HDplus dunkel über TV Karte und Smargo mit Oscam

[Derek Buegel]

Und auch entsprechend im IPC-WI angepasst? OSCam neu starten und Log in Spoiler posten.

MfG

 

[jonnydoe]

Ja ist ne Prämium.
In meiner oscam.server ist ein Fehler drin. Ich hatte UDEV-Rules angelegt.
device = /dev/HD02
Das muss bei Dir natürlich auf den USB-Port verlinken
also device = /dev/USB01
Oder Du Gehst ins IPC-WI auf Manager und vergibst einen eindeutigen Namen für die Easymouse.
Dann muss die device wie folgt lauten:
device = /dev/eindeutiger Name

Das kommt davon, wenn man mit Copy & Paste arbeitet (Asche über mein Haupt!).

MfG

In der oscam.server hatte ich "jonnydoe" als Devicenamen eingegeben. Im Manger finde ich nichts, wo ich den Namen eingeben könnte.

 

[jonnydoe]

Oh, im IPC Manger steht unten, dass er keinen Reader gefunden hat.

IPC EMail Manager.
-> New Email User <-
IPC Backups.
Erstellt Backups von Konfigurationsdateien (Config) oder aller IPC-Ordner (Full) und bietet die Datei hier zum Downloaden an.
Achtung! Auf manche Files darf der Webserver nicht zugreifen. Für ein vollständiges Backup dann bitte den Konsolen Befehl i backup benutzen!
Full Config

IPC Recover.
IPC Backup Datei:

IPC UDEV.
No Readers found!



Und das wurde geloggt:

Spoiler: o log

2018/09/28 23:47:44 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11432 (arm-linux-gnueabihf)
2018/09/28 23:47:44 00000000 s (main) System name = Linux
2018/09/28 23:47:44 00000000 s (main) Host name = raspberrypi
2018/09/28 23:47:44 00000000 s (main) Release = 4.14.34-v7+
2018/09/28 23:47:44 00000000 s (main) Version = #1110 SMP Mon Apr 16 15:18:51 BST 2018
2018/09/28 23:47:44 00000000 s (main) Machine = armv7l
2018/09/28 23:47:44 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14283
2018/09/28 23:47:44 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/28 23:47:44 00000000 s (main) signal handling initialized
2018/09/28 23:47:44 00000000 s (net) monitor: initialized (fd=5, port=30000, prio=18 [ SO_PRIORITY IP_TOS ])
2018/09/28 23:47:44 00000000 s (reader) HD01 [mouse] creating thread for device /dev/jonnydoe
2018/09/28 23:47:44 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/28 23:47:44 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/09/28 23:47:44 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:44 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:44 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/09/28 23:47:44 00000000 s (anticasc) anti cascading disabled
2018/09/28 23:47:44 35ADA87E h (webif) webif: decompressed 176633 bytes back into 433584 bytes
2018/09/28 23:47:44 35ADA87E h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2018/09/28 23:47:46 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:46 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:48 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:48 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:50 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:50 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:52 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:52 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:54 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:54 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:56 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:56 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:47:58 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:47:58 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:48:00 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:48:00 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:48:02 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:48:02 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe
2018/09/28 23:48:04 2E5DE363 r (reader) HD01 [mouse] ERROR: Opening device /dev/jonnydoe (errno=2 No such file or directory)
2018/09/28 23:48:04 2E5DE363 r (reader) HD01 [mouse] Cannot open device: /dev/jonnydoe

 

[bl0w]

Mal den raspberry neu starten mit eingesteckter easymouse.

Das kannst du machen indem du „sudo reboot“ in putty eingibst.

 

[Derek Buegel]

Easymouse ist angeschlossen?

MfG

Machen wir morgen weiter. Rom wurde auch nicht an einem Tage gebaut.

 

[jonnydoe]

Morgen klingt gut, vielen Dank !

Sehe, dass da HD01 statt 02 steht.

Nur nochmal zu Sicherheit meine Anschlüsse:

Raspberry mit LAN an der Fritzbox und per USB an der Easymouse2. Und Stromkabel an kleinem USB vom Raspberry. Sonst nichts.

 

[jonnydoe]

Boh ist das spät. Danke euch für eure Zeit. Gute Nacht...

 

[bl0w]

Morgen klingt gut, vielen Dank !

Sehe, dass da HD01 statt 02 steht.

Nur nochmal zu Sicherheit meine Anschlüsse:

Raspberry mit LAN an der Fritzbox und per USB an der Easymouse2. Und Stromkabel an kleinem USB vom Raspberry. Sonst nichts.

