Laber Thema zu: (Erst) Freischaltung der "neuen" V14 mit OScam MIT sky Hardware

[MOSCH69]

AW: Freischaltung der "neuen" V14 mit OScam

Da schätz du richtig. Die kack....auf langj. Kundschaft.
Nur ein advokat und die verbraucherzentrale holt dich mit an sicherheit grenzender wahrscheinlichkeit aus den vertrag

Gesendet von meinem HTC One max mit Tapatalk

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

Hallo allerseits,

ich habe auch eine neue v14 inkl. Receiver bekommen.
Bisher hatte ich meine S02 in meiner altem DM7020 mit Cccam als Server verwendet.
Aufgrund der vielen klaren Aussagen hier im Formu habe ich jetzt aus OSCam gewechselt.
Ich habe fuer die alte 7020 (ppc) keine neuere Version als 1.0 gefunden.
Die Configs habe ich erstmal aus der Anleitung genommen und nur minimal angepasst (nachdem die Originale auch nicht funktioniert hatten).
Ich bekomme keine EMMs geloggt.
Die Karte habe ich sowohl per Telefon als auch (nochmal) ueber das KC aktiviert.

Koennt Ihr mir sagen, was ich falsch mache?

Hier mal meine Konfigs:

CONF

Spoiler

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 512
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 10
emmlogdir = /var/etc/tuxbox/log

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 0

[newcamd]
port = 10001@098C:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = serverbox
pmt_mode = 0
request_mode = 0

[webif]
httpport = 16003
httphelplang = de
httpuser = root
httppwd = ******
httprefresh = 10
httpallowed = 10.0.0.1-255.255.255.255,192.168.100.1-192.168.100.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

dvbapi

Spoiler

P: 098C
I: 0

server

Spoiler

[reader]
label = v14
enable = 1
protocol = internal
device = /dev/sci1
pincode = 1111
services = sky_v14
caid = 098C
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 100
ndsversion = 2
saveemm-unknown = 1
saveemm-g = 1
saveemm-u = 1

