HIILFEEE: Bin total am Ende.

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hallo Jungs,

hab gerade ein anderes Problem, momentan funktioniert gar nichts mehr ... Receiver verbindet sich nicht mehr mit den Server und oscam.log kommt folgendes.

Spoiler

>> OSCam << cardserver started at Sat Feb 8 19:06:03 2014

-------------------------------------------------------------------------------

2014/02/08 19:06:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/08 19:06:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2738

2014/02/08 19:06:03 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0

2014/02/08 19:06:03 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/08 19:06:03 0 s signal handling initialized

2014/02/08 19:06:03 0 s 195 service-id's loaded in 4ms

2014/02/08 19:06:03 0 s monitor: initialized (fd=5, port=988)

2014/02/08 19:06:03 0 s newcamd: initialized (fd=6, port=123xx, ip=192.168.2.xxx)

2014/02/08 19:06:03 0 s -> CAID: 1702 PROVID: 000000

2014/02/08 19:06:03 0 s cccam: initialized (fd=7, port=xxx, ip=192.168.2.xxx)

2014/02/08 19:06:03 0 s v14 [smargo] creating thread for device /dev/ttyUSB0

2014/02/08 19:06:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/02/08 19:06:03 0 s waiting for local card init

2014/02/08 19:06:03 9B9E6E0 r v14 [smargo] smargo init type is smargo

2014/02/08 19:06:03 9BA07E0 h webif: decompressed 67795 bytes back into 191100 bytes

2014/02/08 19:06:03 9BA07E0 h HTTP Server running. ip=0.0.0.0 port=192

2014/02/08 19:06:03 9B9E6E0 r v14 [smargo] clocking for smartreader with smartreader protocol

2014/02/08 19:06:03 9B9E6E0 r v14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

2014/02/08 19:06:04 9B9E6E0 r v14 [smargo] card detected

2014/02/08 19:06:08 9B9E6E0 r v14 [smargo] ATR: 3F 03 40 57 5B

2014/02/08 19:06:08 9B9E6E0 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0

2014/02/08 19:06:08 9B9E6E0 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534

2014/02/08 19:06:08 9B9E6E0 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/08 19:06:09 9B9E6E0 r v14 [smargo] card system not supported

2014/02/08 19:06:09 9B9E6E0 r v14 [smargo] Normal mode failed, reverting to Deprecated Mode

2014/02/08 19:06:16 9B9E6E0 r v14 [smargo] ATR: 3F 03 40 57 5B

2014/02/08 19:06:16 9B9E6E0 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0

2014/02/08 19:06:16 9B9E6E0 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534

2014/02/08 19:06:16 9B9E6E0 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/08 19:06:17 9B9E6E0 r v14 [smargo] card system not supported

2014/02/08 19:06:17 9B9E6E0 r v14 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/02/08 19:06:17 9B9E6E0 r v14 [smargo] card initializing error


-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sat Feb 8 19:07:02 2014

-------------------------------------------------------------------------------

2014/02/08 19:07:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/08 19:07:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3018

2014/02/08 19:07:02 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0

2014/02/08 19:07:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/08 19:07:02 0 s signal handling initialized

2014/02/08 19:07:02 0 s 195 service-id's loaded in 1ms

2014/02/08 19:07:02 0 s monitor: initialized (fd=5, port=988)

2014/02/08 19:07:02 0 s newcamd: Bind request failed (Address already in use), waiting another 119 seconds

2014/02/08 19:07:03 0 s newcamd: Bind request failed (Address already in use), waiting another 118 seconds

2014/02/08 19:07:04 0 s newcamd: Bind request failed (Address already in use), waiting another 117 seconds

2014/02/08 19:07:05 0 s newcamd: Bind request failed (Address already in use), waiting another 116 seconds

2014/02/08 19:07:06 0 s newcamd: Bind request failed (Address already in use), waiting another 115 seconds

2014/02/08 19:07:07 0 s newcamd: Bind request failed (Address already in use), waiting another 114 seconds

2014/02/08 19:07:08 0 s newcamd: Bind request failed (Address already in use), waiting another 113 seconds

2014/02/08 19:07:09 0 s newcamd: Bind request failed (Address already in use), waiting another 112 seconds

2014/02/08 19:07:10 0 s newcamd: Bind request failed (Address already in use), waiting another 111 seconds

