Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

[essential1210]

Hi,

bin mit meinem Latein am Ende und wollte mich mal hier draufklinken... Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

oscam.server

Spoiler

[reader]
label = V14
enable = 1
protocol = internal
#device = /dev/sci0
device = 0
caid = 098C
services =SkyGermanyMitHDPlus
boxid = 12345678
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,10
emmcache = 1,3,2
ins7e11 = 15
ndsversion = 2
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
ecmwhitelist = 098C:98,9B,97,57,91
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255
auprovid = 000001
autospeed = 1

oscam.log

Spoiler

[LIST]
[*]2015/03/14 13:34:22 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9662 (arm-cx2450x-linux-gnueabi-coolapi-libusb) 
[*]2015/03/14 13:34:22 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 583 
[*]2015/03/14 13:34:23 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0 
[*]2015/03/14 13:34:23 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled 
[*]2015/03/14 13:34:23 0 s signal handling initialized 
[*]2015/03/14 13:34:23 0 s monitor: initialized (fd=14, port=5555, prio=1) 
[*]2015/03/14 13:34:23 0 s newcamd: initialized (fd=15, port=10001, prio=1) 
[*]2015/03/14 13:34:23 0 s -> CAID: 098C PROVID: 000000 
[*]2015/03/14 13:34:23 0 s V14 [internal] creating thread for device 0 
[*]2015/03/14 13:34:23 0 s loadbalancer: can't read from file /tmp/.oscam/stat 
[*]2015/03/14 13:34:23 0 s waiting for local card init 
[*]2015/03/14 13:34:23 30270EB8 r V14 [internal] Reader initialized (device=0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz 
[*]2015/03/14 13:34:23 30211180 h webif: decompressed 150463 bytes back into 363896 bytes 
[*]2015/03/14 13:34:23 30211180 h HTTP Server running. ip=0.0.0.0 port=12345 
[*]2015/03/14 13:34:24 30270EB8 r V14 [internal] card detected 
[/LIST]

Danke schon mal vielmals für Eure Unterstützung

 

[dodo83]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

hi,

• 2015/03/14 13:34:24 30270EB8 r V14 [internal] card detected

das interessante kommt danach

Spoiler

[reader]
label = V14
enable = 1
protocol = internal
device = 0
caid = 098C
boxid = 12345678
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,10
ins7e11 = 15
ndsversion = 2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1

1x EMMCACHE reicht
blockemm_bylen RAUS
blockemm-u = 1 REIN
erstmal keine Services oder Whitelist, AUprovid, etc.
eventuell mit CARDMHZ auf 357 testen

 

[cojo]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

und auch mal Oscam auf mindestens 9848 aktualisieren,deine ist veraltet

version 1.20-unstable_svn, build r9662

 

[essential1210]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

dank Euch für die schnellen Antworten!
oscam find ich für arm nix neueres... Hatte hier geschaut:

Sie müssen registriert sein, um Links zu sehen.

Die svn10570 bekomm ich nicht so recht zum laufen...

@dodo83: hab die Config angepasst und mit sowohl 2700 also auch 357 getestet... bleibt leider unverändert

[/FONT][/COLOR]
[LIST]
[*]2015/03/14 14:06:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9662 (arm-cx2450x-linux-gnueabi-coolapi-libusb)
[*]2015/03/14 14:06:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 582
[*]2015/03/14 14:06:13 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
[*]2015/03/14 14:06:13 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
[*]2015/03/14 14:06:13 0 s signal handling initialized
[*]2015/03/14 14:06:13 0 s monitor: initialized (fd=14, port=5555, prio=1)
[*]2015/03/14 14:06:13 0 s newcamd: initialized (fd=15, port=10001, prio=1)
[*]2015/03/14 14:06:13 0 s -> CAID: 098C PROVID: 000000
[*]2015/03/14 14:06:13 0 s V14 [internal] creating thread for device 0
[*]2015/03/14 14:06:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
[*]2015/03/14 14:06:13 0 s waiting for local card init
[*]2015/03/14 14:06:13 30270EB8 r V14 [internal] Reader initialized (device=0, detect=cd, mhz=1, cardmhz=357)
[*]2015/03/14 14:06:13 30211180 h webif: decompressed 150463 bytes back into 363896 bytes
[*]2015/03/14 14:06:13 30211180 h HTTP Server running. ip=0.0.0.0 port=12345
[*]2015/03/14 14:06:14 30270EB8 r V14 [internal] card detected
[/LIST]
[COLOR=#000000][FONT=Verdana]

 

[dodo83]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

da muss doch was nach dem CARD DETECTED kommen im log........