user

Spoiler

[account]
user = serverbox
pwd = *******
group = 1,2
au = v14
services = sky_v14

Im Log (mit etwas aufgebohrtem Loglevel) steht:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Apr 7 22:02:31 2015
-------------------------------------------------------------------------------
2015/04/07 22:02:31 3001E880 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4851 (powerpc-tuxbox-linux)
2015/04/07 22:02:31 3001E880 s version=1.00-unstable_svn, build #4851, system=powerpc-tuxbox-linux, nice=-1
2015/04/07 22:02:31 3001E880 s client max. idle=120 sec, debug level=0
2015/04/07 22:02:31 3001E880 s max. logsize=512 Kb
2015/04/07 22:02:31 3001E880 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2015/04/07 22:02:31 3001E880 s auth size=4976
2015/04/07 22:02:31 3001E880 s services reloaded: 0 services freed, 23 services loaded
2015/04/07 22:02:31 3001E880 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/07 22:02:31 3001E880 s signal handling initialized (type=sysv)
2015/04/07 22:02:31 3001E880 s 148 service-id's loaded
2015/04/07 22:02:31 3001E880 s 87 tier-id's loaded
2015/04/07 22:02:31 3001E880 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2015/04/07 22:02:31 3001E880 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2015/04/07 22:02:31 3001E880 s monitor: disabled
2015/04/07 22:02:31 3001E880 s camd33: disabled
2015/04/07 22:02:31 3001E880 s camd35: disabled
2015/04/07 22:02:31 3001E880 s cs378x: disabled
2015/04/07 22:02:31 3001E880 s newcamd: initialized (fd=8, port=10001, crypted)
2015/04/07 22:02:31 3001E880 s CAID: 098C
2015/04/07 22:02:31 3001E880 s provid #0: 000000
2015/04/07 22:02:31 3001E880 s cccam: disabled
2015/04/07 22:02:31 3001E880 s radegast: disabled
2015/04/07 22:02:31 3001E880 s http thread started
2015/04/07 22:02:31 3001E880 s creating thread for device /dev/sci1
2015/04/07 22:02:31 3001E880 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/07 22:02:31 3001E880 s waiting for local card init
2015/04/07 22:02:31 3102C4F0 h HTTP Server listening on port 16003
2015/04/07 22:02:31 3182C4F0 r reader thread started (thread=3182C4F0, label=v14, device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2015/04/07 22:02:31 3182C4F0 r v14 card detected
2015/04/07 22:02:31 3182C4F0 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
2015/04/07 22:02:32 3182C4F0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 22:02:33 3182C4F0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] parental lock setting: FF FF FF FF
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] type: VideoGuard Unknown Card, caid: 098C
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] serial: 005EE64B, BoxID: 12345678, baseyear: 1997
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] ready for requests
2015/04/07 22:02:35 3182C4F0 r found cardsystem videoguard2
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] v14 card detected
2015/04/07 22:02:35 3182C4F0 r [videoguard2-reader] type: VideoGuard Unknown Card
2015/04/07 22:02:37 3001E880 s init for all local cards done
2015/04/07 22:02:37 3001E880 s anti cascading disabled
2015/04/07 22:02:37 3202C4F0 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2015/04/07 22:02:37 3202C4F0 c dvbapi: 2 entries read from oscam.dvbapi
2015/04/07 22:02:37 3202C4F0 c dvbapi: found pmt file /tmp/pmt.tmp
2015/04/07 22:02:38 3202C4F0 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1723 PROVID: 000000
2015/04/07 22:02:38 3202C4F0 c dvbapi: [ADD PID 1] CAID: 1833 ECM_PID: 1823 PROVID: 000000
2015/04/07 22:02:38 3202C4F0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B23 PROVID: 000000
2015/04/07 22:02:38 3202C4F0 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A23 PROVID: 000000
2015/04/07 22:02:38 3202C4F0 c dvbapi: new program number: 0023 (TNT Film (TCM))
2015/04/07 22:02:38 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:02:38 3202C4F0 c dvbapi: try pids again #1
2015/04/07 22:02:38 3202C4F0 c serverbox (098C&000000/0023/98:A07A): not found (88 ms) by v14 (of 1 avail 1)
2015/04/07 22:02:38 3202C4F0 c dvbapi: try pids again #2
2015/04/07 22:02:38 3202C4F0 c serverbox (098C&000000/0023/98:A07A): not found (1 ms) by v14 (of 1 avail 1)
2015/04/07 22:02:38 3202C4F0 c dvbapi: try pids again #3
2015/04/07 22:02:38 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:02:38 3202C4F0 c serverbox (098C&000000/0023/98:A07A): not found (1 ms) by v14 (of 1 avail 1)