2014/02/08 19:07:11 0 s newcamd: Bind request failed (Address already in use), waiting another 110 seconds

2014/02/08 19:07:12 0 s newcamd: Bind request failed (Address already in use), waiting another 109 seconds

2014/02/08 19:07:13 0 s newcamd: Bind request failed (Address already in use), waiting another 108 seconds

2014/02/08 19:07:14 0 s newcamd: Bind request failed (Address already in use), waiting another 107 seconds

2014/02/08 19:07:15 0 s newcamd: Bind request failed (Address already in use), waiting another 106 seconds

Gruß
Werner

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Hi,

wie verbinden deine Clients? Newcamd oder CCcam?

Grüße
Bombadil

 

[mxer]

AW: HIILFEEE: Bin total am Ende.

Die / der ATR ist sehr kurz.
Nimm mal AutoMHz raus und stelle die Karte auf die 357, die für die V13 normal wären.
Oder habe ich was überlesen?

 

[4gx35]

AW: HIILFEEE: Bin total am Ende.

den abschnitt newcamd in oscam.conf entfernen, wird doch bestimmt nicht benötigt,

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Also ich denk mal CCcam ? So genau ich dir das jetzt auch nicht sagen, kläre mich mal auf , denn ich glaub ich glaub momentan sitz ich
total auf der Leitung.


Gruß
Werner

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Die / der ATR ist sehr kurz.
Nimm mal AutoMHz raus und stelle die Karte auf die 357, die für die V13 normal wären.
Oder habe ich was überlesen?

wo kann ich AutoMHz rausnehmen ? Karte hab ich auf 357 geändert , Karte ist´V14`

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

ok , Jungs , Sky ist wieder helle .

Hab ein paar fragen zu meinem oscam.log .

Spoiler

>> OSCam << cardserver started at Sun Feb 9 14:45:03 2014

-------------------------------------------------------------------------------

2014/02/09 14:45:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/09 14:45:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2737

2014/02/09 14:45:03 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0

2014/02/09 14:45:03 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/09 14:45:03 0 s signal handling initialized

2014/02/09 14:45:03 0 s 195 service-id's loaded in 2ms

2014/02/09 14:45:03 0 s monitor: initialized (fd=5, port=988)

2014/02/09 14:45:03 0 s cccam: initialized (fd=6, port=101, ip=192.168.2.1xx)

2014/02/09 14:45:03 0 s v14 [smargo] creating thread for device /dev/ttyUSB0

2014/02/09 14:45:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/02/09 14:45:03 0 s waiting for local card init

2014/02/09 14:45:03 82E1D48 r v14 [smargo] smargo init type is smargo

2014/02/09 14:45:03 82E3E48 h webif: decompressed 67795 bytes back into 191100 bytes

2014/02/09 14:45:03 82E3E48 h HTTP Server running. ip=0.0.0.0 port=192

2014/02/09 14:45:03 82E1D48 r v14 [smargo] clocking for smartreader with smartreader protocol

2014/02/09 14:45:03 82E1D48 r v14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

2014/02/09 14:45:04 82E1D48 r v14 [smargo] card detected

2014/02/09 14:45:08 82E1D48 r v14 [smargo] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/09 14:45:08 82E1D48 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/02/09 14:45:08 82E1D48 r v14 [smargo] Calculated work ETU is 17.42 us reader mhz = 534

2014/02/09 14:45:08 82E1D48 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/09 14:45:10 82E1D48 r v14 [smargo] Card type: P1TV

2014/02/09 14:45:10 82E1D48 r v14 [smargo] Rom version: 20AA

2014/02/09 14:45:11 82E1D48 r v14 [smargo] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15

2014/02/09 14:45:11 82E1D48 r v14 [smargo] found card system videoguard2

2014/02/09 14:45:11 82E1D48 r v14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1

2014/02/09 14:45:11 82E1D48 r v14 [videoguard2] card detected

2014/02/09 14:45:11 82E1D48 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)

2014/02/09 14:45:15 82E1D48 r v14 [smargo] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/09 14:45:15 82E1D48 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2

2014/02/09 14:45:15 82E1D48 r v14 [smargo] Calculated work ETU is 4.35 us reader mhz = 534 --------> WOHER KOMMEN DIE 534 WENN ICH 357 einstellte ?

