HD+02 wird nicht richtig eingelesen

Mc.Klappstuhl · 2. November 2014

Schönen Guten Abend an alle,

Ich benutze schon seit längerem euer Image, für diese Arbeit erstmal vielen Dank!

Mein Problem ist allerdings das ich die HD+ Sender nicht mehr Hell bekomme, hatte es allerdings erst mal auf die lange Bank geschoben. Seit heute hab ich mich damit auseinander gesetzt und mehrere Stunden probiert. Ich hab mich durch diesen Thread geschlagen und bin scheitert, allerdings schon daran den Status im WI des Os-Cam auf "CARDOK" zubekommen.

Grundlagen:
Ich benutze die HD02, die Schwarze Karte, diese steckt im oberen Cardreader mit dem Chip nach Oben.
Die Karte funktioniert bei meinem Bruder am Fernseher, er betreibt diese mit einem Ci-Slot Adapter direkt an seinem Fernseher. Ich will damit sagen ich habe zweit schwarze HD+ Karten zur Verfügung und beide funktionieren beim ihm.

Habe den Receiver heute auf die V150 upgedatet, und das EMU "OScam os-cam svn 8395" aus dem Add-On Manager installiert sowie den Support für die HD02 Karte.

Das eigentliche Problem ist das ich die Karte nicht richtig ausgelesen bekomme, irgendwo steckt da noch der Wurm drin, der Status des WI des Oscam zeigt immer "NEEDINIT no entitlements"

[TABLE="class: status, width: 100%"]
[TR]
[TH="class: statuscol0"]hide
[/TH]
[TH="class: statuscol1"]Thread ID
[/TH]
[TH="class: statuscol2"]Type
[/TH]
[TH="class: statuscol3"]ID
[/TH]
[TH="class: statuscol4"]Label
[/TH]
[TH="class: statuscol5"]AU
[/TH]
[TH="class: statuscol6"]Crypted
[/TH]
[TH="class: statuscol7"]Address
[/TH]
[TH="class: statuscol8"]Port
[/TH]
[TH="class: statuscol9"]Protocol
[/TH]
[TH="class: statuscol10"]Login
[/TH]
[TH="class: statuscol11"]Online
[/TH]
[TH="class: statuscol12"]CAID:SRVID
[/TH]
[TH="class: statuscol13"]Current Channel
[/TH]
[TH="class: statuscol14"]LB Value/ Reader
[/TH]
[TH="class: statuscol15"]Idle
[/TH]
[TH="class: statuscol16"]Status
[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x521f20
[/TD]
[TD="class: statuscol2"]s
[/TD]
[TD="class: statuscol3"][/TD]
[TD="class: statuscol4"]root
[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]server
[/TD]
[TD="class: statuscol10"]02.11.14 19:46:28
[/TD]
[TD="class: statuscol11"]00:00:25
[/TD]
[TD="class: statuscol12"]0000:0000
[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:24
[/TD]
[TD="class: statuscol16"]OK
[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x526588
[/TD]
[TD="class: statuscol2"]h
[/TD]
[TD="class: statuscol3"]1
[/TD]
[TD="class: statuscol4"]root
[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]http
[/TD]
[TD="class: statuscol10"]02.11.14 19:46:29
[/TD]
[TD="class: statuscol11"]00:00:24
[/TD]
[TD="class: statuscol12"]0000:0000
[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:20
[/TD]
[TD="class: statuscol16"]OK
[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1
[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x535f08
[/TD]
[TD="class: statuscol2"]r
[/TD]
[TD="class: statuscol3"]1
[/TD]
[TD="class: statuscol4"]hdplus
[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF
[/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]internal
[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000
[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:00:24
[/TD]
[TD="class: statuscol16"]NEEDINIT

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[/TABLE]

Das Logfile von der Status-Seite des WI:

2014/11/02 19:46:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2295
2014/11/02 19:46:29 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/11/02 19:46:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/02 19:46:29 0 s signal handling initialized
2014/11/02 19:46:29 0 s 187 service-id's loaded in 11ms
2014/11/02 19:46:29 0 s 79 tier-id's loaded
2014/11/02 19:46:29 0 s 13 provid's loaded
2014/11/02 19:46:29 0 s ERROR: Cannot open file "/var/keys/oscam.guess" (errno=2 No such file or directory)
2014/11/02 19:46:29 0 s monitor: disabled
2014/11/02 19:46:29 0 s camd33: disabled
2014/11/02 19:46:29 0 s camd35: disabled
2014/11/02 19:46:29 0 s cs378x: disabled
2014/11/02 19:46:29 0 s newcamd: disabled
2014/11/02 19:46:29 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/11/02 19:46:29 526588 h dvbapi: HTTP Server listening on port 8888
2014/11/02 19:46:29 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/11/02 19:46:29 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/11/02 19:46:29 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/11/02 19:46:29 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/11/02 19:46:29 0 s hdplus [internal] creating thread for device /dev/sci0
2014/11/02 19:46:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/02 19:46:29 0 s waiting for local card init
2014/11/02 19:46:29 535F08 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2014/11/02 19:46:30 535F08 r hdplus [internal] card detected
2014/11/02 19:46:31 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:46:31 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:46:31 535F08 r hdplus [internal] Calculated work ETU is 8.70 us
2014/11/02 19:46:32 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:46:34 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:46:35 535F08 r hdplus [internal] detect native nagra card
2014/11/02 19:46:37 535F08 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 19:46:39 535F08 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/02 19:46:39 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:46:39 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:46:39 535F08 r hdplus [internal] Calculated work ETU is 8.70 us
2014/11/02 19:46:40 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:46:42 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:46:44 535F08 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 19:46:46 535F08 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/02 19:46:46 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:46:46 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:46:46 535F08 r hdplus [internal] Calculated work ETU is 8.70 us
2014/11/02 19:46:47 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:46:49 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:46:49 535F08 r hdplus [internal] card system not supported
2014/11/02 19:46:49 535F08 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/02 19:46:49 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:46:49 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:46:49 535F08 r hdplus [internal] Calculated work ETU is 101.09 us
2014/11/02 19:46:50 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:46:52 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:46:53 535F08 r hdplus [internal] detect native nagra card
2014/11/02 19:46:55 535F08 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 19:46:57 535F08 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/02 19:46:57 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:46:57 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:46:57 535F08 r hdplus [internal] Calculated work ETU is 8.70 us
2014/11/02 19:46:58 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:47:00 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:47:02 535F08 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 19:47:04 535F08 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/02 19:47:04 535F08 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/02 19:47:04 535F08 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/02 19:47:04 535F08 r hdplus [internal] Calculated work ETU is 8.70 us
2014/11/02 19:47:05 535F08 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/11/02 19:47:07 535F08 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/02 19:47:07 535F08 r hdplus [internal] card system not supported
2014/11/02 19:47:07 535F08 r hdplus [internal] card initializing error
2014/11/02 19:47:07 0 s init for all local cards done
2014/11/02 19:47:07 0 s anti cascading disabled
2014/11/02 19:47:07 538250 c plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
2014/11/02 19:47:07 538250 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2014/11/02 19:47:10 538250 c dvbapi: [ADD PID 0] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2014/11/02 19:47:10 538250 c dvbapi: [ADD PID 1] CAID: 098C ECM_PID: 1AAA PROVID: 000000
2014/11/02 19:47:10 538250 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2014/11/02 19:47:10 538250 c dvbapi: [ADD PID 3] CAID: 1830 ECM_PID: 1CAA PROVID: 000000
2014/11/02 19:47:10 538250 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1EAA PROVID: 000000
2014/11/02 19:47:10 538250 c dvbapi: Found 5 ECMpids and 5 STREAMpids in PMT
2014/11/02 19:47:10 538250 c dvbapi: New program number: EF15 (RTL2 HD) [pmt_list_management 3]
2014/11/02 19:47:10 538250 c dvbapi: ERROR: Can't decode channel

Und hier die Einstellungen in der Unterkategorie files:

Oscam Version:

Unix starttime: 1414953989
Starttime: 02.11.2014 19:46:29
Version: oscam-1.20-unstable_svn-r8395
Web interface support: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: no
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: no
camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: no
ghttp: no
gbox: no
radegast: no
serial: no
constant CW: no
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: no - no EMM support!
TONGFANG: no - no EMM support!
Bulcrypt: no - no EMM support!
Griffin: no - no EMM support!
DGCrypt: no - no EMM support!
cardreader_phoenix: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no

Sie müssen registriert sein, um Links zu sehen.