2015/04/07 22:02:39 3202C4F0 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1723 PROVID: 000000
2015/04/07 22:02:39 3202C4F0 c dvbapi: [ADD PID 1] CAID: 1833 ECM_PID: 1823 PROVID: 000000
2015/04/07 22:02:39 3202C4F0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B23 PROVID: 000000
2015/04/07 22:02:39 3202C4F0 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A23 PROVID: 000000
2015/04/07 22:02:39 3202C4F0 c dvbapi: new program number: 0023 (TNT Film (TCM))
2015/04/07 22:02:40 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:02:40 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:02:40 3202C4F0 c serverbox (098C&000000/0023/98:618D): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:02:46 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:02:46 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:02:46 3202C4F0 c serverbox (098C&000000/0023/98:F3BC): not found (76 ms) by v14 (of 1 avail 1)
2015/04/07 22:02:53 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:02:53 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:02:53 3202C4F0 c serverbox (098C&000000/0023/98:ADED): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:00 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:00 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:00 3202C4F0 c serverbox (098C&000000/0023/98:7C3B): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:07 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:07 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:07 3202C4F0 c serverbox (098C&000000/0023/98:3FB1): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:14 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:14 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:14 3202C4F0 c serverbox (098C&000000/0023/98:F6AA): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:21 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:21 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:21 3202C4F0 c serverbox (098C&000000/0023/98:0437): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:28 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:28 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:28 3202C4F0 c serverbox (098C&000000/0023/98:386C): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:35 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:35 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:35 3202C4F0 c serverbox (098C&000000/0023/98:81D7): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:42 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:42 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:42 3202C4F0 c serverbox (098C&000000/0023/98:A97F): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:49 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:49 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:49 3202C4F0 c serverbox (098C&000000/0023/98:1C2A): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:03:56 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:03:56 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:03:56 3202C4F0 c serverbox (098C&000000/0023/98:3871): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:04:03 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:04:03 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:04:03 3202C4F0 c serverbox (098C&000000/0023/98:79B4): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:04:10 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:04:10 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:04:10 3202C4F0 c serverbox (098C&000000/0023/98:CE3B): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:04:17 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:04:17 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:04:17 3202C4F0 c serverbox (098C&000000/0023/98:9D8B): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:04:24 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:04:24 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:04:24 3202C4F0 c serverbox (098C&000000/0023/98D0D): not found (77 ms) by v14 (of 1 avail 1)
2015/04/07 22:04:31 3182C4F0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/04/07 22:04:31 3202C4F0 c dvbapi: can't decode channel
2015/04/07 22:04:31 3202C4F0 c serverbox (098C&000000/0023/98:8F50): not found (77 ms) by v14 (of 1 avail 1)