2014/02/09 14:45:15 82E1D48 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/09 14:45:17 82E1D48 r v14 [smargo] Card type: P1TV

2014/02/09 14:45:17 82E1D48 r v14 [smargo] Rom version: 20AA

2014/02/09 14:45:18 82E1D48 r v14 [smargo] parental lock setting: FF FF FF FF

2014/02/09 14:45:18 82E1D48 r v14 [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C

2014/02/09 14:45:18 82E1D48 r v14 [smargo] serial: ###muss hier was rein ????#####, BoxID: ###und hier ????#####, baseyear: 2004

2014/02/09 14:45:18 82E1D48 r v14 [smargo] ready for requests

2014/02/09 14:45:18 82E1D48 r v14 [smargo] found card system videoguard2

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] card detected

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 2712, expiry date: 2014/02/03-00:01:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 2710, expiry date: 2013/11/28-00:01:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 0056, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 007b, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 008e, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00c0, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00c7, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00c8, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00c9, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00f3, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00fa, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:18 82E1D48 r v14 [videoguard2] tier: 00ff, expiry date: 2014/05/03-01:00:00

2014/02/09 14:45:32 0 s init for all local cards done

2014/02/09 14:45:32 0 s anti cascading disabled

2014/02/09 14:45:32 82F2F90 c anonymous disconnected from 192.168.2.1xx

2014/02/09 14:45:32 82F4C88 c encrypted cccam-client 192.168.2.1xx granted (werner, au=on (1 reader))


-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sun Feb 9 14:46:02 2014

-------------------------------------------------------------------------------

2014/02/09 14:46:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/09 14:46:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3017

2014/02/09 14:46:02 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0

2014/02/09 14:46:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/09 14:46:02 0 s signal handling initialized

2014/02/09 14:46:02 0 s 195 service-id's loaded in 1ms

2014/02/09 14:46:02 0 s monitor: initialized (fd=5, port=988)

2014/02/09 14:46:02 0 s cccam: Bind request failed (Address already in use), waiting another 119 seconds -----> was läuft hier falsch ???

2014/02/09 14:46:03 0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds

2014/02/09 14:46:04 0 s cccam: Bind request failed (Address already in use), waiting another 117 seconds

2014/02/09 14:46:05 0 s cccam: Bind request failed (Address already in use), waiting another 116 seconds

2014/02/09 14:46:06 0 s cccam: Bind request failed (Address already in use), waiting another 115 seconds

2014/02/09 14:46:07 0 s cccam: Bind request failed (Address already in use), waiting another 114 seconds

2014/02/09 14:46:08 0 s cccam: Bind request failed (Address already in use), waiting another 113 seconds

2014/02/09 14:46:09 0 s cccam: Bind request failed (Address already in use), waiting another 112 seconds

2014/02/09 14:46:10 0 s cccam: Bind request failed (Address already in use), waiting another 111 seconds

2014/02/09 14:46:11 0 s cccam: Bind request failed (Address already in use), waiting another 110 seconds

2014/02/09 14:46:12 0 s cccam: Bind request failed (Address already in use), waiting another 109 seconds

2014/02/09 14:46:13 0 s cccam: Bind request failed (Address already in use), waiting another 108 seconds

2014/02/09 14:46:14 0 s cccam: Bind request failed (Address already in use), waiting another 107 seconds

2014/02/09 14:46:15 0 s cccam: Bind request failed (Address already in use), waiting another 106 seconds

2014/02/09 14:46:16 0 s cccam: Bind request failed (Address already in use), waiting another 105 seconds

2014/02/09 14:46:17 0 s cccam: Bind request failed (Address already in use), waiting another 104 seconds

2014/02/09 14:46:18 0 s cccam: Bind request failed (Address already in use), waiting another 103 seconds

2014/02/09 14:46:19 0 s cccam: Bind request failed (Address already in use), waiting another 102 seconds

2014/02/09 14:46:20 0 s cccam: Bind request failed (Address already in use), waiting another 101 seconds

2014/02/09 14:46:21 82F4C88 c werner (098C&000000/0C25/007E/98:6B63C09341414B46B79B64E32061A857): found (268 ms) by v14 - Syfy HD ---->sehr lange Zeiten , oder ???
2014/02/09 14:46:21 0 s cccam: Bind request failed (Address already in use), waiting another 100 seconds

2014/02/09 14:46:22 0 s cccam: Bind request failed (Address already in use), waiting another 99 seconds

2014/02/09 14:46:23 0 s cccam: Bind request failed (Address already in use), waiting another 98 seconds

2014/02/09 14:46:24 0 s cccam: Bind request failed (Address already in use), waiting another 97 seconds

2014/02/09 14:46:25 82F4C88 c werner (098C&000000/0C25/007E/98:01901347B62A5F2A751AD2F02590D394): found (259 ms) by v14 - Syfy HD

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Zeig mal die Files, oscam.conf, oscam.user und oscam.server
Zugangsdaten usw. rausnehmen, kann ja nur noch Finetuning sein.