##################### General Instruction - oscam.dvbapi ######################
# Oscam will work properly without these configs, but you will get quicker #
# access in case of Zapping, especially when your CAID is not in first row of PMT #
# - prioritize the CAID from your provider that fits your Smartcard #
# - exclude other CAID´s from your provider, that doesn´t fit your Smartcard #
# #
# just enable examples that fits to your environment #
# #
# For further details see the OSCAM documentation #
###################################################################################
#I: 1833::4462
#I: 1833::4461
#I: 1833::0025
#I: 1833::07FF
#I: 1702::4462
#I: 1702::4461
#I: 1702::0025
#I: 1702::07FF
#I: 098C::4462
#I: 098C::4461
#I: 098C::0025
#I: 098C::07FF
#P: 0D05::4462
#P: 0D05::4461
#P: 0D05::0025
#P: 0D05::07FF
#I: 0d95
#I: 0648
#P: 0D05
#P: 1830
#P: 098C
#
############## ORF/Austriasat ###################
#P: 0d05
#I: 0d95
#I: 0648
########## Sky Germany S02 ##################
#P: 1702
#P: 1833
#I: 09c4
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
########## Sky Germany V13 ##################
#I: 1702
#I: 1833
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
############## HDplus HD01 ##################
#M: 1830:000000 1830:003411
############## HDplus HD02 ##################
#M: 1843:000000 1843:003411
#P: 1843 1
############## ORF new ICE ################
#P: 0d95
#I: 0d05
#I: 0648
############## SRG V2.6 #########################
#P: 0500:023800
#I: 0500:040810
############## SRG V4.0 #########################
#P: 0500:040810
#I: 0500:023800

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #6089
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
disablelog = 1
loghistorysize = 9999
fallbacktimeout = 2000
cachedelay = 120
nice = -1
maxlogsize = 10240
preferlocalcards = 1
saveinithistory = 1
[monitor]
appendchaninfo = 1
#[newcamd]
#port = 34000@1830:003411;34001@1702:000000;34002@1833:000000
#key = 0102030405060708091011121314
#[cs357x]
#port = 33999
#[cccam]
#port = 12000
#reshare = 2
#reshare_mode = 1
#version = 2.3.0
#forward_origin_card = 1
[dvbapi]
enabled = 1
au = 1
user = local-hdfreak
boxtype = duckbox
[webif]
httpport = 8888
httphelplang = de
httpuser = root
httppwd = pass
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httphideidleclients = 1

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-EMU-HDSC SVN #60-9053
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = local-hdfreak
keepalive = 1
au = hdplus
group = 1,2

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8395
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdplus
enable = 1
protocol = internal
device = /dev/sci0
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

oscam.services

#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[orfcw]
caid = 0D05,0D95
provid = 000000,000004,000010
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,3332,4E27,33A5,33A7,332D
[austriasat]
caid = 0D05,0D95
provid = 000000,000004,000010
srvid = 003E,0045,0046,07FA,07FD,07FF,2EFE,4461,4462,6FEE,6FEF,6FF0,6FF3,6FFF,003B
[SKY]
[skyall]
caid = 1702,1833,098C
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0012,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,
0024,0025,0026,0027,0029,002A,002B,0032,0034,0035,0037,0038,0039,003A,003B,003C,003D,003E,003F,0040,0041,0042,0043,0044,0045,0046,
0069,0070,0071,0072,006A,006B,006F,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,0096,0097,0098,
0099,009A,009B,009C,00A8,00DD,00DE,00DF,00FB,00FC,00FD,00FE,0105,0106,0107,0108,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,
012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,
4462,6FF1,7001,7009,700A,
[hdplus]
caid = 1830,1843,098C # weiße (1830) und schwarze (1843) SmartCard
provid = 003411,000000,008011
srvid = 5273,277E,EF14,EF77,5274,EF74,EF76,EF11,EF75,EF15,EF10,04E3,04E4,1519,27BC,2E9A,151A,126F,1270,126E

oscam.whitelist

#l:0D05:::::
#l:0D05:000004::::9C # ORF/Austriasat 19.2E
#l:0D05:000010::::9C # ORF/Austriasat 19.2E
#l:0D05:000000::::9C # ORF/Austriasat 19.2E
#l:1830:::::
#l:1830:000000::::92 # HD+ 19E
#l:1830:003411::::92 # HD+ 19E
#l:1830:008011::::92 # HD+ 19E
#l:098C:::::
#l:098C:000000::::91,59 # Sky Deutschland 19,2 E
#l:1833:::::
#l:1833:000000::::89 # Sky Deutschland 19.2E
#l:1833:000401::::89 # Sky Deutschland 19.2E
#l:1843:::::
#l:1843:000000::::89 # HD+ 19.2E
#l:1843:003411::::89 # HD+ 19.2E
#l:1843:008011::::89 # HD+ 19.2E
#l:1702:::::
#l:1702:000000::::93 # Sky Deutschland 19.2E

