HD 02 (1843) macht AU nur mit Oscam Client nicht mit CCcam Client

#!/bin/bash
#
### CONFIG - START




# Enable colored output-lines on shell? [yes/no]
ENABLECOLORS="yes"


# TRUNKs
svnURL="http://178.17.169.213/svn/oscam/trunk"
svnURL2="http://oscam.to/svn/oscam/trunk"


# TAGs
svnURLtags="http://178.17.169.213/svn/oscam/tags"
svnURLtags2="http://oscam.to/svn/oscam/tags"
svnTAGSver="1.10"




### CONFIG - END




. /var/emu/script/functions.sh
[ -z $IPURL ] && clear && echo -e "\033[1;31mVariablen Konfigurationsfehler!\033[0m" && exit 1
[ -z $OSBIN ] && clear && echo -e "\033[1;31mVariablen Konfigurationsfehler!\033[0m" && exit 1
[ -z $CAMBINS ] && clear && echo -e "\033[1;31mVariablen Konfigurationsfehler!\033[0m" && exit 1
ScriptVer="1.12"


if [ "$ENABLECOLORS" = "yes" ]; then
	ROT=`tput setaf 1`
	GRUEN=`tput setaf 2`
	BOLD=`tput bold`
	NORM='tput op && tput sgr0'
else
	ROT="" ; GRUEN="" ; BOLD="" ; NORM=""
fi


if [ `uname -m` = 'x86_64' ]; then
	SYSBIT="64"
	OSCAMbin="oscam.x86_64"
else
	SYSBIT="32"
	OSCAMbin="oscam.x86"
fi


CPUcores=$(grep ^processor /proc/cpuinfo | wc -l)
[ -z "$CPUcores" ] && CPUcores=1
[[ "$CPUcores" < "1" ]] && CPUcores=1


#Linux Version? (Debian/Ubuntu)
if [ -f /usr/bin/lsb_release ]; then
	_LINUX=$(lsb_release -d|cut -d":" -f2|awk {'print $1'})
	if [ "$_LINUX" = "Debian" ]; then
		LINUXVERSION=$(lsb_release -d|cut -d":" -f2|awk {'print $3'})
	elif [ "$_LINUX" = "Ubuntu" ]; then
		LINUXVERSION=$(lsb_release -d|cut -d":" -f2|awk {'print $2'})
	fi
fi
if [ -z "$LINUXVERSION" ]; then
	[ -f /etc/debian_version ] && LINUXVERSION=$(cat /etc/debian_version|cut -c1)
fi


#### functions


function collect_needed_packs () {
	InstallPAK=""
	NEEDPACK=${needpacks
[*]}
	for PACK in $NEEDPACK; do
		if [ -z "$(dpkg -l | grep "ii" | awk {'print $2'} | grep -xi $PACK)" ];then
			[ -z "$InstallPAK" ] && InstallPAK="$PACK" || InstallPAK+=" $PACK"
		fi
	done
}


install_packs() {
	echo " "
	echo "Installiere benoetigte Pakete zum Kompilieren von OScam.."
	echo " "
	sleep 2
	collect_needed_packs
	apt-get clean
	apt-get update -f
	#echo -e "\n... $InstallPAK ...\n"
	apt-get install -y $InstallPAK
	# libusb-1.0-0-dev
	InstallLIBUSB=0
	if [ -n "$LINUXVERSION" ]; then
		if [ "$_LINUX" = "Debian" ]; then
			if [ "$(echo $LINUXVERSION|cut -c1)" -gt "7" ]; then
				InstallLIBUSB=1
			elif [ "$(echo $LINUXVERSION|cut -c1)" = "7" ]; then
				InstallLIBUSB=1
			elif [ "$(echo $LINUXVERSION|cut -c1)" = "6" ]; then
				InstallLIBUSB=1
			fi
		elif [ "$_LINUX" = "Ubuntu" ]; then
			InstallLIBUSB=1
		fi
	else
		InstallLIBUSB=1
	fi
	[ "$InstallLIBUSB" == "1" ] && apt-get install -y $NP
	echo " "; sleep 1
	apt-get clean
	if [ "`find / -name libusb.h`" = "" ]; then
		install_libusb "1.0.9"
	fi
	touch $CheckInstalledFile >/dev/null 2>&1
	echo " "
}