MfG

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Moin,

schau mal im WebIf nach. Dort gibt es eine auto Einstellung für den Smargo. Wenn das eingestellt ist, dann wählt Oscam den möglichst besten Wert, der zum ATR passt. Zum Zweiten Eintrag, da steht die Serial deiner Karte, auch im hex Format. Oscam überschreibt die (gute Funktion) mit den Rauten

Adress already in use, sagt mir, dass eventuell noch mit den gleichen Zugangsdaten verbunden werden will. Prüfe das bitte nach.

Grüße
Bombadil

 

[supertreki]

ok, kommt gleich.

Zeig mal die Files, oscam.conf, oscam.user und oscam.server
Zugangsdaten usw. rausnehmen, kann ja nur noch Finetuning sein.

MfG

oscam.conf

Spoiler

[global]

logfile = /var/log/oscam.log

nice = -1

maxlogsize = 200

preferlocalcards = 1


　

　

[cccam]

port = 101

serverip = 192.168.2.1xx

nodeid = 51A05A22103313E4

version = 2.3.0

reshare = 1

forward_origin_card = 1


[monitor]

port = 988

aulow = 120

monlevel = 4

hideclient_to = 15


[webif]

httpport = 192.168.2.1xx:101

httpuser = root

httppwd = 1supxxxxxxxx

httphelplang = de

httprefresh = 10

httpallowed = 127.0.0.1,192.168.2.1xx-192.168.255.255

aulow = 120

hideclient_to = 15

oscam.server

Spoiler

[Reader]


label = v14

description = SkyDE

protocol = smargo

device = /dev/ttyUSB0

caid = 098C

boxid = 12345678

ins7e11 = 15

ndsversion = 2

detect = cd

mhz = 357

cardmhz = 357

group = 1

emmcache = 1,1,2

oscam.user

Spoiler

[account]

user = werner

pwd = 1werxxxx

Caid = 098C

group = 1

au = v14

cccmaxhops = 2

cccreshare = 1

ok , das wars ...

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Hi,

Post #84 schon gelesen?

Grüße
Bombadil

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

zu Webif hab ich noch eine Frage: wen ich meine IPort eingebe, dann kommt die Meldung " Die Seite kann nicht angezeigt werden , wenn ich
mein nur meine IP eingebe komme ich auf , naja ich denke mal das das auch eine WebIf Oberfläche ist.
Die Oberfläche sieht folgendermaßen aus.

Ganz oben mittig steht .... Home .. System ... Cams ... Misc ...

IPC WebIf Access Manager ...

Gruß

Werner

- - - - - - - - - -

Hi,

Post #84 schon gelesen?

??? Post #84 ??? wo steht das ??


Gruß

Werner

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Das ist das webif von IPC.
Von daaus solltet Du auch ins oscamwebif kommen, unter cams.
OScamWI

MfG

Spoiler

[webif]

httpport = 192.168.2.1xx:101 # das rote raus

httpuser = root

httppwd = 1supxxxxxxxx

httphelplang = de

httprefresh = 10

httpallowed = 127.0.0.1,192.168.2.1xx-192.168.255.255

aulow = 120

hideclient_to = 15

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Hi,

httpport                      = 192.168.2.1xx:101

ist auch keine Portangabe. Mach das mal so

httpport                      = 101

dann IP:101. dann bist du auf dem Oscam WebIf.

Post #84

Grüße
Bombadil

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hi,

also, httpport auf = 101 geändert. Wenn ich meine IP:101 eingebe kommt wieder die Meldung " Die Seite kann nicht angezeigt werden" , komisch , vor ca 4 Tagen hat es genau einmal funktioniert .

Was kann ich sonst noch für die Konfigurationen verwenden ??