Deine Verkabelung stimmt... nach dem reboot sollte die easymouse erkannt werden und dann musst du nur im webif den richtigen alias anlegen der in der oscam.server bei device auf /dev/ttyUSB0 umstellen.

Gute Nacht...

 

[jonnydoe]

Wieder aufgewacht. Hab jetzt den Namen vom Device im Manager eintragen können und das Log sieht gut aus oder ? Wenn ich das richtig deute, hat er meine Karte eingelesen. Jetzt fehlt nur noch die Auswahl und Konfiguration vom DVB-Viewer plugin oder ? Ich habe noch das Acamd plugin im DVB-Viewer.

Spoiler: oscam.log

2018/09/29 02:06:21 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11432 (arm-linux-gnueabihf)
2018/09/29 02:06:21 00000000 s (main) System name = Linux
2018/09/29 02:06:21 00000000 s (main) Host name = raspberrypi
2018/09/29 02:06:21 00000000 s (main) Release = 4.14.70-v7+
2018/09/29 02:06:21 00000000 s (main) Version = #1144 SMP Tue Sep 18 17:34:46 BST 2018
2018/09/29 02:06:21 00000000 s (main) Machine = armv7l
2018/09/29 02:06:21 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1500
2018/09/29 02:06:21 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/29 02:06:21 00000000 s (main) signal handling initialized
2018/09/29 02:06:21 00000000 s (net) monitor: initialized (fd=5, port=30000, prio=18 [ SO_PRIORITY IP_TOS ])
2018/09/29 02:06:21 00000000 s (reader) HD01 [mouse] creating thread for device /dev/jonnydoe
2018/09/29 02:06:21 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/29 02:06:21 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/09/29 02:06:21 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/09/29 02:06:21 00000000 s (anticasc) anti cascading disabled
2018/09/29 02:06:21 23270300 h (webif) webif: decompressed 176633 bytes back into 433584 bytes
2018/09/29 02:06:21 23270300 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2018/09/29 02:06:22 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75128
2018/09/29 02:06:22 64C11C57 r (reader) HD01 [mouse] Flush readed byte Nr 1 value 03 time_us 5810
2018/09/29 02:06:22 64C11C57 r (reader) HD01 [mouse] Buffers readed 1 bytes total time_us 80961
2018/09/29 02:06:22 64C11C57 r (reader) HD01 [mouse] Reader initialized (device=/dev/jonnydoe, detect=cd, mhz=358, cardmhz=358)
2018/09/29 02:06:22 64C11C57 r (reader) HD01 [mouse] card detected
2018/09/29 02:06:23 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120
2018/09/29 02:06:24 64C11C57 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2018/09/29 02:06:24 64C11C57 r (reader) HD01 [mouse] HD-Plus 02 recognized
2018/09/29 02:06:24 64C11C57 r (reader) HD01 [mouse] Setting baudrate to 111600 bps
2018/09/29 02:06:24 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118
2018/09/29 02:06:25 64C11C57 r (reader) HD01 [mouse] detect native nagra card
2018/09/29 02:06:26 64C11C57 r (reader) HD01 [mouse] ready for requests
2018/09/29 02:06:26 64C11C57 r (reader) HD01 [mouse] found card system nagra
2018/09/29 02:06:26 64C11C57 r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] ROM: D N A S P 1 8 0
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] REV: M e r 0 0 0
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] SER: ############
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] CAID: 1843
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] IRD ID: ############
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] active to: 2018/11/19 11:59
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] -----------------------------------------
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] |id |tier |valid from |valid to |
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] +----+--------+------------+------------+
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] |8011|0066 |2012/05/15 |2013/05/16 |
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] |8011|0BEA |2018/02/09 |2019/02/10 |
2018/09/29 02:06:27 64C11C57 r (reader) HD01 [nagra] -----------------------------------------

 

[axel]

Hi,

in der Ruhe liegt die Kraft.

Poste alle Konfigs von Oscam, dazu ein Log ab Neustart.

Die Easymouse ist WIE eingestellt?

Gruß aus dem HD+ Land.