Danke schonmal fuer jegliche Hilfe!

Gruss,
HF

 

[Enterprises]

AW: Freischaltung der "neuen" V14 mit OScam

Link Removed

edit by
Dodo83

 

[Rohrby]

AW: Freischaltung der "neuen" V14 mit OScam

Da kannst du nur hoffen das mit der Museums oscam nicht schon was schief gegangen ist!

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

Versuch mal folgendes ... und Oscam updaten.

oscam.dvbapi (ohne Leerzeichen und mit 1)
P:098C 1
I:0

 

[Rohrby]

AW: Freischaltung der "neuen" V14 mit OScam

Als allererstes Karte raus und oscam aktuallisieren!!!

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

DANKE erstmal!

Neue OSCam installiert, oscam.server nochmal angepasst ("ins7e11 = 15" eingefuegt)

server

Spoiler

[reader]
label = v14
enable = 1
protocol = internal
device = /dev/sci1
pincode = 1111
services = sky_v14
caid = 098C
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 100
ndsversion = 2
saveemm-unknown = 1
saveemm-g = 1
saveemm-u = 1

Jetzt schaut's etwas anders aus:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Apr 7 23:03:52 2015
-------------------------------------------------------------------------------
2015/04/07 23:03:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10648 (powerpc-linux)
2015/04/07 23:03:52 0 s (main) System name = Linux
2015/04/07 23:03:52 0 s (main) Host name = dm7020
2015/04/07 23:03:52 0 s (main) Release = 2.6.9
2015/04/07 23:03:52 0 s (main) Version = #1 Wed Dec 2 15:37:25 CET 2009
2015/04/07 23:03:52 0 s (main) Machine = ppc
2015/04/07 23:03:52 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1167
2015/04/07 23:03:52 0 s (config) services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/04/07 23:03:52 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/07 23:03:52 0 s (main) signal handling initialized
2015/04/07 23:03:52 0 s (config) 148 service-id's loaded in 9 ms
2015/04/07 23:03:52 0 s (config) 87 tier-id's loaded
2015/04/07 23:03:52 0 s (reader) v14 [internal] creating thread for device /dev/sci1
2015/04/07 23:03:52 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/07 23:03:52 0 s (main) waiting for local card init
2015/04/07 23:03:53 1013A2F8 h (webif) webif: decompressed 152833 bytes back into 367416 bytes
2015/04/07 23:03:53 1013A2F8 h (webif) HTTP Server running. ip=0.0.0.0 port=16003
2015/04/07 23:03:53 10139E50 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/04/07 23:03:53 10139E50 r (reader) v14 [internal] Reader sci internal, detected box type: generic
2015/04/07 23:03:54 10139E50 r (reader) v14 [internal] card detected
2015/04/07 23:03:54 10139E50 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:03:54 10139E50 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:03:54 10139E50 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/04/07 23:03:54 10139E50 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 76234
2015/04/07 23:03:55 10139E50 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] Card type: P1TV
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] Rom version: 20AA
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] Credit available on card: 0 euro
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] Extended 4C detected
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/04/07 23:03:56 10139E50 r (reader) v14 [internal] found card system videoguard2
2015/04/07 23:03:56 10139E50 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:03:56 10139E50 r (reader) v14 [videoguard2] card detected
2015/04/07 23:03:56 10139E50 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/07 23:03:57 0 s (main) init for all local cards done
2015/04/07 23:03:57 0 s (anticasc) anti cascading disabled
2015/04/07 23:03:57 10143338 c (client) plain dvbapi-client granted (serverbox, au=on (1 reader))
2015/04/07 23:03:57 10143338 c (dvbapi) Detected /dev/dvb/card0/demux0 Api: 1, userconfig boxtype: 1
2015/04/07 23:03:57 10139E50 r (reader) v14 [videoguard2] Deactivating card
2015/04/07 23:03:57 10139E50 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
2015/04/07 23:03:57 10145178 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/04/07 23:03:57 10145178 r (reader) v14 [videoguard2] Reader sci internal, detected box type: generic
2015/04/07 23:03:58 10145178 r (reader) v14 [videoguard2] card detected
2015/04/07 23:03:59 10145178 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:03:59 10145178 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/04/07 23:03:59 10145178 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/04/07 23:03:59 10145178 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 77165
2015/04/07 23:04:00 10145178 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:04:03 10145178 r (reader) v14 [internal] card system not supported
2015/04/07 23:04:03 10145178 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/04/07 23:04:05 10145178 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:04:05 10145178 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:04:05 10145178 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/04/07 23:04:05 10145178 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 76145
2015/04/07 23:04:06 10145178 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:04:09 10145178 r (reader) v14 [internal] card system not supported
2015/04/07 23:04:09 10145178 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:04:09 10145178 r (reader) v14 [internal] card initializing error

