized (fd=7, port=14141)
2015/05/15 17:40:07 0 s (reader) hd01 [internal] creating thread for device /dev/sci1
2015/05/15 17:40:07 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/15 17:40:07 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/15 17:40:07 0 s (main) waiting for local card init
2015/05/15 17:40:07 77300ED0 r key file not found in: /var/tuxbox/config
2015/05/15 17:40:07 77300ED0 r reading key file: /var/keys/SoftCam.Key
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] Reader sci internal, detected box type: dm800se
2015/05/15 17:40:07 6E4048 h (webif) webif: decompressed 159358 bytes back into 381788 bytes
2015/05/15 17:40:07 77300A00 r (reader) hd01 [internal] card detected
2015/05/15 17:40:07 6E4048 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2015/05/15 17:40:08 77300ED0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/15 17:40:08 77300ED0 r (reader) emulator [emu] card detected
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Calculated work ETU is 3200.00 us reader mhz = 1
2015/05/15 17:40:09 77300A00 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75269
2015/05/15 17:40:09 77300ED0 r (reader) emulator [emu] found card system emu
2015/05/15 17:40:09 77300ED0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/15 17:40:09 77300ED0 r key file not found in: /var/tuxbox/config
2015/05/15 17:40:09 77300ED0 r reading key file: /var/keys/SoftCam.Key
2015/05/15 17:40:10 77300A00 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->mhz)

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

Leider sieht man im log nicht, ob die V14 eingelesen wurde.

 

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

wie kriege ich das noch raus?

 

[salidos]

AW: Freischaltung der "neuen" V14 mit OScam

Webif Status rechts CARDOK?

 

[neogeo21]

AW: Freischaltung der "neuen" V14 mit OScam

Hallo,

sorry dass ich so reinplatze, nur eine kleine Frage:

Wenn die V14 drin ist, sollte doch Card OK No entitlements im Status stehen? oder

mfg

Neogeo21

 

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

ist hier noch ein Fehler drin?

2015/05/15 17:53:34 CC0A40 r key file not found in: /var/tuxbox/config
2015/05/15 17:53:34 CC0A40 r reading key file: /var/keys/SoftCam.Key

 

[webman2]

AW: Freischaltung der &quot;neuen&quot; V14 mit OScam

ja - solllte

- - - - - - - - - -

Poste Deine oscam-dateien noch mal, bitte. Hast Du enable = 0 im reader für die v14 gelöscht (oscam.server) ?

 

[chinook66]

AW: Freischaltung der &quot;neuen&quot; V14 mit OScam

hier nochmal die server

Spoiler

v14
enable = 1
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-unknown = 1
ndsversion = 2

label = hd01
description = HD+weiss
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

- - - - - - - - - -

user

Spoiler

[account]
user = local
au = v14,HDplus
group = 1,2

und die dviapi

Spoiler

P:1830
P:098C
I:0

 

[dia]

AW: Freischaltung der "neuen" V14 mit OScam

past alles bis auf dies bei hd karte
mhz = 1
mhz = 450

 

[chinook66]

AW: Freischaltung der "neuen" V14 mit OScam

so könnte man es sagen