Es wäre sehr Nett von euch wenn ihr mal darüber schauen könnt.
Ich hoffe ich habe alle angaben gemacht damit Ihr mir helfen könnt.

Vielen Dank Jan

Pilot · 2. November 2014

AW: HD+02 wird nicht richtig eingelesen

teste es beim reader mal damit:
mhz = 500
cardmhz = 368

oscam neu starten. Danach Receiver neu booten

Mc.Klappstuhl · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

Schönen Guten Morgen,

hab beim Reader auf 500 Mhz gestellt und Oscam neu gestartet:

der Log von der Statutsseite des WI:

2014/11/03 07:30:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9257
2014/11/03 07:30:31 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/11/03 07:30:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/03 07:30:31 0 s signal handling initialized
2014/11/03 07:30:31 0 s 187 service-id's loaded in 8ms
2014/11/03 07:30:31 0 s 79 tier-id's loaded
2014/11/03 07:30:31 0 s 13 provid's loaded
2014/11/03 07:30:31 0 s ERROR: Cannot open file "/var/keys/oscam.guess" (errno=2 No such file or directory)
2014/11/03 07:30:31 0 s monitor: disabled
2014/11/03 07:30:31 0 s camd33: disabled
2014/11/03 07:30:31 0 s camd35: disabled
2014/11/03 07:30:31 0 s cs378x: disabled
2014/11/03 07:30:31 0 s newcamd: disabled
2014/11/03 07:30:31 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/11/03 07:30:31 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/11/03 07:30:31 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/11/03 07:30:31 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/11/03 07:30:31 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/11/03 07:30:31 0 s hdplus [internal] creating thread for device /dev/sci0
2014/11/03 07:30:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/03 07:30:31 0 s waiting for local card init
2014/11/03 07:30:31 535F08 h dvbapi: HTTP Server listening on port 8888
2014/11/03 07:30:31 524DB8 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2014/11/03 07:30:32 524DB8 r hdplus [internal] card detected
2014/11/03 07:30:32 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 07:30:32 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 07:30:32 524DB8 r hdplus [internal] Calculated work ETU is 6.40 us
2014/11/03 07:30:33 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 07:30:35 524DB8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/03 07:30:36 524DB8 r hdplus [internal] detect native nagra card
2014/11/03 07:30:39 524DB8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/03 07:30:41 524DB8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/03 07:30:41 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 07:30:41 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 07:30:41 524DB8 r hdplus [internal] Calculated work ETU is 6.40 us
2014/11/03 07:30:42 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 07:30:44 524DB8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/03 07:30:44 524DB8 r hdplus [internal] card system not supported
2014/11/03 07:30:44 524DB8 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/03 07:30:44 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 07:30:44 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 07:30:44 524DB8 r hdplus [internal] Calculated work ETU is 74.40 us
2014/11/03 07:30:45 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 07:30:45 524DB8 r hdplus [internal] Card responded ok for ifsd request of 160
2014/11/03 07:30:46 524DB8 r hdplus [internal] detect native nagra card
2014/11/03 07:30:48 524DB8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/03 07:30:50 524DB8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/03 07:30:50 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 07:30:50 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 07:30:50 524DB8 r hdplus [internal] Calculated work ETU is 6.40 us
2014/11/03 07:30:51 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 07:30:53 524DB8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/03 07:30:56 524DB8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/03 07:30:58 524DB8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/11/03 07:30:58 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 07:30:58 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 07:30:58 524DB8 r hdplus [internal] Calculated work ETU is 6.40 us
2014/11/03 07:30:59 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 07:31:01 524DB8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/03 07:31:01 524DB8 r hdplus [internal] card system not supported
2014/11/03 07:31:01 524DB8 r hdplus [internal] card initializing error
2014/11/03 07:31:01 0 s init for all local cards done
2014/11/03 07:31:01 0 s anti cascading disabled
2014/11/03 07:31:01 538250 c plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
2014/11/03 07:31:01 538250 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0

Oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8395
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
boxkey = A7642F57BC96D37C
detect = cd
mhz = 500
cardmhz = 368
group = 1
emmcache = 1,1,2

Die Karte wird meiner Ansicht nach auch mit 500Mhz erkannt, kann aber nicht gelesen werden. Ist das möglich mit 368Mhz und 500 Mhz?