 

[cojo]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

wie nix neueres?
Musst nur mal richtig schauen

Link ist nicht mehr aktiv.


Link ist nicht mehr aktiv.

 

[essential1210]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

blind... sorry und danke für die Links!
So, nun auf r10001.

Hier noch mal ein neues Log (hatte es auch mit 2700 cardmhz versucht...)

Spoiler

KAL Trace Initializaing ...
KAL Trace init Complete
KAL mmap'ings:
  cached[0] = 0x30220000 (0x01000000)
15:00:15        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10001 (arm-cx2450x-linux-gnueabi-coolapi-libusb)
15:00:15        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 656
uncached[0] = 0x30420000 (0x06800000)
 content[0] = 0x36320000
  cached[1] = 0x3b720000
uncached[1] = 0x3b720000
 content[1] = 0x3cb20000
15:00:15        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
15:00:15        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
15:00:15        0 s signal handling initialized
15:00:15        0 s monitor: initialized (fd=14, port=5555, prio=1)
15:00:15        0 s newcamd: initialized (fd=15, port=10001, prio=1)
15:00:15        0 s -> CAID: 098C PROVID: 000000
15:00:15        0 s V14 [internal] creating thread for device 0
15:00:15        0 s loadbalancer: can't read from file /tmp/.oscam/stat
15:00:15        0 s waiting for local card init
15:00:15   19E2C8 r V14 [internal] Reader initialized (device=0, detect=cd, mhz=1, cardmhz=357)
15:00:15   1A52B0 h webif: decompressed 156144 bytes back into 369676 bytes
15:00:15   1A52B0 h HTTP Server running. ip=0.0.0.0 port=12345
15:00:16   19E2C8 r V14 [internal] card detected
15:00:16   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:16   19E2C8 r V14 [internal] ATR: 00 A0 15 BD 69 00 00
15:00:16   19E2C8 r V14 [internal] ERROR: Could not read reader->convention
15:00:16   19E2C8 r V14 [internal] Error activating card.
15:00:17   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r V14 [internal] ATR: 3F B0 E4 18 00
15:00:17   19E2C8 r [Cool_SetProtocol:311] cnxt_smc_start_pps: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r V14 [internal] Warning: F=0 is invalid, forcing FI=1
15:00:17   19E2C8 r V14 [internal] Init card protocol T0, FI=1, F=0, D=8, N=0
15:00:17   19E2C8 r V14 [internal] Calculated work ETU is 4650.00 us reader mhz = 1
15:00:17   19E2C8 r [Cool_FastReset:64] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r [Cool_WriteSettings:267] cnxt_smc_set_F_D_factors: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r [Cool_WriteSettings:272] cnxt_smc_set_convention: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r [Cool_WriteSettings:282] cnxt_smc_set_config_timeout: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r [Cool_Print_Comm_Parameters:195] cnxt_smc_get_comm_parameters: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:17   19E2C8 r V14 [internal] Driver Settings: Convention=Inverse, Protocol=T0, FI=0, F=372, N=0, DI=0, D=1, PI1=0, PI2=202, II=154, TXRetries=0, RXRetries=8, FilterProtocolBytes=0
15:00:17   19E2C8 r V14 [internal] Driver Timeouts: CardActTime=45004, CardDeactTime=0, ATRSTime=65535, ATRDTime=19200, BLKTime=9588, CHTime=9588, CHGuardTime=0, BKGuardTime=0
15:00:17   19E2C8 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 0.01 (specified in reader->mhz)
15:00:18   19E2C8 r V14 [internal] card system not supported
15:00:18   19E2C8 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
15:00:18   19E2C8 r [Cool_FastReset:64] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:18   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:18   19E2C8 r V14 [internal] ATR: 00 00
15:00:18   19E2C8 r V14 [internal] ERROR: Could not read reader->convention
15:00:18   19E2C8 r V14 [internal] Error activating card.
15:00:19   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:19   19E2C8 r V14 [internal] Error activating card.
15:00:19   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
15:00:19   19E2C8 r V14 [internal] Error activating card.
15:00:20   19E2C8 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
15:00:20   19E2C8 r V14 [internal] card initializing error
15:00:21        0 s init for all local cards done
15:00:21        0 s anti cascading disabled

 

[krikssus]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

15:00:16 19E2C8 r V14 [internal] ERROR: Could not read reader->convention
15:00:16 19E2C8 r V14 [internal] Error activating card.
15:00:20 19E2C8 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
15:00:20 19E2C8 r V14 [internal] card initializing error

sind alles reader errors, sprich die oscam.server passt nicht

da gibts schon mal einen fehler.
Hast du die config wie von dodo beschrieben geändert?