Komisch, dass die Karte erst erkannt wird aber dann deaktiviert. Oder lese ich das falsch?

Gruss,
HF

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

Hab die Box nochmal neu gestartet.
Jetzt sieht das Log ein klein wenig anders aus aber die Meldungen bzgl. der Karte scheinen mir gleich zu sein:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Apr 7 23:21:11 2015
-------------------------------------------------------------------------------
2015/04/07 23:21:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10648 (powerpc-linux)
2015/04/07 23:21:11 0 s (main) System name = Linux
2015/04/07 23:21:11 0 s (main) Host name = dm7020
2015/04/07 23:21:11 0 s (main) Release = 2.6.9
2015/04/07 23:21:11 0 s (main) Version = #1 Wed Dec 2 15:37:25 CET 2009
2015/04/07 23:21:11 0 s (main) Machine = ppc
2015/04/07 23:21:11 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 486
2015/04/07 23:21:11 0 s (config) services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/04/07 23:21:11 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/07 23:21:11 0 s (main) signal handling initialized
2015/04/07 23:21:11 0 s (config) 148 service-id's loaded in 13 ms
2015/04/07 23:21:11 0 s (config) 87 tier-id's loaded
2015/04/07 23:21:12 0 s (reader) v14 [internal] creating thread for device /dev/sci1
2015/04/07 23:21:12 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/07 23:21:12 0 s (main) waiting for local card init
2015/04/07 23:21:12 1013A2F8 h (webif) webif: decompressed 152833 bytes back into 367416 bytes
2015/04/07 23:21:12 1013A2F8 h (webif) HTTP Server running. ip=0.0.0.0 port=16003
2015/04/07 23:21:12 10139E50 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/04/07 23:21:12 10139E50 r (reader) v14 [internal] Reader sci internal, detected box type: generic
2015/04/07 23:21:13 10139E50 r (reader) v14 [internal] card detected
2015/04/07 23:21:13 10139E50 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:21:13 10139E50 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:21:13 10139E50 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/04/07 23:21:13 10139E50 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75482
2015/04/07 23:21:14 10139E50 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] Card type: P1TV
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] Rom version: 20AA
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] Credit available on card: 0 euro
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] Extended 4C detected
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/04/07 23:21:15 10139E50 r (reader) v14 [internal] found card system videoguard2
2015/04/07 23:21:15 10139E50 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:21:15 10139E50 r (reader) v14 [videoguard2] card detected
2015/04/07 23:21:15 10139E50 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/07 23:21:16 0 s (main) init for all local cards done
2015/04/07 23:21:16 0 s (anticasc) anti cascading disabled
2015/04/07 23:21:16 10142DB8 c (client) plain dvbapi-client granted (serverbox, au=on (1 reader))
2015/04/07 23:21:16 10142DB8 c (dvbapi) Detected /dev/dvb/card0/demux0 Api: 1, userconfig boxtype: 1
2015/04/07 23:21:16 10139E50 r (reader) v14 [videoguard2] Deactivating card
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1702 ECM_PID: 1723 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1833 ECM_PID: 1823 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09C4 ECM_PID: 1B23 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1A23 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in PMT
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0023 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 new program number: 0023 (TNT Film (TCM)) [pmt_list_management 3]
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 added new ecmpid 0 CAID: 1702 ECM_PID: 1723 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 added new ecmpid 1 CAID: 1833 ECM_PID: 1823 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 added new ecmpid 2 CAID: 09C4 ECM_PID: 1B23 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 added new ecmpid 3 CAID: 098C ECM_PID: 1A23 PROVID: 000000
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 found 4 ECMpids and 3 STREAMpids in PMT
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 receiver wants to demux srvid 0023 on adapter 0000 camask 0003 index 0001 pmtpid 0061
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 new program number: 0023 (TNT Film (TCM)) [pmt_list_management 3]
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/04/07 23:21:16 10142DB8 c (dvbapi) Demuxer 1 no suitable readers found that can be used for decoding!
2015/04/07 23:21:16 10139E50 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
2015/04/07 23:21:16 10143BD0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/04/07 23:21:16 10143BD0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: generic
2015/04/07 23:21:17 10143BD0 r (reader) v14 [videoguard2] card detected
2015/04/07 23:21:18 10143BD0 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:21:18 10143BD0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/04/07 23:21:18 10143BD0 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/04/07 23:21:19 10143BD0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 76035
2015/04/07 23:21:19 10142DB8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:19 10142DB8 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:19 10143BD0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:21:22 10142DB8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:22 10142DB8 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:23 10143BD0 r (reader) v14 [internal] card system not supported
2015/04/07 23:21:23 10143BD0 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/04/07 23:21:24 10143BD0 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:21:24 10143BD0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:21:24 10143BD0 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/04/07 23:21:24 10143BD0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75276
2015/04/07 23:21:25 10142DB8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:25 10142DB8 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:25 10143BD0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:21:28 10142DB8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:28 10142DB8 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:21:28 10143BD0 r (reader) v14 [internal] card system not supported
2015/04/07 23:21:28 10143BD0 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:21:28 10143BD0 r (reader) v14 [internal] card initializing error