EDIT: [TABLE="class: status, width: 100%"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x521f20 [/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]03.11.14 07:30:31[/TD]
[TD="class: statuscol11"]00:05:50[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:00[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x535f08 [/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]03.11.14 07:30:31[/TD]
[TD="class: statuscol11"]00:05:50[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:00[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x524db8 [/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]hdplus[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:05:50[/TD]
[TD="class: statuscol16"]ERROR

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[/TABLE]

jetzt steht beim Status Error. Also wieder auf 368Mhz zurück?

Vielen Dank Jan

Ducktrick · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

da fwhlt der rsa key ohne den gehts nicht. clock ist ok

https://www.digital-eliteboard.com/...nichts-geht-mehr-post2416784.html#post2416784

Pilot · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

Beim kopieren des rsa Keys und des boxkeys aufpassen, das keine Leerstellen enthalten sind. Wenn sie da sind: beseitigen.
Passiert ganz schnell beim kopieren.

Ducktrick · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

war wohl nen flüchtigkeits fehler von ihm

im ersten post im reader hatte er den key noch drin

Der vollständigkeit und dem verständniss wegen hier mal der reader wie er ausehen muss in der oscam.server

Code:

[reader]
label = hdplus
 enable = 1
 protocol = internal
 device = /dev/sci0
 boxkey = A7642F57BC96D37C
 rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
 detect = cd
 mhz = 500
 cardmhz = 368
 group = 1
 emmcache = 1,1,2

Hunchback1000 · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

dachte solche Keys dürfen hier nicht gepostet werden

Narf · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

Mittlerweile wurde das Verbot aufgehoben

Gesendet von meinem GT-I9195 mit Tapatalk

Pilot · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

Doch Hunch,
ist seit ca 1 Monat im DEB erlaubt.
Diese keys sind ja immer gleich und so verbreitet im welt weit Netz

Mc.Klappstuhl · 3. November 2014

AW: HD+02 wird nicht richtig eingelesen

habe die daten im oscam.Server geändert,
komisch ist das die sich quasi von selbst geändert haben??? hab die Keys nicht rausgelöst... aber egal

also die Keys eingefügt und Oscam neu gestartet, danach den Receiver.
Es funktioniert vielen Dank!!! Super Danke

[TABLE="class: status, width: 100%"]
[TR]
[TH="class: statuscol0"]hide
[/TH]
[TH="class: statuscol1"]Thread ID
[/TH]
[TH="class: statuscol2"]Type
[/TH]
[TH="class: statuscol3"]ID
[/TH]
[TH="class: statuscol4"]Label
[/TH]
[TH="class: statuscol5"]AU
[/TH]
[TH="class: statuscol6"]Crypted
[/TH]
[TH="class: statuscol7"]Address
[/TH]
[TH="class: statuscol8"]Port
[/TH]
[TH="class: statuscol9"]Protocol
[/TH]
[TH="class: statuscol10"]Login
[/TH]
[TH="class: statuscol11"]Online
[/TH]
[TH="class: statuscol12"]CAID:SRVID
[/TH]
[TH="class: statuscol13"]Current Channel
[/TH]
[TH="class: statuscol14"]LB Value/ Reader
[/TH]
[TH="class: statuscol15"]Idle
[/TH]
[TH="class: statuscol16"]Status
[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x521f20
[/TD]
[TD="class: statuscol2"]s
[/TD]
[TD="class: statuscol3"][/TD]
[TD="class: statuscol4"]root
[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]server
[/TD]
[TD="class: statuscol10"]03.11.14 10:22:11
[/TD]
[TD="class: statuscol11"]00:00:52
[/TD]
[TD="class: statuscol12"]0000:0000
[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:01
[/TD]
[TD="class: statuscol16"]OK
[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x535f08
[/TD]
[TD="class: statuscol2"]h
[/TD]
[TD="class: statuscol3"]1
[/TD]
[TD="class: statuscol4"]root
[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]http
[/TD]
[TD="class: statuscol10"]03.11.14 10:22:11
[/TD]
[TD="class: statuscol11"]00:00:52
[/TD]
[TD="class: statuscol12"]0000:0000
[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:00:46
[/TD]
[TD="class: statuscol16"]OK
[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 1/1
[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]0x524db8
[/TD]
[TD="class: statuscol2"]r
[/TD]
[TD="class: statuscol3"]1
[/TD]
[TD="class: statuscol4"]hdplus
[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF
[/TD]
[TD="class: statuscol7"]127.0.0.1
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]internal
[/TD]
[TD="class: statuscol10"]03.11.14 10:22:11
[/TD]
[TD="class: statuscol11"]00:00:52
[/TD]
[TD="class: statuscol12"]1843:EF74
[/TD]
[TD="class: statuscol13"]HD+: SAT.1 HD
[/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:00:05
[/TD]
[TD="class: statuscol16"]CARDOK