install_libusb() {
	if [ -z "$1" ]; then
		LibVer="1.0.8"
	else
		LibVer=$1
	fi
	cp -f /var/emu/libs/libusb-${LibVer}.tar.bz2 /tmp/ >/dev/null 2>&1
	if [ ! -f "/tmp/libusb-${LibVer}.tar.bz2" ]; then
		echo -n "Lade libusb-${LibVer}.."
		wget -o $WGETLOG $IPURL/scripts/lib/libusb-${LibVer}.tar.bz2 -P /tmp/ >> /dev/null 2>&1
		if [ ! "`grep '200 OK' $WGETLOG`" = "" ] ; then
			echo " done"
			rm -f $WGETLOG
		else
			echo -e "\033[1;31mVerbindungsfehler! Abbruch!\033[0m"
			rm -f $WGETLOG
			exit 1
		fi
	fi
	echo -n "Installiere libusb-${LibVer}.."
	cd /tmp
	if [ -d "libusb-${LibVer}" ]; then
		rm -rf libusb-${LibVer}
	fi
	tar xjf libusb-${LibVer}.tar.bz2 >> /dev/null 2>&1
	echo -n ".entpackt."
	cd /tmp/libusb-${LibVer} >> /dev/null 2>&1
	echo -n ".configure."
	./configure >> /dev/null 2>&1
	echo -n ".make."
	make -j$CPUcores >> /dev/null 2>&1
	echo -n ".make install."
	make install >> /dev/null 2>&1
	if [ $? -ne "0" ]; then
		echo " "
		echo -e " \033[1;31mInstallation fehlgeschlagen!\033[0m"
		echo "Bitte versuchen Sie den manuellen Weg um heraus zu finden was hierbei schief geht:"
		echo " cd /tmp/libusb-${LibVer}"
		echo " ./configure"
		echo " make"
		echo " make install"
		echo "-------------------------------------------------------------------------------"
		exit 1
	else
		echo " done"
		rm -rf /tmp/libusb-${LibVer}* >> /dev/null 2>&1
		ln -fs /usr/local/lib/libusb-1.0.so.0 /lib/libusb-1.0.so.0
	fi
}


CheckInstalledPacks() {
	[ ! -f "$CheckInstalledFile" ] && install_packs
	[ ! -f "/lib/libusb-1.0.so.0" ] && ln -fs /usr/local/lib/libusb-1.0.so.0 /lib/libusb-1.0.so.0 >/dev/null 2&>1
}


renewbinary() {
	rm -rf $OSBIN
	mv -f $filedir_tmp/$oscamBUILD/build_dir/oscam $OSBIN
	echo " "
	echo "Die neue $OSVERSION befindet sich in $CAMBINS/oscam/"
	echo " "
}


OScamRestart() {
	if [ "$AutoCompileIT" = "0" ]; then
		echo "-------------------------------------------------------------------------------"
		echo ""
		echo "Soll OScam jetzt neu gestartet werden?"
		echo -en "\033[1;33m[J]a  | []Nein \033[0m"
		read key
		case $key in
			[JjYy]|[jJ][aA]|[yY][eE][sS])
				echo " "
				oscam restart
			;;
			*)
				sleep 0.5
			;;
		esac
		echo " "
		echo "-------------------------------------------------------------------------------"
		echo " "
	else
		oscam restart
	fi
}


WhichRevision() {
	echo "-------------------------------------------------------------------------------"
	echo ""
	echo "Moechten Sie eine bestimmte svn Revisionsnummer kompilieren oder die aktuelle?"
	echo -en "\033[1;33m[4801]  | []Aktuelle \033[0m"
	read key
	case $key in
		[0-9][0-9][0-9][0-9])
			echo " "
			revision_num=$key
		;;
		"")
			revision_num=""
		;;
		*)
			echo -e " \033[1;31mUngueltige Eingabe!\033[0m"
			sleep 1 ; WhichRevision
		;;
	esac
	echo " "
	echo "-------------------------------------------------------------------------------"
	echo " "
}


#### vars
CheckInstalledFile="/var/emu/conf/.oscam_compile_check.OK"
NP_old="build-essential cmake gcc subversion libusb-dev libssl-dev tar bzip2 gzip wget gettext"
NP1="build-essential autoconf automake cmake make patch gcc g++ pkg-config subversion"
NP2="libccid libtool libglib2.0-dev libssl-dev libpcsclite1 libpcsclite-dev"
NP3="gettext tar bzip2 gzip ncurses-bin flex bison wget libpng3 zlib1g-dev sudo"
NP="libusb-1.0-0-dev"
needpacks=("$NP1" "$NP2" "$NP3")
oscamBUILD="oscam-svn"
WGETLOG="/tmp/.wget.log"
filedir_tmp_tool="/tmp/compile/toolchains"
filedir_tmp="/tmp/compile"
ScriptName=$(basename $0)
svnABLE="trunk"
AutoCompileIT=0


#### main


$NORM
echo "$ScriptName v$ScriptVer"


case "$1" in
	[hH][eE][lL][pP]|[hH][iI][lL][fF][eE]|\?)
		echo "Usage: $0"
		echo "or: $0 <revision>"
		echo "or: $0 -auto"
		echo "or: $0 -tags"
		echo "or: $0 -tags -auto"
		exit 0
	;;
	-tag*|--tag*)
		svnABLE="tags"
		oscamBUILD="oscam-tags"
	;;
	-auto|--auto)
		AutoCompileIT=1	
	;;
esac


case "$2" in
	-auto|--auto)
		AutoCompileIT=1	
	;;
esac


[ ! -d "$filedir_tmp" ] && mkdir -p $filedir_tmp && chmod 777 $filedir_tmp >/dev/null 2>&1 
cd $filedir_tmp