 

[essential1210]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

jopp, ist übernommen... so sieht's aus die oscam.server

[reader]
label                         = V14
protocol                      = internal
device                        = 0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
mhz                           = 1
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,10
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2

 

[krikssus]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

ich muss gestehen ich kenn mich mit reci oscam leider nicht so gut aus, aber mir fehlt irgendwie das device welches er ansprechen soll.
Du sagst im protocol = internal aber device = 0. befürchte dass er damit nichts anfangen kann.

gib das mal bei device rein. device = /dev/sci0 und starte nochmals neu uns bitte wieder log posten

 

[essential1210]

AW: Oscam Sky V14 NEEDINIT (no entitlements)

dachte immer device 0 ist bei der coolstream der untere Port und device 1 der obere... daher die 0

habs ma wie von Dir vorgeschlagen umgestellt und hier das log

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sat Mar 14 16:30:02 2015
-------------------------------------------------------------------------------
2015/03/14 16:30:02        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10001 (arm-cx2450x-linux-gnueabi-coolapi-libusb)
2015/03/14 16:30:02        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3006
2015/03/14 16:30:02        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/03/14 16:30:02        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/03/14 16:30:02        0 s signal handling initialized
2015/03/14 16:30:02        0 s monitor: initialized (fd=14, port=5555, prio=1)
2015/03/14 16:30:02        0 s newcamd: initialized (fd=15, port=10001, prio=1)
2015/03/14 16:30:02        0 s -> CAID: 098C PROVID: 000000
2015/03/14 16:30:02        0 s V14 [internal] creating thread for device /dev/sci0
2015/03/14 16:30:02        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/14 16:30:02        0 s waiting for local card init
2015/03/14 16:30:02   19E2C8 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/03/14 16:30:02   1A52B0 h webif: decompressed 156144 bytes back into 369676 bytes
2015/03/14 16:30:02   1A52B0 h HTTP Server running. ip=0.0.0.0 port=12345
2015/03/14 16:30:03   19E2C8 r V14 [internal] card detected
2015/03/14 16:30:03   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
2015/03/14 16:30:03   19E2C8 r V14 [internal] ATR: 00 00
2015/03/14 16:30:03   19E2C8 r V14 [internal] ERROR: Could not read reader->convention
2015/03/14 16:30:03   19E2C8 r V14 [internal] Error activating card.
2015/03/14 16:30:04   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
2015/03/14 16:30:04   19E2C8 r V14 [internal] Error activating card.
2015/03/14 16:30:04   19E2C8 r [Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)
2015/03/14 16:30:04   19E2C8 r V14 [internal] Error activating card.
2015/03/14 16:30:05   19E2C8 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/14 16:30:05   19E2C8 r V14 [internal] card initializing error
2015/03/14 16:30:05        0 s init for all local cards done
2015/03/14 16:30:05        0 s anti cascading disabled

 

[krikssus]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

wie gesagt ich kenn den reci nicht, deswegen wars nur ein test. kannst bitte wieder rausgeben was ich dir gesagt habe.

 

[Zwenny]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

hat die Coolstream zwei Schächte, dann device = /dev/sci1 mal testen

 

[essential1210]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

wie gesagt ich kenn den reci nicht, deswegen wars nur ein test. kannst bitte wieder rausgeben was ich dir gesagt habe.

dank Dir trotzdem... ein Versuch war es wert
Mich wundert ja nur das "r V14 [internal] card detected"... also findet er doch die Karte

- - - - - - - - - -

hat die Coolstream zwei Schächte, dann device = /dev/sci1 mal testen

geht genau so leider nicht... bzw ändert sich im Log nix. Danke trotzdem!

 

[krikssus]

AW: Habe eine Coolstream und selbiges Problem. Hier mal meine Daten:

was ich nicht verstehe ist folgende meldung in deinem log
[Cool_Reset:137] cnxt_smc_get_atr: API ERROR 23 (CNXT_STATUS_NOT_AVAILABLE)

da gehts eigentlich immer um eine schnittstelle die einen error macht. nur bin ich mir unsicher ob das oscam macht oder dein reci.
Sieht für mich so aus als würde da irgendwas in der schnittstelle software seitig fehlen. irgendein treiber oder sowas in der art.