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Clients 1/1
[/TD]
[/TR]
[TR="class: c"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol2"]c
[/TD]
[TD="class: statuscol3"]1
[/TD]
[TD="class: statuscol4"]local-hdfreak
[/TD]
[TD="class: statuscol5"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol6"]OFF
[/TD]
[TD="class: statuscol7"]0.0.0.0
[/TD]
[TD="class: statuscol8"][/TD]
[TD="class: statuscol9"]dvbapi
[/TD]
[TD="class: statuscol10"]03.11.14 10:22:19
[/TD]
[TD="class: statuscol11"]00:00:44
[/TD]
[TD="class: statuscol12"]1843:EF74
[/TD]
[TD="class: statuscol13"]HD+: SAT.1 HD
[/TD]
[TD="class: statuscol14"]by hdplus (395ms)
[/TD]
[TD="class: statuscol15"]00:00:06
[/TD]
[TD="class: statuscol16"]OK
[/TD]
[/TR]
[/TABLE]

Der Vollständigkeit halber und zur Hilfe für andere User hier nochmal die files:

Logfile von der Statusseite:

2000/01/01 01:00:45 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1089
2000/01/01 01:00:45 0 s The current system time is smaller than the build date (Feb 21 2013). Waiting up to 60 seconds for time to correct
2014/11/03 10:22:11 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2014/11/03 10:22:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/03 10:22:11 0 s signal handling initialized
2014/11/03 10:22:11 0 s 187 service-id's loaded in 44ms
2014/11/03 10:22:11 0 s 79 tier-id's loaded
2014/11/03 10:22:11 0 s 13 provid's loaded
2014/11/03 10:22:11 0 s ERROR: Cannot open file "/var/keys/oscam.guess" (errno=2 No such file or directory)
2014/11/03 10:22:11 0 s monitor: disabled
2014/11/03 10:22:11 0 s camd33: disabled
2014/11/03 10:22:11 0 s camd35: disabled
2014/11/03 10:22:11 0 s cs378x: disabled
2014/11/03 10:22:11 0 s newcamd: disabled
2014/11/03 10:22:11 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/11/03 10:22:11 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/11/03 10:22:11 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/11/03 10:22:11 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/11/03 10:22:11 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/11/03 10:22:11 0 s hdplus [internal] creating thread for device /dev/sci0
2014/11/03 10:22:11 535F08 h dvbapi: HTTP Server listening on port 8888
2014/11/03 10:22:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/03 10:22:11 0 s waiting for local card init
2014/11/03 10:22:11 524DB8 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2014/11/03 10:22:12 524DB8 r hdplus [internal] card detected
2014/11/03 10:22:13 524DB8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/03 10:22:13 524DB8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/03 10:22:13 524DB8 r hdplus [internal] Calculated work ETU is 6.40 us
2014/11/03 10:22:14 524DB8 r hdplus [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/11/03 10:22:16 524DB8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/03 10:22:17 524DB8 r hdplus [internal] detect native nagra card
2014/11/03 10:22:18 524DB8 r hdplus [internal] found card system nagra
2014/11/03 10:22:18 524DB8 r hdplus [nagra] ROM: D N A S P 1 8 0
2014/11/03 10:22:18 524DB8 r hdplus [nagra] REV: M e r 0 0 0
2014/11/03 10:22:18 524DB8 r hdplus [nagra] SER: ############
2014/11/03 10:22:18 524DB8 r hdplus [nagra] CAID: 1843
2014/11/03 10:22:18 524DB8 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/03 10:22:18 524DB8 r hdplus [nagra] Prv.ID: 00 00 00 00