 

[dia]

AW: Freischaltung der "neuen" V14 mit OScam

schau mal so sollte er ausssehen

Spoiler

[reader]
label = V14
description = V14-Sky
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

in der oscam.server:
pincode = 1111 raus damit (nur für Conax-, Cryptoworks und Viacess-Karten)
fix9993 = 1 raus damit, Fixed den error 9993 bei CAID 0919 SC's

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

Hallo dia,

danke fuer Deine Hilfe!
Ist das Absicht, dass da keine Services drin stehen?

Mit Deiner Config oben schaut's so aus:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Apr 7 23:38:34 2015
-------------------------------------------------------------------------------
2015/04/07 23:38:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10648 (powerpc-linux)
2015/04/07 23:38:34 0 s (main) System name = Linux
2015/04/07 23:38:34 0 s (main) Host name = dm7020
2015/04/07 23:38:34 0 s (main) Release = 2.6.9
2015/04/07 23:38:34 0 s (main) Version = #1 Wed Dec 2 15:37:25 CET 2009
2015/04/07 23:38:34 0 s (main) Machine = ppc
2015/04/07 23:38:34 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1618
2015/04/07 23:38:34 0 s (config) services reloaded: 0 services freed, 23 services loaded, rejected 0
2015/04/07 23:38:34 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/07 23:38:34 0 s (main) signal handling initialized
2015/04/07 23:38:34 0 s (config) 148 service-id's loaded in 9 ms
2015/04/07 23:38:34 0 s (config) 87 tier-id's loaded
2015/04/07 23:38:34 0 s (reader) v14 [internal] creating thread for device /dev/sci1
2015/04/07 23:38:34 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/07 23:38:34 0 s (main) waiting for local card init
2015/04/07 23:38:34 10139E50 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/04/07 23:38:34 10139E50 r (reader) v14 [internal] Reader sci internal, detected box type: generic
2015/04/07 23:38:34 1013A2F8 h (webif) webif: decompressed 152833 bytes back into 367416 bytes
2015/04/07 23:38:34 1013A2F8 h (webif) HTTP Server running. ip=0.0.0.0 port=16003
2015/04/07 23:38:35 10139E50 r (reader) v14 [internal] card detected
2015/04/07 23:38:35 10139E50 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:38:35 10139E50 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:38:35 10139E50 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/04/07 23:38:35 10139E50 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 76778
2015/04/07 23:38:36 10139E50 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] Card type: P1TV
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] Rom version: 20AA
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] Credit available on card: 0 euro
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] Extended 4C detected
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/04/07 23:38:37 10139E50 r (reader) v14 [internal] found card system videoguard2
2015/04/07 23:38:37 10139E50 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:38:37 10139E50 r (reader) v14 [videoguard2] card detected
2015/04/07 23:38:37 10139E50 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/07 23:38:38 0 s (main) init for all local cards done
2015/04/07 23:38:38 0 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam.emmcache in 0 ms
2015/04/07 23:38:38 0 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 1 ms
2015/04/07 23:38:38 0 s (anticasc) anti cascading disabled
2015/04/07 23:38:38 10143348 c (client) plain dvbapi-client granted (serverbox, au=on (1 reader))
2015/04/07 23:38:38 10143348 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2015/04/07 23:38:38 10143348 c (dvbapi) Detected /dev/dvb/card0/demux0 Api: 1, userconfig boxtype: 1
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1702 ECM_PID: 1723 PROVID: 000000
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1833 ECM_PID: 1823 PROVID: 000000
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09C4 ECM_PID: 1B23 PROVID: 000000
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1A23 PROVID: 000000
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in PMT
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0023 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 new program number: 0023 (TNT Film (TCM)) [pmt_list_management 3]
2015/04/07 23:38:38 10143348 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/04/07 23:38:38 10139E50 r (reader) v14 [videoguard2] Deactivating card
2015/04/07 23:38:38 10139E50 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
2015/04/07 23:38:38 30100590 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/04/07 23:38:38 30100590 r (reader) v14 [videoguard2] Reader sci internal, detected box type: generic
2015/04/07 23:38:39 30100590 r (reader) v14 [videoguard2] card detected
2015/04/07 23:38:41 30100590 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:38:41 30100590 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/04/07 23:38:41 30100590 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/04/07 23:38:41 30100590 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 76160
2015/04/07 23:38:41 10143348 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:38:41 30100590 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:38:44 10143348 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:38:45 30100590 r (reader) v14 [internal] card system not supported
2015/04/07 23:38:45 30100590 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/04/07 23:38:46 30100590 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/07 23:38:46 30100590 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/07 23:38:46 30100590 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/04/07 23:38:47 30100590 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 77007
2015/04/07 23:38:47 10143348 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:38:47 30100590 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/04/07 23:38:50 10143348 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/04/07 23:38:51 30100590 r (reader) v14 [internal] card system not supported
2015/04/07 23:38:51 30100590 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/07 23:38:51 30100590 r (reader) v14 [internal] card initializing error
2015/04/07 23:38:53 10143348 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Gruss,
HF

 

[dia]

AW: Freischaltung der "neuen" V14 mit OScam

bei der aktivierung ist es immer ratsammer die services rauszulassen

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

Hallo Webman,

hab ich probiert: Leerzeichen raus -> keine Aenderung.
Mit der 1 hinten dran kamen viele Fehlermeldungen wie:

2015/04/07 23:33:57 10142F90 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2015/04/07 23:33:57 10142F90 c (dvbapi) Demuxer 0 impossible to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1A23 PMTPID 0000 (NO MATCHING READER)
2015/04/07 23:33:57 10142F90 c (dvbapi) Demuxer 1 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2015/04/07 23:33:57 10142F90 c (dvbapi) Demuxer 1 impossible to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1A23 PMTPID 0061 (NO MATCHING READER)

Danke und Gruss,
HF

 

[webman2]

AW: Freischaltung der "neuen" V14 mit OScam

Ok - ändern musst Du label = V14 in label = v14.

 

[HansiFranzi]

AW: Freischaltung der "neuen" V14 mit OScam

Nur nochmal um sicher zu gehen: Aktuelle Konfig jetzt wie von dia empfohlen

Spoiler

[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Gruss,
HF