Gesendet von meinem Xiaomi POCOPHONE F1 mit Tapatalk

 

[jonnydoe]

Oscam Konfiguration hatte mir Derek schon gemacht:

Spoiler: oscam.conf

[global]
loghistorylines = 64
logfile = /var/log/ipc/OScam.log
clienttimeout = 5150
fallbacktimeout = 3600
clientmaxidle = 240
bindwait = 40
netprio = 18
nice = -1
maxlogsize = 1024
waitforcards = 0
waitforcards_extra_delay = 550
preferlocalcards = 1
readerrestartseconds = 3720
dropdups = 1
failbantime = 1
failbancount = 5
emmlogdir =

[cache]
delay = 100
max_time = 110
cwcycle_check_enable = 1
cwcycle_maxlist = 4000
cwcycle_allowbadfromffb = 1
cwcycle_usecwcfromce = 1

[cs378x]
port = anpassen

[cccam]
port = anpassen
nodeid =
version = 2.3.0
reshare = 1

[monitor]
port = 30000
nocrypt = 255.255.255.255
aulow = 120
monlevel = 4
hideclient_to = 15

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpshowpicons = 1
httppiconsize = 59
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
aulow = 120
hideclient_to = 15
http_status_log = 1

Spoiler: oscam.user

[account]
user = jonnydoe
pwd = ............
uniq = 1
au = 1
group = 1

Spoiler: oscam.server

[reader]
label = HD01
protocol = mouse
device = /dev/jonnydoe
services = hdplus
autospeed = 0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 358
cardmhz = 358
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,1,2,0

 

[jonnydoe]

RESTART:

Spoiler: oscam.log

2018/09/29 03:10:41 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11432 (arm-linux-gnueabihf)
2018/09/29 03:10:41 00000000 s (main) System name = Linux
2018/09/29 03:10:41 00000000 s (main) Host name = raspberrypi
2018/09/29 03:10:41 00000000 s (main) Release = 4.14.70-v7+
2018/09/29 03:10:41 00000000 s (main) Version = #1144 SMP Tue Sep 18 17:34:46 BST 2018
2018/09/29 03:10:41 00000000 s (main) Machine = armv7l
2018/09/29 03:10:41 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9643
2018/09/29 03:10:41 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/09/29 03:10:41 00000000 s (main) signal handling initialized
2018/09/29 03:10:41 00000000 s (net) monitor: initialized (fd=5, port=30000, prio=18 [ SO_PRIORITY IP_TOS ])
2018/09/29 03:10:41 00000000 s (reader) HD01 [mouse] creating thread for device /dev/jonnydoe
2018/09/29 03:10:41 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/29 03:10:41 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/09/29 03:10:41 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/09/29 03:10:41 00000000 s (anticasc) anti cascading disabled
2018/09/29 03:10:41 23270300 h (webif) webif: decompressed 176633 bytes back into 433584 bytes
2018/09/29 03:10:41 23270300 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2018/09/29 03:10:41 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75127
2018/09/29 03:10:41 64C11C57 r (reader) HD01 [mouse] Flush readed byte Nr 1 value 03 time_us 5805
2018/09/29 03:10:41 64C11C57 r (reader) HD01 [mouse] Buffers readed 1 bytes total time_us 80983
2018/09/29 03:10:41 64C11C57 r (reader) HD01 [mouse] Reader initialized (device=/dev/jonnydoe, detect=cd, mhz=358, cardmhz=358)
2018/09/29 03:10:42 64C11C57 r (reader) HD01 [mouse] card detected
2018/09/29 03:10:42 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118
2018/09/29 03:10:43 64C11C57 r (reader) HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2018/09/29 03:10:43 64C11C57 r (reader) HD01 [mouse] HD-Plus 02 recognized
2018/09/29 03:10:43 64C11C57 r (reader) HD01 [mouse] Setting baudrate to 111600 bps
2018/09/29 03:10:43 64C11C57 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75116
2018/09/29 03:10:44 64C11C57 r (reader) HD01 [mouse] detect native nagra card
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [mouse] ready for requests
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [mouse] found card system nagra
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] ROM: D N A S P 1 8 0
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] REV: M e r 0 0 0
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] SER: ############
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] CAID: 1843
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] IRD ID: ############
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] active to: 2018/11/19 11:59
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] -----------------------------------------
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] |id |tier |valid from |valid to |
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] +----+--------+------------+------------+
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] |8011|0066 |2012/05/15 |2013/05/16 |
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] |8011|0BEA |2018/02/09 |2019/02/10 |
2018/09/29 03:10:46 64C11C57 r (reader) HD01 [nagra] -----------------------------------------

 

[jonnydoe]

Easymouse2:

5Volt, Phoenix, 3,579mHz, und rechts auf 6 mHz.

 

[jonnydoe]

[cs378x]
port = anpassen

[cccam]
port = anpassen

Das ist aus der oscam.conf. Was muss ich da reinschreiben ?

 

[filius00]

Was muss

Den Port den du für das jeweilige Protokoll nutzen willst.