2014/11/03 10:22:18 524DB8 r hdplus [nagra] IRD ID: ############
2014/11/03 10:22:18 524DB8 r hdplus [nagra] active to: 2015/01/02 01:48
2014/11/03 10:22:18 524DB8 r hdplus [nagra] -----------------------------------------
2014/11/03 10:22:18 524DB8 r hdplus [nagra] |id |tier |valid from |valid to |
2014/11/03 10:22:18 524DB8 r hdplus [nagra] +----+--------+------------+------------+
2014/11/03 10:22:18 524DB8 r hdplus [nagra] |8011|0066 |2013/01/17 |2014/01/18 |
2014/11/03 10:22:18 524DB8 r hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/11/03 10:22:18 524DB8 r hdplus [nagra] |8011|0BEA |2014/01/22 |2015/02/27 |
2014/11/03 10:22:18 524DB8 r hdplus [nagra] -----------------------------------------
2014/11/03 10:22:18 524DB8 r hdplus [nagra] ready for requests
2014/11/03 10:22:19 0 s init for all local cards done
2014/11/03 10:22:19 0 s anti cascading disabled
2014/11/03 10:22:19 538C38 c plain dvbapi-client granted (local-hdfreak, au=on (1 reader))
2014/11/03 10:22:19 538C38 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2014/11/03 10:22:19 538C38 c dvbapi: Found 0 ECMpids and 3 STREAMpids in PMT
2014/11/03 10:22:19 538C38 c dvbapi: New program number: 003F (DMAX) [pmt_list_management 3]
2014/11/03 10:22:37 538C38 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2014/11/03 10:22:37 538C38 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2014/11/03 10:22:37 538C38 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2014/11/03 10:22:37 538C38 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2014/11/03 10:22:37 538C38 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2014/11/03 10:22:37 538C38 c dvbapi: Found 5 ECMpids and 6 STREAMpids in PMT
2014/11/03 10:22:37 538C38 c dvbapi: New program number: EF74 (SAT.1 HD) [pmt_list_management 3]
2014/11/03 10:22:38 538C38 c dvbapi: Start descrambling PID #1 (CAID: 1843) 1
2014/11/03 10:22:38 538C38 c local-hdfreak (1843&000000/0000/EF74/89:E0B2206E1A6F75719DBE92AD920D9C69): found (405 ms) by hdplus - SAT.1 HD
2014/11/03 10:22:42 524DB8 r hdplus [nagra] local-hdfreak emmtype=global, len=139, idx=0, cnt=1: written (639 ms)
2014/11/03 10:22:44 538C38 c local-hdfreak (1843&000000/0000/EF74/89:728056BF5E848A160F549210F50A3B86): found (389 ms) by hdplus - SAT.1 HD
2014/11/03 10:22:47 524DB8 r hdplus [nagra] local-hdfreak emmtype=global, len=139, idx=1, cnt=1: written (607 ms)
2014/11/03 10:22:51 538C38 c local-hdfreak (1843&000000/0000/EF74/89

30841B2D49203593D245BF009646830): found (387 ms) by hdplus - SAT.1 HD
2014/11/03 10:22:58 538C38 c local-hdfreak (1843&000000/0000/EF74/89:B8FEE0213A1846E15E6CA31FA739A058): found (395 ms) by hdplus - SAT.1 HD

oscam.version

Unix starttime: 1415006531
Starttime: 03.11.2014 10:22:11
Version: oscam-1.20-unstable_svn-r8395
Web interface support: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: no
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: no
camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: no
ghttp: no
gbox: no
radegast: no
serial: no
constant CW: no
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: no - no EMM support!
TONGFANG: no - no EMM support!
Bulcrypt: no - no EMM support!
Griffin: no - no EMM support!
DGCrypt: no - no EMM support!
cardreader_phoenix: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no