CheckInstalledPacks


[ "$AutoCompileIT" = "0" ] && WhichRevision || revision_num=""


if [ -z "$revision_num" ]; then
	if [ "$svnABLE" = "tags" ]; then
		revision_num=$(svn info $svnURLtags/$svnTAGSver | grep '^Revision:' | sed -e 's/^Revision: //')
		echo "Lade aktuelle $oscamBUILD $svnTAGSver Revision ${revision_num}..."
		svn co $svnURLtags/$svnTAGSver ${filedir_tmp}/${oscamBUILD}
		if [ $? -ne "0" ]; then
			echo -e " \033[1;31mVerbindungsfehler! Versuche Mirror..\033[0m"
			svn co $svnURLtags2/$svnTAGSver ${filedir_tmp}/${oscamBUILD}
		fi
	else
		revision_num=$(svn info $svnURL | grep '^Revision:' | sed -e 's/^Revision: //')
		echo "Lade aktuelle $oscamBUILD Revision ${revision_num}..."
		svn co $svnURL ${filedir_tmp}/${oscamBUILD}
		if [ $? -ne "0" ]; then
			echo -e " \033[1;31mVerbindungsfehler! Versuche Mirror..\033[0m"
			svn co $svnURL2 ${filedir_tmp}/${oscamBUILD}
		fi
	fi
else
	if [ "$svnABLE" = "tags" ]; then
		echo "Lade $oscamBUILD $svnTAGSver Revision ${revision_num}..."
		svn co -r $revision_num $svnURLtags/$svnTAGSver ${filedir_tmp}/${oscamBUILD}
		if [ $? -ne "0" ]; then
			echo -e " \033[1;31mVerbindungsfehler! Versuche Mirror..\033[0m"
			svn co -r $revision_num $svnURLtags2/$svnTAGSver ${filedir_tmp}/${oscamBUILD}
		fi
	else
		echo "Lade $oscamBUILD Revision ${revision_num}..."
		svn co -r $revision_num $svnURL ${filedir_tmp}/${oscamBUILD}
		if [ $? -ne "0" ]; then
			echo -e " \033[1;31mVerbindungsfehler! Versuche Mirror..\033[0m"
			svn co -r $revision_num $svnURL2 ${filedir_tmp}/${oscamBUILD}
		fi
	fi
fi
if [ $? -ne "0" ]; then
	echo " "
	echo -e " \033[1;31mVerbindungsfehler! Abbruch!\033[0m"
	exit 1
fi
echo "  "




if [ ! -d "${filedir_tmp}/${oscamBUILD}" ]; then
	echo $ROT "ERROR: ${filedir_tmp}/${oscamBUILD} existiert nicht. Download fehlgeschlagen? Abbruch!" ; $NORM
	exit 1
else
	if [ "$AutoCompileIT" = "0" ]; then
		echo " "
		echo "Im folgenden Menue koennen Sie einstellen was OScam unterstuetzen soll "
		echo "Mit der <Leer-taste> waehlen sie was aus.."
		echo "Mit der <Enter-taste> bestaetigen sie.."
		echo "Mit der <ESC-taste> kehren sie ein Menue zurueck.."
		echo " "
		read -p "Druecken Sie bitte <Enter> um fortzufahren..."
	else
		if [ -f "$filedir_tmp/oscam-config.h" ]; then
			cp -f $filedir_tmp/oscam-config.h ${filedir_tmp}/${oscamBUILD}/
		fi
	fi
fi


cd ${filedir_tmp}/${oscamBUILD}
[ "$AutoCompileIT" = "0" ] && ./config.sh -g


echo " "
echo "Bereite ${SYSBIT}bit Kompilierung vor.."
echo " "
sleep 3
#read -p "Druecken Sie bitte <Enter> um fortzufahren..."


mkdir -p build_dir ; cd build_dir ; make clean >/dev/null 2>&1
cmake -DCS_CONFDIR=/var/etc/ ..


echo " "
echo "Folgendes kompilieren kann einige Zeit in Anspruch nehmen... "
echo " "
[ "$AutoCompileIT" = "0" ] && read -p "Druecken Sie bitte <Enter> um fortzufahren..."


make -j$CPUcores


if [ ! -f "$filedir_tmp/$oscamBUILD/build_dir/oscam" ]; then
	echo $ROT "ERROR: compile fehlgeschlagen? Abbruch!" ; $NORM
	exit 1
else
	echo " "
	renewbinary
	sleep 1
	echo " "
	# beep
	echo -en "\007"
	echo $GRUEN "Neue ${oscamBUILD} build $revision_num erfolgreich erstellt!" ; $NORM
fi


cd /
## cleanup
[ "$AutoCompileIT" = "0" ] && rm -rf ${filedir_tmp}/${oscamBUILD}
rm -f /tmp/config.mak.*
rm -f /tmp/oscam-config.h.bak


echo " "
OScamRestart
echo $GRUEN "Fertig! ;-)" ; $NORM
echo " "


exit 0