oscam.dvbapi

##################### General Instruction - oscam.dvbapi ######################
# Oscam will work properly without these configs, but you will get quicker #
# access in case of Zapping, especially when your CAID is not in first row of PMT #
# - prioritize the CAID from your provider that fits your Smartcard #
# - exclude other CAID´s from your provider, that doesn´t fit your Smartcard #
# #
# just enable examples that fits to your environment #
# #
# For further details see the OSCAM documentation #
###################################################################################
#I: 1833::4462
#I: 1833::4461
#I: 1833::0025
#I: 1833::07FF
#I: 1702::4462
#I: 1702::4461
#I: 1702::0025
#I: 1702::07FF
#I: 098C::4462
#I: 098C::4461
#I: 098C::0025
#I: 098C::07FF
#P: 0D05::4462
#P: 0D05::4461
#P: 0D05::0025
#P: 0D05::07FF
#I: 0d95
#I: 0648
#P: 0D05
#P: 1830
#P: 098C
#
############## ORF/Austriasat ###################
#P: 0d05
#I: 0d95
#I: 0648
########## Sky Germany S02 ##################
#P: 1702
#P: 1833
#I: 09c4
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
########## Sky Germany V13 ##################
#I: 1702
#I: 1833
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
############## HDplus HD01 ##################
#M: 1830:000000 1830:003411
############## HDplus HD02 ##################
#M: 1843:000000 1843:003411
#P: 1843 1
############## ORF new ICE ################
#P: 0d95
#I: 0d05
#I: 0648
############## SRG V2.6 #########################
#P: 0500:023800
#I: 0500:040810
############## SRG V4.0 #########################
#P: 0500:040810
#I: 0500:023800

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #6089
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
disablelog = 1
loghistorysize = 9999
fallbacktimeout = 2000
cachedelay = 120
nice = -1
maxlogsize = 10240
preferlocalcards = 1
saveinithistory = 1
[monitor]
appendchaninfo = 1
#[newcamd]
#port = 34000@1830:003411;34001@1702:000000;34002@1833:000000
#key = 0102030405060708091011121314
#[cs357x]
#port = 33999
#[cccam]
#port = 12000
#reshare = 2
#reshare_mode = 1
#version = 2.3.0
#forward_origin_card = 1
[dvbapi]
enabled = 1
au = 1
user = local-hdfreak
boxtype = duckbox
[webif]
httpport = 8888
httphelplang = de
httpuser = root
httppwd = pass
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httphideidleclients = 1

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-EMU-HDSC SVN #60-9053
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = local-hdfreak
keepalive = 1
au = hdplus
group = 1,2

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8395
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdplus
enable = 1
protocol = internal
device = /dev/sci0
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 500
cardmhz = 368
group = 1
emmcache = 1,1,2

oscam.services

#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[orfcw]
caid = 0D05,0D95
provid = 000000,000004,000010
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,3332,4E27,33A5,33A7,332D
[austriasat]
caid = 0D05,0D95
provid = 000000,000004,000010
srvid = 003E,0045,0046,07FA,07FD,07FF,2EFE,4461,4462,6FEE,6FEF,6FF0,6FF3,6FFF,003B
[SKY]
[skyall]
caid = 1702,1833,098C
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0012,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,
0024,0025,0026,0027,0029,002A,002B,0032,0034,0035,0037,0038,0039,003A,003B,003C,003D,003E,003F,0040,0041,0042,0043,0044,0045,0046,
0069,0070,0071,0072,006A,006B,006F,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,0096,0097,0098,
0099,009A,009B,009C,00A8,00DD,00DE,00DF,00FB,00FC,00FD,00FE,0105,0106,0107,0108,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,
012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,
4462,6FF1,7001,7009,700A,
[hdplus]
caid = 1830,1843,098C # weiße (1830) und schwarze (1843) SmartCard
provid = 003411,000000,008011
srvid = 5273,277E,EF14,EF77,5274,EF74,EF76,EF11,EF75,EF15,EF10,04E3,04E4,1519,27BC,2E9A,151A,126F,1270,126E

Nochmals vielen Dank

MfG Jan

Suche

Suche

HD+02 wird nicht richtig eingelesen

Mc.Klappstuhl

Newbie

Pilot

Mc.Klappstuhl

Newbie

Ducktrick

Super Elite User

Pilot

Ducktrick

Super Elite User

Hunchback1000

Narf

Pilot

Mc.Klappstuhl

Newbie

Ähnliche Themen

Spenden Unterstützung